6956 nsnfile_master.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

Printed on: 12/14/2023, 6:36:49 PM Page 1

8115-01-694-6956 UI: EA

CRATE, SHIPPING

DESCRIPTION

ITEM NAME CRATE, SHIPPING

I.A.W. FEDERAL SUPPLY P/N FS154LS

OUTSIDE WIDTH 23.43 INCHES

OUTSIDE LENGTH 44.88 INCHES

OUTSIDE DEPTH 24.61 INCHES

INSIDE WIDTH 19.61 INCHES

INSIDE LENGTH 41.81 INCHES

INSIDE DEPTH 17.2 INCHES

COMPARTMENT QUANTITY 1

EXTERNAL CUBIC CAPACITY 14.98 CUBIC FEET

INTERNAL CUBIC CAPACITY 8.160 CUBIC FEET

OVERALL LOAD CAPACITY 1,102.0 POUNDS MAXIMUM

OVERALL STACKED LOAD CAPACITY 4,409.0 POUNDS MAXIMUM

STYLE DESIGNATOR CONEX CARGO TRANSPORTER

OVERALL MATERIAL PLASTIC

OVERALL COLOR BLACK

ASSEMBLY FORM FOLDED

STACKING FEATURE YES

INCLUDES PALLET, COVER AND SLEEVE

HANDLING FACILITY TYPE PALLET

FURNISHED ITEMS SLEEVE

CLOSURE METHOD DETACHABLE COVER, DETACHABLE ENDS,

DETACHABLE SIDES AND HINGED SIDES

CLOSURE FASTENING TYPE SLIDE LATCH

COVER DEPTH 5.00 INCHES (+/- 10 PERCENT)

CONTAINER LOAD HAZARD DESIGNATION TYPE III

BOX MANUFACTURER CERTIFICATE REQUIRED

HUMIDITY CONTROL DESIGN FEATURE YES

ENVIRONMENTAL PROTECTION WEATHER RESISTANT

BIOBASED CONTENT PERCENTAGE 100 PERCENT

SPECIAL FEATURES THERMAL SHIPPING CONTAINERS,

DURABLE AND BIOBASED

PART NAME ASSIGNED MEGA PAK JUMBO

BY CONTROLLING AGENCY

PACKAGING/PACKING

Printed on: 12/14/2023, 6:36:49 PM Page 2

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight

Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD

129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC

Guidelines for treatment of non-manufactured wood packaging: The International Plant

Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the

IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

Printed on: 12/14/2023, 6:36:49 PM Page 3

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT

WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the

Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.