Natchez Trace No Passing Zones Memo_v3.pdf
PDF 1 MB Posted
- Attached to
- Natchez Trace Parkway
- Solicitation number
- 693C73-27-B-000006
About this file
This document is a No Passing Zone Study prepared by WSP for the National Park Service regarding the Natchez Trace Parkway between mileposts 121 and 204. The study evaluates the marking and placement of existing no-passing zones (NPZs) to determine if they meet current standards and identifies recommendations for modifications in preparation for a repaving and pavement marking refresh project. The evaluation was conducted using three phases: a preliminary desktop review utilizing Google Earth and online resources, a field review with dashcam confirmation and site photography, and a final review employing GIS-based vertical profile analysis and LiDAR survey verification for critical locations.
The evaluation criteria require 800 feet of sight distance for horizontal and vertical curves (measured at 42 inches above pavement), and 425 feet of sight distance for intersections measured approximately 12 feet from the roadway edge. The study area operates under a 50 mph speed limit with an average daily traffic count of 1,100 vehicles as of 2023. The final recommendations identified 41 existing zones with 15 recommended for removal, 3 new zones to be recommended, and 2 existing zones requiring extension. Additionally, 8 locations with tree overgrowth impacting sight lines can be resolved through vegetation trimming (maintaining an 18-foot buffer from the roadway edge and 13-foot clearance above centerline pavement) rather than implementing new NPZs. The minimum distance between NPZs is established at 400 feet, and bridges with at least 2-foot shoulders and 11-foot lanes were excluded from NPZ consideration. All recommendations were coordinated with the National Park Service and developed using AASHTO Greenbook 2018 7th Edition, MUTCD 11th Edition, and Mississippi Department of Transportation standards.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Natchez Trace Parkway
No Passing Zone Study
Purpose
Natchez Trace Parkway is a historic scenic roadway that connects New Orleans, Louisiana to Nashville, Tennessee. Natchez Trace Parkway has been constructed and repaired in many phases over the years, meeting di�ering criteria and standards for di�erent phases of work. The
Parkway is currently scheduled for repaving and refreshing pavement markings between milepost
121 and 204. In preparation for the repaving project, the National Park Service (NPS) has commissioned WSP to evaluate the marking and placement of existing NPZs to determine if they are appropriate or if changes should be made to the location and lengths. Further, NPZs were evaluated for consistency in their use and to meet current standards, specifically Mississippi
Department of Transportation (MDOT) PM-1 (from the MDOT roadway design manual), AASHTO
Greenbook 2018 7th Edition (Tables 3-1 and 3-2), and MUTCD 11th Edition (Figure 3b-4 and Table 3b-
1).
Methodology
The evaluation of passing zones was conducted in several phases, a preliminary desktop review, a field review, and a final review. Existing data of the parkway was found either in the field or through online recourses, the ADT of the parkway near our project area as 1100 as of 2023 and the speed limit for the corridor is 50 mph. Final recommendations are based on criteria from AASHTO and
MUTCD as well as through discussions with NPS. During the review existing no passing zones were identified and tested against current criteria to see if they still were necessary. In addition, the corridor was reviewed to see if any new no passing zones should be implemented. The basic criteria for determining where NPZs are and are not recommended is as follows:
• Horizontal Curves: 800’ of sight distance
• Vertical Curves: 800’ of sight distance at 42” above the pavement
• Intersections: 425’ of sight distance in either direction, measured ~12’ from the edge of
Natchez Trace Parkway. Only intersecting public roads and pull-o�s were considered.
• Eliminate existing NPZs that do not meet current criteria
• Where sight distance is not su�icient, minor tree limb trimming will be performed instead of recommending a NPZ. Tree trimming is preferred within an area that is 18’ from the edge of the roadway on either side and 13’ above the centerline pavement.
• Bridges that have at least a 2’ shoulder and 11’ lanes we did not consider it for a no-passing zone.
• Minimum distance between NPZs: 400’
Desktop Review
A desktop review of the Parkway was conducted to identify the locations and lengths of the existing
No-Passing Zones. Google Earth, Google Maps, and other online resources were utilized to log and index all existing NPZ for each direction of travel. In addition, a justification for the presence of the
NPZ was identified, which dictates the standard to determine the appropriate length of NPZ for each direction. This information was tabulated in a spreadsheet and pinned as points of interest in
Google Earth. The existing NPZ were identified by having a pin for each transition point between passing zones, one way no passing zones, and double yellow no passing zones and placing a pin in the middle of the complete zone starting the southern end of the project. Once the pins were placed the stationing was taken to the nearest 10’ mark and placed in the table. It should be noted that the Natchez Trace Parkway centerline depicted in the plans was established solely for culvert locating/identification purposes and is not intended to replicate or propose a construction centerline for the Natchez Trace Parkway. Once the stationing was identified it was converted to the nearest mile marker to help give a better point of reference for each NPZ.
Field Review
Using the pins from Google Earth, a corridor-long drive-through was conducted with a dashcam to confirm the locations of all existing No-Passing Zones and to help identify potential areas that need further review. Additionally, each intersection and pull-o� area was reviewed and photographed to record the sight lines from both directions and note any trees or other obstructions that inhibit sight lines. AASHTO was used to determine the sight distance necessary to safely pass. Under the 50-mph posted speed limit along the corridor, an 800’ sight distance is required. Any location that does not meet that standard requires a NPZ.
A drive through with the client was conducted to identify any questionable areas that may have solutions other than simply adding a NPZ. The client advised that minor trimming is possible and a clear zone box 18’ from the edge of the road and 13’ from the surface of the roadway should be cleared and maintained by maintenance. The client also advised the design team to be conservative with the implementation of NPZ while ensuring the corridor is up to current standards.
Final Review
During the Desktop Review and the Field Review, several locations were noted as potentially having limited sight distance limited by vertical curves. These were noted based on existing NPZs or by visual inspection. The locations noted were then analyzed using a GIS based vertical profile of the road. This method provided a quick way to determine if the locations were limited by elevation changes in the roadway. Many locations could quickly be removed from consideration as the sight distance was shown to meet the criteria. However, this method, while quick is not as accurate as other methods of measuring the profile elevations of the roadway. For locations where a few inches could make the di�erence between meeting criteria for NPZ and not, a LiDAR survey of the project was used to further verify the profile elevation of the roadway. LiDAR is highly accurate, but due to the large amount of data it contains is more cumbersome to use on a long project like this.
Therefore, LiDAR was used only on the locations where inches matter.
Once the Desktop Review, Field Review, and the vertical elevations review were complete, a final review of the NPZ locations was conducted, considering all of the information collected, to develop final recommendations.
Results
After thorough analysis, a table was created to identify the existing and recommended NPZs. The table is shown in Appendix. The table illustrates the existing extents of the NPZs for each direction of tra�ic as well as the locations of the recommended NPZs. The table is organized by ID assigned to each existing NPZ during the Desktop Review. Additional IDs added during the Final Review begin with an “x-“ and are numbered according to the existing locations they are near. Each zone is identified based on the centerline station and cross referenced to the approximate mile marker post, to locate and identify passing/no passing areas of interest along the Natchez Trace Parkway
There are 41 existing zones and 15 is recommended to be removed. Additionally, there are 3 new zones to be recommended and 2 existing zones that are being extended. Additionally, 8 locations were reviewed due to tree overgrowth impacting sight lines. These 8 locations can be solved without the need of a no-passing zone with tree and limb trimming along the length of the corridor to create a clear zone box 18’ from the edge of travel way and 13’ from the surface of the roadway to ensure clear sight lines throughout the corridor.
Rayner T:\_Standards\BLOCKS\PE Seals\VA-TRR Model (1)
Appendix
ID-38
Baseline 3.5' above baseline 800' sight distance line
ID-37
ID- 36
ID-35
ID-34
ID-26
ID-24
ID-x-20 (North)
ID- x-20 (South)
ID-18
ID 15 and 16
ID 13 and 14
11-12ID-11 and 12
ID-9
ID-8
| 2026-10-22T14:02:47-0400 | |
| Timothy R Rayner |
File details come from the government source that posted it. Updated .