6923G526Q0087 QA.xlsx
XLSX spreadsheet 10 KB Posted
- Attached to
- AtoN Buoy Chains Federal contract opportunity
- Solicitation number
- 6923G526Q0087
About this file
This is a Questions and Answers document for Solicitation 6923G526Q0087, a Request for Quote (RFQ) issued by the Department of Transportation Saint Lawrence Seaway Development Corporation for AtoN Buoy Chains. The document addresses eight key inquiries from prospective vendors regarding compliance, documentation, and delivery requirements. Critical clarifications include: chains do not require TAA compliance if shipped overseas but must comply with FAR 52.225-1 and 52.225-2 (Buy American Act); vendors must submit a completed FAR 52.225-2 Buy American Certificate with their initial quotation; mill certification is required for each lot of chain rather than individual 90-foot shots; 1-1/8-inch chain shots should consist entirely of common links without enlarged end links; the receiving warehouse will provide forklift support with one week advance notice for delivery coordination; the Nonmanufacturer Rule (FAR 52.219-33) does not apply to this requirement; and chains manufactured in China do not meet the end customer's acceptance criteria, reinforcing Buy American compliance requirements.
This 100% Total Small Business Set Aside (NAICS 332111 - Iron and Steel Forging, 750-employee threshold) requires quote submission by September 1, 2026, at 2:00 PM EST to chora.snyder@dot.gov, with a questions deadline of August 25, 2026. Delivery must be completed within 45 days of award to GLS Receiving Warehouse in Massena, New York. The RFQ resulted from Amendment A00001, which incorporated these questions and answers into the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 6923G526Q0087 A000001.pdf | ||
| Attachment A_SOW_RV1.pdf | ||
| RFQ 6923G526Q0087.pdf | ||
| Attachment C_AtoN Chain Tech Spec.pdf | ||
| Attachment B_Pricing Sheet.xlsx | XLSX spreadsheet | |
| Attachment A_SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 6923G526Q0087 - Buoy Chains Questions & Answers
| # | Question | Answer |
| 1 | Do chains need to be TAA compliant if shipped from overseas? | No. Quoters shall comply with the requirements of FAR 52.225-1 and FAR 52.225-2 |
| 2 | Please confirm that Attachment A_SOW_RV1 is the controlling SOW and that the deleted earlier version of Attachment A should not be used for any purpose. | Correct. |
| 3 | FAR 52.225-1 and 52.225-2 are included. Please confirm that all offered buoy chain must qualify as a domestic end product under the Buy American Act and identify whether any particular domestic-content documentation must accompany the initial quotation. | Vendors must complete and submit FAR 52.225-2, Buy American Certificate, with their initial quotation to declare the origin of the product. |
| 4 | For the required mill certification, must the contractor provide chemical and mechanical material test results, heat/lot traceability, proof-load test results, and breaking-load certification for each individual 90-foot shot? | The awarded vendor shall provide mill certification for lot of chain. |
| 5 | The technical table notes that enlarged end links are currently provided only on 1/2-inch chain and that other end-link dimensions are shown for reference. Please confirm that each 1-1/8-inch shot should consist of common links throughout, without enlarged end links. | Confirm that each 1-1/8" shot should consist of common links throughout without end links. |
| 6 | The total chain weight is approximately 11,400 pounds before packaging. Will the receiving warehouse provide a loading dock and forklift for unloading, or must delivered pricing include liftgate, crane, or other unloading service? | A forklift will be provided. The vendor must coordinate delivery arrangement at least one (1) week in advance to ensure availability. |
| 7 | Please confirm whether FAR 52.219-33, Nonmanufacturer Rule, was intentionally omitted and whether a small-business nonmanufacturer may qualify by supplying chain manufactured in the United States by a qualifying small-business manufacturer. | FAR 52.219-33 does not apply to this requirement. |
| 8 | Could you please confirm whether the end customer will accept chains manufactured in China? | Quoters shall comply with the requirements of FAR 52.225-1 and FAR 52.225-2 |
File details come from the government source that posted it. Updated .