684382326PA01 DRAWING.pdf
PDF 188 KB Posted
- Attached to
- TEST WEIGHT
- Solicitation number
- SPMYM223Q0342
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM223Q0342 AMENDMENT.pdf | ||
| SPMYM223Q0342.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LIFTING AND HANDLING
C/412
360-315-1660
REV:
CHECK BY: S.BIRANG /S/
TEST WEIGHT
- SHEET 1 OF 3
DRAWN BY: M.MURRAY /S/
SIZE: A DATE: 11-15-2022
±1/16
±1 DEG
±0.03 ±0.005
BREAK ALL SHARP EDGES
MACHINED SURFACE FINISH
.XXX
.XX
ANGLES
FRACTIONS
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
SYMBOLS & TOL IN ACCORDANCE WITH ASME Y14.5
REMOVE ALL WELD SPATTER
+.005 -.001HOLE O :
GENERAL NOTES:
1. WEIGHT SHALL BE PREPPED TO SSPC-SP 10 AND PAINTED
WITH A SYSTEM RECOMMENDED BY THE OEM FOR A 2B
ENVIRONMENTAL ZONE PER SSPC WITH A 10+ YEAR LIFE
EXPECTANCY. COLOR SHALL BE WHITE.
2. LOAD TEST EACH PADEYE TO 2000 LBS +5/-0% AND
HOLD FOR TWO MINUTES.
3. TOTAL WEIGHT SHALL BE BETWEEN 2030 TO 2050 LBS.
4. THICKNESS OF PIECE (2) MAY BE ADJUSTED TO ENSURE
CORRECT WEIGHT IS REACHED, HOWEVER THE SIZE OF THE
CHAMFER MUST BE MAINTAINED.
5. LABEL WEIGHT WITH ACTUAL MEASURED WEIGHT ON TWO
OPPOSING SIDES AND TOP OF WEIGHT.
BOM
ITEM # DESCRIPTION QTY MATERIAL
SPEC OR P/N
1 20.5 X 20.5, 1" THICK
PLATE 30 ASTM A-36
2 20.5 X 20.5, 1" THICK
PLATE 1 ASTM A-36
3 PADEYES 2 ASTM A-36
Controlled by: Trident Refit Facility, Bangor Controlled by: Code 412 CUI Category: CTI Distribution Statement D: Distribution authorized to DoD and DoD contractors only;
Administrative / Operational use; 14 November 2022. Other U.S. request shall be referred to COMNAVSEASYSCOM (SEA00P).
POC: Michael Murray, 360-315-1660
360-315-1660
REV:
CHECK BY: S.BIRANG /S/
TEST WEIGHT
- SHEET 2 OF 3
DRAWN BY: M.MURRAY /S/
SIZE: A DATE: 11-15-2022
B
B SECTION B-B
12 1/2
5/16
5/16 TYP
TYP3/8
NOTE:
1. WELDING AND INSPECTION TO BE DONE IN
ACCORDANCE WITH AWS D1.1. VISUALLY
INSPECT FINAL WELDS.
2. WELDS SHALL NOT ENCROACH ON 11.375"
HOLE DIM. WELD CHAMFER MAY BE
INCREASED TO ALLOW FULL WELD THROAT.
CUI
360-315-1660
REV:
CHECK BY: S.BIRANG /S/
TEST WEIGHT
- SHEET 3 OF 3
DRAWN BY: M.MURRAY /S/
SIZE: A DATE: 11-15-2022
O 20 1/2O 20 1/2
A A
SECTION A-A
11.38
.625 X 45°
O 11.375
5/8
3.75
R 1.25
3.50
1.00
O 1.12
2.50
CUI
File details come from the government source that posted it. Updated .