6432 Specs Flatbed Dump.pdf

Finished truck platform shall be a flatbed steel tread plate deck with a roll over 2 5/16” ball with rings for safety chains in the center of the deck. Stake pockets around sides and rear for stake sides to install later. Steel Headboard with punched window hole attach to the platform with lights. Electric/hydraulic hoist to make platform a dump bed, with tie downs to hold platform when hoist is not in use. Rear bumper with 2” receiver hitch, rings for safety chains and a seven way electrical outlet. Mud flaps, wood stringers, U bolts, paint and all programming for lights and bed install. Under bed box installed on driver side and a spare tire carrier installed under bed on passenger side.

Provided by Forest Service: 2022 Chevrolet K5500 Cab and Chassis Diesel Dual Rear Wheel

60” cab to axel 141” wheelbase

Provide Quote to provide and install:

STEEL PLATFORM

Heavy duty 9'4" x 96" Platform, recessed clearance lamps flush with rub rail, full depth 10 ga. tapered rear apron, 2" x 4" 10 gauge external type stake pockets 24" centers, 3/8" x 2" tie down bumper bar.

Cab to axle-----------60" dual rear wheel

Floor -----------------12 gauge tread plate steel floor

Cross sills------------5" 10 gauge formed

Length-----------------9'4"

Width------------------96"

Powder coated paint / 90% gloss black finish

Weight-------------approx 1000#s

Tapered Headboard for Standard duty platforms 42"X96"

Full width punched hole window, Lights and gussets included with

Headboard, Powder coated black

ELECTRIC OVER HYDRAULIC HOIST

Hoist, with a sub-frame, NTEA Class 20, 5" cylinder bore, 16" stroke, 2" rod size, hoist weight 550#s, body prop, powder coated black, operating pressure is

3200PSI, designed for 8' - 12' bodies. Furnish and install tie downs RH and LH side to fasten body to the frame when using in bed ball.

Installation Kit for 8' - 12' Platforms including mud flaps, Wood Stringers, U bolts and paint / Under coat Wood Stringers.

1/2" Buck plate Hitch for Ford Cab Chassis.

15,000lb. MGTW. With 2" Receiver Tube.

7 Way flat light receptacle (REAR)

Furnish and install B&W Turnover ball hitch for platforms, and (2) rings for safety chains. 30,000lb trailer weight, 7,500lb tongue weight.

18"X18"X30" Underbody Steel tool box , 14-gauge steel box, 12-gauge steel recessed /beveled door, rain channel, 1/2" door gasket (automotive style), Stainless continuous hinge, stainless T handle latch. Powder coated black. MOUNT DRIVER SIDE FRONT

Furnish fab and install an underbody spare tire cage (carrier), using steel strap and painted black.

PASSENGER SIDE FRONT