6198-7900 - QQ-N-286 - NICKEL COPPER ALUMINUM - ORDERING DATA.pdf
PDF 100 KB Posted
- Attached to
- METAL BAR
- Solicitation number
- SPMYM226Q7972
About this file
This is a Material Ordering Data sheet for nickel-copper-aluminum alloy wrought material (UNS N05500) per specification QQ-N-286G dated December 7, 2000. The contracting information includes IDN N4523A 6198-7900, ICN 88MSM00001, with KO and KOI both set to 000. The material must be supplied in Form 2, annealed and age hardened condition with a hot finished surface. The required size is 6 inches in diameter, provided in two 10-foot lengths.
Quality and testing requirements are comprehensive and mandatory. Suppliers must perform product check analysis, ultrasonic inspection, liquid penetration testing, and slow strain rate tensile testing in accordance with section 4.3.6 of the specification. The slow strain rate tensile test must be conducted by one of the laboratories listed in the solicitation. Mechanical testing is required per section 4.3.2 for rod and bar intended for reforming. All packaging, packing, and marking must comply with MIL-STD-129, with reference to DLA Procurement Note C20 for detailed container marking instructions. The specification requires use of the latest revision of QQ-N-286G and all referenced DODISS documents at time of award. This Material Ordering Data sheet was prepared by the Material and Technical Support Branch, Code 244.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation SPMYM226Q7972.pdf | ||
| 6198-7900 CDRL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
QQ-N-286
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6198-7900
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. TITLE: NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) QQ-N-286G, dated 07
DECEMBER 2000
B. Form: 2 Condition: ANNEALED & AGE HARDENED. Surface finish: HOT FINISHED
C. Current issue of DODISS and individual documents referenced is to be cited.
D. Forging sketch required: N/A
E. Size required: 6” DIA.
F. Product check analysis required: Yes.
G. When hardness measurements may be utilized for forged rings and discs: N/A
H. When tolerances other than those specified are permitted: N/A
I. Ultrasonic inspection is required.
J. Liquid penetration is test required.
K. The lengths required and whether cut-to-length, random mill lengths, nominal (stock) lengths, or multiples of specified lengths: TWO - 10 FOOT LENGTHS
L. If multiples of a specified length are ordered, whether a ¼ inch allowance should be made for each cut:
N/A
M. If edges are other than specified: N/A
N. Forging dimensions: N/A
O. If marking should be other than specified: PER THIS SPECIFICATION IN ADDITION TO CONTRACT
REQUIREMENTS.
P. When mechanical test are required for rod and bar intended for reforming: PER SECTION 4.3.2
Q. If mechanical testing is to be done on material ordered in the unaged condition, to demonstrate its capability of being aged to meet the required mechanical properties, and, if desired, the heat treating procedure to be used on the test specimens: N/A
R. The final heat treatment procedure to be used on the lot before being placed into service and on the slow strain rate tensile test specimens: PER SECTION 4.3.6
S. Slow strain rate tensile test is required. Slow strain rate tensile test shall be performed by one of the laboratories listed in the solicitation.
T. Packaging, packing, and marking requirements: PER MIL-STD-129
Additional Data Requirements:
Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G, dated 7 Dec. 2000.
MATERIAL ORDERING DATA
QQ-N-286
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129 Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Branch
Code: 244.4
File details come from the government source that posted it. Updated .