61225136- ORDERING DATA.pdf

This document is an Ordering Specifications sheet for industrial emergency stop (E-stop) buttons. The specifications outline the technical requirements for ordering E-stop devices with the following key parameters:

The mounting diameter must accommodate standard industrial cutouts of either 22mm or 30mm. The actuator type must feature a mushroom head with a standard large round button approximately 40mm in diameter, and the action mechanism must be push-to-lock (latching) to comply with ISO 13850 safety standards. For the reset method, vendors may provide either a twist-to-release option (where the button is turned to reset) or a pull-to-release option (where the mushroom head is pulled outward to reset). Additionally, since the buyer requested a "Button Only" configuration, the specifications clarify that the vendor should confirm whether normally closed (NC) contact blocks are needed, as most safety circuits require at least one or two NC blocks to ensure the machine stops if a wire breaks.