60AMW-SOW.pdf

Salient Characteristics for Museum Artifact Exhibit & Conservation Supplies Unless specified elsewhere, all items must be delivered no later than 120 days after contract is awarded.

01 – Freestanding Gallery Information Stand must meet the following requirements:

• Be constructed of stainless steel

• Measure 44 inches in height

• Have a circular base measuring 13 inches

• Must be silver in color; cannot be black, powder coated, or any other color

• Must be able to accommodate portrait or landscape oriented signage plates and reader rails

• Have angled adapter compatible with Signage Plates and Reader Rails

• Require 20 each

02 – Signage Plate, Small must meet the following requirements:

• Be constructed of extruded aluminum

• Have a clear acrylic cover slide to one side to insert information placard

• Acrylic must be low-reflective that complies with current ADA standards

• Must be silver in color; cannot be black, powder coated, or any other color

• Must be able to mount in portrait or landscape orientation

• Measure 8 1/2” by 11”

• Must be compatible with Freestanding Gallery Information Stand

• Require 5 each

03 – Signage Plate, Large must meet the following requirements:

• Have a clear acrylic cover slide to one side to insert information placard

• Acrylic must be low-reflective that complies with current ADA standards

• Must be silver in color; cannot be black, powder coated, or any other color

• Must be able to mount in portrait or landscape orientation

• Measure 11” by 17”

04 – Reader Rail, Small must meet the following requirements:

• Have a clear acrylic cover slide to one side to insert information placard

• Acrylic must be low-reflective that complies with current ADA standards

• Must be silver in color; cannot be black, powder coated, or any other color

• Must be able to mount in portrait or landscape orientation

• Measure 11” by 48”

• Require 10 each

05 – Reader Rail, Large must meet the following requirements:

• Have a clear acrylic cover slide to one side to insert information placard

• Acrylic must be low-reflective that complies with current ADA standards

• Must be silver in color; cannot be black, powder coated, or any other color

• Must be able to mount in portrait or landscape orientation

• Measure 11 inches by 72 inches

• Require 6 each

06 – Conservation form - Male, must meet the following requirements:

• Be constructed of Ethafoam

• Have internal anodized aluminum pole structure and joints

• Must have a posable waist

• Must accommodate the following sizes:

• Height - 5’ 6” to 6’ 0”

• Neck - 15 1/2”

• Shoulders - 18” to 21” (adjustable)

• Chest - 33”

• Arm Length - 24” (adjustable)

• Sleeve Length - 33” (from center back - adjustable)

• Waist - 30 1/4”

• Hips - 32 1/2”

• Inseam - 26” to 35” (adjustable)

• Thigh - 18 1/2”

• Knee - 14 1/2”

• Calf - 13 1/2”

• Lower Calf- 10”

• Exterior must have a polyester stockinette white covering

• Must have jointed arms with hands, fingers can be connected

• Must have a Conservation Head with facial features

• Must come equipped with a powder coated steel square tube coming out of the calf allowing for footwear to be displayed without cutting, damaging, or altering the footwear. This tubing must fit on a compatible heel plate

• Must be compatible with Waist Bracket and heel plates

• Require 15 each

07 – Conservation form - Female, must meet the following requirements:

• Be constructed of Ethafoam

• Have internal anodized aluminum pole structure and joints

• Must have a posable waist

• Must accommodate the following sizes:

• Height - 5’ 4” to 5’ 10”

• Neck - 13”

• Shoulders - 17 1/2” to 21” (adjustable)

• Chest - 30 1/2”

• Arm Length - 23” (adjustable)

• Sleeve Length - 30” (from center back - adjustable)

• Waist - 25 1/2”

• Hips - 32 1/2”

• Inseam - 26” to 35” (adjustable)

• Exterior must have a polyester stockinette white covering

• Must have jointed arms with hands, fingers can be connected

• Must have a Conservation Head with facial features

• Must come equipped with a powder coated steel square tube coming out of the calf allowing for footwear to be displayed without cutting, damaging, or altering the footwear. This tubing must fit on a compatible 8” vertical spike heel plate

• Must be compatible with Waist Bracket and heel plates

08 – Waist Bracket, for conservation forms must meet the following requirements:

• Be constructed of powder coated adjustable steel post

• Be designed to fit over a vertical 8” spike heel plate

• Must be compatible with heel plate and conservation forms

09 – Heel Plate, Large, must meet the following requirements:

• Be constructed of black powder coated steel

• Base plate must be 1’ by 1’ by 3/16” thick, with a 1⁄2” square 8” long steel post welded to the surface

• A 5/16” hole is drilled in each corner of the plate

• Must be compatible with Waist Bracket and conservation forms

10 – Heel Plate, Small, must meet the following requirements:

• Be constructed of black powder coated steel

• Base plate must be 5 1/2” by 2 1/2” by 3/16” thick, with a 1⁄2” square 8” long steel post welded to the surface

• A 5/16” hole is drilled in each corner of the plate

• Must be compatible with conservation forms

11 – Dusting Brush must meet the following requirements:

• Handle must be 14” to 16” long

• Bristles must be soft, sterilized 100% horsehair, wax-set in handle

• Brown color preferred

12 – Artifact Storage box style 1 must meet the following requirements:

• Two piece design, bottom and lid

• B-Flute corrugated material that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.5

• Must pass P.A.T. test

• No drop-front

• Interior size of 30” by 42” by 7 1/4”

• Blue color

• Require 30 each

13 – Artifact Storage box style 2 must meet the following requirements:

• B-Flute corrugated material that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.5

• Must pass P.A.T. test

• No drop-front

• Interior size of 24” by 36” by 8”

14 – Artifact Storage box style 3 must meet the following requirements:

• B-Flute corrugated material that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.5

• Must pass P.A.T. test

• No drop-front

• Interior size of 21 7/8” by 59 7/8” by 6”

15 – Artifact Storage box style 4 must meet the following requirements:

• B-Flute corrugated material that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.5

• Must pass P.A.T. test

• No drop-front

• Bottom of box must be of slant-sided design

• Interior size of 7” by 10.8755” by 5.375”

16 – Artifact Storage box style 5 must meet the following requirements:

• B-Flute corrugated material that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.5

• Must pass P.A.T. test

• No drop-front

• Interior size of 12” by 15” by 10”

17 – Buffered tissue paper must meet the following requirements:

• Paper that is:

• Acid-free

• Lignin-free

• Buffered

• pH balance of 8.0 to 9.0

• 3% calcium carbonate buffer

• White, or soft-white in color

• Sheets 30” by 40”

• 100 sheets per pack

• Require 10 packs

18 – Digital environmental data logger must meet the following requirements:

• Must record and store temperature:

• Measurement range of -35°C to 80°C (-31°F to 176°F)

• Internal resolution 0.5°C (1.0°F)

• Accuracy (overall error) 0.55°C (1.04°F) typical (5 to 60°C)

• Long term stability <0.02°C (0.04°F) / year

• Capacity of 16,382 readings

• Must record and store relative humidity (RH):

• Measurement range of 0 to 100% RH

• Internal resolution 0.5%RH

• Accuracy (overall error) 2.25%RH typical (20 to 80%RH)

• Long term stability <0.25%RH / year

• Capacity of 16,382 readings

• Must record dew point; Accuracy (overall error) 1.7°C typical (-35 to 80°C, 40 to 100%RH)

• LCD display that shows high/low and last readings

• High contrast LCD, with two and a half digit temperature and humidity

• display function

• Logging rates between 10 seconds and 12 hours

• Immediate, delayed and push-to-start logging

• User-programmable alarm thresholds for both temperature and humidity

• Status indication via red/green LEDs

• Environmental protection to IP67

• Dimensions not to exceed: 4.96” by 0.98” by 0.86”

• Compatibility with

• A handheld programmer and data collector with USB port

• Computer USB port

• Free configuration software

• Powered by 3.6 volt AA batteries

• Color: Black

• Require 8 each

19 – Handheld programmer and data collector must meet the following requirements:

• Compatibility with digital environmental data logger

• Ability to:

• Configure digital environmental data logger

• Download data and view logs on the spot

• View data from up to 100 loggers on the collector

• Store data from a further 400 units on the unit

• Total data recording capacity of 8.5 million readings

• Touch screen interface for navigation of menus with options to:

• Set-Up Logger

• Start/Stop Logger

• Download and View Data

• Stored data can be transferred to a PC/Mac via micro USB cable

• Uploaded data must be saved in comma separated variable (csv) format

• Operating temperature range of 0 to +50°C (+32 to +122°F)

• Battery: Lithium Polymer, rechargeable via micro-USB connection

• Dimensions not to exceed: 4.2” by 2.7” by 0.7"

• 1x USB Type A socket (top of unit) for connection to data loggers

• 1x micro-USB (bottom of unit) for connection to PC

• Must come with USB A-Micro cable

• Color: Black

• Require 1 each