SPECIAL PACKAGING INSTRUCTION (SPI)

(DEVELOPED IN ACCORDANCE WITH MIL-STD-2073-1E)

NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER

NAVAL SURFACE WARFARE CENTER (NSWC)

INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD)

DETACHMENT PICATINNY

BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ, 07806-5000

http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/

TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER (NSN) - DODIC

1377-01-661-0137ES - JN63

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6.CAGE

040L3

7. NOMENCLATURE (ITEM DESCRIPTION)

CARTRIDGE, OPERATING, FIRE EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

9. QTY/UNIT PACK

ONE

10. UNIT PACK WEIGHT (LB)

N/A

11. UNIT PACK CUBE (CU FT)

N/A

12. UNIT PACK (BARRIER BAG) OUTSIDE DIMENSIONS (IN)

AS REQUIRED SEE BLOCK 23

13. METHOD OF PRESERVATION

PRESERVATION SHALL BE IN ACCORDANCE WITH (IAW) THIS SPI

14. ICQ

N/A

15. SPECIAL MARKING CODE

MARKINGS SHALL BE IAW THIS SPI

16a. LEVEL A PACKING N/A

16b. LEVEL B PACKING N/A

17a. LEVEL A PACKING CLOSURE N/A

17b. LEVEL B PACKING CLOSURE N/A

18. FIBERBOARD BOX WEIGHT (LBS)

N/A

19. FIBERBOARD BOX CUBE (CU FT)

2.34

20. FIBERBOARD BOX OUTSIDE DIMENSIONS (INCH)

15.00" X 15.00" X 18.00"

21. QUALIFICATION TEST REPORT - N/A

figure 1

FIGURE 1. FIBERBOARD SHIPPING BOX

22. REVISIONS/SIGNATURES/APPROVALS

BASIC

OR

REV

DESCRIPTION OF CHANGES

(NEEDED FOR REVISIONS

ONLY)

ED WALSEMAN,

NOSSA HAZARD CLASSIFICATION

CODE N85B

NSWC IHEODTD CAD/PAD SENIOR

ENGINEER

CODE E2

NAVAL PHST CTR, NSWC

IHEODTD, DET PICATINNY

CODE G1, ART STANTON (ACTING)

BASIC ------------------------------

DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

23. REMARKS

A. SAFETY PRECAUTIONS: EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1 FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

B. AS THE HANDLING SAFETY OF CARTRIDGES WHEN HANDLED OUTSIDE OF AN APPROVED AREA HAS NOT BEEN ESTABLISHED, THE PACKING OF CARTRIDGES SHOULD ONLY BE DONE IN AN APPROVED AREA WHERE THE ELECTRO-MAGNETIC EFFECTS (EME) LEVELS DO NOT EXCEED THE MAXIMUM ALLOWABLE ENVIRONMENTS ESTABLISHED FOR EXPOSURE OF HERO UNSAFE ORDNANCE.

C. THE BAR CODE SYMBOLOGY AND HUMAN READABLE INFORMATION (HRI) THAT ARE TO BE APPLIED SHALL BE IN ACCORDANCE

WITH MIL-STD-129.

D. ICQ - INTERMEDIATE CONTAINER QUANTITY.

E. NAVSEA SW020-AC-SAF-010. TRANSPORTATION AND STORAGE DATA FOR AMMUNITION, EXPLOSIVES AND RELATED HAZARDOUS

MATERIALS.

F. NAVSUP P-805 - AMMUNITION SENTENCING PUBLICATION.

G. MIL-STD-129 - MILITARY MARKING FOR SHIPMENT AND STORAGE.

H. 49 CFR - SUBPART E - LABELING 172.406: PLACEMENT OF LABELS.

I. MIL-STD-1168, MILITARY STANDARD: AMMUNITION LOT NUMBERING AND AMMUNITION DATA CARD.

J. UNIT PACK: THE FIRST TIE, WRAP, OR CONTAINER APPLIED TO A SINGLE ITEM, OR A QUANTITY THEREOF, OR TO A GROUP OF ITEMS OF A SINGLE STOCK NUMBER, PRESERVED OR UNPRESERVED, WHICH CONSTITUTES A COMPLETE OR IDENTIFIABLE PACKAGE. A UNIT PACK IS ALSO OFTEN REFERRED TO AS A ‘PACKAGE’ OR MERELY AS A “PACK”. HTTP://WWW.DLA.MIL/LANDANDMARITIME/

OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS/PACKAGING/DEFINITIONS.ASPX.

K. FABRICATE BARRIER BAG TO THE MAXIMUM SIZE TO ENSURE CAD IS FULLY ENCLOSED AND SEALED.

L. PERFORMANCE ORIENTED PACKAGING (POP) CERTIFICATION REQUIREMENT: IF CONTRACTUALLY REQUIRED, THE CONTRACTOR SHALL BE RESPONSIBLE FOR PERFORMANCE OF TESTING, AND SHALL ACQUIRE DATA NECESSARY TO SUPPORT COMPLIANCE WITH POP REQUIREMENTS OF HAZARDOUS MATERIALS AS DEFINED IN TITLE 49, CODE OF FEDERAL REGULATIONS (CFR), THE INTERNATIONAL MARITIME ORGANIZATION’S INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE, AND THE INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF DANGEROUS GOODS. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D4919, TESTING OF HAZARDOUS MATERIAL PACKAGING.

M. SEALING METHOD OF THE OUTER FIBERBOARD SHIPPING BOX SHALL FOLLOW THE SAME METHOD AS IDENTIFIED IN THE

CONTRACTOR’S POP TEST REPORT.

http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

24. BILL OF MATERIALS

ITEM

NO.

QTY

REQD

MATERIAL DESCRIPTION SIZE MATERIAL SPECIFICATION/PART NUMBER/NSN

1. 1 FIBERBOARD SHIPPING BOX (OUTER) 15.00" X 15.00" X 18.00" ASTM D5118, REGULAR SLOTTED BOX, WEATHER

RESISTANT, DWG 304078-11

2. AR PRESSURE-SENSITIVE TAPE FOR

PACKAGING, BOX CLOSURE AND SEALING

3.00" WIDE ASTM D5486/D5486M, TYPE I (WATERPROOF,

WEATHER-RESISTANT, POLYESTER BACKED), CLASS 2

(TRANSPARENT)

3. AR FLEXIBLE HEAT-SEALABLE

ELECTROSTATIC PROTECTIVE BARRIER

BAG

AS REQUIRED MIL-DTL-117, TYPE I, CLASS F, STYLE I

4. AR WEATHERPROOF LABEL 4.00" X 2.00" 7530-01-498-9208 OR EQUIVALENT

5. AR CAP, PROTECTIVE, DUST AND MOISTURE

SEAL

6971-0010 / 5340-01-613-0216

6. AR CARTON, FOLDING, PAPERBOARD (INNER) 2.56" X 1.88" X 3.50" .020 KRAFT LINED CHIP OR SUITABLE SUBSTITUTE /

KIDDE TECHNOLOGIES INC. DWG NO. 324646

7. AR TAMPER-EVIDENT SECURITY TAPE 1.00" WIDE HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-

16880R/CARTON-SEALING-TAPE/ULINE-HIDDEN-

MESSAGE-SECURITY-TAPE-1-X-55-YDS-

RED?MODEL=S-16880R&ROOTCHECKED=YES

ULINE P/N S-16880R OR EQUIVALENT SECURITY TAPE

8. AR INK, STENCIL A-A-00208 TYPE I OR III

9. 1 CARGO AIRCRAFT ONLY LABEL 4.00" X 4.00" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-14590/

ULINE P/N S-14590 OR EQUIVALENT

10. 1 HAZMAT LABEL FOR EXPLOSIVE CLASS

1.4C

4.00" X 4.00" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-5243/

D.O.T.-LABELS-AND-PLACARDS/DOT-LABELS-

EXPLOSIVE-1-4C-4-X-4 OR EQUIVALENT

11. AR PRESSURE-SENSITIVE ADHESIVE LABELS

FOR BAR CODING

(2DBC - TWO DIMENSIONAL BAR CODE)

MIL-PRF-61002B GRADE A, STYLE 2, COMPOSITION (B)

OR EQUIVALENT

12. AR MATERIAL CONDITION TAG OR LABEL:

• SERVICEABLE

• SUSPENDED

• TEST/MODIFICATION

• UNSERVICEABLE (REPAIRABLE)

• UNSERVICEABLE (CONDEMNED)

• DD FORM 1574-1 (TAG), (LABEL)

• DD FORM 1575 (TAG), DD FORM 1575-1 (LABEL)

• DD FORM 1576 (TAG), DD FORM 1576-1 (LABEL)

• DD FORM 1577-2 (TAG), DD FORM 1577-3 (LABEL)

• DD FORM 1577 (TAG), DD FORM 1577-1 (LABEL)

13. 1 ENVELOPE, ADHESIVE -BACKED, WATER

RESISTANT

8105-00-756-2710

14. AR TYPE II TRACEABLE SECURITY SEAL 2.00" X 9.00" HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-7590/

SECURITY-TAPE/U-SECURE-SECURITY-TAPE-STRIPS-

2-X-9-?KEYWORDS=S-7590

ULINE P/N S-7590 OR EQUIVALENT LABEL

15. AR COMPOUND, OBLITERATING, AEROSOL 8010-00-582-4743

https://www.uline.com/Product/Detail/S-14590/ https://www.uline.com/Product/Detail/S-5243/D.O.T.-Labels-and-Placards/DOT-Labels-Explosive-1-4C-4-x-4 https://www.uline.com/Product/Detail/S-5243/D.O.T.-Labels-and-Placards/DOT-Labels-Explosive-1-4C-4-x-4 https://www.uline.com/Product/Detail/S-16880R/Carton-Sealing-Tape/Uline-Hidden-Message-Security-Tape-1-x-55-yds-Red?model=S-16880R&RootChecked=yes https://www.uline.com/Product/Detail/S-7590/Security-Tape/U-Secure-Security-Tape-Strips-2-x-9-?keywords=s-7590

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS

BEEN OBTAINED.

THE SAFETY PRECAUTION REQUIREMENTS OF THE “CONTRACTORS” SAFETY MANUAL FOR AMMUNITION, EXPLOSIVES AND RELATED DANGEROUS MATERIAL, DOD 4145.26M ARE APPLICABLE. NOTE: WHEN THIS SPECIFICATION IS USED AS A PART OF THE DESCRIPTION OF WORK TO BE ACCOMPLISHED BY A GOVERNMENT ACTIVITY, THE SAFETY PRECAUTIONS REQUIRED BY NAVSEA OP 5 “AMMUNITION AND EXPLOSIVES SAFETY

ASHORE,” ARE APPLICABLE.

NOTE

FIBERBOARD SHIPPING BOX MUST BE A UN PERFORMANCE-

ORIENTED PACKAGING (POP) TESTED BOX. BOXES NOT UN POP

TESTED ARE NOT AUTHORIZED FOR USE IN ACCORDANCE WITH THIS

INSTRUCTION. UN POP TESTED BOXES WILL HAVE A UN POP

MARKING PRINTED ON BOX EXTERIOR.

1. OBTAIN A OUTER FIBERBOARD SHIPPING BOX, ITEM 1. IF REQUIRED, CONSTRUCT FIBERBOARD SHIPPING BOX FOR PACKING, USING PRESSURE SENSITIVE TAPE, ITEM 2, AS SHOWN IN FIGURE 1. DO NOT APPLY PRESSURE SENSITIVE TAPE TO TOP FLAPS AT THIS POINT. PLACE EMPTY FIBERBOARD SHIPPING BOX OUT OF THE WAY.

WARNING

HEAT SEALING PROCEDURES SHALL BE IN ACCORDANCE WITH

FACILITY SAFETY PROCEDURES.

2. OBTAIN OR FABRICATE THE APPLICABLE SIZE BARRIER BAG USING BARRIER MATERIAL, ITEM 3.

3. USING A LABEL MAKER PRINTER OR EQUIVALENT DEVICE, PRINT THE FOLLOWING INFORMATION ON

LABEL, ITEM 4.

figure 2

FIGURE 2. BARRIER BAG MARKINGS

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY”

SHALL NOT BE INCLUDED AS PART OF THE IDENTIFICATION

MARKINGS. MARKING LOCATIONS ON CONTAINER SHALL BE IAW

MIL-STD-129.

NOTE

THE LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND THE LARGEST SIZE PRACTICAL FOR

THE PACKAGE SIZE WITHIN THE ACCEPTABLE RANGE. WHEN

MARKING SPACE PERMITS, STENCILED OR PRE-PRINTED MARKINGS

SHALL BE NOT LESS THAN 3/32 OF AN INCH.

A. THE NATIONAL STOCK NUMBER: 1377-01-661-0137ES AND DODIC: JN63 ON SAME LINE.

NOTE

THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION. THE

ITEM DESCRIPTIONS MAY BE MARKED ON MORE THAN ONE LINE IF

REQUIRED DUE TO SPACE LIMITATIONS.

B. QUANTITY-ITEM DESCRIPTION: 1 - CARTRIDGE, OPERATING, FIRE EXTINGUISHER, CCU-173/A.

C. PART NUMBER - 475031 / 3315AS465

D. SERIAL NUMBER - (INSERT SERIAL NO, IF ASSIGNED) - THE WORD “SER” SHALL PRECEDE THE SERIAL NUMBER.

NOTE

LOT NUMBER SHALL BE IN ACCORDANCE WITH MIL-STD-1168.

E. THE APPLICABLE LOT NUMBER (INSERT LOT NO.) - THE WORD “LOT” SHALL PRECEDE THE LOT NUMBER. THE

LOT NUMBER SHALL BE UNDERLINED WITH A SOLID LINE APPROXIMATELY 1/8 INCH THICK.

4. APPLY THE LABEL TO THE EXTERIOR OF THE APPLICABLE BARRIER BAG AS SHOWN IN FIGURE 2.

figure 3

FIGURE 3. CARTRIDGE, OPERATING, FIRE EXTINGUISHER, CCU-173/A, JN63

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

5. THE CARTRIDGE ACTUATED DEVICE (CAD), FIGURE 3, SHALL BE FREE OF DAMAGED OR MISSING

COMPONENTS. A CAD THAT FAILS TO MEET THESE REQUIREMENTS SHALL BE REJECTED.

figure 4

FIGURE 4. CAD INSERTED INTO BARRIER BAG

6. INSTALL PROTECTIVE CAP, ITEM 5, ON CAD AS SHOWN IN FIGURE 3.

7. PLACE ONE (1) CAD INTO THE APPLICABLE BARRIER BAG AS SHOWN IN FIGURE 4.

WARNING

HEAT SEALING PROCEDURES SHALL BE IN ACCORDANCE WITH

FACILITY SAFETY PROCEDURES.

NOTE

MANUALLY MANIPULATE THE BARRIER BAG TO REMOVE ALL AIR

FROM INSIDE THE BAG.

8. REMOVE AIR FROM BARRIER BAG, SO THAT IT CONFORMS SNUGLY AROUND THE CAD, AND

HERMETICALLY SEAL THE BARRIER BAG.

9. OBTAIN INNER PAPERBOARD CARTON, ITEM 6, AND ASSEMBLE AS REQUIRED. USING A LABEL MAKER PRINTER OR EQUIVALENT DEVICE, FABRICATE A LABEL USING, ITEM 4, WITH THE FOLLOWING INFORMATION PRINTED ON THE LABEL. THE LABEL SHALL BE APPLIED TO THE EXTERIOR OF CARTON.

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY”

SHALL NOT BE INCLUDED AS PART OF THE IDENTIFICATION

MARKINGS. MARKING LOCATIONS ON CONTAINER SHALL BE IAW

MIL-STD-129.

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

THE LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF

EQUAL HEIGHT, CLEARLY VISIBLE, AND THE LARGEST SIZE

PRACTICAL FOR THE PACKAGE SIZE WITHIN THE ACCEPTABLE

RANGE. WHEN MARKING SPACE PERMITS, STENCILED OR PRE-

PRINTED MARKINGS SHALL BE NOT LESS THAN 3/32 OF AN INCH.

A. THE NATIONAL STOCK NUMBER: 1377-01-661-0137ES AND DODIC: JN63 ON SAME LINE.

NOTE

THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION. THE

ITEM DESCRIPTIONS MAY BE MARKED ON MORE THAN ONE LINE IF

REQUIRED DUE TO SPACE LIMITATIONS.

B. QUANTITY-ITEM DESCRIPTION: 1 - CARTRIDGE, OPERATING, FIRE EXTINGUISHER, CCU-173/A.

C. PART NUMBER - 475031 / 3315AS465

D. SERIAL NUMBER - (INSERT SERIAL NO, IF ASSIGNED) - THE WORD “SER” SHALL PRECEDE THE SERIAL NUMBER.

NOTE

LOT NUMBER SHALL BE IN ACCORDANCE WITH MIL-STD-1168.

E. THE APPLICABLE LOT NUMBER (INSERT LOT NO.) - THE WORD “LOT” SHALL PRECEDE THE LOT NUMBER. THE

LOT NUMBER SHALL BE UNDERLINED WITH A SOLID LINE APPROXIMATELY 1/8 INCH THICK.

figure 5

FIGURE 5. BARRIER BAG INSERTED INTO PAPERBOARD CARTON

10. INSERT ONE (1) SEALED BARRIER BAG INTO THE PAPERBOARD CARTON, AS SHOWN IN FIGURE 5.

11. CLOSE THE PAPERBOARD CARTON FLAPS ENSURING THEY ARE SECURELY TUCKED.

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

TAMPER-EVIDENT SECURITY TAPE IS NOT REQUIRED FOR CONDITION

CODE “H” ITEMS ASSIGNED FOR DEMILITARIZATION.

12. APPLY TAMPER-EVIDENT SECURITY TAPE, ITEM 7, TO THE PAPERBOARD CARTON, ITEM 6, SO THAT IT MUST BE REMOVED, CUT OR DEFACED IN ORDER TO OPEN THE PAPERBOARD CARTON TO REMOVE THE CARTRIDGE

ACTUATED DEVICE (CAD).

13. REPEAT STEPS 2 THROUGH 12, UNTIL THE REMAINING CADS ARE PACKED IN PAPERBOARD CARTONS.

NOTE

UP TO 144 PAPERBOARD CARTONS CAN BE PLACED IN OUTER

FIBERBOARD SHIPPING BOX.

14. PLACE PAPERBOARD CARTONS IN OUTER FIBERBOARD SHIPPING BOX, ITEM 1, NOT TO EXCEED 144 TOTAL PAPERBOARD CARTONS. WHEN OUTER FIBERBOARD SHIPPING BOX CONTAINS LESS THAN 144 PAPERBOARD CARTONS, USE APPROPRIATE DUNNAGE MATERIAL TO RESTRICT MOVEMENT OF PAPERBOARD CARTONS.

15. CLOSE THE OUTER FIBERBOARD SHIPPING BOX TOP FLAPS AND SECURE USING PRESSURE SENSITIVE TAPE, ITEM 2, AS SHOWN IN FIGURE 1.

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY”

SHALL NOT BE INCLUDED AS PART OF THE IDENTIFICATION

MARKINGS. MARKING LOCATIONS ON CONTAINER SHALL BE IAW MIL-

STD-129.

16. USING STENCIL INK, ITEM 8, MARK/LABEL THE EXTERIOR OF THE SEALED FIBERBOARD SHIPPING BOX WITH

THE FOLLOWING INFORMATION, REFER TO FIGURE 6.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND LARGEST SIZE PRACTICAL FOR

PACKAGE SIZE WITHIN ACCEPTABLE RANGE. WHEN MARKING SPACE

PERMITS, STENCILED OR PRE-PRINTED MARKINGS SHALL NOT BE LESS

THAN 3/32 OF AN INCH.

NOTE

THE FOLLOWING MARKINGS MUST BE UNOBSCURED BY LABELS OR

ATTACHMENTS; AND MUST BE LOCATED AWAY FROM ANY OTHER

MARKING THAT COULD SUBSTANTIALLY REDUCE ITS EFFECTIVENESS.

A. NATIONAL STOCK NUMBER (NSN): 1377-01-661-0137ES, AND DOD IDENTIFICATION CODE (DODIC): JN63 SHALL

BE PLACED ON THE SAME LINE.

B. PART NUMBER: 475031 / 3315AS465

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION. THE ITEM

DESCRIPTIONS MAY BE MARKED ON MORE THAN ONE LINE IF REQUIRED

DUE TO SPACE LIMITATIONS.

C. QUANTITY/UNIT OF ISSUE - ENTER THE NUMBER OF CARTRIDGE, OPERATING, FIRE EXTINGUISHER, CCU-173/A PACKED. THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION (NOMENCLATURE) ON THE SAME LINE.

D. CONTRACT/PURCHASE ORDER NUMBER - (INSERT CONTRACT/PURCHASE ORDER NUMBER), IF APPLICABLE.

E. WEIGHT AND CUBE. THE CAPITAL LETTERS “WT” SHALL PRECEDE THE NUMERICAL GROSS WEIGHT IN POUNDS FOLLOWED WITH THE ABBREVIATION FOR POUNDS “LBS”. FRACTIONAL WEIGHTS SHALL BE ROUNDED UP TO THE NEXT WHOLE POUND. THE CAPITAL LETTERS “CU” SHALL PRECEDE THE NUMERICAL

CUBE IN FEET, ROUNDED TO NEXT WHOLE DIGIT.

F. SERIAL NUMBER - (INSERT SERIAL NO, IF ASSIGNED) - THE WORD “SER” SHALL PRECEDE THE SERIAL

NUMBER.

figure 6

FIGURE 6. MARKING, FIBERBOARD SHIPPING BOX

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

LOT NUMBER SHALL BE IAW MIL-STD-1168. THE LOWER MOST MARKING

ON THE PACKAGE SIDE CONTAINING THE ITEM NOMENCLATURE SHALL

BE THE AMMUNITION LOT NUMBER.

G. LOT NUMBER (SIDE OF CONTAINER). THE LOWER MOST MARKING ON THE PACKAGE SIDE CONTAINING THE ITEM NOMENCLATURE SHALL BE THE AMMUNITION LOT NUMBER. THE LOT NUMBER SHALL BE PRECEDED BY THE WORD “LOT” AND SHALL BE UNDERLINED WITH A SOLID LINE APPROXIMATELY 1/8 INCH THICK. IF A SERIAL NUMBER IS REQUIRED FOR THE ITEM(S) THE WORD “SER” AND THE SPECIFIC NUMBER(S) SHALL BE

MARKED ABOVE THE LOT NUMBER.

H. DODIC AND LOT NUMBER - BOTH ENDS OF OUTER CONTAINER SHALL BE MARKED WITH JN63 AND APPROPRIATE LOT NUMBER. THE LOT NUMBER ON OUTER CONTAINER ENDS SHALL NOT BE PRECEDED BY

THE WORD “LOT” OR UNDERLINED.

I. IF APPLICABLE, FOR AIR SHIPMENTS, NET EXPLOSIVE WEIGHT (N.E.W.).

J. CARGO AIRCRAFT ONLY LABEL, ITEM 9.

K. REUSABLE CONTAINER - DO NOT DESTROY.

L. DOT LABEL FOR EXPLOSIVES 1.4C, ITEM 10.

M. UNITED NATIONS (UN) PROPER SHIPPING NAME (PSN) AND UN IDENTIFICATION NUMBER - CARTRIDGES, POWER DEVICE - UN0276.

N. UN PERFORMANCE-ORIENTED PACKAGING (POP) CERTIFICATION MARKING.

O. MARK SPI NUMBER (SPI-PHST-347) ON CONTAINER (AIR FORCE USE ONLY).

17. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR PURCHASE ORDER, THE CONTAINER SHALL BE TAGGED USING A TWO-DIMENSIONAL BAR CODE (2DBC) LABEL, ITEM 11, IAW MIL-STD-129.

ACTIVITIES THAT DO NOT YET HAVE A 2DBC CAPABILITY BUT HAVE A LINEAR BAR CODE CAPABILITY SHALL CONTINUE TO USE LINEAR BAR CODE IN COMBINATION WITH MATERIAL CONDITION TAGS, ITEM 12.

ACTIVITIES THAT HAVE NO BAR CODE CAPABILITY SHALL CONTINUE TO USE MATERIAL CONDITION TAGS.

PLACE MATERIAL CONDITION TAG IN WATER RESISTANT ADHESIVE BACKED ENVELOPE, ITEM 13, AND

ATTACH TO THE FIBERBOARD SHIPPING BOX.

NOTE

TRACEABLE SEALS, TYPE 2 MAY BE PRE-PRINTED, STAMPED OR

MARKED WITH THE ACTIVITY SYMBOL OR IDENTIFIER. FOR

GOVERNMENT ACTIVITIES, PREPRINTING OF INDIVIDUAL INSPECTOR

INDICATORS IS NOT AUTHORIZED.

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-

NOTE

TRACEABLE TYPE 2 SEALS ARE THE PREFERRED SEALS FOR

FIBERBOARD SHIPPING BOX, THAT WILL NOT READILY ACCEPT TYPE

1 TRACEABLE (ANTIPILFERAGE) SEALS. TYPE 2 SEALS ARE,

TYPICALLY, NONMETALLIC LABELS WITH PRESSURE SENSITIVE

BACKING. ADHESIVES SHALL ADHERE WELL ENOUGH TO PREVENT

PEELING DURING SHIPPING CONDITIONS AND WELL ENOUGH TO

PREVENT LIFTING AND REPLACEMENT OF THE LABEL.

NOTE

NAVY AND MARINE CORPS ACTIVITIES: TYPE 2 TRACEABLE SEALS

APPLIED BY NAVY AND MARINE CORPS ACTIVITIES SHALL INCLUDE

THE ACTIVITY’S UNIT IDENTIFICATION CODE (UIC) AS WELL AS

APPLICATION OF AN INDIVIDUAL INSPECTION INDICATOR STAMP.

THE INSPECTOR INDICATOR STAMP SHALL BE A NUMERIC OR ALPHA-

NUMERIC IDENTIFIER TRACEABLE TO THE INDIVIDUAL ASSIGNED

THE INSPECTION INDICATOR STAMP. AN ACCEPTABLE ALTERNATE

METHOD OF CERTIFYING THE TRACEABLE SEAL IS TO APPLY, WITH A

PERMANENT MARKER, THE INSPECTORS PRINTED NAME, SIGNATURE,

AND ACTIVITY UIC, IF THE UIC IS NOT PREPRINTED.

NOTE

SIZE THE TRACEABLE SEALS SO THAT THE MARKINGS AND LABELS

ARE NOT OBSCURED.

figure 7

FIGURE 7. EXAMPLE OF TYPE 2 SEAL

18. USING, ITEM 14, FABRICATE TYPE 2 SEALS, SEE EXAMPLE IN FIGURE 7. THE SEALS SHALL BE APPLIED TO THE OUTER FIBERBOARD SHIPPING BOX, ITEM 1, SO THAT THEY MUST BE REMOVED, CUT OR DEFACED IN ORDER

TO OPEN THE FIBERBOARD SHIPPING BOX TO REMOVE THE INNER PAPERBOARD CARTONS.

5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-347

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

UNPACKING INSTRUCTIONS

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS

BEEN OBTAINED.

THE SAFETY PRECAUTION REQUIREMENTS OF THE “CONTRACTORS” SAFETY MANUAL FOR AMMUNITION, EXPLOSIVES AND RELATED DANGEROUS MATERIAL, DOD 4145.26M ARE APPLICABLE. NOTE: WHEN THIS SPECIFICATION IS USED AS A PART OF THE DESCRIPTION OF WORK TO BE ACCOMPLISHED BY A GOVERNMENT ACTIVITY, THE SAFETY PRECAUTIONS REQUIRED BY NAVSEA OP 5 “AMMUNITION AND EXPLOSIVES SAFETY ASHORE,”

ARE APPLICABLE.

1. TRANSPORT LOADED FIBERBOARD SHIPPING BOX, ITEM 1, TO UNPACKING AREA.

2. INSPECT TRACEABLE (ANTIPILFERAGE) SEALS FOR EVIDENCE OF POSSIBLE FIBERBOARD SHIPPING

BOX INTRUSION. IF SEALS ARE CUT, MISSING, OR DAMAGED, NOTIFY SUPERVISOR.

NOTE

EXERCISE CARE WHEN OPENING FIBERBOARD SHIPPING BOX.

FIBERBOARD SHIPPING BOX CAN BE REUSED PROVIDED IT REMAINS

SERVICEABLE.

3. CAREFULLY SLIT TRACEABLE (ANTIPILFERAGE) SEALS. EXERCISE CARE NOT TO DEFACE SEALS.

4. CAREFULLY SLIT TAPE AND OPEN FIBERBOARD SHIPPING BOX.

5. REMOVE ONE (1) PAPERBOARD CARTON, ITEM 6, FROM FIBERBOARD SHIPPING BOX.

6. INSPECT TAMPER-EVIDENT SECURITY TAPE FOR EVIDENCE OF POSSIBLE PAPERBOARD CARTON

INTRUSION. IF TAPE IS CUT, MISSING, OR DAMAGED, NOTIFY SUPERVISOR.

NOTE

EXERCISE CARE WHEN OPENING THE PAPERBOARD CARTON.

PAPERBOARD CARTON CAN BE REUSED PROVIDED IT REMAINS

SERVICEABLE.

7. CAREFULLY SLIT TAMPER-EVIDENT SECURITY TAPE AND OPEN PAPERBOARD CARTON, ITEM 6.

8. CAREFULLY REMOVE BARRIER BAG.

9. CAREFULLY OPEN THE BARRIER BAG AND REMOVE THE CARTRIDGE.

10. MOVE CARTRIDGE TO DESIGNATED PROCESSING AREA.

11. DISPOSE OF UNSERVICEABLE MATERIALS IAW LOCAL DISPOSAL INSTRUCTIONS.

12. CONTINUE REMOVING PAPERBOARD CARTONS, ITEM 6, FROM FIBERBOARD SHIPPING BOX. UNPACK PAPERBOARD

CARTONS UNTIL ALL PAPERBOARD CARTONS HAVE BEEN EMPTIED.

SPI-PHST-347

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

1377-01-661-0137ES

5. CAGE NO. - PART/DRAWING NUMBER

475031 / 3315AS465

6. CAGE

040L3

7. NOMENCLATURE

CARTRIDGE, OPERATING, FIRE

EXTINGUISHER, CCU-173/A

8. UNIT OF ISSUE

EACH

UNPACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806- 5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil

WARNING

READ THE SAFETY DATA SHEET (SDS) FOR COMPOUND,

OBLITERATING, AEROSOL USED. THE PRECAUTIONS, PROCEDURES

AND SPECIAL PROTECTION INFORMATION CONCERNING THE

COMPOUND SHALL BE FOLLOWED.

NOTE

EXERCISE CARE NOT TO OBLITERATE FIBERBOARD SHIPPING BOX UN

PERFORMANCE-ORIENTED PACKAGING (POP) MARKING.

13. DO NOT OBLITERATE FIBERBOARD SHIPPING BOX, ITEM 1, UN POP MARKING. ONCE FIBERBOARD SHIPPING BOX IS EMPTY, USING COMPOUND, OBLITERATING, AEROSOL, ITEM 15, REMOVE ALL PRE-EXISTING MARKINGS THAT INDICATE THAT CADS ARE PACKED INSIDE THE FIBERBOARD SHIPPING BOX AND PAPERBOARD BOXES. DISPOSE OF UNSERVICEABLE FIBERBOARD SHIPPING BOX AND PAPERBOARD BOXES

IAW LOCAL INSTRUCTIONS.

14. IF SERVICEABLE, RETAIN FIBERBOARD SHIPPING BOX AND PAPERBOARD BOXES FOR FUTURE USE. STENCIL “REUSABLE CONTAINER, DO NOT DESTROY” ON TOP OF FIBERBOARD SHIPPING BOX, AS SHOWN IN FIGURE 6.

(REMAINDER OF PAGE INTENTIONALLY LEFT BLANK)

mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-347