About this file

This is an award notice for a firm fixed price contract to provide washer and dryer lease and maintenance services in support of naval personnel at Naval Submarine Base Kings Bay in Georgia. The contractor will lease and maintain 73 washing machines and 132 dryers across four buildings on the base. The base period of performance is from June 15, 2023 through June 14, 2024 with optional one-year extensions available through June 2026. The contractor must maintain at least 95% of washers and dryers in working order at all times. The contractor will be responsible for repairs, maintenance, replacement parts, and exchanging unserviceable machines. The award is valued at $159,097.68 with funding provided under a specified line item number and cost code.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUM

(No Collect Calls)b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.915-843-2011

N688369. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

N6883623P0130 15-Jun-2023

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N4223723RC007PK

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

Joel H. Dimaapi / Supervisory Contract Specialis

See Schedule USD159,097.68

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE 5N3G1 FACILITY

OFFEROR CODE

NAVSUP FLC JACKSONVILLE CONTRACTS DIV

KIMBERLEY SANDERS

110 YORKTOWN AVE 3RD FLOOR

JACKSONVILLE FL 32212

ESPARZA, INC.

ESPARZA INC

GILBERT ESPARZA

2525 MONTANA AVE

EL PASO TX 79903-3709

DFAS CLEVELAND

NORFOLK ACCOUNTS PAYABLE

1240 E 9TH STREET

CLEVELAND OH 44199-8022

18a. PAYMENT WILL BE MADE BY CODE N68732

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE

SEE ITEM 9

15. DELIVER TO CODE N42237 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFP

NAVAL SUBMARINE BASE KINGS BAY

JOSHUA ANGLEHART

UNACCOMPANIED HOUSING BLDG 1043

KINGS BAY GA 31547

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$47,000,000

NAICS:

532210

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL: joel.dimaapi@navy.mil

TEL:

31c. DATE SIGNED

15-Jun-2023

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF43

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 USD0.00

LEASE MAINTENANCE OF WASHERS AND DRYERS

FFP

Base Period 15 June 2023 through 14 June 2024 Services to be performed in accordance with the Performance Work Statement

MILSTRIP: N4223723RC007PK

PURCHASE REQUEST NUMBER: N4223723RC007PK

ADDITIONAL MARKINGS: Joshua Anglehart 912-573-1179

NET AMT USD0.00

0001AA 12 Months USD5,527.58 USD66,330.96

LEASE MAINTENANCE OF WASHING MACHINES

FFP

Lease and Maintenance of 73 washing machines in accordance of the PWS FOB: Destination

MILSTRIP: N4223723RC007PK

PURCHASE REQUEST NUMBER: N4223723RC007PK

PSC CD: W072

NET AMT USD66,330.96

ACRN AA

CIN: N4223723RC007PK0001

$66,330.96

0001AB 12 Months USD7,730.56 USD92,766.72

LEASE MAINTENANCE OF DRYERS

FFP

Lease and Maintenance of 66 (132 stacked) dryers in accordance of the PWS FOB: Destination

MILSTRIP: N4223723RC007PK

PURCHASE REQUEST NUMBER: N4223723RC007PK

NET AMT USD92,766.72

ACRN AA

CIN: N4223723RC007PK0001

$92,766.72

1001 USD0.00

OPTION LEASE MAINTENANCE OF WASHERS AND DRYERS

FFP

Option Period 1 15 June 2024 through 14 June 2025 Services to be performed in accordance with the Performance Work Statement

1001AA 12 Months USD603.98 USD7,247.76

OPTION LEASE MAINTENANCE OF WASHING MACHINES

FFP

Lease and Maintenance of 73 washing machines in accordance of the PWS FOB: Destination

NET AMT USD7,247.76

1001AB 12 Months USD844.70 USD10,136.40

OPTION LEASE MAINTENANCE OF DRYERS

FFP

Lease and Maintenance of 66 (132 stacked) dryers in accordance of the PWS FOB: Destination

NET AMT USD10,136.40

2001 USD0.00

OPTION LEASE MAINTENANCE OF WASHERS AND DRYERS

FFP

Option Period 2 15 June 2025 through 14 June 2026 Services to be performed in accordance with the Performance Work Statement

2001AA 12 Months USD816.26 USD9,795.12

OPTION LEASE MAINTENANCE OF WASHING MACHINES

FFP

Lease and Maintenance of 73 washing machines in accordance of the PWS FOB: Destination

NET AMT USD9,795.12

2001AB 12 Months USD1,141.57 USD13,698.84

OPTION LEASE MAINTENANCE OF DRYERS

FFP

Lease and Maintenance of 66 (132 stacked) dryers in accordance of the PWS FOB: Destination

NET AMT USD13,698.84

3001 USD0.00

OPTION LEASE MAINTENANCE OF WASHERS AND DRYERS

FFP

IAW FAR 52.217-8 Up to Six (6) Months Services to be performed in accordance with the Performance Work Statement

3001AA 6 Months USD748.03 USD4,488.18

OPTION LEASE MAINTENANCE OF WASHING MACHINES

FFP

Lease and Maintenance of 73 washing machines in accordance of the PWS FOB: Destination

NET AMT USD4,488.18

3001AB 6 Months USD1,046.16 USD6,276.96

OPTION LEASE MAINTENANCE OF DRYERS

FFP

Lease and Maintenance of 66 (132 stacked) dryers in accordance of the PWS FOB: Destination

NET AMT USD6,276.96

PWS

Performance Work Statement (PWS) For

Washer and Dryer Lease and Maintenance Service Naval Submarine Base – Kings Bay, Georgia

N6883623P0130

1.0 Introduction

1.1 Description of Services

1.2 Background

1.3 Objectives

1.4 Period of Performance

1.5 General Information

1.5.1 Quality Control

1.5.2 Quality Control Plan

1.5.3 Phase In Period

1.5.4 Phase Out Period

1.5.5 Hours Of Operation (Business Hours)

1.5.6 Beyond Economical Repair (BER)

1.5.7 License and Certification

2.0 Requirements

2.1 General

2.1.1 Scope of Work

2.2 Equipment Specifications

2.3 Washer Requirements

2.3.1 Washer Specifications

2.4 Dryer Requirements

2.4.1 Dryer Specifications

2.7 Places of Performance

2.7.1 Washers

2.7.2 Dryers

3.0 Scope/Taskings

3.1 Maintenance

3.2 Job Site Cleanup

3.3 Signs and Decals

3.3.1 Company Markings

3.3.2 Operating Instructions

3.3.3 Out-Of-Order Signs

3.4 Repairs

3.4.1 Repair Contact

3.4.2 Response

3.4.3 Replacement

3.4.4 Authorization

4.0 Administration

4.1 Contractor’s Representative

4.2 Property Damage

4.3 Property Liability

5.0 Government Furnished Items and Services

5.1.1 Utilities

5.1.2 Facilities

5.2 Contractor’s Representative

6.0 Deliverables

7.0 Security

8.0 Government Quality Assurance Surveillance Plan (QASP)

PERFORMANCE WORK STATEMENT (PWS)

1.0 INTRODUCTION

1.1 Description of Services:

This PWS is developed to support Commander, Navy Region Southeast (CNRSE) to provide Washer and Dryer Lease and Maintenance Services in support of naval personnel at Naval Submarine Base, Kings Bay (NSB KB), Georgia.

1.2 Background:

CNRSE manages and oversees shore installation management support and execution for 18 installations.

Installation locations are within the Southeastern United States, including Alabama, Arkansas, Florida, Georgia, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, South Carolina, Tennessee, Texas, and Guantanamo Bay, Cuba. NSB KB, Georgia provides support to the fleet, fighter and family by maintaining and operating the facilities of the Trident submarine force stationed here. In support of naval personnel, the provision of washers and dryers in the housing facilities are required in conjunction with the maintenance of the appliances.

1.3 Objectives

To provide Washer and Dryer Leased Units and maintenance of those units in support of naval personnel with flexible, efficient and cost-effective contracted service support. To have all leased washers and dryers onboard NSB KB fully functional and operational by diligently performing maintenance and repairs in an effort to avoid any equipment downtime precluding Navy personnel from using these units to meet their schedule.

1.4 Period of Performance:

See SF1449 Schedule.

1.5 General Information

1.5.1 Quality Control:

Quality Control is the responsibility of the contractor. The Contractor is responsible for the delivery of quality services/supplies to the Government (see FAR 52.246-4, Inspection of Services – Fixed-Price). The contractor shall submit their Quality Control Plan (QCP) in accordance with solicitation instructions. This plan will be approved and incorporated into the PWS upon contract award.

1.5.2 Quality Control Plan:

The Contractor shall develop, implement and maintain an effective Quality Control System which includes a written QCP. The QCP shall implement standardized procedure/methodology for monitoring and documenting contract performance to ensure all contract requirements are met. The contractor’s QCP must contain a systematic approach to monitor operations to ensure acceptable services/products are provided to the Government. The QCP, as a minimum, shall address the contractor’s proposed maintenance schedule.

1.5.3 Phase-In Period

Fifteen (15) calendar-days after contract award will begin the phase-in period to install, connect, troubleshoot, and make fully operational all contractor-owned washers and dryers installed in selected facilities. During the Phase-In period, the Contractor will conspicuously hang professional instructional signs (see para 3.3 Signs and Decals) in each laundry room and other areas where machines will be located highlighting operational procedures for machine use. After washers and dryers have been installed, the Contractor will furnish to the Contracting Officer’s Representative (COR), a list of machines identifying the make, model number, serial number, and machine nomenclature. When machines are added, removed, or relocated from one location to another location, an updated list will capture any adjustments and be provided to the COR.

1.5.4 Phase-Out Period

Contractor shall be given a seven (7) calendar-day phase-out period to disconnect and remove lines and equipment contractor-owned. This includes but is not limited to: washers, dryers, vent connections, gas line connections, all water supply lines, electrical, and drain connections from government utilities. The Contractor will provide to the COR a written timeline schedule 45 days prior to end of performance, identifying what days appliances will be removed from each facility. All surface areas where the machines were placed will be free of trash and debris prior to departure. Should the incumbent Contractor be awarded the subsequent follow-on contract to lease washers and dryers to the Government, removal of old units will be required prior the start date of the new contract.

1.5.5 Hours Of Operation (Business Hours)

7:30AM to 3:30PM (East Coast Time/Local Kings Bay, GA Time) Monday through Friday Excluding Federal Holidays listed below:

New Year’s Day 1st day of January Martin Luther King Jr.'s Birthday 3rd Monday of January Presidents Day 3rd Monday of February Memorial Day Last Monday of May Juneteenth 19th day of June Independence Day 4th day of July Labor Day 1st Monday of September Columbus Day 2nd Monday of October Veterans Day 11th day of November Thanksgiving Day 4th Thursday of November Christmas Day 25th day of December

1.5.6 Beyond Economical Repair (BER)

BER refers to the state wherein the estimated repair cost of a washer or dryer exceeds more than 75% of its replacement value. When an appliance repair is determined to be BER, the contractor shall notify the COR of their determination.

1.5.7 License and Certification

The Contractor shall provide copies of License and Certification of technicians proposed to support the contract.

2.0 Requirements

This section describes the general requirements for this effort.

2.1 General

This is a non-personal services contract to provide Washer and Dryer Lease and Maintenance Services for NSB KB, Georgia . The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn, is responsible to the Government.

2.1.1 Scope of Work

The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items to perform all operations for washer and dryer lease and maintenance services. The Contractor shall perform the requirements in this PWS, conform to the professional standards identified in this contract, and shall follow all applicable instructions and directives as identified by this PWS.

2.2 Equipment Specifications

2.2.1 The Contractor shall provide new commercial (not previously used or repaired) washers and stacked dryers, connection hoses and fittings for each building, for the water supply, drains, electrical connection and ventilation to connect to the Government owned utility service connection points.

2.2.2 All equipment shall be installed in accordance with (IAW) the National Electrical Code (NEC), National Mechanical Code and other applicable codes.

2.2.3 The Contractor is responsible for coordinating (with the COR) and conducting at least one site visit prior to the delivery of the washers and dryers to ensure the intended laundry room spaces can properly accommodate the installation and operation of the leased units.

2.2.4 The Contractor shall provide the results of the successful testing to the COR prior to the use of any washer or dryer. In the event a washer or dryer fails operational testing, the Contractor shall advise the COR of its remedial plan.

2.3 Washer Requirements.

Contractor shall furnish, deliver and install new commercial top loading washing machines (clothes), non-coin operated, commercial washers on a leased basis. All required maintenance, repairs, replacement of parts and materials and exchange of machines shall be accomplished IAW the terms and conditions of this contract.

Contractor shall furnish all parts, labor, material, transportation, and equipment necessary to install, maintain, repair, and relocate contractor-owned washers to include associated hot and cold washer hoses and drain hoses as often as necessary to ensure proper operation of appliances and to prevent damage to building structure or injuries to personnel. The required locations and quantities are at section 2.8 of this PWS.

2.3.1 Washer Specifications.

Table 1 Washer Specifications

(a) Commercial, multi-housing electric (120 Volt, 60-hertz) single-phase power supply, fully automatic clothes washers with a minimum capacity of 16 pounds.

(b) Washers shall have a cylinder volume of 3.19 cubic feet, spin speed G-force (RPM) of 150 (710).

(c) Units shall have a water consumption per cycle of 27.9 gal, modified energy factor of 8.8 gal/ft3, and water pressure of 20-120 psi.

(d) Washer dimensions should be no more than 25.625” width, 28.0” depth, and 43.0” height.

Table 1 Washer Specifications NOTE ON SECTION (d):

Due to the space limitations of the laundry rooms these washer units will be installed, the models provided by the contractor shall not exceed the dimensions listed in this paragraph.

(e) The washers shall be capable of washing, rinsing, spin-drying, and shutting off automatically when the door is opened during the spin cycle.

(f) Each washer shall be equipped with a safety-interlocking device that will shut the machine off when the door is opened during the spin cycle (No Lid Lock).

(g) Washers shall have a temperature selector and be connected to both a hot and cold water source.

(h) Washers shall be able to use Non-High Efficiency laundry detergent.

(i) Washers shall NOT have automatic slide coin boxes.

(j) Electrical cords shall have an attachment plug and minimum free length of five feet measuring from the point of entry into the cabinet to the washer.

(k) Washers shall be top loading machines only.

(l) All electrical wiring for the set-up and installation of these washer units shall be in accordance with existing local, state, and federal laws, rules and regulations including but not limited to NEC.

(m) All washers shall be white in color.

2.4 Dryer Requirements.

Contractor shall furnish, deliver, and install new (not previously used or repaired) front-load electric non-coin operated, commercial dryers on a lease basis. All required maintenance, repairs, replacement of parts and materials or exchange of machines shall be accomplished IAW the terms and conditions of this contract. Contractor shall furnish all plant, labor, material, transportation, and equipment necessary to install, maintain, repair, and relocate contract-owned dryers. The Contractor shall provide and maintain (dryers) semi- rigid aluminum dryer exhaust house.

2.4.1 Dryer Specifications.

Table 2 Dryer Specifications

(a) Electric (3 wire nominal 120/240 volts, 60 cycle A.C.)

(b) All electrical wiring for the set-up and installation of these dryer units shall be in accordance with existing local, state, and federal laws, rules and regulations including but not limited to NEC.

(c) Stacked dryers’ maximum height shall be 79” (or less) due to the space limitations of the laundry rooms.

(d) UL Solutions (Underwriters Laboratories; https://www.ul.com/) approved.

(c) Commercial motor and cabinet construction,

(e) 5.75 cubic foot drum capacity minimum

(f) Minimum three (3) selections for drying temperature. Standard dryer settings to include settings for permanent press fabrics, delicate, and heavy duty.

(g) Minimum of 60 minutes of timed drying

(h) Dryers shall NOT have automatic slide coin boxes.

(i) All dryers shall be white in color.

2.5 Services shall be performed in accordance with the PWS listed herein as well as specific procedures described in the manufacturer’s repair-maintenance-operating manuals, industry standards, and all applicable federal laws and regulations. If in case a conflict arises between these references, the contractor shall refer the matter to the COR for resolution.

2.6 For each building location, Fully functional and operational is defined as having a minimum of 95% (grand total) of all leased washers and 95% (grand total) of all leased dryers (across all sites) working, in good order and operating within manufacturer specifications at any given time within the POP. See Section 12 of PWS herein.

2.7 PLACES OF PERFORMANCE

Table 3 Places of Performance

Building 1041 (First Floor, Room Number C11) 970 USS James Madison Rd.

Kings Bay, GA 31547 Building 1053 (First Floor, Room Number 115) 1040 USS Main Ave.

Kings Bay, GA 31547 Building 1068 (First Floor, Room Number 137) 1061 USS Tennessee Ave.

Kings Bay, GA 31547 Building 1070 (First Floor, Room Number 118) 980 USS Tennessee Ave.

Kings Bay, GA 31547

2.7.1 WASHERS

Table 4 Washers

Building Quantity

1041 11

1053 28

1068 6

1070 28

Total 73

2.7.2 DRYERS (Stacked)

Table 5 Dryers

Building Quantity

1041 22 (11 stacked)

1053 50 (25 stacked)

1068 6 (3 stacked)

1070 54 (27 stacked)

Total 132 Dryers = (66 Stacked Dryers)

3.0 SCOPE/TASKINGS

3.1 Maintenance

The Contractor shall perform all necessary maintenance and repair to keep equipment in proper working order in accordance with sound commercial practice. The Contractor shall obtain a report of machine failure or special servicing requirements from the COR. The Contractor shall maintain a service call/job order record form of all equipment breakdown, reflecting machine number, location and time breakdown is discovered or reported, nature of failure and time and date of repair. Upon completion of work, the Contractor shall give a copy of the form to the COR.

Table 6 Maintenance (minimum requirements)

(a) All maintenance is conducted at a minimum within the manufacturer’s suggested guidelines/ commercial practices.

(b) Service calls are within operational hours

(c) The Contractor shall service all strainers or screens on each machine on a regular basis as necessary to maintain safety and as required for proper operation of the equipment.

(d) The Contractor shall clean and wipe down each machine (including the rim under the lid of the washing machine) to ensure machines are free of dirt, grime, and build-up, clean the immediate area and remove all debris or trash each time a machine is serviced.

(e) The Contractor shall receive work orders via e-mail, text or telephone.

3.2 Job Site Cleanup.

Contractor will clean up all lint, dust, and debris particles from the interior and exterior of building laundry rooms after servicing vent systems. Contractor shall remove all debris and waste materials from the work site leaving the work area in a clean and orderly condition at each facility upon completion of work. All debris generated as a result of this contract may be disposed of in Government-furnished dumpsters located near the facility being serviced.

3.3 Signs and Decals

The Contractor shall provide initially a maximum of 20 signs with operating instructions to be spread out amongst all the buildings. The COR will provide the locations in each buildings laundry room after award. The Contractor shall replace signs that become illegible. The Contractor shall also post a sign in each laundry room reading, “To report any operating issues with the equipment, call the Front Desk at Phone # TBD at time of award of contract”.

The signs shall be professionally made and use of handmade or improvised signs is prohibited.

3.3.1 Company Markings

Contractor shall mark and maintain the following information on both sides of all Contractor-owned/Contractor-operated vehicles. Magnetic signs are acceptable on Contractor’s vehicles. Markings shall be legible and shall he conspicuously shown on vehicles doors.

Contractor’s Name Contractor’s Address (Local) Contractor’s Telephone Number Vehicle Identification Number (Contractor Assigned) Contractor’s Logo (If Applicable)

3.3.2 Operating Instructions.

Contractor shall provide and post operational instruction signs for washers and dryers in all areas where appliances will be located. At a minimum, signs shall provide manufacturers’ operating instructions for proper use of machines (i.e. type and amount of detergent, machine functions, locking mechanism on frontload washer doors, cycling when machines are in use, over filling machine dispensers, sitting on, or moving machines etc. Each sign shall provide information cautioning users to remove items for clothing, pockets, and other washable garments prior to washing and drying cloths or other apparel.

3.3.3 Out-Of-Order Signs.

Contractor will securely attach to inoperable dryers, an “Out of Order” sign that posts the technician's name, the date the machine became inoperable, and an expected date of repair based on when materials, parts, or replacement of a machine is expected.

3.4 Repairs

3.4.1 Repair Contact

The Contractor shall provide names, phone numbers, and/or electronic mail address of each person responsible for servicing machines.

3.4.2 Response

Upon notification from the COR, either by email, work order, or telephonic means, the Contractor shall initiate repair of a washer and/or dryer unit within three working days. Upon arrival to a building where a machine is inoperable, Contractor will immediately contact the COR advising them of the nature of the visit.

3.4.3 Replacement

The Contractor shall replace a washer or dryer within five working days after the unit has been determined to be unserviceable. If not immediately available, the contractor shall show receipt of backorder repair parts and supplies and shall replace unserviceable items within five days after receipt of back-order item.

3.4.4 Authorization

The contractor shall not initiate any repair it deems outside the scope of Section 3.0 without written prior approval and authorization from the KO.

If the need for additional work is identified that the Contractor determines is outside the scope of Section 3.0, the Contractor is required to provide the following to the COR: a written statement as to why it is outside the scope of Section 3.1 and a written estimate of the cost (labor & materials) of the additional work (repair work discovered during periodic maintenance). The quote shall include the following as a minimum: Nature of the Repair, Parts & Materials, Estimated Number of Hours, Unit Price, Extended Price, and Total Cost. The COR shall evaluate and make a determination on the repair course of action (COA) to the KO. The contractor will be informed to proceed with commencement of the job order or informed of other alternative measures.

4.0 ADMINISTRATION

4.1 CONTRACTOR’S REPRESENTATIVE

The Contractor shall designate in writing to the Contracting Officer a representative who will be in charge of the work during normal working hours. The Contractor’s representative shall be empowered with sufficient authority to enable him to meet conditions which arise in the operation of the contract without undue delay.

4.1.1 IDENTIFICATION

The Contractor shall provide a distinctive nameplate, emblem, insignia, or other approved method of identification for each of his employees. This mark of identification shall be attached to an item of wearing apparel and shall be worn at all times while performing work under this contract so as to distinguish the Contractor’s workers from Government employees. The Contractor shall also furnish suitable identification for all of his property, by marking or tagging to distinguish from Government-owned property.

4.1.2 The Contactor is responsible for coordinating base access (adhering to installation security requirements) with the COR for delivery and subsequent maintenance and repair of the leased units aboard NSB KB.

4.2 Property Damage:

Contractor personnel shall be accountable for damages to Government property, such as disfigurement of furniture, building structures, and grounds damage caused by Contractor’s vehicles. The Contractor shall be responsible for all damages to persons or property that occurred as a result of his/her fault or negligence in connection with the performance of the required work. Surfaces, fixtures, or any other furnishings damaged by Contractor’s personnel shall be repaired or replaced by the Contractor to the satisfaction of the KO at no cost to the Government.

4.3 Property Liability.

Contractor shall be fully responsible and directly liable for incidental property damage, personal injuries and or death to personnel as a direct result of faulty installed equipment either installed replaced, repaired or removed by the Contractor. Contractor shall hold the government harmless from any or all claims arising from such cause.

5.0 Government Furnished Items and Services

5.1.1 Utilities.

The Government will provide all utilities associated with paragraph 5.1.2 for the Contractor’s use in performance of tasks outlined in this PWS. The Contractor (to include subcontractors) shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating under conditions that preclude the waste of utilities.

5.1.2 Facilities:

The Government will provide the necessary location for the washers and dryers see Section 2.8 Table 3 of this PWS.

5.1.3 No other supplies, equipment, or services will be provided by the Government in support of this contract.

5.2 CONTRACTOR’S REPRESENTATIVE

The Contractor shall designate in writing to the Contracting Officer as representative who will be in charge of the work during normal working hours. The Contractor’s representative shall be empowered with sufficient authority to enable him to meet conditions which arise in the operation of the contract without undue delay.

5.2.1 CONTRACTING OFFICER’S REPRESENTATIVE (COR) PRIMARY

Name: TBD Tel: TBD E-mail: TBD

5.2.2 CONTRACTING OFFICER’S REPRESENTATIVE (COR) ALTERNATE

Name: TBD Tel: TBD E-mail: TBD

6.0 DELIVERABLES

6.1.1 The Contractor shall maintain an electronic service call/job order record or log of all equipment issues requiring maintenance, repair or replacement to be submitted to the COR on a monthly basis. The electronic log shall include but not be limited to the following information:

(a) Machine Serial Number

(b) Location (Bldg Number and Room Number)

(c) Time Issue was Discovered or Reported

(d) Nature of Issue

(e) Time and Date of Repair or Resolution

(f) Upon completion of work, the Contractor shall give a copy of the maintenance/repair/replacement report to the COR (Primary or Alternate).

6.1.2 The COR shall determine the type, format, content and transmission medium of the report as well as the submission date (i.e. last date of the month, etc.).

7.0 SECURITY

7.1 All contractor equipment, personnel and vehicles are subject to inspection and search by US Government security officials (or designated representatives) upon entry to any government owned and/or operated installations and facilities. Discovery of prohibited items may result in Contractor personnel being banned from entering the installation either temporarily or permanently.

7.2 Contractor personnel shall comply with all local base/installation security procedures required to gain access to U.S. Government contract-related facilities and Department of the Navy (DoN) assets (as necessary). Increased vetting may be required in order to gain access to certain sensitive or restricted areas of DoN facilities through the use of T1 or T3 background investigations.

7.3 If directed by US government officials (or designated representatives), the contractor shall remove (and replace as necessary) contractor-personnel and/or its representatives determined to be a security risk at no additional cost to the government.

7.4 The contractor shall coordinate and comply with “all security requirements” regarding each personnel assigned to this project through the COR or designated representative within 10 business days of the contract release (or effective date, whichever comes first).

7.5 Contractor personnel shall comply with Federal and DoD Drug Free Workplace Programs. Federally prohibited drugs, and drug use, are not authorized on DoN facilities, and may result in Contractor personnel being banned from entering the installation either temporarily or permanently.

7.6 Contractor personnel will adhere to DoN Security training requirements as necessary and will comply with training and exercise instruction that may occur on the installation when the contractor personnel are present.

8.0 GOVERNMENT QUALITY ASSURANCE SURVEILLANCE PLAN (QASP)

8.1 The Government will use a Quality Assurance Surveillance Plan (QASP) during the life of the contract to ensure that the Contractor is in fact performing the services required by this contract in an acceptable manner. The QASP will be administered by the COR during the contract period of performance.

8.2 The COR will monitor and survey the Contractor's performance according to the terms of this PWS. The COR will report the Contractor's performance periodically under this PWS to the Contracting Officer (KO) according to the procedures, methods, and guidelines set forth in the QASP. The COR will continuously observe the Contractor performance under this PWS and record all observations of incomplete or defective performance and safety and health standards violations. The COR will issue the Contractor a Contractor Discrepancy Report (CDR) for incidents of unacceptable performance. The Contractor shall reply in writing within two business days after receipt of a CDR, explaining reasons for reported performance deficiencies and standards violations, the corrective action proposed, and procedures that will be implemented to prevent reoccurrence.

8.2.1. PERFORMANCE MEASUREMENT

Contractor Performance will be measured in accordance with the following table:

Performance

Element Performance Requirement Surveillance

Method Frequency Acceptable Quality

Level Leased Equipment Delivery

Ensure equipment meet the specifications IAW Sections 2.2, 2.3 & 2.4 of the PWS.

Inspection by COR At time of initial delivery and upon replacement of equipment.

100% Accuracy

Equipment Availability

Washers and Dryers are operational and ready for customer use IAW Sections 2.5 & 2.6 of the

PWS.

Inspection by the

COR

Weekly >95% of all leased washers and dryers at any given time within the PoP

Contractor Response Time

Contractor responds to work/repair requests IAW Sections 3.4 of the

PWS.

Inspection/review by the COR

Monthly >95% contractor performs within 3 business days of request

Contractor Quality Control Plan

QC activities, inspections, and corrective actions IAW Sections 1.5 of the PWS.

Inspection by the

COR

100% inspection of all contract deliverables.

>95% of deliverables submitted timely and without rework required

Repair/Replacement of Equipment

Equipment repaired/replaced IAW Sections 2.3, 2.4, 2.5, 3.1, 3.4, and 6.1.1 of the

PWS.

Reviewed by COR Monthly >95% of deliverables submitted timely and without rework required

Performance Element

Performance Requirement Surveillance Method

Frequency Acceptable Quality Level

Electronic Service Call/Job Order Record

Submit Records to COR on a Monthly Basis IAW Section 6.0 of the PWS.

Reviewed by COR Monthly 100% Accuracy

Overall Contract Performance

Overall contract performance of sufficient quality to earn a Satisfactory (or higher) rating in the

COR’s annual report on Contractor Performance.

Assessment by the

COR

Annual All performance elements rated Satisfactory (or higher)

Invoicing Monthly invoices per contract procedures are timely and accurate.

Review & acceptance of the invoice

Monthly 100% Accuracy

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A N/A 0001AA Destination Government Destination Government 0001AB Destination Government Destination Government 1001 N/A N/A N/A N/A 1001AA Destination Government Destination Government 1001AB Destination Government Destination Government 2001 N/A N/A N/A N/A 2001AA Destination Government Destination Government 2001AB Destination Government Destination Government 3001 N/A N/A N/A N/A 3001AA Destination Government Destination Government 3001AB Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 N/A N/A N/A N/A

0001AA POP 15-JUN-2023 TO

14-JUN-2024

N/A NAVAL SUBMARINE BASE KINGS BAY

JOSHUA ANGLEHART

UNACCOMPANIED HOUSING BLDG 1043

KINGS BAY GA 31547

912-537-1502 FOB: Destination

N42237

0001AB POP 15-JUN-2023 TO

14-JUN-2024

N/A (SAME AS PREVIOUS LOCATION)

1001 N/A N/A N/A N/A

1001AA POP 15-JUN-2024 TO

14-JUN-2025

N/A NAVAL SUBMARINE BASE KINGS BAY

JOSHUA ANGLEHART

UNACCOMPANIED HOUSING BLDG 1043

KINGS BAY GA 31547

912-537-1502

1001AB POP 15-JUN-2024 TO

14-JUN-2025

N/A (SAME AS PREVIOUS LOCATION)

2001 N/A N/A N/A N/A

2001AA POP 15-JUN-2025 TO

14-JUN-2026

N/A NAVAL SUBMARINE BASE KINGS BAY

JOSHUA ANGLEHART

UNACCOMPANIED HOUSING BLDG 1043

KINGS BAY GA 31547

912-537-1502

2001AB POP 15-JUN-2025 TO

14-JUN-2026

N/A (SAME AS PREVIOUS LOCATION)

3001 N/A N/A N/A N/A

3001AA N/A N/A N/A N/A

3001AB N/A N/A N/A N/A

ACCOUNTING AND APPROPRIATION DATA

AA: 1731804 52FA 232 00520 056521 2D QOPCGA

COST CODE: 23723RC007PK

AMOUNT: $159,097.68

ACRN CLIN/SLIN CIN AMOUNT

AA 0001AA N4223723RC007PK0001 $66,330.96

0001AB N4223723RC007PK0001 $92,766.72

CLAUSES INCORPORATED BY REFERENCE

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

JUN 2020

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

JAN 2017

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

DEC 2022

52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-28 Post-Award Small Business Program Rerepresentation MAR 2023 52.222-19 Child Labor -- Cooperation with Authorities and Remedies DEC 2022 52.232-18 Availability Of Funds APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.252-2 Clauses Incorporated By Reference FEB 1998 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Antiterrorism Awareness Training for Contractors JAN 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.211-7003 Item Unique Identification and Valuation JAN 2023 252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7001 Buy American And Balance Of Payments Program--Basic JAN 2023 252.225-7012 Preference For Certain Domestic Commodities APR 2022 252.225-7048 Export-Controlled Items JUN 2013 252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic

Enterprises, and Native Hawaiian Small Business Concerns

JAN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

____ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (13) [Reserved]

X (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (OCT 2022) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (OCT 2022) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (19) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT 2022) (15 U.S.C.

657f).

X (22) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (MAR 2023) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

X (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____ (28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (DEC 2022) (E.O. 13126).

X (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X (30)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

X (31)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

X (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

X (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

X (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

X (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

X (36) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(JUN 2016) (E.O. 13693).

____ (40)(i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O.

13513).

____ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (48) (i) 52.225-1, Buy American--Supplies (OCT 2022) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (49)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (DEC 2022) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I [Reserved].

____ (iii) Alternate II (DEC 2022) of 52.225-3.

____ (iv) Alternate III (JAN 2021) of 52.225-3.

____ (v) Alternate IV (OCT 2022) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (DEC 2022) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

____ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

____ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

X (58) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C.

3332).

____ (59) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

X (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

X (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

X (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .