53447990 _SOW_1.5 Inch ID Hose Assy.pdf
PDF 108 KB Posted
- Attached to
- Brand Name Intent - Hose Assembly (Assy)
- Solicitation number
- N4523A26Q4013
About this file
This is a Statement of Work (SOW) issued by Puget Sound Naval Shipyard & Intermediate Maintenance Facility for the fabrication and testing of 1-1/2 inch ID hose assemblies required to support government work.
The contractor must fabricate hose assemblies meeting all specifications detailed in the Ordering Data Sheets, including color, material type, dimensions, temperature ratings, and fitting specifications based on Saint Gobain Chemflour Hose (WTLCT) standards. Testing requirements include proof testing to 400 psi for 1 minute and hydrostatic testing to 225 psi for 30 minutes, with documentation of Test Inspection/Report Data provided for each hose length. Cleanliness requirements mandate visual examination of surfaces to ensure freedom from dirt, corrosion, oil, flux, grease, and foreign residue; mercury-containing compounds are prohibited. The contractor must maintain minimum bend radius specifications during packaging and prevent damage during handling and shipment by ensuring adequate support of hose and fittings, capping ends to prevent contamination, and packaging in a manner that protects against moisture exposure and shipping damage. The contractor shall deliver a Certificate of Compliance confirming that all design, performance, drawing, and test specifications have been met.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N4523A26Q4013_Ordering Data Sheet_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PUGET SOUND NAVAL SHIPYARD &
INTERMEDIATE MAINTENANCE FACILITY
Statement of Work
Hose Assemblies, 1-1/2 Inch ID
1 Scope. This Statement of Work (SOW) defines the effort required for the fabrication and testing of 1-1/2
INCH ID HOSE ASSEMBLIES.
1.1 Background. The 1-1/2 INCH ID HOSE ASSEMBLIES are required for support of government work.
2 Requirements
2.1 General Requirements. The 1-1/2 INCH ID HOSE ASSEMBLIES in the technical Ordering Data Sheets
(ODS) shall be manufactured in accordance with the color, material type, dimensions, temperature ratings, fitting specifications and performance criteria specified in the Ordering Data Sheets of this contract and testing requirements of paragraph 2.2.1.2 below.
2.2 Technical Objectives and Goals.
2.2.1 Design and Fabrication, and Test.
2.2.1.1 Design and Fabrication. The contractor shall fabricate 1-1/2 INCH ID HOSE ASSEMBLIES to meet all color, material type, dimensions, temperature ratings, fitting specifications and performance criteria of Saint Gobain
Chemflour Hose (WTLCT) as specified in the Ordering Data Sheets.
2.2.1.2 Tests. The tests may be conducted at the contractor's facilities or at an independent laboratory or commercial testing facility. The contractor shall conduct proof testing of 1-1/2 INCH ID HOSE ASSEMBLIES to
400 psi for 1 minute. The contractor shall conduct hydrostatic testing of 1-1/2 INCH ID HOSE ASSEMBLIES to
225 psi for 30 minutes. Verify no leakage, visible signs of weakness, or deformation and provide the government with the Test Inspection/Report Data for each length of hose procured under this contract.
2.2.1.3 Cleanliness Requirements. The contractor shall maintain cleanliness of hose assemblies per the following:
Parts shall be cleaned by any process or combination of processes which will accomplish thorough cleaning without damage to the part(s). Surfaces shall be examined visually to determine freedom from dirt, corrosion, oil, flux, grease or foreign residue. Preservatives shall not be used on part(s) which are vulnerable to damage by contact preservatives.
Mercury containing compounds shall not be intentionally added or come into direct contact with hose assemblies.
The inner tube surface area shall be visually examined to the maximum extent possible from each end.
2.2.2 Preparation for Delivery. The contractor shall package the hose assemblies per the following:
Transfer hoses must be carefully handled and protected to prevent damage. Hoses must not be sharply bent, kinked, twisted, stretched, dropped, scraped, or otherwise abused. Hoses and hose end fittings must be adequately supported during handling and rigging so that the weight does not bend the hose where it enters the end fittings.
Units to be shipped must be free of loose particles, dirt, grease, oil, etc. with ends capped to prevent dirt from entering. The hose assemblies shall be packaged per commercial standard in a manner that does not violate the minimum bend radius specified by the manufacturer. The hose assemblies shall be packaged in a manner that prevents the hose assemblies from being damaged during shipment and prevents the hose assemblies from being wet and exposed to the elements.
2.3 Certificate of Compliance (COC). The contractor shall provide a COC to confirm all design, performance, drawing and test specifications required by this contract have been met.
CONTENTS
Section/Paragraph
1 Scope
1.1 Background
2 Requirements
2.1 General Requirements
2.2 Technical Objectives and Goals
2.2.1 Design and Fabrication, and Test
2.2.1.1 Design and Fabrication
2.2.1.2 Test
2.2.2 Cleanliness Requirements
2.2.3 Preparation for Delivery
2.3 Certificate of Compliance(COC)
File details come from the government source that posted it. Updated .