5311-7924 ORDERING DATA.pdf
PDF 92 KB Posted
- Attached to
- HOSE ASSEMBLY
- Solicitation number
- SPMYM226Q5217
About this file
This Material Ordering Data document specifies technical requirements for a steam service hose assembly. The hose is a 1-inch internal diameter black EPDM synthetic rubber, wire-reinforced hose with a pin-pricked cover, featuring a stainless steel internal liner, and designed for saturated steam service at 250 PSIG. Each 25-foot hose assembly must include two 1-inch male NPT steel fittings from Dixon Valve & Coupling (MS11 Boss Male Stem) and Campbell Fittings IC-Series double U-bolt clamps.
The procurement calls for 130 hose assemblies, with strict packaging and marking requirements. Each hose must be marked with the manufacturer, model number, working pressure rating, and batch number. All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129, with additional instructions referenced in DLA Procurement Note C20. The hoses must pass a hydrostatic test at 290 (+5, -0) PSIG for 15 minutes with zero leakage or permanent deformation. The document was prepared by Willie Leach with code 244.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 5311-7924 CDRL2.pdf | ||
| SPMYM226Q5217 HOSE.pdf | ||
| 5311-7924 CDRL1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
STEAM SERVICE HOSE ASSEMBLY
IDN: N4523A 5311-7924
ICN: 88MSM00000 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. HOSE ASSEMBLY, RUBBER, METAL LINED WIRE REINFORCED, 250 PSIG, SATURATED
STEAM SERVICE.
1. Hose assemblies:
a. Hose classification, size, and construction: 1" ID BLACK EPDM SYNTHETIC
RUBBER, WIRE REINFORCED HOSE WITH PIN-PRICKED COVER.
b. Length (free or actual) of hose or hose legs and free length of hose: 25 FEET
c. Internal support: STAINLESS STEEL LINER.
d. Hydrostatic Test: Required: Testing parameters: 290 (+5, -0) PSIG for 15 min. with zero leakage or permanent deformation.
e. Type(s) of end fittings: 2 EA. - 1" MALE NPT STEEL FITTINGS DIXON
VALVE & COUPLING MS11 (BOSS MALE STEM).
f. Type(s) of clamps: CAMPBELL FITTINGS, IC-SERIES, DOUBLE U-BOLT
SIZED TO FIT THE OUTSIDE DIAMETER OF THE HOSE.
g. Order quantity: 130 AY.
B. Packaging and marking requirements: HOSES MUST BE MARKED WITH HOSE
MANUFACTURER, MODEL NUMBER, WORKING PRESSURE RATING, AND BATCH
NUMBER.
Additional requirements: ALL UNIT, INTERMEDIATE, AND SHIPPING CONTAINERS MUST BE
MARKED IN ACCORDANCE WITH MIL-STD-129. REFER TO DLA PROCUREMENT NOTE
C20 FOR FURTHER INSTRUCTIONS.
Prepared By: Willie Leach
Code: 244.4
File details come from the government source that posted it. Updated .