528A7-CSI-712 Renovate A320 for Canon Ultimax - Bid Drawings.pdf

PDF 7 MB Posted May 5, 2021

Attached to: Z1DA--528A7-CSI-712 RENOVATE A320 FOR CANON ULTIMAX
Solicitation number: 36C24221Q0677
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 2

View the file

Other files

File	Type	Posted
Y 26 1-1-21.pdf	PDF	May 5, 2021
36C24221Q0677_1.docx	DOCX document	May 5, 2021
528A7-CSI-712 Renovate A320 - Bid Specifications.pdf	PDF	May 5, 2021

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

G-001

KWSR

COVER

DRAWINGS INDEX

SHEET NO. DRAWING TITLE

GENERAL

1. GI-001 COVER SHEET

2. GC-101 INFECTION CONTROL (ICRA) PLAN

STRUCTURAL

3. S-100 STRUCTURAL PLANS

ARCHITECTURAL

4. A-001 ARCHITECTURAL ABBREVIATIONS, SYMBOLS & DETAILS

5. AE-101 LIFE SAFETY FLOOR PLAN

6. AD-101 ARCHITECTURAL DEMOLITION PLAN

7. A-101 ARCHITECTURAL PLAN

8. A-702 FINISH FLOOR PLAN & DETAILS

PLUMBING

9. P-001 PLUMBING ABBREVIATIONS, SYMBOLS AND NOTES

10. P-101 PLUMBING FLOOR PLAN

MECHANICAL

11. MG-001 MECHANICAL ABBREVIATION, SYMBOLS & NOTES

12. M-101 MECHANICAL PLAN

13. MI-701 CONTROLS DIAGRAM, SEQUENCE OF OPERATIONS & CONTROLS

POINTS

ELECTRICAL

14. EG-001 ELECTRICAL ABBREVIATION, SYMBOLS & NOTES

15. ED-101 ELECTRICAL DEMOLITION

16. EL-101 ELECTRICAL LIGHTING PLAN

17. EG-501 ELECTRICAL DETAILS

CANON ULTIMAX FOR REFERENCE

18. C1 COVERSHEET

19. A1 EQUIPMENT LAYOUT

20. A2 EQUIPMENT ELEVATIONS

21. A3 EQUIPMENT ELEVATIONS

22. S1 STRUCTURAL LAYOUTS

23. S2 STRUCTURAL DETAILS

24. E1 ELECTRICAL LAYOUT

25. E2 CONDUIT SCHEMATIC

26. E3 ELECTRICAL DETAILS

27. E4 CABLE LENGTH DIAGRAMS

KEY PLAN

SCALE: NONE

A320

THIRD FLOOR

AutoCAD SHX Text DEPARTMENT OF VETERANS AFFAIRS PROJECT NO. 528A7-CSI-712 VA MEDICAL CENTER BUILDING NO. 1 800 IRVING AVENUE SYRACUSE, NEW YORK, 13210

AutoCAD SHX Text

SYRACUSE VAMC RENOVATE A320 FOR CANON ULTIMAX

A320

RADIOLOGY

A324

CONTROL

A309A311

A308

A306

A307

A303

A301

B300

SERVICE ELEVATOR

A327

A318

A318A

A335

A336

A337

A3 15A317

A226

EXAM

A224

EXAM

120SF

A222

EXAM

A227A

ELECT

A220

EXAM

A228

EXAM

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

GC-101

KWSR

INFECTION CONTROL FLOOR PLAN

GENERAL NOTES:

1. CONTRACTOR MUST FOLLOW ALL INFECTION CONTROL PROCEDURES AND TEMPORARY

CONSTRUCTION DEFINED IN PROJECT SPECIFICATIONS.

2. CONTRACTOR SHALL MAINTAIN EGRESS FOR ALL OCCUPANTS AT ALL TIMES

THROUGHOUT CONSTRUCTION. THIS SHALL INCLUDE EGRESS FROM STAIR 3S2.

3. CONTRACTOR IS TO COORDINATE ALL WORK AND SCHEDULES WITH VAMC COR. SEE

SHEET AD-101 FOR ADDITIONAL INFORMATION.

4. NEGATIVE PRESSURE MUST BE MAINTAINED 24/7 IN EACH ACTIVE WORK AREA. SEE

SHEET AD-101 FOR ADDITIONAL INFORMATION.

5. NO CONTRACTOR STORAGE IS ACCEPTABLE IN CORRIDORS. ALL MATERIALS MUST BE

CONTAINED IN THE ACTIVE WORK AREA, OR ASSIGNED AREAS ACCEPTABLE TO THE

VAMC COR.

6. REFER TO SPECIFICATION SECTION 01 74 19 FOR CONSTRUCTION WASTE MANAGEMENT.

7. PROJECT AREA IS TO BE SEALED WITH A 2 HOUR FIRE-RATED TEMPORARY PARTITION

SUCH THAT NEGATIVE AIR PRESSURE IS MAINTAINED BETWEEN CORRIDOR(S) AND

ROOM BY EXHAUSTING AIR OUT OF WORK AREA.

8. TEMPORARY 2 HOUR FIRE-RATED BARRIERS ARE TO BE SEALED USING UL LISTED

MATERIALS TO INHIBIT TRANSFER OF DUST AND SMOKE. THEY SHALL ALSO BE

CONSTRUCTED TO MINIMIZE NOISE FROM CONSTRUCTION ACTIVITIES. ONCE IN PLACE,

THESE BARRIERS ARE TO BE INSPECTED AND ACCEPTED BY VAMC COR PRIOR TO

STARTING ANY CONSTRUCTION WORK.

9. PROVIDE DUST WALK-OFF MATS AT EACH ENTRANCE / EXIT TO PROJECT WORK AREA.

WALK-OFF MATS SHALL BE CHANGED WHEN THEY BECOME VISIBLY SOILED, OR AS

REQUIRED BY PROJECT SPECIFICATIONS.

10. PROVIDE TEMPORARY CONSTRUCTION SIGNAGE AT INTERIOR AND EXTERIOR OF

PROJECT WORK AREA. COORDINATE WITH VAMC COR ON REQUIREMENTS AND

LOCATIONS.

11. ANY WORK TO BE PERFORMED OUTSIDE OF THE CONSTRUCTION BARRIER SHALL BE

COORDINATED WITH THE VAMC COR.

12. ALL CONTRACTOR EQUIPMENT / CARTS, ETC. MUST BE WIPED DOWN PRIOR TO ENTRY

OR EXIT. ONCE IN, CARTS SHOULD BE WIPED DOWN PRIOR TO RELOCATION TO NEW

WORK AREA. THIS SHALL INCLUDE ALL EQUIPMENT / CART WHEELS.

13. PATCH ALL FINISHES DAMAGED BY TEMPORARY PARTITION INSTALLATION AND

REMOVAL TO MATCH EXISTING FINISHES.

14. THE CONTRACTOR SHALL NOT TRANSFER ANY CART THROUGH THE HOSPITAL THAT

DOES NOT HAVE A CLEAN COVER.

15. THE CONTRACTOR SHALL CLEAN THE SERVICE ELEVATORS IF CONSTRUCTION

MATERIAL IS TRACKED ON TO IT.

16. NEGATIVE AIR PRESSURE TO BE USED DURING PHASES OF CONSTRUCTION.

DRAWING LEGEND:

TEMPORARY ICRA 2 HOUR FIRE-RATED BARRIER WITH 36" 11

2 HOUR DOOR

CONSTRUCTION WORK BOUNDARY

WALK-OFF MAT

INFECTION CONTROL FLOOR PLAN

SCALE: 1/4" = 1'-0"1

2ND FLOOR INFECTION CONTROL PLAN

SCALE: 1/8" = 1'-0"2

N ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

A-001

KWSR

ABBREVIATIONS, SYMBOLS, AND

NOTES

ARCHITECTURAL ABBREVIATIONS

@ AT

∠ ANGLE

℄ CENTERLINE

[ CHANNEL

┴ PERPENDICULAR

⅊ PLATE

∅ ROUND/DIAMETER

AB ANCHOR BOLT

AFF ABOVE FINISH FLOOR

A/C AIR CONDITIONING

ACC ACCESSIBLE

ACS PNL ACCESS PANEL

ADDM ADDENDUM

ADJ ADJACENT, ADJUSTABLE

AHR ANCHOR(AGE)

ALT ALTERNATE

ALUM ALUMINUM

ANNPNL ANNUNCIATOR PANEL

ANOD ANODIZED

ACT ACOUSTICAL CEILING TILE

APPROX APPROXIMATE

ARCH ARCHITECT(URAL)

ASB ASBESTOS

ASPH ASPHALT

B/O BOTTOM OF

BEV BEVELED

BD BOARD

BLDG BUILDING

BLKG BLOCKING

BLKT BLANKET

BM BEAM, BENCHMARK

BRG BEARING

BRK BRICK

BSMT BASEMENT

BUR BUILT-UP ROOF

BW BOTH WAYS

CI CAST IRON

CIP CAST-IN-PLACE

CJ CONTROL JOINT

CLL CONTRACT LIMIT LINE

CMP CORRUGATED METAL PIPE

CMT CERAMIC MOSAIC TILE

CMU CONCRETE MASONRY UNIT

CT CERAMIC TILE

CAB CABINET

CH BD CHALKBOARD

CEM CEMENT

CLO CLOSET

CLG CEILING

CLR CLEAR

CMPST COMPOSITE

COL COLUMN

COMB COMBINATION

CONC CONCRETE

CONSTR CONSTRUCTION

CONT CONTINUOUS

CONTR CONTRACTOR

COORD COORDINATE

CORR CORRIDOR

CPRS FL COMPRESSIBLE FILLER

CPT CARPET

CR CARDREADER

CRS COLD ROLLED STEEL

D DEPTH

DF DRINKING FOUNTAIN

DH DOUBLE HUNG

DR DOOR

DEFL DEFLECTION

DIA DIAMETER

DIAG DIAGONAL

DIMEN DIMENSION

DL DEAD LOAD

DTL DETAIL

DWG DRAWING

EA EACH

EJ EXPANSION JOINT

EP ELECTRIC PANEL

EIFS EXTERIOR INSULATION

& FINISH SYSTEM

EL ELEVATION

ELEC ELECTRIC(AL)

ELEV ELEVATOR

EMHO ELECTROMAGNETIC HOLD OPEN

ENTR ENTRANCE

EQ EQUAL

EQUIP EQUIPMENT

ESTIM ESTIMATE

EWC ELECTRIC WATER COOLER

EXIST EXISTING

EXH EXHAUST

EXP EXPOSED, EXPANSION

EXT EXTERIOR

FCU FAN COIL UNIT

FD FLOOR DRAIN

FE FIRE EXTINGUISHER

FEC FIRE EXTINGUISHER CABINET

FH FIRE HYDRANT

FLG FLOORING

FO FINISHED OPENING

FP FIREPROOFING

F/O FACE OF

FAAP FIRE ALARM ANNUNCIATOR PANEL

FDN FOUNDATION

FIN FINISH(ED)

FIXT FIXTURE

FLASH FLASHING

FLR FLOOR

FM FACTORY MUTUAL

FR FRAME

FRMG FRAMING

FRP FIBERGLASS REINFORCED

PLASTIC/PANEL

FRTW FIRE RETARDANT TREATED WOOD

FT FOOT/FEET

FTG FOOTING

FURG FURRING

FURN FURNISHED/FURNITURE

FWC FABRIC WALL COVERING

GB GRAB BAR

GC GENERAL CONTRACTOR

GCT GLAZED CERAMIC TILE

GA GAUGE GALV GALVANIZED

GL GLASS, GLAZING

GWB GYPSUM WALLBOARD

GYP GYPSUM

HT HEIGHT

HC HOLLOW CORE

HM HOLLOW METAL

HCP HANDICAPPED

HDBD HARDBOARD

HDWD HARDWOOD

HDW HARDWARE

HORIZ HORIZONTAL

HR HOUR

HVAC HEATING/VENTILATING/AIR COND.

ID INSIDE DIAMETER

INCL INCLUDE(D) (-ING)

INSUL INSULATE(D) (-ION) (-ING)

INT INTERIOR

INV INVERT

JAN JANITOR

JT JOINT LAM LAMINATE(D)

LAV LAVATORY

LF LINEAR FEET

LL LIVE LOAD

LLH LONG LEG HORIZONTAL

LLV LONG LEG VERTICAL

Loc LocATE(D) (-ION)

LT-GA LIGHT GAUGE

LTG LIGHTING

LVR LOUVER

MO MASONRY OPENING

MR MOISTURE RESISTANT

MACH MACHINE

MATL MATERIAL

MAX MAXIMUM

MECH MECHANICAL

MET METAL(LIC)

MEZZ MEZZANINE

MFR MANUFACTURER

MIN MINIMUM

MISC MISCELLANEOUS

MKR BD MARKER BOARD

MLDG MOULDING

MMB MEMBRANE

MTL METAL

MULL MULLION

NA NOT APPLICABLE

NAT NATURAL

NIC NOT IN CONTRACT

NO NUMBER

NOM NOMINAL

NPS NOMINAL PIPE SIZE

NTS NOT TO SCALE

OA OVERALL

oc ON CENTER

OD OUTSIDE DIAMETER

OPNG OPENING

OPP OPPOSITE

OPH OPPOSITE HAND

OSU OHIO STATE UNIV. (TEST)

P&M PATCH & MATCH

PBD PARTICLE BOARD

PCT PORCELAIN CERAMIC TILE

PERIM PERIMETER

PL PLASTIC

PLAM PLASTIC LAMINATE

PLAS PLASTER

PLBG PLUMBING

PLYWD PLYWOOD

PNL PANEL

P PAINT

PNTD PAINTED

PR PAIR

PREFAB PREFABRICATE(D)

PT PRESSURE TREATED

PTD PAPER TOWER DISPENSER

PTN PARTITION

PVC POLYVINYL CHLORIDE

PVG PAVING

QT QUARRY TILE

QTY QUANTITY

R RADIUS/RISER

RB RESILIENT BASE

RCP REFLECTED CEILING PLAN

RD ROOF DRAIN

REF REFERENCE

REINF REINFORCE

REQ'D REQUIRED

RESIL RESILIENT

RESIL C RESILIENT CHANNEL

RET RETURN

REV REVISION

RM ROOM

RO ROUGH OPENING

RUB RUBBER

SC SOLID CORE

SST STAINLESS STEEL

STC SOUND TRANSMISSION CLASS

SCHED SCHEDULE

SECT SECTION

SHT SHEET

SHTHG SHEATHING

SIM SIMILAR

SLNT SEALANT

SND SANITARY NAPKIN DISPENSER

SNDU SANITARY NAPKIN DISPOSAL UNIT

SPEC SPECIFICATION

SPKLR SPRINKLER

SQ SQUARE

SSM SOLID SURFACE MATERIAL

STL STEEL

STD STANDARD

STRUCT STRUCTURAL

SUSP SUSPENDED

SYMM SYMMETRICAL

DC DOOR CONTROL

EFTR EXIST FINISH TO REMAIN

RF RAISED RUBBER FLOORING

RTF RESILIENT TILE FLOORING

RST RESILIENT STAIR TREADS

VSF VINYL SHEET FLOORING (HEAT

WELDED SEAMS)

PFW POLYPROPYLENE FABRIC WALL

COVERING

PCP PORTLAND CEMENT PLASTER

ICB INTEGRAL COVE BASE

BE BAKED ON ENAMEL

SD SOAP DISPENSER

TPD TOILET PAPER DISPENSER

MTD MOUNTED

FC FILE CABINET

DISTR DISTRIBUTION

AMP ACOUSTICAL METAL PANEL

RCT RADIANT CEILING TILE

CTG COATING

REF REFRIGERATOR

MW MICROWAVE

LGMF LIGHT GA METAL FRAMING

ZVB ZONE VALVE BOX

ZA ZONE ALARM

CC CONTRACTOR SUPPLIED &

INSTALLED

VV VA SUPPLIED & INSTALLED

VC VA SUPPLIED & CONTRACTOR

INSTALLED

MC METAL CEILING

VAMC SYRACUSE VA MEDICAL CENTER

COR CONTRACTING OFFICER'S

REPRESENTATIVE

TREAD T T&G TONGUE & GROOVE

T/CONC TOP OF CONCRETE

T/D TOP OF DECK

T/O TOP OF

T/S TOP OF STEEL

T/W TOP OF WALL

TK BD TACKBOARD

TEL TELEPHONE

TMPD TEMPERED

TEMP TEMPERATURE

TERM TERMINAL

TER TERRAZZO

THK THICK(NESS)

THRES THRESHOLD

TRANS TRANSOM, TRANSPARENT

TYP TYPICAL

UC UNDERCUT

UNO UNLESS NOTED OTHERWISE

UC UNIV. OF CALIF. (TEST)

UL UNDERWRITER'S LAB. (TEST)

UR URINAL

VB VINYL BASE

VCT VINYL COMPOSITION TILE

VERT VERTICAL

VEST VESTIBULE

VIF VERIFY IN FIELD

VNR VENEER

VP VENEER PLASTER

VR VAPOR RETARDER

VWC VINYL WALLCOVERING

W WIDE

WC WATER CLOSET

WGL WIRE GLASS

WP WATERPROOF

WPT WORKPOINT

WR WATERREPELLENT/RESISTANT

WS WEATHER STRIP

WWF WELDED WIRE FABRIC

W/ WITH

W/O WITHOUT

WDW WINDOW

WD WOOD

XFMR TRANSFORMER

JOB SPECIFIC ABBREVIATIONS

CONTRACT LIMIT LINE

DEMOLITION LINE

ELEVATION INDICATOR

CENTER LINE INDICATOR

EXISTING TO REMAIN LINE

FEATURES ABOVE LINE INDICATOR

HIDDEN FEATURES LINE

NEW LINE

PROPERTY LINE

SMOKE BARRIER LINE

BREAK, ROUND (USER DEFINES SIZE)

BREAK, STRAIGHT (SEE SECTION

INDICATORS,

BUILDING, WITH BREAK STANDARDS)

DETAIL INDICATOR

DETAIL INDICATOR FOR SMALL CONDITIONS

DIMENSION LINE

DOOR OPENING

TYPICAL DRAWING BLOCK OR DETAIL TITLE

ELEVATION INDICATOR, EXTERIOR

ELEVATION INDICATOR; INTERIOR, MULTIPLE

VIEW

ELEVATION INDICATOR, INTERIOR, SINGLE

VIEW

ARCHITECTURAL SYMBOLS

CENTER LINE

FURNITURE, FIXTURE, & EQUIPMENT

INDICATOR

GRAPHIC SCALE; 18"=1'-0"

A-201 A4

ROOM NAME AND NUMBER

COLUMN GRID

KEYNOTE

WALL OR PARTITION TYPE

FIRE EXTINGUISHER CABINET

CORNER GUARD

NORTH ARROW

EXISTING CONSTRUCTION TO

REMAIN

EXISTING CONSTRUCTION TO

BE REMOVED

NEW CONSTRUCTION

CONCRETE

RIGID

INSULATION

BATT

INSULATION

V V ITEM - VA SUPPLIED & INSTALLED

VC ITEM - VA SUPPLIED & CONTRACTOR

INSTALLED

CC ITEM - CONTRACTOR SUPPLIED &

INSTALLED

DETAIL NUMBER

SHEET WHERE REF.

SHEET WHERE DRAWN

BUILDING SECTION INDICATOR

DETAIL INDICATOR

MATERIALS LEGEND

D2 A-512

A4 A-201

10'-0"

C B

FEC

A-202 A2

A3.1 A4.3

16'8'4'0

D2 A-512

121212

EXISTING DOOR TO REMAIN, IN EXISTING

PARTITION.

EXISTING DOOR TO BE REMOVED: SEE

REMOVAL PLAN.

NEW DOOR IN NEW OR EXISTING PARTITION:

SEE DOOR SCHEDULE.

XXX

CORRIDOR

SMOKE WALLS

1 HR FIRE RATED WALL

2 HR FIRE RATED WALL

EXIT TRAVEL PATH

CLG

VARIES

CLG

STRUCTURE/SLAB.

ABOVE, AS REQUIRED.

STUDS AT STRUCTURE

FOR DETAILS. BRACE

VARY; SEE DRAWINGS

BULKHEAD CONDITIONS

STOP ALL MATERIAL

AT CEILING.

STOP GWB ABOVE

CEILING ONE SIDE;

EXTEND ALL OTHER

MATERIALS TO

UNDERSIDE OF

HEIGHTS.

DRAWINGS FOR

LOW WALL, SEE

AS REQUIRED.

STRUCTURE ABOVE,

BRACE STUDS AT

ABOVE CEILING &

EXTEND GWB MATERIAL

STRUCTURE/SLAB.

TO UNDERSIDE OF

EXTEND ALL MATERIAL

HEIGHT TYPES :

4-1/4"

3 5/8" METAL STUDS - 20 GA AT

16"oc

1 LAYER 5/8" GWB - TYPE 'X' BOTH

SIDES.

1 HR FIRE-RATED

UL TEST: U-465

STC = 47

W/ 2" BATT INSULATIONW/ 2 1/2" BATT INSULATION

1 5/8" METAL STUD FURRING - 20

GA AT 16"oc

1 LAYER 5/8" GWB 6

3 5/8" METAL STUDS - 20 GA AT

16"oc

2 LAYERS 5/8" GWB - TYPE 'X'

BOTH SIDES.

1 LAYER 5/8" GWB LAMINATE TO

EXISTING PLASTER

7/8" FURRING

1 LAYER 5/8" GWB

W/ 31

2" BATT INSULATION

2 HR FIRE-RATED

UL TEST: U-618

1 LAYER 5/8" GWB - TYPE 'X'

2 1/4" METAL STUDS - 20 GA AT

16"oc

1 5/8" METAL STUD FURRING - 20

GA AT 16"oc

1 HR FIRE-RATED

UL TEST: U-465

STC = 47

3 5/8" METAL STUDS - 20 GA AT

16"oc

1 LAYER 5/8" GWB - TYPE 'X' ONE

SIDES.

A324

CONTROL

A309A311

A308

A306

A307

A303

A301

B300

SERVICE ELEVATOR

A318

A318A

A335

A336

A337

A3 15A317

A226

EXAM

A224

EXAM

120SF

A222

EXAM

A227A

ELECT

A220

EXAM

A228

EXAM

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

AE-101

KWSR

LIFE SAFETY FLOOR PLAN

1ST FLOOR LIFE SAFETY PLAN

SCALE: 1/4" = 1'-0"1

CODE SYNOPSIS

PROJECT OVERVIEW:

RENOVATE A320 FOR CANON ULTIMAX

SYRACUSE VA MEDICAL CENTER

APPLICABLE CODES:

· NFPA 13-2016 STANDARD FOR THE INSTALLATION OF SPRINKLER SYSTEMS

· NFPA 14-2016 STANDARD FOR THE INSTALLATION OF STANDPIPE AND HOUSE

SYSTEMS

· NFPA 24-2013 STANDARD FOR THE INSTALLATION OF PRIVATE FIRE SERVICE

MAINS AND THEIR APPURTENANCES

· NFPA 72-2016 NATIONAL FIRE ALARM CODE

· NFPA 90A-2018 STANDARD FOR THE INSTALLATION OF AIR CONDITIONING AND

VENTILATING SYSTEMS

· NFPA 99-2018 STANDARD FOR HEALTH CARE FACILITIES

· NFPA 101-2018 LIFE SAFETY CODE

· NFPA 220-2012 STANDARD ON TYPES OF BUILDING CONSTRUCTION

· NFPA 291-2013 RECOMMENDED PRACTICE FOR FIRE FLOW TESTING AND

MARKING OF HYDRANTS

· NFPA 1963-2009 STANDARD FOR FIRE HOSE CONNECTIONS

· VA DESIGN GUIDE AND TECHNICAL GUIDE

· VA FIRE PROTECTION DESIGN MANUAL - DECEMBER 2015

· UNIFORM FEDERAL ACCESSIBILITY STANDARDS WITH VA BARRIER FREE DESIGN

GUIDE (PG 18-13)

BUILDING USE CLASSIFICATION:

HEALTH CARE

EXISTING HEALTH CARE OCCUPANCY (NFPA 101 - CHAPTER 19)

BUILDING CONSTRUCTION:

BUILDING STRUCTURE: STEEL COLUMNS/BEAMS, ENCASED IN CONCRETE,

CONCRETE SLABS

NUMBER OF STORIES: ELEVEN (B, G, 1-9) PLUS PENTHOUSE

CONSTRUCTION TYPE: TYPE II (222) NFPA-101

SPRINKLER: FULLY SPRINKLERED IN ACCORDANCE WITH "NFPA13 -

INSTALLATION OF SPRINKLER SYSTEMS"

FIRE EXTINGUISHERS: PROVIDE IN ACCORDANCE WITH

"NFPA-10-PORTABLE FIRE EXTINGUISHERS" WITH TRAVEL DISTANCE - OF 75 FT.

MAX. ALLOWABLE NUMBER OF STORIES (ABOVE GRADE):

EXISTING

MAX ALLOWABLE AREAS:

LIFE SAFETY CODE: UNLIMITED

BUILDING COMPONENTS NFPA 220 2012

NFPA 101 2018

RATED CONSTRUCTION FIRE RATING (IN HOURS)

EXTERIOR WALLS -

LOAD BEARING 2

NON-LOADBEARING 0

INTERIOR BEARING WALLS 2

RATED CONSTRUCTION FIRE RATING (IN HOURS)

EXIT, EXIT HALLWAY STAIRWAY ENCLOSURE 2

(4 OR MORE STORIES)

MECHANICAL SHAFTS, ELEVATOR HOIST WAYS 2

(4 OR MORE)

EXIT ACCESS CORRIDORS 0 (SMOKE TIGHT)

HORIZONTAL EXITS NA

MIN. # OF EXITS/FLOOR (<500 OCCUP. LOAD) 2

(>501-1,000) 3

SMOKE BARRIERS 1

COLUMNS 2

COLUMNS (ROOF ONLY) 1

BEAMS 1

BEAMS (ROOF ONLY) 1

FLOOR CONSTRUCTION (INCLUDING BEAMS) 2

ROOF CONSTRUCTION -

SOILED LINEN ROOMS 1 HR

STORAGE ROOMS MORE THAN 100 SF 1 HR

TRAVEL DISTANCE (FT)

· FROM ANY POINT TO EXIT (WITH AUTO FIRE SUPP. SYS) 200 FT

(19.2.6.2.1 & 19.26.2.2)

· MAXIMUM DEAD END LENGTH REQUIRED 30 FT (19.2.5.2)

(SPRINKLERED BUILDING)

· FROM ANY POINT WITHIN SLEEPING ROOM TO 50 FT (19.2.6.2.3)

EXIT ACCESS CORRIDOR

· FROM ANY POINT IN NON-PATIENT SLEEPING 100 FT/1 ROOM 100 FT.

(WITH AUTO FIRE SUPP SYS)

· SUITE TO EXIT ACCESS CORRIDOR/NUMBER 50 FT/2 ROOMS (12-2.5.8) OF

INTERVENING ROOMS TO EXIT CORRIDOR

REQUIRED EGRESS WIDTH:

DOORWAYS 34" MIN.

STAIR DOORS 36" WIDE

STAIRS 44"

CORRIDOR WIDTH 44"

OPENING PROTECTIVES IN RATED CONSTRUCTION

DOORS IN OTHER 1 HR. RATED CONSTRUCTION 3/4 HR., LABEL "C"

DOORS IN 2 HR. RATED CONSTR. (SELF CLOSING) 1-1/2 HR., LABEL "B"

DOORS IN SMOKE BARRIER PARTITIONS (SELF CLOSING) 3/4 HR

SMOKE COMPARTMENT

· MINIMUM OF 2 PER FLOOR 19.3.7.1

· MAXIMUM OF 22,500 SF 19.3.7.1 (4)

· IF LESS THEN 150 FT IN LENGTH OR WIDTH, TRAVEL DISTANCE TO IS NOT

LIMITED.

DRAWING LEGEND

SMOKE WALL

1 HR. FIRE RATED WALL

2 HR. FIRE RATED WALL

EXIT TRAVEL PATH

TEMPORARY 2 HR. RATED

PARTITION

PROJECT WORK BOUNDRY

108 FT TO EXIT STAIRWELL

12 FT

2ND FLOOR LIFE SAFETY PLAN

SCALE: 1/8" = 1'-0"2

22 FT TO EXIT ROOM

15 FT TO EXIT ROOM

34 FT TO STAIRWELL

A324

CONTROL

A318

A318A

A320

RADIOLOGY

A324

CONTROL

A318

A318A

A226

EXAM

A224

EXAM

120SF

A222

EXAM

A227A

ELECT

A228

EXAM

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

AD-101

KWSR

ARCHITECTURAL DEMOLITION

PLANS

ARCHITECTURAL DEMOLITION FLOOR PLAN

SCALE: 1/4" = 1'-0"1

GENERAL REMOVAL NOTES:

1. THE DEMOLITION AND ALTERATION NOTES ON THIS PLAN SHALL NOT BE

DEEMED TO BE ALL-INCLUSIVE. PRIOR TO THE START OF DEMOLITION

INSPECT AND ASSESS EACH AREA AND TO FULFILL THE DESIGN INTENT

OF THE WORK INDICATED BY THE PROJECT DOCUMENTS.

2. VERIFY ALL CONDITIONS AND DIMENSIONS WITHIN THE PROJECT LIMITS

AND NOTIFY THE COR IMMEDIATELY OF ANY DEVIATION FROM PROJECT

DOCUMENTS NECESSITATED BY FIELD CONDITIONS OR ITEMS NOT

COVERED.

3. DASHED LINES ON DEMOLITION PLANS REPRESENT WALLS, DOORS,

SOFFITS, CEILINGS, CASEWORK, ETC. TO BE REMOVED.

4. FOR ALL SURFACES SCHEDULED TO REMAIN, PATCH, MATCH SURFACES

DISTURBED BY DEMOLITION OR REMOVAL OF EQUIPMENT OR UTILITIES.

PROVIDE PATCHING TO MATCH ADJACENT WORK IN FINISH, STRUCTURAL

QUALITIES, COURSING OF MASONRY AND OTHER CHARACTERISTICS.

PATCH SURFACES TO COMPLY WITH FIRE RATINGS, SMOKE-TIGHT

RATINGS, ACOUSTICAL CRITERIA AND OTHER PERFORMANCE CRITERIA

INDICATED. PREPARE SURFACES AS NECESSARY TO PROVIDE A PROPER

SUBSTRATE FOR SPECIFIED FINISH. REFINISH ENTIRE SURFACE CORNER

TO CORNER AS NECESSARY TO PROVIDE AN EVEN FINISH TO MATCH

ADJACENT FINISHES. ALL WORK SHALL REFLECT HIGHEST LEVEL OF

INDUSTRY STANDARDS FOR EACH TRADE.

5. ALL DEMOLITION SHALL BE PERFORMED IN A SAFE AND ACCEPTABLE

MANNER TO ALL AUTHORITIES HAVING JURISDICTION AND THE

SYRACUSE VAMC. A FIRE WATCH SHALL BE PROVIDED AS REQUIRED BY

SYRACUSE VAMC AND APPLICABLE CODES.

6. PROVIDE TEMPORARY PARTITIONS/DUST PROTECTION (RATED AND/OR

NON-RATED) AS REQUIRED BY ICRA. REVIEW LOCATIONS OF TEMPORARY

PARTITIONS/DUST PROTECTION WITH COR PRIOR TO START OF WORK.

7. HAZARDOUS MATERIAL NOTE: STOP WORK AND INFORM COR

IMMEDIATELY OF ANY HAZARDOUS MATERIAL ENCOUNTERED OR

THOUGHT TO BE HAZARDOUS. COR SHALL INSTRUCT CONTRACTOR ON

HOW TO PROCEED. HAZARDOUS MATERIAL NOT ANTICIPATED.

8. ALL WORK SHALL BE DONE IN PROTECTED SPACE. NO DUST, DIRT OR

LIQUID SHALL TRAVEL FROM CONSTRUCTION AREA TO ADJACENT AREAS.

TEMPORARY ICRA PARTITIONS SHALL BE ERECTED PRIOR TO

COMMENCING WORK.

9. PRIOR TO ANY DEMOLITION, COORDINATE BRACING AND MAINTAIN THE

STRUCTURAL INTEGRITY OF THE REMAINING ELEMENTS OF THE BUILDING

AND ITS SYSTEMS AS REQUIRED.

10. COMPLY WITH GOVERNING REGULATIONS PERTAINING TO

ENVIRONMENTAL PROTECTION FOR POLLUTION CONTROL.

THOROUGHLY CLEAN ADJACENT AREAS OF DUST, DIRT AND DEBRIS

CAUSED BY DEMOLITION WORK. BEFORE NEW WORK BEGINS, RETURN

ADJACENT AREAS TO CONDITION FOUND PRIOR TO START OF

DEMOLITION WORK.

11. REVIEW ALL ITEMS TO BE DEMOLISHED WITH COR TO IDENTIFY ANY ITEMS

TO BE SALVAGED PRIOR TO START OF DEMOLITION.

12. PREPARE FLOOR SLABS SO FINISH FLOORS ARE FLUSH WITH EACH

OTHER AND PREPARED TO ACCEPT NEW FINISH. SEE CANON DRAWINGS

FOR FLOOR LEVELNESS AND FLATNESS REQUIREMENTS OF EQUIPMENT.

13. MAINTAIN ACCESS TO EXITS AND EXIT STAIRS AT ALL TIMES. FIRE ALARM

AND SMOKE DETECTION SYSTEM SHALL REMAIN OPERATIONAL AT ALL

TIMES. PROTECT SMOKE DETECTORS AS REQUIRED AND IN

CONFORMANCE WITH CODES AND LOCAL AUTHORITIES HAVING

JURISDICTION.

14. PRIOR TO DEMOLITION, PERFORM A THOROUGH ABOVE-CEILING

INSPECTION FOR EXISTING SERVICES THAT ARE TO REMAIN AND NOTIFY

COR IMMEDIATELY OF ANY CONFLICTS WITH INSTALLATION OF NEW

WORK.

15. MAINTAIN 60" MINIMUM CLEARANCE AT ALL CORRIDORS AT ANY GIVEN

TIME.

16. DIVISION 13 - SPECIAL CONSTRUCTION

17. PROVIDE ROLLED LEAD FOR PATCHING AS REQUIRED. ALL OUTLET

BOXES, JUNCTION BOXES, ETC. IN LEADED WALLS SHALL BE LINED WITH

1/16" LEAD.

18. DURING CONSTRUCTION WORK AND PRIOR TO CLOSING WALLS AND

PENETRATIONS, LEAD PROTECTION WILL BE INSPECTED BY VA RADIATION

SPECIALIST.

3RD FLOOR CEILING DEMOLITION PLAN

SCALE: 1/4" = 1'-0"2

R2 R5

R4 R7 R7

R6 R3

R3R3

2ND FLOOR CEILING DEMOLITION PLAN

SCALE: 1/4" = 1'-0"2

R10

KEYED REMOVAL NOTES

REMOVE WELDED SEAM SHEET FLOORING, VCT AND MASTIC FROM

FLOOR SUBSTRATE. PATCH/ REPAIR ANY DAMAGE ASSOCIATED WITH

REMOVALS AND PREPARE EXISTING SUBSTRATE TO RECEIVE NEW

FINISH WORK.

REMOVE ACOUSTICAL CEILING TILE, ASSOCIATED GRID AND SUPPORT

HANGERS. PATCH AND REPAIR ANY DAMAGE ASSOCIATED WITH

REMOVAL. PREPARE WALLS TO RECEIVE NEW FINISH WORK AT EXISTING

WALLS TO REMAIN.

REMOVE WALL BASES AND ANY ADHESIVES AND RESIDUES.

REMOVE ALL LAMINATE COUNTERS AND BASE CABINETS. PATCH AND

REPAIR ALL WALLS AND FLOORS TO RECEIVE NEW MATERIALS. VERIFY

EXISTING MILLWORK DIMENSIONS PRIOR TO REMOVALS.

REPLACE CEILING TILES. GRID TO REMAIN.

REMOVE WALL PROTECTION. PATCH AND REPAIR ANY DAMAGE

ASSOCIATED WITH REMOVAL. PREPARE WALLS TO RECEIVE NEW FINISH

WORK.

SALVAGE LIGHT FIXTURE FOR REUSE AND RE INSTALL.

REMOVE SINK AND PATCH WALL TO RECEIVE NEW FINISH WORK.

SEE STRUCTURAL DRAWINGS FOR ADDITIONAL REMOVALS.

REMOVE CABINET AND PATCH WALL TO RECEIVE NEW FINISH WORK.

MODIFY AND RELOCATE EXISTING LAY IN CEILING SYSTEM UTILITIES AND

ALL ABOVE CEILING UTILITIES AS NEEDED TO COORDINATE STRUCTURAL

STEEL INSTALLATION.

R10

R11

R11 R11

R11

A324

CONTROL

A318

A318A

14'-6"

6' -7

3-∠6X6X3/8

16WF58 16WF58

16WF50 16WF50

16WF45

A320

RADIOLOGY

A324

CONTROL

ACT

8'-11 12"

8'- 2"

ACT

A318

A318A

9'-11 2"

7' -0

8W24

A226

EXAM

A224

EXAM

120SF

A222

EXAM

A227A

ELECT

A228

EXAM

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE VA

MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

A-101

KWSR

ARCHITECTURAL PLANS

EXISTING PLASTER &

LATH WALL

3RD ARCHITECTURAL FLOOR PLAN

SCALE: 1/4" = 1'-0"1

GENERAL PLAN NOTES:

1. FOLLOW ALL INFECTION CONTROL PROCEDURES AND TEMPORARY

CONSTRUCTION DEFINED IN PROJECT SPECIFICATION & VA APPROVED ICRA.

2. NEGATIVE PRESSURE MUST BE MAINTAINED 24/7 IN EACH ACTIVE WORK

AREA.

3. NO STORAGE IS ACCEPTABLE IN CORRIDORS. ALL MATERIALS MUST BE

CONTAINED IN THE ACTIVE WORK AREA.

4. PROVIDE WALK OFF MATS BY EACH DOOR OUTSIDE EACH ROOM IDENTIFIED

AS A CONSTRUCTION AREA FOR THE DURATION OF THE PROJECT. SEE DWG.

GC-101

5. ALL EQUIPMENT / CARTS ETC. MUST BE WIPED DOWN PRIOR TO ENTRY.

ONCE IN, CARTS SHOULD BE WIPED DOWN PRIOR TO BE TAKEN OUTSIDE OF

THE CONSTRUCTION AREA.

6. PROVIDE THOROUGH CLEANING FOLLOWING EACH WORK DAY. ALL DEBRIS

MUST BE REMOVED BY END OF DAY.

7. VERIFY ALL EXISTING CONDITIONS AND ESTABLISHING THE COMPATIBILITY

OF ALL NEW WORK WITH THE EXISTING CONDITIONS.

8. ALL WORK IS BEING DONE ADJACENT TO, & BELOW, OCCUPIED SPACE. TAKE

EVERY PRECAUTION TO ELIMINATE THE TRAVEL OF LIQUID, DUST AND DIRT

FROM THE CONSTRUCTION AREA TO THOSE SPACES.

9. TAKE EVERY PRECAUTION TO MINIMIZE DISRUPTION WITH ADJACENT

OCCUPIED SPACE. SCHEDULE AND SEQUENCING OF WORK TO BE

COORDINATED WITH COR PRIOR TO BEGINNING WORK.

10. PATCH ALL SURFACES TO REMAIN AFFECTED BY DEMOLITION OR REMOVAL

OF EXISTING EQUIPMENT & CONSTRUCTION. NEW SURFACES TO BE FILLED,

SANDED SMOOTH & FINISHED TO MATCH ADJACENT SURFACE.

11. MAINTAIN EXISTING UTILITIES INDICATED TO REMAIN, KEEP IN SERVICE, AND

PROTECT AGAINST DAMAGE DURING ALL RENOVATION WORK. COORDINATE

CONSTRUCTION AROUND EXISTING EQUIPMENT, CONDUIT CABLING, ETC.

WITH COR AS REQUIRED TO MAINTAIN CONTINUOUS OPERATION.

12. COORDINATE EXACT LOCATION OF ALL NEW EQUIPMENT TO BE INSTALLED IN

CEILING WITH EXISTING MECHANICAL AND ELECTRICAL WORK TO REMAIN IN

PLACE. SEE CANON EQUIPMENT DRAWINGS FOR EQUIPMENT REQUIREMENT.

13. COMPLY WITH GOVERNING REGULATIONS PERTAINING TO ENVIRONMENTAL

PROTECTION FOR POLLUTION CONTROL & HAZARDOUS MATERIALS.

14. ALL PENETRATIONS IN RATED ASSEMBLIES SHALL BE SEALED WITH UL/FM

APPROVED MATERIAL ASSEMBLIES AND PROCEDURES.

15. ALL DIMENSIONS ARE FROM FINISH FACE OF WALL TO FINISH FACE OF WALL.

16. LOCATE ALL NEW DOORS 5" FROM INSIDE CORNER UNLESS NOTED

OTHERWISE.

17. CONTRACTOR TO PROVIDE NON COMBUSTIBLE BLOCKING AS REQUIRED

BEHIND ALL WALLS FOR PROPER INSTALLATION OF BUMPER GUARDS, WALL

MOUNTED EQUIPMENT, WALL CABINETRY, ETC.

18. DRAWINGS SHALL NOT BE SCALED AS A BASIS FOR ESTABLISHING

DIMENSIONS OR OTHER INFORMATION.

19. ALL NEW CORRIDOR WALLS MUST HAVE THE SAME FIRE/SMOKE RATING AS

THE WALL THEY ARE MEETING. REFER TO THE LIFE SAFETY DRAWINGS FOR

DESIGNATION.

20. ALL BLOCK WALLS SHALL HAVE LAMINATE GWB ON THEM AND BE FLUSH AND

SQUARED.

21. NO TILE SHALL BE LESS THAN 50% OF THE WIDTH OF THE TILE ALONG THE

WALL.

22. IN AREAS OF NEW PARTITION WORK WITHIN EXISTING BUILDING: MODIFY

EXISTING GRID AND CEILING TILES AT INTERSECTIONS WITH NEW

PARTITIONS. CUT EXISTING GRID AND CEILING TILES AS NECESSARY TO

ACCOMMODATE NEW WORK. PROVIDE NEW CEILING EDGE TRIM AND

RELATED COMPONENTS AS NEEDED TO MATCH AND COMPLETE EXISTING

SYSTEM.

23. IN AREAS OF NEW CEILING WORK WITHIN EXISTING BUILDING: CONTINUE

EXISTING GRID AND CEILING TILES AS SHOWN. USE EXISTING GRID AND

TILES FROM AREAS TO BE REMOVED OR PROVIDE NEW TO MATCH EXISTING.

ALIGN NEW GRID WITH EXISTING.

24. PROVIDE CAULK BETWEEN WALL AND CEILING GRID.

25. IF NECESSARY, RELOCATED SPRINKLER HEADS TO BE LOCATED IN THE

CENTER OF THE GRIDS.

26. CEILING GRID SHALL BE INSTALLED PER ASTM C636 /C636M, "STANDARD

PRACTICE FOR INSTALLATION OF METAL CEILING SUSPENSION SYSTEMS

FOR ACOUSTICAL TILE AND LAY-IN PANELS".

27. DIVISION 13 - SPECIAL CONSTRUCTION PROVIDE ROLLED LEAD FOR

PATCHING AS REQUIRED. ALL OUTLET BOXES, JUNCTION BOXES, ETC. IN

LEADED WALLS SHALL BE LINED WITH 1/16" LEAD.

3RD FLOOR REFLECTED CEILING PLAN

SCALE: 1/4" = 1'-0"2

KEYED NOTES:

PATCH WALL AND LEAD LINING FOLLOWING WALL

BUCKEY REMOVAL. LEAD LINING SHALL BE 116" THICK

AND CONTINUOUS.

USE 2' X 4' CEILING TILES CUT DOWN TO SIZE TO INFILL

CEILING AT UNISTRUT FOR TRACK. SEE STRUCTURAL

DRAWINGS FOR SUPPORT INSTALLATION.

INSTALL NEW SOLID SURFACE COUNTERS AND BASE

CABINETS. CONTRACTOR TO VERIFY EXISTING

DIMENSIONS PRIOR TO MILL WORK. CONTRACTOR TO

MATCH EXISTING DIMENSIONS.

CONTRACTOR TO MATCH EXISTING CEILING HEIGHT.

REFER TO CANON DRAWING FOR ADDITIONAL

DIMENSION & DETAILS.

MODIFY AND RELOCATE EXISTING LAY IN CEILING

SYSTEM UTILITIES AND ALL ABOVE CEILING UTILITIES

AS NEEDED TO COORDINATE STRUCTURAL STEEL

INSTALLATION.

EQEQ

2'x4' SUSPENDED ACOUSTIC CEILING

SUSPENDED ACOUSTIC CEILING

(W/FALSE JOINT)

2'x2' SUSPENDED ACOUSTIC CEILING

GWB CEILING

GWB SOFFIT AT CEILING

HEIGHT TRANSITION

VERTICAL DIFFUSERS AT SOFFITS

SUPPLY DIFFUSER GRILLE

RETURN DIFFUSER GRILLE

CEILING PENDANT SPRINKLER HEAD

FIRE ALARM SMOKE DETECTOR

EXIT SIGN

CAN (RECESSED & SEMI-RECESSED)

LIGHT FIXTURES

LED LIGHT FIXTURE (2x2)

SUSPENDED FLUORESCENT OR LED

LIGHT FIXTURE

SUSPENDED LIGHT FIXTURE

BELOW CEILING

LAYOUT INSTRUCTIONS:

EQ = EQUAL SPACES

= START @ THIS WALL W/STANDARD GRID

= ALIGN NEXT ROOMS GRID W/THIS GRID

SOFFIT-MOUNTED CAN LIGHT

FIXTURES AT SKYLIGHT WALLS OR

WALL-MOUNTED LIGHTS DIRECTLY

BELOW CEILING

OCCUPANCY / MOTION SENSOR

CEILING LEGEND

PA P.A. SPEAKER

LED LIGHT FIXTURE (2x2)

NIGHT LIGHT-LIFE SAFETY CIRCUITLS16

54 LED LIGHT FIXTURE (2x4)

A-702 A

2ND FLOOR REFLECTED CEILING PLAN

SCALE: 1/4" = 1'-0"2

6 6 6

A324

CONTROL

A320

RADIOLOGY

A320

RADIOLOGY

A324

CONTROL

A318A

3' 3' 3' on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE

VA MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

528A7-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

A-702

KWSR

FINISH FLOOR PLAN & DETAILS

MATERIAL LEGEND

SCALE: NONE3

FINISH SCHEDULE

SCALE: NONE2

FINISH FLOOR PLAN

SCALE: 1/4" = 1'-0"1

COUNTER TOP DETAILS

SCALE: 1" = 1'-0"4A COUNTER TOP DETAILS

SCALE: 1" = 1'-0"4B

A-702 A

FINISH NOTES:

ALL WALLS IN A320 TO BE PAINTED WITH PT-1.

ALL WALLS IN A324 TO BE PAINTED WITH PT-1.

WALL PROTECTION TO REMAIN & PAINT EXCEPT AS NOTED ON 1/A-702.

CONTRACTOR TO REPLICATE DIMENSION OF EXISTING CABINETS.

REPLACE SECTION OF WALL PROTECTION AND PAINT TO MATCH.

PLUMBING ABBREVIATIONS

A/E ARCHITECT / ENGINEER

AD AREA DRAIN/ACCESS DOOR

AFF ABOVE FINISH FLOOR

AFG ABOVE FINISH GRADE

AG AIR GAP

AP ACCESS PANEL

AS AUTOMATIC SPRINKLER

ASD ADJUSTABLE SPEED DRIVES

ASD AUTOMATIC SPRINKLER DRAIN

ASHRAE AMERICAN SOCIETY OF HEATING, REFRIGERATION, AIR

CONDITIONING ENGINEERS

ASME AMERICAN SOCIETY OF MECHANICAL ENGINEERS

ASPE AMERICAN SOCIETY OF PLUMBING ENGINEERS

ASR AUTOMATIC SPRINKLER RISER

AV ACID VENT

AW ACID WASTE

BFP REDUCED PRESSURE BACKFLOW PREVENTER

BHP BREAK HORSEPOWER

BSP BLACK STEEL PIPE

BT BATHTUB

BTU BRITISH THERMAL UNIT

BTUH BRITISH THERMAL UNIT PER HOUR

C CELSIUS

CA COMPRESSED AIR

CGA COMPRESSED GAS ASSOCIATION

CFM CUBIC FEET PER MINUTE

CI CAST IRON

CO CLEANOUT

COR CONTRACTING OFFICER'S REPRESENTATIVE

CS CLINICAL SINK

CV CONTROL VALVE

DCW DOMESTIC COLD WATER

DFU DRAINAGE FIXTURE UNITS

DHW DOMESTIC HOT WATER

DHWR DOMESTIC HOT WATER RETURN

DHWS DOMESTIC HOT WATER SUPPLY

DI DEIONIZED WATER

DN DOWN

DOE DEPARTMENT OF ENERGY

DS DOWNSPOUT

DW DISHWASHER

DWG DRAWING

DWH DOMESTIC WATER HEATER

DWR DRINKING WATER RETURN

DWS DRINKING WATER SUPPLY

DWV DRAIN WASTE VENT

EL ELEVATION

EMCS ENERGY MONOSERRAT AND CENTRAL SYSTEM

EPA ENVIROMENTAL PROTECTION AGENCY

EPACT ENERGY POLICY ACT

ESC ESCUTCHEON

ESH EMERGENCY SHOWER

ET EXPANSION TANK

EWH ELECTRIC WATER HEATER

EWS EYE WASH STATION

EWS/SH EYE WASH/DRENCH SHOWER

EX EXISTING

F FAHRENHEIT

FCO FLOOR CLEANOUT

FCW FILTERED COLD WATER

FD FLOOR DRAIN

FDC FIRE DEPARTMENT CONNECTION

FM FLOW METER

FOP FUEL OIL PUMP

FOR FUEL OIL RETURN

FOS FUEL OIL SUPPLY

FOV FUEL OIL VENT

FS FLOOR SINK

FS FLOW SWITCH

FU FIXTURE UNITS

GAL GALLON

GCO GRADE CLEANOUTS

GPD GALLONS PER DAY

GPH GALLONS PER HOUR

GPM GALLONS PER MINUTE

GPR GAS PRESSURE REGULATOR

GRS GAS REGULATOR STATION

GT GREASE TRAP

GVTR GAS VENT THROUGH ROOF

GWH GAS FIRED WATER HEATER

H&CW HOT AND COLD WATER

HB HOSE BIBB

HD HUB DRAIN

HEX HEAT EXCHANGER

HP HORSEPOWER

HS HAND SINK

HST HOT WATER STORAGE TANK (DOMESTIC)

HWB HOT WATER BOILER

HWCP HOT WATER CIRCULATING PUMP

HWP HOT WATER PUMP

HYD HYDRANT

ID INSIDE DIAMETER

IE INVERT ELEVATION

ICW INDUSTRIAL COLD WATER

IHW INDUSTRIAL HOT WATER

INV INVERT

IPC INTERNATIONAL PLUMBING CODE

IRW IRRIGATION WATER

IW INDIRECT WASTE

IWH INSTANTANEOUS WATER HEATER

IWR INDUSTRIAL WATER RETURN

IWS INDUSTRIAL WATER SUPPLY

KW KILOWATT

KWH KILOWATT-HOUR

L/S LITER PER SECOND

LA LABORATORY AIR

LAV LAVATORY

LBS/HR POUNDS PER HOUR

LCW LABORATORY COLD WATER

LHW LABORATORY HOT WATER

LNG LIQUID NATURAL GAS

LOX LIQUID OXYGEN

LV LABORATORY VACUUM

LW LOW WATER

M METER

MA MEDICAL AIR

MAV MANUAL AIR VENT

MBH 1000 BTUH

MED MEDICAL

MER MECHANICAL EQUIPMENT ROOM

MH MANHOLE

MOU MEMORANDUM OF UNDERSTANDING

MSB MOP SERVICE BASIN

MV MEDICAL VACUUM

N2 NITROGEN

N20 NITROUS OXIDE

NC NORMALLY CLOSED

NG NATURAL GAS

NIC NOT IN CONTRACT

NO NORMALLY OPEN

NOM. NOMINAL

NPW NON POTABLE WATER

NTS NOT TO SCALE

O2 OXYGEN

OC ON CENTER

OD OUTSIDE DIAMETER

OFD OVERFLOW DRAIN

OR OPERATING ROOM

OVFL OVERFLOW

PA PASCAL

PD PRESSURE DROP OR DIFFERENCE

PDI PLUMBING AND DRAINAGE INSTITUTE

PG PRESSURE GAGE

PP PLUMBING PUMP

PPM PARTS PER MILLION

PRS PRESSURE REDUCING STATION

PRV PRESSURE REDUCING VALVE

PSI POUNDS PER SQUARE INCH

PSIA POUNDS PER SQUARE INCH ATMOSPHERE

PSIG POUNDS PER SQUARE INCH GAGE

PTRV PRESSURE TEMPERATURE RELIEF VALVE

PW POTABLE WATER

RD ROOF DRAIN

RDL ROOF DRAIN LEADER

RL ROOF LEADER

RP RECIRCULATION PUMP

RO REVERSE OSMOSIS WATER

RWL RAIN WATER LEADER

SAN SANITARY SEWER

SMACNA SHEET METAL AND AIR CONDITIONING

CONTRACTORS NATIONAL ASSOCIATION

SCFM STANDARD CUBIC FOOT/MINUTE

SCW SOFTENED COLD WATER

SDMH STORM DRAIN MANHOLE

SMH SANITARY MANHOLE

SP SUMP PUMP

SPR SPRINKLER LINE

SQFT/SF SQUARE FEET

SS STAINLESS STEEL

ST STORAGE TANK

SW STORM WATER

TCV TEMPERATURE CONTROL VALVE

TD TEMPERATURE DIFFERENCE

TD TRENCH DRAIN

TDH TOTAL DYNAMIC HEAD

TEMP TEMPERATURE

TMV THERMOSTATIC MIXING VALVE

TP TRAP PRIMER

TSTAT THERMOSTAT

TWR TEMPERED WATER RETURN

TWS TEMPERED WATER SUPPLY

TYP TYPICAL

V VENT

VAC VACUUM

VB VACUUM BREAKER

VCO VACUUM CLEANER OUTLET

VP VACUUM PUMP

VS VENT STACK

VSD VARIABLE SPEED DRIVE

VTR VENT THROUGH ROOF

W WASTE

WC WATER CLOSET

WCO WALL CLEANOUT

WG WATER GAGE

WH WALL HYDRANT

WH WATER HEATER

WHA WATER HAMMER ARRESTER

WL WATER LINE

WM WATER METER

WPD WATER PRESSURE DROP

WS WASTE STACK

WSFU WATER SUPPLY FIXTURE UNITS

YCO YARD CLEANOUT

YH YARD HYDRANT

TYPICAL UNIT NO.

GENERAL DRAWING SYMBOLS

DETAIL NUMBER

DRAWING NUMBER WHERE DRAWN

SECTION LETTER

DRAWING NUMBER WHERE SHOWN

NATURAL GAS, BELOW GRADE

BUILDING NO. WHERE EQUIPMENT IS LOCATED.

EQUIPMENT ABBREVIATION (PUMP)

PUMP NO.3 IN BUILDING NO.26

DIRECTION OF PIPE PITCH (DOWN)

DOMESTIC COLD WATER, COLD WATER

DOMESTIC HOT WATER, HOT WATER

DOMESTIC HOT WATER RETURN

MEDICAL AIR

MEDICAL VACUUM

LABORATORY AIR

LABORATORY VACUUM

ORAL EVACUATION

INDUSTRIAL AIR

DRAIN

UNION

VENT (SANITARY)

SOIL, WASTE, OR SANITARY SEWER

SANITARY SEWER, BELOW GRADE

STORM WATER

STORM WATER, BELOW GRADE

SOFT WATER

FILTERED COLD WATER

DRINKING WATER SUPPLY

DRINKING WATER RETURN

TEMPERED WATER SUPPLY

TEMPERED WATER RETURN

NITROUS OXIDE

OXYGEN

NITROGEN

NATURAL GAS

FUEL OIL SUPPLY

GLOBE VALVE

FUEL OIL DISCHARGE

FUEL OIL VENT

FUEL OIL RETURN

BUTTERFLY VALVE

GENERAL PLUMBING SYMBOLS

DIRECTION OF FLOW

ANCHOR

REDUCER OR INCREASER

ECCENTRIC REDUCER

TOP CONNECTION, 45° OR 90°

THREE-WAY MODULATING CONTROL VALVE

BOTTOM CONNECTION, 45° OR 90°

SIDE CONNECTION

CAPPED OUTLET

RISE OR DROP IN PIPE

PIPE DOWN

PIPE UP

POINT OF CONNECTION BETWEEN

NEW AND EXISTING WORK

LIMIT OF DEMOLITION

INVERTED BUCKET TRAP SET

INCLUDING PIPING ACCESSORIES

FLOAT & THERMOSTATIC TRAP SET

INCLUDING PIPING ACCESSORIES

STRAINER

THERMOMETER

PRESSURE GAGE

FLOW ELEMENT

CLEAN OUT; FLOOR AND WALL

HOSE BIB

PLUMBING VALVE SYMBOLS

PLUMBING PIPING SYMBOLS

GATE VALVE

GATE VALVE WITH 3/4 " HOSE ADAPTER

CHECK VALVE

ANGLE GLOBE VALVE

BALL VALVE

MODULATING CONTROL VALVE

TWO POSITION CONTROL VALVE

THREE-WAY TWO POSITION CONTROL VALVE

PRESSURE REGULATING VALVE

AUTOMATIC FLOW CONTROL VALVE

PRESSURE RELIEF VALVE

MANUAL AIR VENT

TEST PLUG (PRESSURE/TEMPERATURE)

AUTOMATIC AIR VENT

P-105

A P-105

CO CO

1 2

KEY NOTE SYMBOL

MULTIPLE KEY NOTES

APPLYING TO THE SAME ITEM

FLEXIBLE CONNECTION

PLUG VALVE

PRESSURE REDUCING VALVE

DRAWING BLOCK OR DETAIL TITLE, TYPICAL

D D

SW SW

MA MA

MV MV

SAN SAN

FOV

DRAWING TITLE

SCALE: 1/8" = 1'-0"1

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE

VA MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

52847-RENOVATE A320 FOR

CANON ULTIMAX

PG-001

KWSR

PLUMBING ABBREVIATIONS, SYMBOLS

AND NOTES

A324

CONTROL

RISER #19

DOM. COLD &

HOT

WASTE

#37A

WASTE/VENT

#36A

A320

RADIOLOGY

A324

CONTROL

RISER #19

DOM. COLD &

HOT

WASTE

#37A

WASTE/VENT

#36A

A226

EXAM

A224

EXAM

120SF

A222

EXAM

on e ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE

VA MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

52847-RENOVATE A320 FOR

CANON ULTIMAX

P-101

KWSR

PLUMBING FLOOR PLANS

A320 PLUMBING DEMOLITION PLAN

SCALE: 1/4" = 1'-0"1

DRAWING KEYED NOTES:

EXISTING:

· REMOVE FIXTURE AND SINK.

NEW:

· INSTALL SINK AND FIXTURE AS SHOWN ON PLAN (SEE

SPECIFICATIONS).

· INSTALL NECESSARY DOMESTIC HOT AND COLD PIPING FOR NEW

FIXTURES, CONNECT TO RELOCATED RISER #19. COORDINATE WITH

GENERAL CONTRACTOR AND VAMC COR.

DRAWING GENERAL NOTES:

1. SCHEDULE ALL SHUTDOWNS REQUIRED WITH VAMC COR. SHUTDOWNS

SHALL NOT INTERFERE WITH FACILITY OPERATIONS. PROVIDE TEMPORARY

SYSTEMS DURING SHUTDOWNS AS REQUIRED.

2. MAINTAIN THE INTEGRITY OF ALL EXISTING EQUIPMENT AND SYSTEMS

LOCATED OUTSIDE THE WORK AREA AND INTERRUPTED BY ANY REMOVAL

OR NEW INSTALLATION WORK. PROVIDE ALL ADDITIONAL PIPING, FITTINGS,

ACCESSORIES, ETC. REQUIRED TO EXTEND AND RECONNECT ANY

REMAINING EQUIPMENT AND SYSTEMS.

3. VERIFY ALL INVERTS AND PIPING ROUTES PRIOR TO INSTALLATION.

PROVIDE ALL NECESSARY OFFSETS AND FITTINGS REQUIRED TO MAKE

SYSTEM OPERATIONAL.

4. PROVIDE ALL SLEEVES, CORE DRILLING, WATER AND SMOKE FIRE SEALING

OF PIPING PENETRATIONS THROUGH WALLS AND FLOORS AS REQUIRED.

COORDINATE WITH VAMC COR.

5. COORDINATE THE INSTALLATION OF ALL PLUMBING PIPING SLEEVE

LOCATIONS INSTALLED THROUGH OR WITHIN CONCRETE FLOORS OR

BLOCK WALLS WITH VAMC COR.

6. ALL PIPING WORK SHALL BE COORDINATED WITH ALL TRADES INVOLVED.

OFFSETS IN PIPING AROUND OBSTRUCTIONS SHALL BE PROVIDED AS

REQUIRED.

7. ACCESS DOORS FOR VALVES AND EQUIPMENT LOCATED IN CONCEALED

LOCATIONS WILL BE PROVIDED BY THE GENERAL TRADES. THE PLUMBING

TRADE SHALL BE RESPONSIBLE FOR THE SIZE AND LOCATION. COORDINATE

ALL WORK.

8. THE PLUMBING CONTRACTOR IS REQUIRED TO REMOVE ALL EXISTING DEAD

LEG PIPING WITHIN THE CONSTRUCTION LIMITS OF THIS PROJECT. THE

PLUMBING CONTRACTOR SHALL DEMOLISH ALL PIPING BACK TO THE

EXISTING MAINS.

9. MODIFY AND RELOCATE EXISTING LAY IN CEILING SYSTEM UTILITIES AND

ALL ABOVE CEILING UTILITIES AS NEEDED TO COORDINATE STRUCTURAL

STEEL INSTALLATION.

A320 PLUMBING PLAN

SCALE: 1/4" = 1'-0"2

2ND FLOOR PLUMBING PLAN

SCALE: 1/4" = 1'-0"3

ei gh th in ch o ne fo ot

F th re e in ch es o ne fo ot 6"

6" on e an d on e ha lf in ch es o ne fo ot on e in ch o ne fo ot

6" 6" th re e qu ar te rs in ch o ne fo ot on e ha lf in ch o ne fo ot th re e ei gh th s in ch o ne fo ot on e qu ar te r i nc h on e fo ot

VA FORM 08-6231

1 2 3 4 5 6 87 9

97 8654321

DRAWING TITLE PROJECT TITLE

LOCATION

DATE CHECKED DRAWN

DRAWING NUMBER

BUILDING NUMBER

PROJECT NUMBER

REVISION DATE

SYRACUSE

VA MEDICAL

CENTER

ENGINEERING

DEPARTMENT

ISSUED DATE

800 IRVING AVE. SYRACUSE, NY 13210

3/24/2021

GENERAL PROJECT INFORMATION

100% SPRINKLERED

DWG.

U.S. Department of Veterans Affairs

52847-CSI-712RENOVATE A320 FOR

CANON ULTIMAX

MG-001

KWAM

MECHANICAL ABBREVIATIONS,

SYMBOLS & NOTES

GENERAL PIPING SYMBOLS

A/E ARCHITECT / ENGINEER

AAD AUTOMATIC AIR DAMPER

AAV AUTOMATIC AIR VENT

AD ACCESS DOOR

AF AFTER FILTER

AFF ABOVE FINISHED FLOOR

AHU AIR-HANDLING UNIT

A.I. ANALOG INPUT

AMP AMPERAGE

A.O. ANALOG OUTPUT

AP ACCESS PANEL

APD AIR PRESSURE DROP

ASME AMERICAN SOCIETY OF MECHANICAL

ENGINEERS

AV AUTOMATIC VENT

AW AIR WASHER

BD BUTTERFLY DAMPER

BDD BACKDRAFT DAMPER

BFP BACKFLOW PREVENTER

BFT BOILER PLANT FIRE TUBE

BG BOTTOM GRILLE

BOD BOTTOM OF DUCT ELEVATION

BOD BASIS OF DESIGN

BOP BOTTOM OF PIPE ELEVATION

BTU BRITISH THERMAL UNIT

BTUH BRITISH THERMAL UNIT PER HOUR

CC COOLING COIL

CCD COOLING COIL CONDENSATE DRAIN

CD CEILING DIFFUSER

CD-1 CONSTRUCTION DOCUMENTS

(SUBMISSION1)

CD-2 CONSTRUCTION DOCUMENTS

(SUBMISSION2)

CFH CUBIC FEET PER HOUR

CFM CUBIC FEET PER MINUTE

CFT CUBIC FEET

CG CEILING GRILLE

CH CHILLER

CHP CHILLED WATER PUMP

CHW CHILLER WATER

CHR CHILLED WATER RETURN

CHS CHILLED WATER SUPPLY

CI CAST IRON

CO CLEAN OUT

CP CONDENSATE PUMP

CR CEILING REGISTER

CRAC COMPUTER ROOM AIR CONDITIONING

UNIT

CU CONDENSING UNIT

CW COLD WATER (POTABLE)

CWP CONDENSER WATER PUMP

CWR CONDENSER WATER RETURN (TO

COOLING TOWER)

CWS CONDENSER WATER SUPPLY

(FROM COOLING TOWER)

D DAMPER - AUTOMATIC

D-1 OUTDOOR AIR DAMPER

D-2 RETURN AIR DAMPER

D-3 RELIEF AIR DAMPER

DB DECIBELS

Db DRY-BULB TEMPERATURE

DDC DIRECT DIGITAL CONTROLS

DEG, ° DEGREE(S)

DF DIFFUSER

D.I. DIGITAL INPUT

DIA, Ø DIAMETER

D.O. DIGITAL OUTPUT

DOM DOMESTIC

DP DEW POINT TEMPERATURE

DPA DIFFERENTIAL PRESSURE ASSEMBLY

DPS DIFFERENTIAL PRESSURE SENSOR

DSS DUCTLESS SPLIT-SYSTEM (EVAPORATOR)

DX DIRECT EXPANSION

EA EXHAUST AIR

EA. EACH

EAT ENTERING AIR TEMPERATURE

E.C. ELECTRICAL CONTRACTOR

EER ENERGY EFFICIENCY RATIO

EF EXHAUST FAN

EG EXHAUST GRILLE

EH EXHAUST HOOD

EJ EXPANSION JOINT

ENT ENTERING

ER EXHAUST REGISTER

(ER) EXISTING TO REMAIN

ESP EXTERNAL STATIC PRESSURE

EWT ENTERING WATER TEMPERATURE

(E) EXISTING

EXH EXHAUST

F FAHRENHEIT

F&T FLOAT AND THERMOSTATIC

F/S DPR COMBINATION FIRE SMOKE DAMPER

FA FREE AREA

FC FLEXIBLE CONNECTION

FCU FAN COIL UNIT (4 PIPE)

FCUC FAN COIL UNIT COOLING ONLY

FCUH FAN COIL UNIT HEATING ONLY

FCW FORWARD CURVED WHEEL (FAN)

FD FLOOR DRAIN

FD FIRE DAMPER

FM FLOW METER

FPM FEET PER MINUTE

FPS FEET PER SECOND

FR FLOOR REGISTER

FS FLOW SWITCH

FSTAT FREEZESTAT

FT FEET

FT-LB FOOT-POUND

FTR FIN TUBE RADIATION

FV FACE VELOCITY

GA GAUGE

GAL GALLONS

G.C. GENERAL CONTRACTOR

GF/CI GOVERNMENT FURNISHED,

CONTRACTOR INSTALLED

GH GRAVITY HOOD

GPD GALLONS PER DAY

GPH GALLONS PER HOUR

GPM GALLONS PER MINUTE

GRR GLYCOL-WATER RUN AROUND RETURN

GRS GLYCOL-WATER RUN AROUND SUPPLY

GS GALVANIZED STEEL

H HUMIDIFIER

H&CW HOT & COLD WATER

HCP HEATING WATER CIRCULATING PUMP

HC HEATING COIL

HD HEAD

HD HOOD

HOA HAND/OFF/AUTOMATIC

HP HORSEPOWER

HRC HEAT RECOVERY COIL

HRD HEAT RECOVERY DEVICE

HRW HEAT RECOVERY WHEEL

HSTAT HUMIDISTAT

HVU HEATING AND VENTILATING UNIT

HW HOT WATER

HWC HOT WATER COIL

HWHC HOT WATER HEATING COIL

HWP HEATING HOT WATER PUMP

HWR HEATING HOT WATER RETURN

HWS HEATING HOT WATER SUPPLY

HWUH HOT WATER UNIT HEATER

HX HEAT EXCHANGER

HZ HERTZ

I/O INPUT/OUTPUT

IAQ INDOOR AIR QUALITY

ID INSIDE DIAMETER

IFB INTEGRAL FACE AND BYPASS

IN INCHES

IN HG INCHES OF MERCURY

IN WC INCH WATER COLUMN

IRH INFRARED HEATER

IS INSECT SCREEN

IU INDUCTION UNIT

IV INLET VANES

J (INTENTIONALLY LEFT BLANK)

kPa KILOPASCAL kW KILOWATT

L/s LITERS PER SECOND

LAT LEAVING AIR TEMPERATURE

LBS/HR POUNDS PER HOUR

LF LINEAR FOOT (FEET)

LH LATENT HEAT

LPR LOW PRESSURE RETURN (STEAM CONDENSATE)

LPRC LOW PRESSURE STEAM RETURN (CLEAN)

LPS LOW PRESSURE STEAM

LPSC LOW PRESSURE STEAM (CLEAN)

LTCP LOCAL TEMPERATURE CONTROL PANEL

LVG LEAVING

LVR LOUVER

LWT LEAVING WATER TEMPERATURE

MA MIXED AIR

MAU MAKE-UP AIR UNIT

MAX MAXIMUM

MB MIXING BOX

MBH 1000 BTUH

MCA MINIMUM BRANCH CIRCUIT AMPACITY

MD MOTORIZED DAMPER

MIN MINIMUM

MM, mm MILLIMETER

MOD MOTOR OPERATED DAMPER

MOV MOTOR OPERATED VALVE

MTD MEAN TEMPERATURE DIFFERENCE

MVD MANUAL VOLUME DAMPER

MV MANUAL VENT

MZ MULTI-ZONE

(N) NEW

NA NOT APPLICABLE

NC NORMALLY CLOSED

NO NORMALLY OPEN

NOM NOMINAL

NTS NOT TO SCALE

OA OUTSIDE AIR

OAD OUTSIDE AIR DAMPER

OAG OUTSIDE AIR GRILLE

OAI OUTSIDE AIR INTAKE

OD OUTSIDE DIAMETER

P PUMP

PA PASCAL

PC PUMPED CONDENSATE

PCF POUNDS PER CUBIC FOOT (FEET)

PD PRESSURE DROP

PG PRESSURE GAUGE

PHC PREHEAT COIL

PPM PARTS PER MILLION

PSI POUNDS PER SQUARE INCH

PSIA POUNDS PER SQUARE INCH – ABSOLUTE

PSIG POUNDS PER SQUARE INCH – GAUGE

PSV PRESSURE SAFETY VALVE

(R) RELOCATE/RELOCATED

R/E RETURN OR EXHAUST

RA RETURN AIR

RAT RETURN AIR TEMPERATURE

RCP RADIANT CEILING PANEL

REA RELIEF AIR

RF RETURN FAN

RG RETURN GRILLE

RH RELATIVE HUMIDITY

RHC REHEAT COIL

RLA RUN LOAD AMPERE

RO REVERSE OSMOSIS

RPM REVOLUTIONS PER MINUTE

RR RETURN REGISTER

RTU ROOF TOP UNIT

RV RELIEF VALVE

SA SUPPLY AIR

SAD SOUND ATTENUATOR DEVICE

SAT SUPPLY AIR TEMPERATURE

SCFM STANDARD CUBIC FEET PER MINUTE

SD SMOKE DETECTOR

SD SUPPLY AIR DIFFUSER

SDPR SMOKE DAMPER

SDR SMOKE DAMPER (RETURN)

SDS SMOKE DAMPER (SUPPLY)

SENS SENSIBLE HEAT

SF SUPPLY FAN

SG SUPPLY AIR GRILLE

SP STATIC PRESSURE

SP GR SPECIFIC GRAVITY

SPS STATIC PRESSURE SENSOR

SQ FT SQUARE FOOT (FEET)

SR SUPPLY AIR REGISTER

SS, SST STAINLESS STEEL

ST STEAM TRAP

SVS STEAM VENT SILENCER

T&PCV TEMPERATURE AND PRESSURE

CONTROL VALVE

TAB TESTING, ADJUSTING, BALANCE

TD TEMPERATURE DIFFERENCE

TDH TOTAL DYNAMIC HEAD

TG TRANSFER GRILLE

TP TRAP

TR TOP REGISTER

TSP TOTAL STATIC PRESSURE

TSTAT THERMOSTAT

TU TERMINAL UNIT

TYP TYPICAL

UC UNDER CUT

UL UNDERWRITERS LABORATORY

V VALVE

VAV VARIABLE AIR VOLUME

VB VACUUM BREAKER

VD VOLUME DAMPER (MANUAL OPPOSED BLADE)

VFD VARIABLE FREQUENCY DRIVE

VI VIBRATION ISOLATOR

VIV VARIABLE INLET VANES

VPS VARIABLE PRIMARY SYSTEM

VR VACUUM (STEAM CONDENSATE) RETURN

W WATTS

Wb WET-BULB (TEMPERATURE)

WC WATER COOLED

WCACU WATER-COOLED COMP RM A/C

WEF WALL EXHAUST FAN

WF WATER FILTER

WFCV WATER FLOW CONTROL VALVE

WFM WATER FLOW METER

WFMD WATER FLOW MEASURING DEVICE

WG WATER GAUGE

WHA WATER HAMMER ARRESTOR

1 2

GENERAL NOTES AND CONDITIONS

1. THESE DRAWINGS WERE PREPARED FROM INFORMATION TAKEN FROM THE AVAILABLE

BUILDING DRAWINGS, ARCHITECTURAL BACKGROUNDS PROVIDED AND FIELD SURVEY

INFORMATION COMPILED BY THE VA ENGINEERING DESIGN TEAM FOR THE PURPOSE OF

ENGINEERING DESIGN. EXISTING CONDITIONS ARE SHOWN AS ACCURATELY AS

POSSIBLE. THERE IS THE POSSIBILITY THAT CONDITIONS SHOWN ARE NOT EXACTLY AS

EXISTING. CONTRACTOR SHALL VERIFY ALL DIMENSIONS, ELEVATIONS, LOCATIONS,

SIZES AND CONDITIONS AT THE SITE AND REPORT ANY DISCREPANCIES TO THE

ENGINEER PRIOR TO BEGINNING INSTALLATION OR FABRICATION WORK.

1.1. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO REVIEW THE PLANS AND

SPECIFICATIONS, AS WELL AS ALL RELATED PROJECT PLANS AND SPECIFICATIONS

FROM OTHER DISCIPLINES, TO BECOME FAMILIAR WITH THE FULL PROJECT SCOPE

AND COORDINATED RESPONSIBILITIES.

1.2. SHOULD IT APPEAR THAT THE WORK INTENDED TO BE DESCRIBED OR RELATED

WORK ARE NOT SUFFICIENTLY DETAILED OR EXPLAINED ON THE DRAWINGS, OR IN

THE SPECIFICATIONS, CONSULT THE COR FOR NECESSARY CLARIFICATIONS, AND

CONFORM TO THOSE CLARIFICATIONS INSOFAR AS THEY ARE CONSISTENT WITH

THE ORIGINAL DRAWINGS AND SPECIFICATIONS. IN NO CASE SHALL WORK

PROCEED IN UNCERTAINTY.

1.3. EQUIPMENT ARRANGEMENTS ARE DESIGNED TO SHOW PREFERRED

CONFIGURATIONS TO SUIT KNOWN CONDITIONS. ACTUAL INSTALLATION BY

CONTRACTOR MAY BE ALTERED AS REQUIRED TO SUIT FIELD CONDITIONS

ENCOUNTERED DURING CONSTRUCTION WITHOUT COMPROMISING THE INTENT OF

THE ORIGINAL DESIGN. COORDINATE ANY MODIFICATIONS WITH THE COR PRIOR

TO STARTING WORK IN AREAS AFFECTED.

1.4. THE CONTRACTOR SHALL CHECK AND VERIFY ALL DIMENSIONS AND CONDITIONS

AT SITE PRIOR TO STARTING WORK.

1.5. DO NOT SCALE DRAWINGS.

2. THE CONTRACTOR WILL BE RESPONSIBLE FOR ENSURING THAT ALL RULES AND

REGULATIONS, INCLUDING THOSE WHICH MAY BE ISSUED BY THE OWNER, ARE BEING

OBSERVED, PARTICULARLY WORKPLACE SAFETY AND THE CONDUCT OF ALL THOSE

EMPLOYED DIRECTLY AND INDIRECTLY ON THE PREMISES, AND THE OWNER'S

EMPLOYEES WHO MAY BE IMPACTED OR AFFECTED BY CONSTRUCTION ACTIVITIES. THE

CONTRACTOR WILL INSTALL SIGNAGE, BARRIERS, AND OTHER MEANS TO PROVIDE

WARNING AND PERSONNEL SAFETY. PLACEMENT OF THESE ITEMS WILL BE

COORDINATED WITH THE OWNER AND HIS ONGOING OPERATIONS AND WILL PROMPTLY

BE REVISED WHEN WORK IN A PARTICULAR AREA HAS BEEN COMPLETED.

2.1. DURING PERFORMANCE OF WORK, THE CONTRACTOR SHALL BE RESPONSIBLE

FOR PROVISION AND MAINTENANCE OF WARNING SIGNS, LIGHT SIGNAL DEVICES,

GUARD LIGHTS, BARRICADES, GUARD RAILS, FENCES AND OTHER DEVICES,

APPROPRIATELY LOCATED ON AND AROUND THE JOB SITE WHICH GIVE PROPER

AND UNDERSTANDABLE WARNING TO PERSONS WITH REGARD TO HAZARDOUS

CONDITIONS, EQUIPMENT AND OPERATIONS BEING PERFORMED IN CONJUNCTION

WITH THE WORK.

3. THE CONTRACTOR SHALL BE RESPONSIBLE TO COORDINATE WITH OTHER TRADES FOR

ITEMS IN THEIR SCOPE OF WORK WHICH COULD REQUIRE ADDITIONAL

MECHANICAL/PLUMBING WORK, AND ITEMS THAT ARE NOT INDICATED ON THE

DRAWINGS.

4. THIS INSTALLATION WILL CONFORM TO ALL CODES AND THE REQUIREMENTS OF

FEDERAL, STATE, AND LOCAL REGULATORY AGENCIES HAVING JURISDICTION. IN

PARTICULAR, THE WORK WILL BE IN ACCORDANCE WITH THE CURRENT ADOPTED

EDITION OF THE NEW YORK STATE UNIFORM FIRE PROTECTION AND BUILDING CODE

AND ALL OF ITS APPLICABLE SUBCODES AND AMENDMENTS.

5. ALL WORK WILL BE LAWFULLY EXECUTED IN A NEAT AND WORKMANLIKE MANNER AND

WILL BE COMPLETED IN ACCORDANCE WITH THE GOVERNING CODES (ABOVE),

INDUSTRY STANDARDS, AND IN CONFORMANCE WITH THE MANUFACTURERS

RECOMM…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated May 5, 2021.