J. Napier SOW.pdf

PDF 403 KB Posted

Download PDF, 403 KB

Attached to
52000QR270000530- CGC Joseph Napier Waterborne Hull Inspection, Cleaning & Anode Zinc Renewal
Solicitation number
52000QR270000530
Issued by
Not on record

About this file

This is a Statement of Work (SOW) for cleaning, inspecting, and videoing underwater body surfaces on the USCG Cutter Joseph Napier (Hull 1115), with optional renewal of failed zinc anodes. The work is to be performed pier-side at 5 Calle La Puntilla, San Juan, Puerto Rico 00901, during the period of December 7-11, 2026, with final scheduling confirmed with the Vessel Point of Contact, EMC Andrew Buckner (571-608-6121, Andrew.N.Buckner@uscg.mil). The contractor must ensure all personnel possess valid DHS REAL ID-compliant identification for base access, and failure to comply may result in performance delays that will not constitute excusable delays.

The definite work includes submitting pre- and post-cleaning video highlights of underwater body surfaces, cleaning all underwater body surfaces free of marine growth and contaminants in accordance with 29 CFR 1910.1910, ensuring transducers are cleaned only with handheld brushes without power attachments, protecting existing coating systems from damage, polishing propellers, and submitting a written service report. The optional/conditional work involves renewing government-furnished zinc anodes (including stern tube, sea chest grate, propeller, and bow thruster anodes) pending inspection results and change request authorization, with anodes potentially requiring minor modifications for proper fit. The SOW references compliance with Commercial Diving Operations regulations and accomplishes Maintenance Planning Code (MPC) B10015.D and potentially B10018.D.

View the file

On GovTribe

Work with this file

  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

87WPB & 154WPC 11101 PBPL 28AUG26 Page 1 of 2

Clean/Inspect/Video Underwater (U/W) Body Surfaces (renew failed zinc anodes)

1. SCOPE

1.1 Intent: While the vessel is moored pier side, clean the vessel’s U/W body and (pending inspection) renew bolt-on zinc anodes (if needed).

CUTTER CGC JOSEPH NAPIER (1115)

ADDRESS 5 Calle La Puntilla, San Juan, P.R. 00901

Period of Performance (POP) 12/7/2026-12/11/2026.

Final scheduling shall be confirmed with the Vessel POC.

CUTTER POC POC: EMC Andrew Buckner Cell: 571-608-6121 Email: Andrew.N.Buckner@uscg.mil

Security Requirements All contractor personnel requiring access to the place of performance in order to perform work under this contract must possess a valid-state issued REAL ID-compliant driver’s license or identification card, or an acceptable alternative form of identification as defined by the Department of Homeland Security (DHS) [https://www.dhs.gov/real-id]. It is the contractor’s responsibility to ensure that all personnel are properly credentialed to gain base access. Failure to comply with access requirements may result in delays to performance and will not constitute an excusable delay.

1.2 Government-furnished property.

MTI ITEM DESCRIPTION NSN/PN QTY

N Anode, stern tube P/N: Z0020202H3

NIIN: 016445483

28 ea.

N Nut, Self-Locking P/N: 90715A145

NIIN: 015085774

2 Bx *24 in a bx

N Anode, Sea Chest Grate P/N: GA-4

NIIN: 016476179

4 ea.

N Screw, Prop zinc plate P/N: 950756

NIIN: 016340210

8 ea.

N Screw, Sea Chest Grate Anode, P/N: 93190A634

NIIN: 016197182

4 ea.

N Screw Cap, Stern Tube Covers

P/N: 90585A626

NIIN: 016161107

42 ea.

N Zinc plate, propeller P/N: 950733

NIIN: 016278941

2 ea.

N Anode, Bow Thruster, Gear Case, Bolt On

P/N: 1081226

NIIN: 123561870

1 ea.

87WPB & 154WPC 11101 PBPL 28AUG26 Page 2 of 2

N Anode, Bow Thruster, Tunnel, Bolt On

P/N: CM2000Z

NIIN: 200126334

12 ea.

2. REFERENCES

COAST GUARD DRAWINGS

None

COAST GUARD PUBLICATIONS

None

OTHER REFERENCES

Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 7/16/2026, Commercial Diving Operations

3. REQUIREMENTS

This SOW accomplishes MPC B10015.D and potentially B10018.D.

3.1 DEFINITE WORK. The Contractor must:

3.1.1 SUBMIT A PRE AND POST CLEANING VIDEO. Submit before cleaning and after cleaning video highlights of underwater body surfaces (e.g. bow thruster, propellers, rudders, transducers, heavily fouled hull areas, etc.).

3.1.2 CLEAN AND INSPECT UNDERWATER BODY SURFACES. Clean the U/W body surfaces free of all marine growth, debris, and all other surface contaminants in accordance with 29 CFR 1910.

Remove and replace sea chest grating if necessary to access/clean sea chest suction. Ensure all transducer surfaces are cleaned with only handheld brushes, without the use of power attachments. Ensure that the existing U/W body coating system or non-coated surfaces do not incur any damage during cleaning process. Polish propellers.

3.1.3 SUBMIT FINAL REPORT. A written service report must be provided detailing the services accomplished.

3.2 OPTIONAL/CONDITIONAL WORK.

3.2.1 RENEW ANODES. Pending inspection results and release of a CR, renew Government-furnished components listed below paragraph 1.2. Anodes may require slight modification to ensure proper fit (e.g., trimming metal tabs, drilling tab bolt holes, etc.).

File details come from the government source that posted it. Updated .