REVISED CGC RELIANCE Flex Couplings SOW (001).pdf

PDF 60 KB Posted

Attached to
FLEXIBLE RUBBER PIPE COUPLINGS
Solicitation number
52000QR2700000374
Issued by
Not on record

About this file

This is a Statement of Work (SOW) for the U.S. Coast Guard to procure ship check services, fabrication, and delivery of twenty-four flexible rubber pipe couplings (expansion joints) for USCGC RELIANCE (WMEC-615).

The contractor must conduct an on-site ship check at NAS Pensacola, Florida, between October 23 and November 16, 2026, to visually inspect twenty-four target coupling locations and perform accurate engineering measurements including face-to-face dimensions, flange drilling patterns, allowable movement, clearances, and piping alignment. All personnel must be U.S. Citizens with valid REAL ID or passport for base access. The couplings must be American-made with neoprene outer covers (weather, oil, and ozone resistant) and nitrile-butadiene inner tubes (oil, fuel, and seawater resistant), reinforced with high-tensile synthetic fabric rated for system operating parameters. The required couplings include two sets for Main Diesel Engines (crankcase exhaust, raw water, lube oil, and jacket water couplings) and two sets for Ship Service Diesel Generators (jacket water couplings only), totaling 24 units. Delivery shall be FOB Destination on or before April 12, 2027, to CWO Nicholas Labianca, Port Engineer, at NAS Pensacola, 211 South Ave Suite G, Pensacola, FL 32508. Items must be packaged to prevent deformation, mechanical damage, UV exposure, and moisture intrusion. Government points of contact include LT Megan Wadleigh (Engineer Officer), LTJG Ethan Ashurst (Project Manager), and CWO Nicholas Labianca (Port Engineer/Contracting Officer Representative).

View the file

Other files

File Type Posted
374 FAR clauses and provisions matrix.pdf PDF
REVISED CGC RELIANCE Flex Couplings SOW (001).docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK (SOW)

USCGC RELIANCE (WMEC-615)

SHIP CHECK, FABRICATION, AND DELIVERY OF FLEXIBLE RUBBER PIPE COUPLINGS

1.0 SCOPE OF WORK

The Contractor shall furnish all necessary labor, travel, tools, materials, equipment, and quality assurance necessary to conduct an on-site ship check, perform accurate engineering measurements, fabricate, and deliver twenty-four (24) flexible rubber pipe couplings (expansion joints). All manufactured couplings will be received by the U.S. Coast Guard and subsequently provided as Government Furnished Property (GFP) for an upcoming Dockside (DS) maintenance availability.

2.0 PERFORMANCE REQUIREMENTS

2.1 Ship Check and Field Measurements

2.1.1 Location: CGC RELIANCE Homeport: NAS Pensacola 211 South Ave Suite G Pensacola, FL 32508

2.1.2 Availability Window: The vessel will be available for ship check between October 23, 2026, and November 16, 2026. The Contractor shall coordinate exact site visit dates with the Engineering Officer (EO).

2.1.3 Security & Site Access: All personnel visiting the vessel shall be U.S. Citizens and must comply with base access control requirements (REAL ID or valid passport required).

2.1.4 Responsibilities: The Contractor shall visually inspect each of the twenty-four (24) target locations, verify face-to-face dimensions, flange drilling patterns, allowable lateral/axial movement, adjacent clearances, and piping alignment.

2.2 Fabrication & Material Requirements

2.2.1 Domestic Sourcing: All finished couplings must be American Made.

2.2.2 Elastomer Construction:

- Outer Cover: Neoprene (weather, oil, and ozone resistant).

- Tube / Inner Sleeve: Nitrile-Butadiene (BUNA-N) (oil, fuel, and seawater resistant).

- Reinforcement: High-tensile synthetic fabric / carcass cord rated for system operating parameters.

2.2.3 Coupling list:

#1 Main Diesel Engine (MDE)

- 01 each Crankcase exhaust Flex Coupling

- 02 each Raw Water Flex Couplings

- 03 each Lube Oil Flex Couplings

- 04 each Jacket Water Flex Couplings

#2 Main Diesel Engine (MDE)

- 01 each Crankcase exhaust Flex Coupling

- 02 each Raw Water Flex Couplings

- 03 each Lube Oil Flex Couplings

- 04 each Jacket Water Flex Couplings

#1 Ship Service Diesel Generator (SSDG)

- 02 each Jacket Water Flex Couplings

#2 Ship Service Diesel Generator (SSDG)

- 02 each Jacket Water Flex Couplings

TOTAL: 24 Flex Couplings

3.0 PACKAGING AND DELIVERY

3.1 Terms: Delivery shall be FOB Destination.

3.2 Delivery Date: On or before April 12, 2027.

3.3 Delivery Address:

USCGC RELIANCE (WMEC-615)

Attn: CWO Nicholas Labianca Port Engineer

NAS Pensacola

211 South AVE Suite G

Pensacola, FL 32508.

3.4 Packaging: Items shall be packaged to prevent deformation, mechanical damage, UV exposure, and moisture intrusion during transit and subsequent warehouse storage.

4.0 GOVERNMENT POINTS OF CONTACT (POCs)

4.1 CGC RELIANCE POC: LT Megan Wadleigh

Role/Title: Engineer Officer (EO)

Email: Megan.A.Wadleigh@uscg.mil

Phone: (650) 421-5806

4.2 SFLC-MECPL POC: LTJG Ethan Ashurst

Role/Title: Project Manager

Email: Ethan.J.Ashurst@uscg.mil

Phone: (561) 239-9125

4.3 Port Engineer (PE) / Contracting Officer Representative (COR): CWO Nicholas Labianca

Role/Title: PE/COR

Email: Nicholas.F.Labianca@uscg.mil

Phone: (571) 608-9794

File details come from the government source that posted it. Updated .