52000PR260024470_SOW MK75 CHANGE OUT CGC THETIS_MAY26.doc
DOC document 52 KB Posted
- Attached to
- 52000QR260024470 USCGC THETIS CRANE OPS
- Solicitation number
- 52000QR260024470
About this file
This is a Statement of Work (SOW) for mobile crane services related to the removal and installation of equipment aboard the USCGC THETIS (WMEC-910), a 270-foot Medium Endurance Coast Guard Cutter located at CG Sector Key West, Florida, Berth D1. The contractor must provide crane and rigging services to safely remove and load equipment for transport, with work scheduled over two days: May 7, 2026 (Thursday, 0800-1600 hours) for equipment staging and May 12, 2026 (Tuesday, 0800-1600 hours) for equipment removal and loading. The primary lift involves removal of the MK75 Gun Mount (20,000 lbs mounted centerline at frame 32, approximately 19 feet high with the bow 43 feet from center) and the MK53 Combined Antenna System (1,200 lbs mounted atop the pilot house approximately 60 feet high). The contractor must lift loads across the approximately 38-foot beam from a delivery truck on the pier approximately 28 feet above the waterline to the ship's centerline and back. Maximum combined lift capacity required is approximately 35,000 lbs including the fixture, gun system, and transportation stand.
The contractor is responsible for furnishing all personal protective equipment for workers, installing protective coverings to seal off and protect non-affected vessel components against contamination, and removing all protective measures upon completion while inspecting for and cleaning any contamination. The contractor shall handle all interferences in accordance with SFLC Standard Specification 0000, paragraph 3.3.5. Coast Guard personnel will operate all shipboard machinery and equipment. This procurement is issued as Request for Quote 52000QR260024470 under FAR Part 12 for commercial items, processed as a small business set-aside with firm-fixed pricing using simplified acquisition procedures. The related solicitation number is 52000QR260024470, and the work is associated with PR 52000PR260024470.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FAR Matrix2026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WORK ITEM 1: MK75 GUN MOUNT REMOVAL AND INSTALLATION #PR 52000PR260024470
1. SCOPE
1.1 Intent. This work item describes the requirements for the contractor to provide mobile crane services for the removal and installation of Coast Guard / NAVY equipment from CGC THETIS (WMEC-910) at, CG SECTOR Key West, FL pier D1 as requested and directed by on-scene Coast Guard personnel.
1.2 Government-furnished property.
None
2. REFERENCES
Coast Guard Drawings
None
Coast Guard Publications
Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General Requirements
Other References
None
3. REQUIREMENTS
3.1 General. Contractor must be able to safely and securely setup in front of (bow) a 270 foot Medium Endurance Coast Guard Cutter (WMEC-910/ CGC THETIS) located at Sector Key West, FL and be able to lift ~ 35000 lbs across the beam of the ship from delivery truck located on the pier ~28 feet above water line to center line of ship and back again, and provide crane and rigging services to onboard Coast Guard personnel.
REACH REQUIREMENTS:
· MK75 Gun Mount(20,000lbs) is mounted centerline of the cutter approximately 19 feet mounted at frame 32.
· Bow to center of gun is 43 feet. Fenders are of various sizes 3-6 feet.
· Beam of ship is approximately 38 feet wide.
· Clearance above water line is ~28 feet over stanchions and guard rails.
· MK53 Combined Antenna System(1200lbs) is mounted centerline atop the pilot house ~60 feet high The contractor shall be on scene and ready to commence work at 0800 based on the following 2 day schedule:
07May26 - Thursday: (0800-1600) 8 hours
1. Removal of Government Furnished Equipment from contracted transportation and placed in the staging area.
12May26 - Tuesday: (0800-1600) 8 hours
1. Removal of MK75 Gun Weapon System and MK53 Combined Antenna System-No installation/replacement of equipment
2. MK75 Gun Weapon System: Request crane service for MK75 lift(20,000lbs with lifting fixture).
3. MK53 Combined Antenna System: Request base crane 0800-1600
4. Assorted lifting of equipment to facilitate over the road transportation. Max lift ~35, 000lbs Fixture, Gun system, and Transportation Stand
5. Load contracted truck with MK75 gun mount, MK53 radar system, and required Special Tools and Equipment(STE) The requirements are to arrive on time daily and to set up where directed pier side of CGC THETIS (WMEC-910) at Sector Key West, BERTH (D1).
The highest loads are from the ship’s 03 deck, requiring the lifting of the ship’s fire control radar (behind the pilot house) and to lowered to the pier.
3.1.1 CIR.
None.
3.1.2 Tech Rep.
Not applicable.
3.1.3 Protective measures. The contractor shall furnish and utilize all personal protective equipment for contract workers in the vicinity of crane operations. The contractor shall furnish and install all protective coverings to seal off and protect all non-affected vessel's components, equipment, and spaces near the work area against contamination during the performance of work. Upon completion of work, the contractor shall remove all installed protective measures, inspect for the presence of contamination, and return all contaminated equipment, components, and spaces to original condition of cleanliness.
3.1.4 Interferences. The contractor shall handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences).
3.2 Clean and inspect.
Not applicable.
3.3.1 Wipe up all excess grease.
4. NOTES
NOTE
Coast Guard personnel will operate all shipboard machinery and equipment.
File details come from the government source that posted it. Updated .