51501376 SS_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k)

Ref: FAR 13.106(b)

The service or material listed on Document number: 51501376 & 51501377 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Globe Composites

Manufacturer POC & Phone Nr: Walter Foxworth, (781) 871-3700 ex (211)

Mfr. Address: 254 Beech Street, Rockland, MA 02370-0183

Manufacturers Dealer/Rep: Walter Foxworth

Dealer/Rep Address/Phone Number: 254 Beech Street, Rockland, MA 02370-0183, (781)

871-3700 ex (211)

Description of the item or service required, the estimated cost, and required delivery date.

Manufacture (1 set of 16 Impulse Tank diffuser block plug #1 and 20 Impulse Tank diffuser block plug #2) Detail Section 8-5A, FN-20 & 21 of drawing 6406574

Rev-C. Estimated Total Cost is . It can be delivered by 1/11/2027.

Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

These are the only diffuser plugs that meet form, fit, and function. No other manufacturer has been identified or qualified to manufacture these plugs. Globe Composites is the NAVSEA

APPROVED Original Equipment Manufacturer (OEM) for these specific diffuser block plugs required to be manufactured per the classified formula / spec noted in NAVSEA DWG 6406574

Rev-C. Diffuser plugs NEEDED are FN-20 & FN-21, Detail Section 8-5A, drawing 6406574 Rev-C

The requested material or service represents the minimum requirements of the Government.

FN-20 & FN-21, Detail Section 8-5A, Drawing 6406574 Rev-C, to classified formula / spec noted in DWG 6406574 Rev-C

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

These are the only diffuser plugs that meet form, fit, and function. No other manufacturer has been identified or qualified to manufacture these plugs. Globe Composites is the NAVSEA

APPROVED Original Equipment Manufacturer (OEM) for these specific Baffle Panels needed per the classified formula / spec noted in NAVSEA DWG 6406574 Rev-C. Diffuser plugs NEEDED are

FN-20 & FN-21, Detail Section 8-5A, drawing 6406574 Rev-C

A patent, copyright, or proprietary data limits competition. The proprietary data is:

These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

Globe Composites is the NAVSEA APPROVED

Original Equipment Manufacturer (OEM)

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT

TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT

THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature Date _________________

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018