50803036 ALL CDRLS.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Please DO NOT RETURN your form to either of these address. Send completed form to the Government issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP ___(DRPR)______ TM ____________________ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM

CONSTRUCTION DRAWINGS/PROCEDURES 3. SUBTITLE

Pre-Award NDT Procedure

4. AUTHORITY (Data Acquisition Document No.)

DI-DRPR-80651

5. CONTRACT REFERENCE

Per Contract

6. REQUIRING OFFICE

PSNS&IMF C2370

7. DD 250 REQ

N/A

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

OTIME

12. DATE OF FIRST

SUBMISSION

SEE BLOCK 16

14. DISTRIBUTION

See Block 16

b. COPIES

8. APP CODE

A

D 11. AS OF DATE

SEE BLOCK 16

13. DATE OF SUBSEQUENT

SUBMISSION

A. ADDRESSEE

Final

N/A Draft Reg Repr

16. REMARKS

BLOCK 3:

PRIOR TO CONTRACT AWARD THE VENDOR SHALL PROVIDE:

Copy of written NDT procedure qualified to meet the requirements of NAVSEA Technical Publication T9074-AS-GIB-010/271 (Revision 1); Requirements for Non-destructive Test Method (TP 271 REV 1).

The Qualified Plan shall:

a) Be a written procedure developed, maintained, and qualified to meet the requirements of TP 271 (Rev 1) for each method performed,

b) Certify that each applicable Non-destructive Test (NDT) procedure included in the procedure is in accordance with the requirements of reference TP 271 (Rev 1). The certification statement for compliance with TP 271 (Rev 1) needs to be included as part of the written procedure used for performing the NDT and must be signed by the cognizant examiner of the activity (contractor). The cognizant examiner must be equivalent to a Level III in

ASNT SNT-TC-1A,

c) Be based on use of acceptance criteria of MIL-STD-2035A; Nondestructive Testing Acceptance Criteria for NDT’s performed in accordance with Qualified Plan.

Note: The Disposal Containers associated with this contract require Magnetic Particle Tests (MTs). The NDT plan must include MTs

BLOCK 8: PRE AWARD NDT PROCEDURE SHALL BE SUBMITTED TO

GOVERNMENT REPRESENTATIVE FOR REVIEW AND APPROVAL TO VERIFY

CONTRACT REQUIREMENTS ARE MET. APPROVAL WILL BE BASED ON

TECHNICAL CONTENT AND COMPLIANCE WITH REQUIREMENTS. THE

GOVERNMENT WILL HAVE 7 CALENDAR DAYS FOR REVIEW. THE CONTRACTOR

SHALL HAVE 7 CALENDAR DAYS TO REVISE (IF REQUIRED) AND RESUBMIT FOR

A NEW REVIEW.

BLOCK 11 & 12: PRE-AWARD NDT PROCEDURE SHALL BE PROVIDED TO THE

GOVERNMENT POC PRIOR TO THE AWARD OF THE CONTRACT.

BLOCK 14: THE CONTRACTOR SHALL PROVIDE ONE (1) ELECTRONIC COPY OF

THE SCHEMATIC.

BLOCK 14: MEDIA REQUIREMENTS: EQUIPMENT DESIGN SHALL BE DELIVERED

IN UNPROTECTED SEARCHABLE PDF FORMAT.

Doc # 5080-3036

PSNS C/2370 0 1 0

TOTAL 0 1 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

/S/ M. Shamion C/2370 APR 10 2025 /S/ D. Francis C/900F.32

APR 10 2025

DD Form 1423-1, FEB 2001 previous edition may be used. Page 1 of 2 Pages

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

0002AA A

A001

PRE CONTRACT SOLICITATION

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Please DO NOT RETURN your form to either of these address. Send completed form to the Government issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP ___(DRPR)______ TM ____________________ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM

CONSTRUCTION DRAWINGS/PROCEDURES 3. SUBTITLE

Pre-Award QA/QC Practices

4. AUTHORITY (Data Acquisition Document No.)

DI-DRPR-80651

5. CONTRACT REFERENCE

Per Contract

6. REQUIRING OFFICE

PURCHASING ACTIVITY

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

OTIME

12. DATE OF FIRST

SUBMISSION

SEE BLOCK 16

14. DISTRIBUTION

See Block 16

b. COPIES

8. APP CODE

A

D* 11. AS OF DATE

SEE BLOCK 16

13. DATE OF SUBSEQUENT

SUBMISSION

A. ADDRESSEE

Final

N/A Draft Reg Repr

16. REMARKS

BLOCK 3:

PRIOR TO CONTRACT AWARD THE VENDOR SHALL PROVIDE:

Copy of written Quality Assurance (QA) and/or Quality Control (QC) practices. QA and/or QC Plan(s) shall reflect contractor’s methods for monitoring and controlling operations, material controls, inspection, and non-conformance procedures, qualifications of personnel that will be performing welding and inspection work of contract associated with American Welding Society AWS D1.1, qualifications of inspectors and NDT technicians that will be supporting work of contract, NDT procedures and equipment calibration records for equipment used in support of the contract.

BLOCK 8: PRE AWARD QA/QC PRACTICES SHALL BE SUBMITTED TO

GOVERNMENT REPRESENTATIVE FOR REVIEW AND APPROVAL TO VERIFY

CONTRACT REQUIREMENTS ARE MET. APPROVAL WILL BE BASED ON

TECHNICAL CONTENT AND COMPLIANCE WITH REQUIREMENTS. THE

GOVERNMENT WILL HAVE 7 CALENDAR DAYS FOR REVIEW. THE CONTRACTOR

SHALL HAVE 7 CALENDAR DAYS TO REVISE (IF REQUIRED) AND RESUBMIT FOR

A NEW REVIEW.

BLOCK 11 & 12: PRE-AWARD QA/QC PRACTICES SHALL BE PROVIDED TO THE

GOVERNMENT POC PRIOR TO THE AWARD OF THE CONTRACT.

BLOCK 14: THE CONTRACTOR SHALL PROVIDE ONE (1) ELECTRONIC COPY OF

THE SCHEMATIC.

BLOCK 14: MEDIA REQUIREMENTS: EQUIPMENT DESIGN SHALL BE DELIVERED

IN UNPROTECTED SEARCHABLE PDF FORMAT.

Doc # 5080-3036

PSNS C/2370 0 1 0

TOTAL 0 1 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

/S/ M. Shamion C/2370 APR 10 2025 /S/ D. Francis C/900F.32

APR 10 2025

DD Form 1423-1, FEB 2001 previous edition may be used. Page 1 of 2 Pages

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

0002AB B

B001

PRE CONTRACT SOLICITATION

DATA ITEM DESCRIPTION

Title: Engineering Drawings Number: DI-DRPR-80651 Approval Date: 880718 AMSC Number: N4494 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: N/SEA 55Z3 Applicable Forms: N/A Distribution Statement A: Approved for public release, distribution is unlimited.

Description/Purpose: The Engineering Drawings are the documentation necessary to satisfy the Government’s requirements of acceptance.

Application/Interrelationship: This Data Item Description (DID) contains the format and content preparation instructions for engineering drawings generated by the specific and discrete task requirement as delineated in the contract. The applicable specification containing the technical content for the engineering drawings shall be stated in Block 16 of the DD Form 1423, Contract Data Requirements List.

Preparation Instructions:

1 Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2 General Content and Format. Engineering Drawings and Associated Lists shall meet the requirements of DOD-D-1000 and as defined on the DD Form 1423, Contract Data Requirements List, in accordance with the Ordering Data (paragraph 6.2) of DOD-D-1000, as attached or included in the contract or order.

3 Technical Content. Technical content shall be in accordance with the Appendix entitled “Engineering Drawings Technical Content Requirements” contained in the applicable military specification as stated in the DD Form 1423, Contract Data Requirements List.

DATA ITEM DESCRIPTION

Title: Engineering Drawings Number: DI-DRPR-80651 Approval Date: 880718 AMSC Number: N4494 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: N/SEA 55Z3 Applicable Forms: N/A Distribution Statement A: Approved for public release, distribution is unlimited.

Description/Purpose: The Engineering Drawings are the documentation necessary to satisfy the Government’s requirements of acceptance.

Application/Interrelationship: This Data Item Description (DID) contains the format and content preparation instructions for engineering drawings generated by the specific and discrete task requirement as delineated in the contract. The applicable specification containing the technical content for the engineering drawings shall be stated in Block 16 of the DD Form 1423, Contract Data Requirements List.

Preparation Instructions:

1 Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2 General Content and Format. Engineering Drawings and Associated Lists shall meet the requirements of DOD-D-1000 and as defined on the DD Form 1423, Contract Data Requirements List, in accordance with the Ordering Data (paragraph 6.2) of DOD-D-1000, as attached or included in the contract or order.

3 Technical Content. Technical content shall be in accordance with the Appendix entitled “Engineering Drawings Technical Content Requirements” contained in the applicable military specification as stated in the DD Form 1423, Contract Data Requirements List.