5038ZN01 Attachment (1) PC 1.docx
DOCX document 23 KB Posted
- Attached to
- Shielding Federal contract opportunity
- Solicitation number
- N4215825QE031
About this file
This fabrication details document outlines specifications for tungsten impregnated polymer shielding components for the Department of the Navy Naval Sea Systems Command. The requirement is for 3 units of shielding material composed of a homogenous matrix of tungsten powder and silicone rubber, containing approximately 90% tungsten by weight. The shielding must meet specific density requirements of 7 g/cc minimum and a tenth value thickness equal to or better than 2.09 inches.
The material must be non-yellow in color and meet strict quality standards for detrimental materials, including maximum limits for bromides, chlorides, fluorides, sulfur (250 PPM leachable each), and mercury (10 PPM). Certified test reports are required to verify material properties, and the shielding must be free from defects. Shipping requirements specify palletized packaging with maximum loaded weight of 3000 pounds per pallet, with partial shipments permitted.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FAR 52.212-2 Attachment (A).pdf | ||
| 5038ZN04 Attachment (3).docx | DOCX document | |
| 5038ZN02 Attachment (3).docx | DOCX document | |
| Solicitation N4215825QE031.pdf | ||
| 5038ZN04 Attachment (1) PC 4.docx | DOCX document | |
| 5038ZN01 Attachment (3).docx | DOCX document | |
| Drawings.pdf | ||
| 5038ZN05 Attachment (1) PC 5.docx | DOCX document | |
| 5038ZN02 Attachment (1) PC 2.docx | DOCX document | |
| 5038ZN03 Attachment (1) PC 3.docx | DOCX document | |
| 5038ZN05 Attachment (3).docx | DOCX document | |
| 5038ZN03 Attachment (3).docx | DOCX document |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT (1) FABRICATION DETAILS DOCUMENT NUMBER 5038ZN01
DESCRIPTION: SHIELDING, TUNGSTEN IMPREGNATED POLYMER, PC 1 OF DWG 2370.2-3655.
ORDERING DATA:
A. Fabricated using materials and instructions listed below.
B. Materials: see Tables 1 and 2.
C. Color and Marking Requirements: Shielding product must be non-yellow color. Labeling is not required.
D. QUANTITY: 3 EACH
TABLE 1 MATERIAL DESCRIPTION
| ITEM No. |
| DESCRIPTION |
| SPEC |
Tungsten shielding: homogenous matrix of tungsten powder and silicone rubber.
Approximately 90 percent tungsten by weight.
See Table 2
TABLE 2
TUNGSTEN SHIELDING ATTRIBUTES
| ATTRIBUTE |
| VALUE |
| (1) | THICKNESS |
| PER PC 1 OF DWG 2370.2-3655 |
| (2) | DENSITY |
| 7 G/CC MINIMUM |
| (3) | TVL – TENTH VALUE THICKNESS |
| EQUAL TO 2.09” OR BETTER |
E. Testing for detrimental materials is required. Quantitative test reports shall be provided as evidence that all materials used have been tested in accordance with Appendix A, Section A.6 of MIL-STD-2041 Rev E, Notice 1 Control of Detrimental Materials, and that the materials do not exceed the following limits:
BROMIDES 250 PPM (LEACHABLE)* CHLORIDES 250 PPM (LEACHABLE)* FLUORIDES 250 PPM (LEACHABLE)* SULFUR 250 PPM (LEACHABLE)* MERCURY SHALL NOT EXCEED 10 PPM
*At the option of the vendor, total levels of each halogen and sulfur may be determined in lieu of water-leachable levels per MIL-STD-2041 Rev E, Notice 1.
If the materials have been satisfactorily tested within the last four years, a copy of those test reports and a statement by the manufacturer that there has been no changes in the formulation or manufacturing process shall be submitted and is acceptable in lieu of performing additional detrimental material analyses.
F. Shielding shall be clean, well finished and free from foreign matter, cracks, holes, or other defects that may affect appearance or serviceability.
G. Shielding shall be appropriately palletized and packaged to provide adequate protection for shipping and storing. Each shipping pallet shall have a maximum loaded weight of not more than 3000 pounds. The loaded pallet shall comply with all D.O.T. Safety regulations. Partial shipments are acceptable.
H. Vendor shall provide Certified Test Reports that provide quantitative data to verify that the materials provided meet the requirements of Table (2), Attributes (1) through (3). Test Reports shall be signed and dated by the vendor’s Quality Assurance rep. and shall be traceable to the purchase contract under which the material is provided.
File details come from the government source that posted it. Updated .