50015-260514.pdf

Invitation to bid to furnish and deliver a Fully Automated Nucleic Acid Extraction Workstation for the

Biology Department

State Of Louisiana Southeastern Louisiana University

Hammond, Louisiana Cover Page

Issuing Agency:

Southeastern Louisiana University Purchasing Department

SLU 10800

Hammond, LA 70402-0800

Director of Purchasing: Richard Himber

Procurement Specialist: Misty Betz Telephone: (985) 549-5414

Requisitioned By: Kyle Piller Telephone: (985) 549-

Release Date: April 27, 2026

Deadline for Fax Inquiries: April 29, 2026 Fax To: 985-549-3810 Attn: Misty Betz

Bid Opening Date: May 14, 2026

Bid Opening Time: 4:00 p.m., Central Time

Bid Opening Location:

Southeastern Louisiana University Purchasing Department Property Control & Supply Building 2400 North Oak Street Hammond, Louisiana

This ITB is available in electronic form at https://wwwcfprd.doa.louisiana.gov/OSP/LaPAC/dspBid.cfm?search=department&term= 42 It is available in PDF format or in printed form by submitting a written request to the Procurement Specialist listed above. It is the Bidder’s responsibility to check the Office of State Purchasing LaPAC website frequently for any possible addenda that maybe issued. Southeastern is not responsible for a bidder’s failure to download any addenda documents required to complete an Invitation to Bid.

https://wwwcfprd.doa.louisiana.gov/OSP/LaPAC/dspBid.cfm?search=department&term=42 https://wwwcfprd.doa.louisiana.gov/OSP/LaPAC/dspBid.cfm?search=department&term=42

State Of Louisiana

Southeastern Louisiana University Hammond, Louisiana

The Southeastern Louisiana University (SLU) Purchasing Department will receive sealed bids until 4:00 P.M. on the bid opening date specified in the solicitation document. No bid responses will be considered by the SLU Purchasing Department after 4:00 P.M.

Beginning at that time, bids shall be publicly opened and read aloud to those present in the SLU Purchasing Department.

Bids submitted are subject to LA R.S. 39:1551-1736; Purchasing Rules and Regulations;

Executive Orders; General Conditions; any Special Conditions; and Specifications listed in the solicitation document.

The purpose of this solicitation is to set forth the requirements and specifications of Southeastern Louisiana University. The contents of this solicitation and the Bidder/ Vendor/ Contractor's bid response shall become contractual obligations if a contract (purchase order) ensues.

Instructions to Bidders

1) Bid Forms: Per LA R.S. 39:1556, all written bids, unless otherwise provided for, must be submitted on, and in accordance with, forms provided, properly signed in ink or electronic signature by an authorized representative of the bidding entity.

Bids submitted in the following manner will not be accepted: (1) Bid contains no signature indicating intent to be bound; (2) Bid filled out in pencil; (3) Bid sent by facsimile equipment or email. Price alterations to bid responses received before bid opening time will be considered provided the written price alteration has been received and timestamped before bid opening time. Any other alterations of the bid response form or foreign conditions attached thereto may cause rejection of the bid response without further consideration.

2) Standard of Quality: Any product or service bid shall conform to all applicable Federal and State laws and regulations and specifications contained in the solicitation document. Unless otherwise specified in the solicitation document, any manufacturer's name, trade name, brand name, or catalog number used in the specifications is for the purpose of describing the quality level and characteristic required. Bidder should specify the brand and model number of the product

Mailing Address:

Southeastern LA University Purchasing Department

SLU 10800

Hammond, LA 70402

Delivery Address:

Southeastern LA University Purchasing Department Property Control & Supply Bldg.

2400 North Oak St.

Hammond, LA 70402 offered in his bid. Bids not specifying brand and model number shall be considered as offering the exact products specified in the solicitation document.

3) Descriptive Information: Bidders proposing an equivalent brand or model should submit with the bid response information (such as illustrations, descriptive literature, and technical data) sufficient for the University to evaluate quality, suitability, and compliance with the specifications of the solicitation document.

Failure to submit descriptive information may cause bid to be rejected. Any change made to a manufacturer's published specification submitted for a product shall be verifiable by the manufacturer. If item(s) bid does not comply with specifications (including brand and/or product number), bidder should state in what respect the item(s) deviate. Failure to note exceptions on the response form will not relieve the successful bidder(s) from supplying the actual products requested.

4) Bid Opening: Bidders may attend the bid opening, but no information or opinions concerning the ultimate contract award will be given at the bid opening or during the evaluation process. Bids may be examined 72 hours after request is made.

Information pertaining to completed files may be secured by visiting the SLU Purchasing Department during normal working hours. Written bid tabulations will not be furnished.

5) Louisiana Preference: Preference is hereby given to products produced, manufactured, harvested, grown or assembled in Louisiana which are equal in quality to products produced, manufactured, harvested, grown or assembled outside of Louisiana. The bidder shall state his right to claim the ten percent (10%) preference in his bid response and the bidder should state the respective Louisiana location where each qualifying item is produced, manufactured, harvested, grown or assembled.

6) Notice of Special Programs Available for Small Business: https://www.opportunitylouisiana.com/small-business/special-programs-for-small-business

7) Signature Authority: In accordance with LA Revised Statute 39:1594 (Act 121), the person signing the bid must be: (1) A current corporate officer, partnership member or other individual specifically authorized to submit a bid as reflected in the appropriate records on file with the Secretary of State; or (2) An individual authorized to bind the vendor as reflected by an accompanying or as provided upon request a corporate resolution or affidavit. By signing the bid, the bidder certifies compliance with the above.

https://www.opportunitylouisiana.com/small-business/special-programs-for-small-business https://www.opportunitylouisiana.com/small-business/special-programs-for-small-business

General Conditions

The SLU Purchasing Department reserves the right to award items separately, grouped or on an all-or-none basis and to reject any or all bids and waive any informalities.

1) Prices: Unless otherwise specified in the solicitation, bid prices shall be complete, including transportation and handling prepaid by the bidder to destination - SLU, Hammond, LA. Bids other than FOB destination may be rejected. Bid prices should be quoted in the unit of measure stated. Bid prices shall be firm for a minimum of thirty (30) calendar days, unless otherwise specified by SLU in the solicitation document.

2) Payment Terms: Cash discounts for less than 30 days may be offered, but will not be considered in determining awards. Bids containing "payment in advance" or "COD" requirements may be rejected. Payment is to be made within 30 days after receipt of properly executed invoice or delivery, whichever is later.

3) Delivery: Bids may be rejected if the delivery time indicated is longer than that specified in the solicitation document.

4) Taxes: Bidder is responsible for including all applicable taxes in the bid price. The University is currently exempt from Louisiana State Sales and Use Taxes, and local parish and city taxes. An exemption certificate for state sales and use tax can be provided upon request.

5) New Products: Unless specifically called for in the solicitation document, all products for purchase must be new, never previously used, and the current model and/or packaging. No remanufactured, demonstrator, used or irregular product will be considered for purchase unless otherwise specified in the solicitation document.

The manufacturer's standard warranty will apply unless otherwise stated in solicitation.

6) Default of Contractor: Failure to deliver within the time specified in the solicitation document will constitute a default and may cause cancellation of the contract.

Where the University has determined the contractor to be in default, the state reserves the right to purchase any or all products or services covered by the contract on the open market and to charge the contractor with cost in excess of the contract price. Until such assessed charges have been paid, no subsequent bid from the defaulting contractor will be considered.

7) Contract Cancellation: The University shall have the right to cancel any contract, in accordance with Purchasing Rules and Regulations, for cause, including but not limited to, the following: (1) failure of the vendor to deliver within the time specified in the contract; (2) failure of the product or service to meet specifications, conform to sample quality, or to be delivered in good condition; (3) misrepresentation by the contractor; (4) fraud, collusion, conspiracy or other unlawful means of obtaining any contract with the state; (5) conflict of contract provisions with constitutional or statutory provisions of state or federal law; (6) any other breach of contract.

8) Applicable Law: All contracts shall be construed in accordance with and governed by the laws of the State of Louisiana.

9) Equal Opportunity: By submitting and signing this bid, bidder agrees that he will not discriminate in the rendering of services to and/or employment of individuals because of race, color, religion, sex, age, national origin, handicap, disability, veteran status, or any other non-merit factor.

10) By submitting a response to this solicitation, the bidder or proposer certifies and agrees that the following information is correct: In preparing its response, the bidder or proposer has considered all proposals submitted from qualified, potential subcontractors and suppliers, and has not, in the solicitation, selection, or commercial treatment of any subcontractor or supplier, refused to transact or terminated business activities, or taken other actions intended to limit commercial relations, with a person or entity that is engaging in commercial transactions in Israel or Israeli-controlled territories, with the specific intent to accomplish a boycott or divestment of Israel. The bidder also has not retaliated against any person or other entity for reporting such refusal, termination, or commercially limiting actions. The state reserves the right to reject the response of the bidder or proposer if this certification is subsequently determined to be false, and to terminate any contract awarded based on such a false response.

11) Louisiana Revised Statute 39:1753.1 requirements shall apply to any equipment component which enables any form of connectivity.

12) Piggyback: Other Louisiana Governmental Agencies may purchase at the same terms and conditions if agreed upon by awarded vendor.

13) Prohibition of Companies That Discriminate Against Firearm and Ammunition Industries: In accordance with La.R.S. 39:1602.2, the following applies to any competitive sealed bids, competitive sealed proposals, or contract(s) with a value of $100,000 or more involving a for-profit company with at least fifty full-time employees: Unless otherwise exempted by law, by submitting a response to this solicitation or entering into this contract, the Bidder, Proposer or Contractor certifies the following:

a. The company does not have a practice, policy, guidance or directive that discriminates against a firearm entity or firearm trade association based solely on the entity’s or association’s status as a firearm entity or firearm trade association;

b. The company will not discriminate against a firearm entity or firearm trade association during the term of the contract based solely on the entity’s or association’s status as a firearm entity or firearm trade association.

The State reserves the right to reject the response of the Bidder, Proposer or Contractor if this certification is subsequently determined to be false, and to terminate any contract awarded based on such a false response or if the certification is no longer true.

Bid Response Form

Bidder’s Name:

Mailing Address:

City, State, Zip Code:

Email Address:

Telephone Number:

Fax Number:

Scope: To Furnish and Deliver Fully Automated Nucleic Acid Extraction Workstation for the Biology Department

I/we do hereby acknowledge receipt of the following addenda (if any):

Addendum number and date:

Addendum number and date:

Other Requirements:

Bidder shall include the cost of transportation and handling in the unit price of item offered -- F.O.B. University, Hammond, LA.

If bidding other than the specified make and model, then the bidder should attach illustrations and descriptive literature of the item(s) offered to the bid response form for evaluation purposes.

The attached Instructions to Bidders/General Conditions shall be a part hereof.

To the Vendor:

Whenever brand name specifications or catalogue numbers are used to describe the standard of quality, performance and other characteristics, the use of such specifications shall not restrict unless otherwise specified, the submission of equivalent products.

This solicitation is a sealed bid and must be returned by mail or delivered in person.

Bid response forms cannot be faxed and any fax responses shall be rejected.

Terms: Net 30 Prox., F.O.B., Hammond, Louisiana.

Taxes: Any taxes, other than state sales and use tax, shall be included within the bidder's unit price. The University is currently exempt from state sales and use tax.

Signature to the Bid Response Form shall be construed of acceptance of the Invitation to Bid in its entirety.

Authorized Officer Signature:

Printed Name:

Title: Date:

Bid Response Page

Item No.

Description Qty Price Total

1. Fully Automated Nucleic Acid Extraction Workstation

2. Warranty 1

3. Training 1

Total Bid Amount

Name of Company:

Date:

Bidder’s Initials:

See Next Page for Specifications

Specifications

Item: Fully Automated Nucleic Acid Extraction Workstation

Item Description: A fully automated system capable of performing magnetic bead-based DNA/RNA extraction workflows, including sample preparation, purification, and transfer.

The equipment provided must be new and delivered as a fully integrated system. The vendor shall include all necessary components for complete functionality, including hardware, software, and all required accessories. In addition, the vendor is responsible for providing installation and comprehensive training for laboratory personnel. The system must be delivered as a turnkey solution, fully operational and ready for immediate use in a laboratory setting upon completion of installation.

Specific Features

1. Core System

1.1. The system must be an enclosed automated liquid handling workstation with a high-density deck configuration (9 mm spacing), designed to minimize contamination and support high-throughput nucleic acid extraction workflows.

1.2. The system must include a minimum of four (4) independent pipetting channels with a pipetting range of 1 µL to 1000 µL and support dynamic positioning for non-uniform sample processing.

2. Extraction Technology

2.1. The system must include a fully integrated magnetic bead-based extraction module utilizing a magnetic rod-based separation mechanism capable of automated nucleic acid purification.

2.2. The system must support:

2.2.1. DNA and RNA extraction workflows

2.2.2. High molecular weight DNA extraction

2.2.3. 96-well deep well plate processing

2.3. The system must be compatible with commercially available magnetic bead-based extraction kits for blood and tissue samples and support standardized extraction protocols.

3. Integrated Processing Features

3.1. The system must include:

3.1.1. Automated plate handling and transport using an integrated gripper mechanism

3.1.2. Capability for parallel processing of multiple plates

3.1.3. A dual-position or equivalent automated processing system to allow simultaneous preparation and extraction steps

3.1.4. Integrated workflow coordination between liquid handling and magnetic extraction modules

4. Pipetting and Contamination Control

4.1. The system must include:

4.1.1. Air displacement pipetting technology

4.1.2. Real-time aspiration monitoring

4.1.3. Pressure-based aspiration and dispense verification

4.1.4. Anti-droplet control technology

4.1.5. Precision tip attachment mechanism with minimal mechanical force

4.1.6. Aerosol-free tip ejection technology

4.1.7. Dual liquid level detection (capacitive and pressure-based

5. System Hardware Configuration

5.1. The system must include a modular deck configuration with:

5.1.1. Multi-position carrier bases

5.1.2. Stacked and standard carriers

5.1.3. Pedestals for:

5.1.3.1. Deep well plates

5.1.3.2. Filter tip racks

5.1.3.3. Multi-tube adapters

5.1.3.4. Reagent reservoirs (including 50 mL and 200 mL formats)

5.1.4. Reagent carrier systems with low dead volume design

5.2. The system must support flexible workflow configuration for complex extraction protocols.

6. Workflow Capabilities

6.1. Must support:

6.1.1. Non-uniform sample layouts

6.1.2. Variable volume pipetting

6.1.3. Complex workflows (e.g., cherry picking)

6.2. Must allow fully automated walk-away operation

7. Software

7.1. The system must include an advanced integrated control software platform capable of:

7.1.1. Workflow programming and automation

7.1.2. Real-time process monitoring

7.1.3. Error detection and recovery

7.1.4. Audit trail generation

7.2. The software must support custom protocol development and graphical workflow design.

8. Physical Requirements

8.1. System must:

8.1.1. Fit within standard laboratory space

8.1.2. Have dimensions not exceeding:

8.1.2.1. Depth: 28 inches

8.1.2.2. Height: 36 inches

8.1.2.3. Width: 66 inches

9. System Components

9.1. The system must include:

9.1.1. Integrated system controller (computer workstation)

9.1.2. Barcode scanning capability for sample tracking

9.1.3. Pipetting verification kit

9.1.4. Compatibility with conductive pipette tips and reagent reservoirs suitable for automated systems

10. Performance Requirements

10.1. The system must be capable of performing high-throughput nucleic acid extraction while maintaining consistent, high-quality results. It shall ensure high reproducibility and yield across all runs, and must be designed to minimize the risk of contamination throughout the extraction process.

11. Installation

11.1. Vendor must provide:

11.1.1. On-site installation

11.1.2. Installation Qualification (IQ) and Operational Qualification (OQ)

11.1.3. Pipetting verification and system validation

12. Training

12.1. Vendor must provide:

12.1.1. Operator training and method setup support

13. Warranty and Support

13.1. The system must be supported by a minimum one (1) year warranty covering parts and labor. The vendor shall ensure ongoing availability of technical support and service to maintain optimal system performance. In addition, the vendor must provide reliable access to necessary consumables and replacement parts to support continuous laboratory operations.

14. Delivery Requirements

14.1. Delivery shall be FOB Destination to Southeastern Louisiana University, with all shipping responsibilities borne by the vendor until the equipment is received at the designated location. Vendor must provide inside delivery (white-glove service) including delivery to final location, unpacking, and debris removal.

15. Evaluation Criteria

15.1. Bids will be evaluated based on the degree of compliance with the stated specifications, as well as the overall technical performance of the proposed system. Consideration will also be given to the total cost and the vendor’s demonstrated experience, including the quality of support and service provided.

Contact Information Dr. Kyle Piller Director for Environmental Research Department of Biological Sciences Southeastern Louisiana University

Hammond, Louisiana

(985) 549-2191 kyle.piller@selu.edu

Vendor must include all expenses (this includes shipping and discounts) in the unit price.

See following pages for insurance requirements.

Insurance Requirements for Vendors & External Providers

Before commencing work, the Other Party (contractor and/or subcontractor) shall obtain at its own cost and expense the following insurance, if applicable, placed with insurance companies authorized to do business in the State of Louisiana with A.M. Best ratings of A-:VI or higher. The Other Party shall provide evidence of such insurance as required by the Agency. A cancellation notice will be provided to the Agency in the event of a cancellation for all of the following stated insurance policies

1) Minimum Scope and Limits of Insurance

a) Workers Compensation

i) Workers Compensation insurance shall be in compliance with the Workers

Compensation law of the State of the Other Party’s headquarters. Employers Liability is included with a minimum limit of $1,000,000 per accident/per person/per disease. If work is to be performed over water and involves maritime exposure, applicable LHWCA, Jones Act, or other maritime law coverage shall be included. A.M. Best's insurance company rating requirement may be waived for workers compensation coverage only.

b) Commercial General Liability

i) Commercial General Liability insurance, including Personal and Advertising

Injury Liability and Products and Completed Operations, shall have a minimum limit per occurrence of $1,000,000 and a minimum general annual aggregate of $2,000,000. The Insurance Services Office (ISO) Commercial General Liability occurrence coverage form CG 00 01 (current form approved for use in Louisiana), or equivalent, is to be used in the policy. Claims-made form is unacceptable.

c) Automobile Liability

i) Automobile Liability Insurance shall have a minimum combined single limit per occurrence of $1,000,000. The ISO form number CA 00 01 (current form approved for use in Louisiana), or equivalent, is to be used in the policy. This insurance shall include third-party bodily injury and property damage liability for the following automobile coverage classes:

(1) Owned automobiles

(2) Hired automobiles

(3) Non-owned automobiles

ii) Location of operations shall be "All Locations".

iii) Note: If the vendor/contractor does not own an automobile and an automobile is utilized in the execution of the contract, then only hired and non-owned coverage is acceptable. If an automobile is not utilized in the execution of the contract, then automobile coverage is not required.

d) Professional Liability (Errors and Omissions)

i) Professional Liability (Error & Omissions) insurance, which covers the professional errors, acts, or omissions of the Vendor, shall have a minimum limit of $1,000,000. Claims-made coverage is acceptable. The date of the inception of the policy must be no later than the first date of the anticipated work under the Contract. It shall provide coverage for the duration of the Contract and shall have an expiration date no later than 30 calendar days after the anticipated completion of the Contract. The policy shall provide an extended reporting period of not less than 24 months, with full reinstatement of limits, from the expiration date of the policy.

e) Cyber Liability

i) Cyber liability insurance, including first-party costs, due to an electronic breach that compromises the State’s confidential data shall have a minimum limit per occurrence of $1,000,000. Claims-made coverage is acceptable.

The date of the inception of the policy must be no later than the first date of the anticipated work under the Contract. It shall provide coverage for the duration of the Contract and shall have an expiration date no earlier than 30 days after the anticipated completion of the Contract. The policy shall provide an extended reporting period of not less than 24 months from the expiration date of the policy, if the policy is not renewed. The policy shall not be cancelled for any reason, except non-payment of premium.

2) Deductibles and Self-Insured Retentions

a) Any deductibles or self-insured retentions must be declared to and accepted by the Agency. The Vendor shall be responsible for all deductibles and self-insured retentions.

3) Other Insurance Provisions

a) The policies are to contain, or be endorsed to contain, the following provisions:

i) Commercial General Liability and Automobile Liability Coverage

(1) The Agency, its officers, agents, employees, and volunteers shall be named as an additional insured as regards negligence by the Vendor. The ISO Forms CG 20 10 (for ongoing work) and CG 20 37 (for completed work) (current forms approved for use in Louisiana), or equivalents, are to be used when applicable. The coverage shall contain no special limitations on the scope of protection afforded to the Agency.

(2) The Vendor’s insurance shall be primary as respects to the Agency, its officers, agents, employees, and volunteers for any and all losses that occur under the Contract. Any insurance or self-insurance maintained by the Agency shall be excess and non-contributory of the Vendor’s insurance.

b) Workers’ Compensation and Employers’ Liability Coverage

i) To the fullest extent allowed by law, the insurer shall agree to waive all rights of subrogation against the Agency, its officers, agents, employees, and volunteers for losses arising from work performed by the Vendor for the Agency.

c) All Coverages

i) All policies must be endorsed to require 30 calendar days’ written notice of cancellation to the Agency. 10 day written notice of cancellation is acceptable for non-payment of premium. Notifications shall comply with the standard cancellation provisions in the Vendor’s policy. In addition, the Vendor is required to notify the Agency of policy cancellations or reductions in limits.

ii) The acceptance of the completed work, payment, failure of the Agency to require proof of compliance, or Agency’s acceptance of a non-compliant Certificate of Insurance shall not release the Vendor from the obligations of the insurance requirements or indemnification agreement.

iii) The insurance companies issuing the policies shall have no recourse against the Agency for payment of premiums or for assessments under any form of the policies.

iv) Any failure of the Vendor to comply with reporting provisions of the policy shall not affect coverage provided to the Agency, its officers, agents, employees, and volunteers.

4) Acceptability of Insurers

a) All required insurance shall be provided by a company or companies lawfully authorized to do business in the jurisdiction in which the Project is located.

Insurance shall be placed with insurers with an A.M. Best’s rating of A-:VI or higher. This rating requirement may be waived for workers’ compensation coverage only.

b) If at any time an insurer issuing any such policy does not meet the minimum A.M.

Best rating, the Vendor shall obtain a policy with an insurer that meets the A.M.

Best rating and shall submit another Certificate of Insurance within 30 days.

Upon failure of the Other Party to furnish, deliver and maintain such insurance as above provided, this contract, at the election of the Agency, may be suspended, discontinued or terminated. Failure of the Vendor to purchase and/or maintain any required insurance shall not relieve the Vendor from any liability or indemnification under the contract.

5) Verification of Coverage

a) The Vendor shall furnish the Agency with Certificates of insurance reflecting proof of required coverage. The Certificates for each insurance policy are to be signed by a person authorized by that insurer to bind coverage on its behalf. The Certificates are to be received and approved by the Agency before work commences and upon any Contract renewal or insurance policy renewal thereafter.

b) The Certificate Holder shall be listed as follows:

c) In addition to the Certificates, the Vendor shall submit the declarations page and the cancellation provision endorsement for each insurance policy. The Agency reserves the right to request complete certified copies of all required insurance policies at any time.

d) Upon failure of the Vendor to furnish, deliver, and maintain such insurance, the Contract, at the election of the Agency, may be suspended, discontinued, or terminated. Failure of the Vendor to purchase and/or maintain any required insurance shall not relieve the Vendor from any liability or indemnification under the Contract.

6) Subcontractors

a) The Vendor shall include all subcontractors as insured under its policies or shall be responsible for verifying and maintaining the Certificates provided by each subcontractor. Subcontractors shall be subject to all of the requirements stated herein. The Agency reserves the right to request copies of subcontractor’s Certificates at any time.

7) Workers’ Compensation Indemnity

a) In the event the Vendor is not required to provide or elects no to provide workers’ compensation coverage, the parties hereby agree that the Vendor, its owners, agents, and employees will have no cause of action against, and will not assert a claim against, the State of Louisiana, its departments, agencies, agents, and

State of Louisiana Southeastern Louisiana University Purchasing Department

SLU 10800

employees as an employer, whether pursuant to the Louisiana Workers’ Compensation Act or otherwise, under any circumstance. The parties also hereby agree that the State of Louisiana, its departments, agencies, agents, and employees shall in no circumstance be, or considered as, the employer or statutory employer of the Vendor, its owners, agents, and employees. The parties further agree that the Vendor is a wholly independent Vendor and is exclusively responsible for its employees, owners, and agents. The Vendor hereby agrees to protect, defend, indemnify, and hold the State of Louisiana, its departments, agencies, agents, and employees harmless from any such assertation or claim that may arise from the performance of the Contract.

8) The following Indemnification Agreement shall be a provision of the contract:

a) The Vendor agrees to save and hold harmless, protect, defend, and indemnify the State of Louisiana, all State Departments, Agencies, Boards and Commissions, its officers, agents, employees and volunteers, from and against any and all claims, demands, expenses and liability arising out of injury or death to any person or the damage, loss, or destruction of any property which may occur or in any way grow out of any act or omission of the Vendor, its agents, servants, and employees, or any and all costs, expenses and/or attorney fees incurred by the Vendor as a result of any claim, demands, and/or causes of action, except those claims, demands, and/or causes of action arising out of the negligence of the State of Louisiana, all State Departments, Agencies, Boards, Commissions, its agents, representatives, employees, and volunteers.

b) The Vendor agrees to investigate, handle, respond to, provide defense for and defend any such claims, demands, or suits at its sole expense and agrees to bear all other costs and expenses related thereto, even if the claim, demand, or suit is groundless, false, or fraudulent. The State of Louisiana may, but is not required to, consult with the Vendor in the defense of claims, but this shall not affect the Vendor’s responsibility for the handling of and expenses for all claims.

The Below Extensions of Coverage Shall be Marked or Stated on the Certificate of Insurance

Extension of Coverage Acknowledgement

General Liability:

Includes the following as additional insured:

State of Louisiana Southeastern Louisiana University Purchasing Department

SLU 10800

Hammond, LA 70402

Automobile Liability:

Includes the following as additional insured:

State of Louisiana Southeastern Louisiana University Purchasing Department

SLU 10800

Hammond, LA 70402

Workers Compensation:

Includes waiver of subrogation in favor of:

State of Louisiana Southeastern Louisiana University Purchasing Department

SLU 10800

Indemnification Agreement

The Contractor/Vendor hereinafter referred to as Provider shall execute the below Indemnification Agreement prior to furnishing services.

Provider agrees to protect, defend, indemnify, save and hold harmless the State of Louisiana, all State Departments, Agencies, Boards and Commissions, its officers, agents, servants, employees, and volunteers, from and against any and all claims, damages, expenses and liability arising out of injury or death to any person or the damage, loss or destruction of any property which may occur or in any way grow out of any act or omission of Provider, its agents, servants, and employees, or any and all costs, expenses and/or attorney fees incurred by Provider as a result of any claims, demands, suits, or causes of action except of those claims, demands, suits, or causes of action arising out of the negligence of the State of Louisiana, all State Departments, Agencies, Boards, Commissions, its officers, its agents, servants, employees, and volunteers. Provider agrees to investigate, handle, respond to, provide defense for and defend any such claims, demands, suits or causes of action at its sole expense and agrees to bear all other costs and expenses related thereto, even if the claims, demands, suits, or causes of action are groundless, false or fraudulent. The State of Louisiana may, but is not required to, consult with the Provider in defense of claims, but this shall not affect the Provider’s responsibility for the handling of and expenses for all claims.

Provider Name (Name of Business)

Signature (Authorized Officer)

Title

Date Accepted

Contract for Southeastern Louisiana University

Contract Number:

Purpose of Contract:

To furnish and deliver a Fully Automated Nucleic Acid Extraction Workstation for the Biology Department

Indemnification Agreement