50007-SB#7666-4.pdf

October 13, 2025

A D D E N D U M N O. 4

Your reference is directed to SB#7666 NSU Athletics Weight Room Equipment which is scheduled for bid openings at 2:00 p.m. Thursday, October 16, 2025, at Northwestern State University, Natchitoches, Louisiana.

The following addition is being made to the above referenced solicitation:

PURPOSE OF ADDENDUM:

1) RESPOND TO VENDOR INQUIRY:

VENDOR INQUIRY: Please provide pictures, and product size measurements for all 62 items listed on your bid request.

RESPONSE:

Item Quantity Description 1 12 Rack System:

Item#: S-MRR-SS (Signature) 3" x 4" Full Rack w/ Stainless Steel Slots

Size: Overall dimensions are 49” wide, 136” deep and 108” tall. Weigh 1600lbs

Description: Signature Stainless Full Rack 6 post Rack System with Weight Storage for Olympic Plates. Stainless steel adjustment slots are spaced every 3” to accommodate all users. Each 1 - 20 Slots must be Laser Cut Numbered. Bottom brace of rack is raised 5” to allow an extra wide squat stance (greater than 43” of inside of rack). Rack is supported on six rubber coated feet to help keep it from “walking” during use. Rack includes a pull up attachment. Weight Storage posts have a ¼” thick laser cut arch brace as an integral part for strength and allows for a “walk through” design (no cross braces on bottom to get in the way). Arch brace has a full color logo on both sides. 2 Sets of adjustable Bar Catches for racking weight bar and 2 ½” x 2 ½” tube safety bars on half rack side. Weight Storage Pegs, Bar Catches and Safety Spotters have UHMW protection, and all bottom braces are covered in UHMW to reduce paint scratches when using chains.

Stretch Band attachments at the bottom (raised 5” from top of floor – to allow for squat stance wider than 43”) and top of the rack on both sides. Length between first and last adjustment holes are in 5” increments. Twelve (12) removable UHMW covered adjustment pegs with spring collars extend 9” from outside edge of rack to allow proper band position on bar.

2 Multi-functional top braces have 1” holes on all four sides for easy attachment of accessories such as pull-up ropes, balls, etc.

Frame:4” x 3” 7 gauge and 3” x 3” 7 gauge welded construction. All structural frame bolts go thru tubing and have 3/8” thick backing plates and are ½” Zinc coated with washers and lock nuts. Non-structural attachments are attached with ½” flat head bolts tapped into frame post.

Stainless Steel Skins: Each of the 4 outside upright adjustment post are covered in 11-gauge stainless steel laser slotted skins with 3” adjustment slots. Adjustment slots have numbers (1 thru 20) lasered into the stainless steel.

Parts: Bar Catches are formed from 3/8” steel. Two 1” round pegs support the catch in the slots. UHMW plastic protection cover high wear areas. 1” thick UHMW contact area protects the knurling on Olympic bars and has a sloped gusset under bar catch for safety.

It can be easily replaced if ever warn. Weight storage pegs are 1” solid round bar welded to 2” x 3/8” flat bar covered with UHMW capped pegs. Weight pegs are bolted on as a set and can be replaced easily if ever damaged.

Paint: Metal is pretreated with an iron phosphate wash then a 2-3mil baked on powder coating finish is applied. All high wear parts are coated using a texture powder coating.

2 18 Rack System:

Item#: ERP-HR2-AO-S ERP-(2) Post Half Rack Addon to Signature Rack -Includes: Multi-Grip Pullup Bar, Half Rack Safety Spotter & Sandwich Style-J-Cups with UHMW

All adjustment posts are 3″ x 3″ 11-gauge steel; Frames are 3″ x 3″ 11-gauge frames.

Adjustment posts have 2″ hole spacing and laser cut numbers for easy adjustments. Rack system designed with holes on all four sides of post every 2”. Holes on adjacent sides of post are offset 1” so that any configuration can be made and all attachments can be placed multiple positions. Numbers are cut at each hole on 2 sides on every post for easy adjustment of attachments. All frames are connected with 1/2″ bolts with 3/8″ thick backer plates for the strongest connection available. Will have multi grip pull up bar and rack connecting braces. Also, J-CUPS with UHMW

Please refer to rendering of 2 post hybrid systems attached to Item 1.

3 6 Rack System:

Item#: S-MSCC-A-SEL (Signature) Lat Pulldown w/Low Row Attachment - 250lb Stack

Signature Lat Pull Down Low Row is constructed with both 3×4 and 3×3 construction making it one of the most heavy-duty Lat Pulls in the industry. With heavy construction this piece has the advantage of having limited movement when in use which is a huge advantage compared to other Lat Pulls in the industry.

Built with a 250lb weight stack in 10lb increments.

Comes with 4 storage shelves.

Review rendering for size.

4 6 Rack System:

Item#: S-MSCC-A-SEL (Signature) Single Cable Column Attachment w/200lb Stack

Picture of actual item unavailable

5 18 Rack System:

Item#: R-WPDB-RO-612 Rack Dog Bone Weight Storage Option - (8) 12" with

UHMW

No Image Available – See rendering 6 18 Rack System:

Item#: S-D090B (Signature) 0-90 Dumbbell Bench

Adjustable Utility Bench with adjustments at Flat, Incline(30 Deg and 45 Deg) and Military. Seat and back pad have lever arm adjustment that has no pop pins to loose. Seat and back pad have only a 1 ¼” gap. Bench has handle and wheels to allow easy movement within the weight room. The rear cross piece is raised off the ground to allow spotters feet under the bench for greater leverage.

Frame:2 ” x 3” 11 gauge all welded construction.

Parts: All moving parts use oil impregnated brass bushings with ½” bolts.

Padding: 1 ½” thick 6lb closed density foam covered in Naugahide. Sewn vinyl with ¼” vinyl covered back plate to hide staples.

Paint: Metal is pretreated with an iron phosphate wash then a 2-3mil baked on powder coating finish is applied. All high wear parts are coated using a texture powder coating.

7 15 Rack System:

Item#: R-RBC-95-S-5 3" x 3" Rack Bridge Connector w/Holes - 4 Sides - 5" Attach - 8' Spacing

No picture available – Please refer to rendering 8 18 Rack System:

Item#: R-PUPB-RBC Multi-Grip Pull-Up Bar for Rack Bridge Connector with Knurled Ends – Straight

No Picture available – Please refer to rendering.

9 18 Rack System:

Item#: R-LOGOLCL-2L Two Layer Laser Logo for Arches, Panels

No Picture available – NSU will provide artwork that they would like to be laser onto arches.

10 18 Rack System:

Item#: R-COREB-BO Bolt-On Core Blaster

12” x 2” Bar tube with ability to drop into 1” hole. Has 1” cold roll steel bar that goes in hole and the steel bar has a rounded end to make it easy to put into hole. Core Blaster allows for rotational core work.

11 18 Rack System:

Single Leg Squat Attachment for Rack 3" x 3" Post w/1" Holes (single)

Picture example but not of actual product

12 18 Rack System:

Item#:R-BH-LM Bolt-On Accessory Bar Holder - (2) Slots

No picture available.

13 18 Rack System:

Item#: ERP-MSH4 ERP Multi Storage Hooks (4 Hooks)

No picture available.

14 18 Rack System:

Item#: R-CSH Chain Storage Hooks (Pair)

2 swivel hooks on inside of rear post for weightlifting chain storage are bolted on. 3” wide UHMW protection covers inside of post below hooks

No picture available.

15 3 Auxiliary Machines:

Item#: I-GHRH Glute Ham/Hyper Combo

The [WS] Signature Glute/Ham Hyper Combo has a very one-of-a-kind gas-shock adjustment pedal system for quick and easy setup. With multiple eye-lits for easy belt setup as well as holes for band pegs for banded hypers and a split pad design for comfort it’s the primer setup for all your posterior chain work needs.

L: 78” W: 32” H: 55” – Construction: 3x3, 2.5, 2 Steel – Removable Handles, Update Spring assisted pedal system for easy set-up, band attachment points.

16 3 Auxiliary Machines:

Item#: I-GH Glute Ham Bench

The [WS] Signature Linear Bearing Glute/Ham Bench is built out with both 3×4 and 3×3 construction making it a very heavy-duty piece. It is also built with a linear ball bearing adjustment system for smooth length adjustments, and a tube drop pin adjustment system for the feet pads. Comes with two band pegs for banded hyper work.

L: 67” W: 24” H: 44” – Construction: 2x2 Steel – Compact Footprint, Heavy duty frame, band attachment points.

17 2 Auxiliary Machines:

Item#: S-LPISO-SF (Signature) Linear Bearing ISO-Leg Press with Weight Racks-Small Footprint

The [WS] Signature Iso-Lateral Leg Press is built out with two steel guide rods for each carriage as well as band pegs for band enabled work. The leg press comes with an adjustable back plate that is spring loaded for ease of setup via pull pin. This is the perfect leg press for sports focused installations as it a great piece for injury work as well as physical therapy work.

• Footprint: 91” x 33 ½”

• Area of Usage: 101” x 66”

18 2 Auxiliary Machines:

Item#: 045-PS-SHORT Pit Shark Short Frame Belt Squat – PREMIUM PACKAGE (Includes Belt w/Speed Hook, Squat Handles, Power Deck. Weight Storage, Band Pegs and Stainless-Steel Logo Plate)

Unit size – 66” x 62”

19 2 Auxiliary Machines:

Item#: ES-BASE-72-LP EAS Base Side - 2" x 2" w/Logo Panel 72" Tall

20 3 Auxiliary Machines:

Item#: ES-MB-96 EAS Med Ball Storage - 96"

21 1 Auxiliary Machines:

Item#: R-MISC-S SCIFIT PRO 2 Total Body

61" x 30" x 62" – Unit Size

22 6 Cable Attachments:

Item#: B-FBLP48R 2" Fat Bar Revolving Lat Pull Down 48" – Deluxe

23 6 Cable Attachments:

Item#: B-FBDD 2" Fat Bar Double D Handle

24 6 Cable Attachments:

Item#: B-FBPSA36R 2" Fat Bar Revolving Angled Pro Style 36" – Deluxe

25 6 Cable Attachments:

Item#: B-FBSD 2" Fat Bar Single D Handle

26 6 Cable Attachments:

Item#: 002-CA-VTR-36 Triceps Rope - 36'

27 6 Cable Attachments:

Item#: 002-CA-GCCH-R Single D Handle with Rubber Grip

28 6 Cable Attachments:

Item#: 002-GCB-28SR 28' Multi-Purpose Economy Curl Bar with Swivel and Rubber Grips

29 18 Bars:

Item#: 078-OPBR-HC 7' Hard Chrome Power Bar, 1 1/8' Shaft, 20kg

Hardened and tempered bar shaft is 28.5mm (1.125"); Bar is 87" to fit comfortably on standard racks and benches; 20kg (44 lb.) weight; 200,000 PSI tensile strength; Tested for strength and integrity; Measured for straightness; Hardened chrome finish prevents corrosion; Heavy-duty bronze bushings; Medium grade knurling for a secure, comfortable gripping surface; Dual knurling marks for Olympic and power lifting;

Double snap ring construction for maximum strength and integrity; Manufactured to tight tolerances to ensure amazing performance; Great multi-purpose, multi-functional bar for health clubs, CrossFit and athletic weight rooms

30 18 Bars:

Item#: 078-3NBR Intek 7' Hard Chrome Triple Needle Bearing Olympic Bar, 1 1/8" Shaft, 20kg

Hardened and tempered bar shaft is 28.5mm (1.125"); Bar is 87" to fit comfortably on standard racks and benches; 20kg (44 lb.) weight; 200,000 PSI tensile strength; Tested for strength and integrity; Measured for straightness; Hardened chrome finish prevents corrosion; Eight heavy-duty, high-spin, low-friction needle bearings per bar; Medium grade knurling for a secure, comfortable gripping surface; No center knurling; Double snap ring construction for maximum strength and integrity; Manufactured to tight tolerances to ensure amazing performance

31 18 Bars:

Item#: B-TRAP-STD-HL Standard Grip Trap Bar with Fixed Hi/Low 1 1/4" Knurled Handles

No picture available.

32 18 Bars:

Item#: B-TRAP-OEO-STD Open-End Option for Standard Grip Trap Bars

No picture available.

33 18 Bars:

Item#: 085-TB Kabuki Strength - Transformer Bar

34 72 Bars:

Item#: 085-TB Lock-Jaw PRO Collar - Black (Pair)

35 36 Bands:

Item#: 018-909 41" Micro Mini Flex Band

36 36 Bands:

Item#: 018-910 41" Mini Flex Band

37 36 Bands:

Item#: 018-910M 41" Monster Mini Flex Band

38 36 Bands:

Item#: 018-950Y 41" Light Flex Band

39 36 Bands:

Item#: 018-95Y 41" Average Flex Band

40 36 Bands:

Item#: 018-952Y 41" Strong Flex Band

41 18 Accessories:

Item#: R-CCS58 Complete Set 5/8" Chain and Starter Set

42 18 Accessories:

Item#:R-CS58 5/8" Chain 5' Long (Pair) - 18lbs/each

No picture available.

43 18 Accessories:

Item#: 022-SPUD851 Chain straps per pair

No picture available.

44 18 Accessories:

Item#: R-MISC-S Bench Block

No picture available.

45 18 Accessories:

Item#: R-MISC-S Squat Wedge 15% min. 25"

No picture available.

46 216 Accessories:

Item#: 062-DC-200 DC BLOCK - The Original The DC Blocks® Originals’ design provides an interlocking, lightweight, and virtually indestructible weightlifting block for training and medical facilities. DC Blocks® are excellent for pulling from various positions, as well as plyometrics to develop upper and lower body strength and power. Made in the USA from 100% recycled plastics with extreme impact durability and is UV resistant.

15.5”W x 19”L x 2”H; 10.5 lbs.

8 crenellated sections are 3/4” tall Static load capacity: 20,000lbs (9072kgs) Dynamic load capacity: 2,500lbs (1134kgs)

47 18 Accessories:

Item#: R-MISC-S DC Block connector cart w/ top pad

48 2 Accessories:

Item#: R-MISC-S Run Rockets with belt assortment - 37" long, 28" wide, and 40" tall

49 18 Accessories:

Item#001-81008 Airex Balance Pad Elite -Lava

50 18 Power Blocks:

Item#: 059-PRO125-SET PowerBlock Pro 125 Set (12.5-125 lb. per hand x 7.5 lb.

increments) - Includes Stand

51 56 Plates:

Item#: 080-PUB45LB 45 LB Urethane Bumper Plates Black 4 Year Warranty

No picture available.

52 20 Plates:

Item#: 080-PUB25LB 25 LB Urethane Bumper Plates Black 4 Year Warranty

No picture available.

53 20 Plates:

Item#: 080-PUB10LB 10 LB Urethane Bumper Plates Black 4 Year Warranty

No picture available.

54 10 Plates:

Item#: 080-CPB5LB Rubber Coated Change Plate - 5 lbs – BLACK

No picture available.

55 10 Plates:

Item#:080-CPB25LB Rubber Coated Change Plate - 2.5 lbs – BLACK

56 116 Plates:

Item#: 080-LOGO3 Full Color Graphics (within the standard print area)

No picture available.

57 3 Bikes:

Item#: 088-AS-ABC Air Assault Bike – Classic

• Weight: 95.64 lb / 43.38 kg

• Length: 50.95 in / 129.41 cm

• Width: 23.34 in / 59.28 cm

• Height: 50 in / 127 cm

58 2 Bikes:

Item#:088-AS-ARE Assault Runner – Elite

• Weight: 289.2 lbs / 131.2 kg

• Length: 69.9 in / 177.5 cm

• Width: 31.7 in / 80.4 cm

• Height: 64.4 in / 163.5 cm

59 Plyo Boxes:

Item#: 001-20805 Power Systems Foam Plyo Boxes (set of 5)

Landing surface is 35 1/2" x 30".

60 5 Kelar Med Balls:

Item#: 031-EXMDBL-14 14" Med Ball - 10 lbs.

61 5 Kelar Med Balls:

Item#: 031-EXMDBL-14 14" Med Ball - 12 lbs.

See picture for Item 60 – same product different weight

62 5 Kelar Med Balls:

Item#: 031-EXMDBL-14 14" Med Ball - 14 lbs.

See picture for Item 60 – same product different weight

PURPOSE OF ADDENDUM:

1) RESPOND TO VENDOR INQUIRY:

VENDOR INQUIRY: Please provide last year's winning bid tabulations or the last weight room equipment purchase totals.

RESPONSE: The last weight room equipment purchase was made through the Demons Unlimited Foundation.

This addendum is hereby officially made a part of the referenced solicitation and should be attached to the bidder’s proposal or otherwise acknowledged therein.

Failure to acknowledge addendum may result in the non-consideration of the bid submission.

If you have already submitted your proposal and this addendum causes you to revise your original bid, please indicate changes below and return to Business Affairs/Purchasing Section prior to bid opening in an envelope marked with the bid number, bid opening date, and time.

If this addendum does not cause you to revise your bid, please acknowledge receipt of the addendum by signing your name and company below and returning it in accordance with the provisions above.

Company Name Authorized Signature Date

Submitted by: Ashlee Grayson Director of Purchasing