5-RFP-02-Scope of Services, Remodeling Services 26-0336.pdf

PDF 226 KB Posted

Attached to
RFP Remodeling Services
Solicitation number
26-0336
Issued by
Tarrant County, Texas

About this file

This Scope of Services document is a Request for Proposals (RFP) issued by the City of Fort Worth, Texas, Purchasing Division for comprehensive remodeling services on an as-needed basis for City-owned facilities and infrastructure. The RFP (Reference #26-0336) seeks vendor proposals to establish an annual agreement covering a broad range of construction and renovation services including demolition, carpentry, paving, concrete work, fencing, wall construction, masonry, painting, electrical, HVAC, plumbing, welding, and miscellaneous construction services. The initial contract term is four years with two optional one-year renewal periods, contingent upon 90-day notice of non-renewal by either party. The document specifies detailed performance requirements including vendor supervision, safety compliance with OSHA and EPA regulations, regular business hours availability (Monday-Friday, 8:00 AM-5:00 PM), and 24/7/365 emergency service response capabilities with two-hour acknowledgment and four-hour on-site arrival requirements for expedited requests.

The RFP evaluation will be conducted using a "best value" methodology with proposals scoring less than 50 percent on non-price factors deemed non-responsive. Evaluation criteria include Small Business participation (up to 20 points), Cost (up to 15 points), Qualifications and Company Experience (up to 20 points), Staffing and Project Managers (up to 15 points), Capacity and Service Delivery (up to 15 points), and Past Performance/References (up to 15 points). The City has established a 30 percent Small Business participation goal, requiring at least 30 percent of total contract value to be subcontracted to or spent with certified Small Business firms. Proposers must submit completed response forms, a detailed bid table (BT-29DH), technical responses addressing exceptions or substitutions, pricing in the specified format, and current Small Business Certification documentation. Permit fees and Infrastructure Plan Review Center fees are waived for work performed under this contract as approved by City Council.

View the file

Other files

File Type Posted
3-RFP-01-Instruction to Proposers.pdf PDF
2-RFP-06-Small Business Utilization Form V1.docx DOCX document
7-RFP-03-Draft Vendor Service Agreement.docx DOCX document
6-RFP-04-Authorized Signature and Questionnaire 26-0336.pdf PDF
1-RFP-05-Forms.pdf PDF
4-RFP-07-Deviations.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CITY OF FORT WORTH - PURCHASING DIVISION

SCOPE OF SERVICES

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 1 of 19 RFP Title: Remodeling Services

1.0 INTRODUCTION AND PURPOSE

The intent of these specifications is to describe the minimum requirements necessary to establish an annual agreement to provide on-call remodeling, renovation, repair, replacement, alteration, and improvement services for City-owned facilities and related infrastructure on an as-needed basis.

Services may include, but are not limited to, demolition, site preparation, carpentry, paving, concrete, fencing, wall construction and repair, masonry, painting, electrical, heating, ventilation, and air conditioning (HVAC), plumbing, welding and metal work, and other miscellaneous construction, remodeling, renovation, repair, replacement, and improvement services required to maintain, repair, renovate, or improve City-owned facilities and related infrastructure.

The initial term of this agreement will be four (4) years with two (2) one (1) year renewal options, unless City or Supplier provides the other party with notice of non-renewal at least 90 days before the expiration of the initial term or renewal periods.

Department Designee will mean a City of Fort Worth employee assigned by the Department to assist with the compliance, oversight, or administration of the project for their department of employment.

2.0 VENDOR RESPONSIBILITIES

2.1. Supervision – The Vendor will, during all period of contract performance, provide competent supervision of its employees to assure complete and satisfactory fulfillment of the work and the terms

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 2 of 19 of this Agreement. The vendor or a capable, fully authorized representative must be immediately available during all work activities to receive all special instructions from the Department Designee.

2.2. Safety – The Vendor will be thoroughly familiar with all prevailing safety measures pertinent to its operations. This will include, but not necessarily be limited to, Environmental Health Agency (EPA) regulations, Fort Worth City Ordinances (FWCO), and Occupational Safety and Health Agency (OSHA) regulations. In addition, the Vendor will be whole responsible for instructing its employees in these safety measures and seeing that they are fully complied with in every respect.

2.3. The Vendor will ensure the safety of their employees, City employees, and the general public during the performance of all services under this Agreement. The Vendor will ensure that all crews are fully and properly equipped to perform services promptly and safely.

2.4. The Vendor will have the ability to be reached by email or telephone during normal business hours, Monday – Friday 8:00 AM to 5:00 PM.

3.0 HOURS OF SERVICE

3.1. The Vendor will perform all non-expedited service requests during regular business hours, which is defined as Monday through Friday from 8:00 am – 5:00 pm whenever it is deemed in the best interest of the city. Such adjustments will be communicated in writing to the Vendor at least one (1) business day before work is to begin.

3.2. If Vendor is unable to provide these services during the designated regular hours, the Vendor will obtain written approval from the City

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 3 of 19 designee to perform the services during non-regular hours Monday through Friday 5:01pm – 7:59am. Saturday, Sunday, and City holidays. Work performed during non-regular hours which are covered under this provision will be billed at the non-regular labor rate.

3.3. The Vendor will not charge an overtime labor rate due to lack of available staff for services performed during non-regular hours that could reasonably be completed during regular business hours. The Vendor’s lack of available staff to perform services will not require the city to pay the Vendor’s employees for overtime.

3.4. City Observed Holidays:

3.4.1. New Year’s Day

3.4.2. Martin Luther King Jr. Day

3.4.3. Memorial Day

3.4.4. Juneteenth

3.4.5. July 4th

3.4.6. Labor Day

3.4.7. Thanksgiving Thursday and the following Friday

3.4.8. Christmas Day

4.0 EMERGENCY SERVICES

4.1. The Vendor understands and agrees that the city may require expedited or emergency services.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 4 of 19

4.2. The Vendor will be available to perform expedited or emergency services twenty-four (24) hours per day, three hundred sixty-five

(365) days per year.

4.3. The Vendor understands and agrees that the Department designee will have the sole and final authority in determining when services will be designated as expedited or emergency.

4.4. The Vendor will acknowledge an expedited request within two (2) hours or less and be onsite within four (4) hours unless otherwise approved or agreed upon by the Department designee. The response time will begin at the time the call is made and end at the time the appropriate Vendor’s employees sign in at the work site.

4.5. The Vendor will provide a complete fixed-price quote with an estimated completion time to the Department designee within two (2) hours of arrival to the job site. If two (2) hours is not enough time to complete the quote, Vendor will notify the Department designee to request additional time or to request a verbal quote to be provided.

The Vendor and Department designee may mutually agree that a verbal quote for expedited services will meet the needs of the City.

Verbal quotes will not release the Vendor from its responsibilities as described by this Agreement.

4.5.1. If providing a verbal quote for expedited services, the Vendor will provide the Department designee with a written fixed-price quote, and summary of the services permed within two

(2) business days of the request for expedited services, unless otherwise requested or specified by the Department designee.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 5 of 19

4.6. The Vendor understands and agrees that the City reserves the right to contact other vendors to fulfill the requirements of the expedited services in the event the Vendor cannot respond to the expedited repair.

5. REMODELING SCOPE OF WORK

5.1. The Vendor will assist City staff with minor or major renovations, repairs, alterations, and improvements to City-owned buildings.

Services may include, but are not limited to, demolition, site preparation, carpentry, paving, concrete work, fencing, wall construction and repair, masonry, painting, electrical, HVAC, plumbing, welding, and sheet metal work, and other miscellaneous construction and remodeling services.

5.2. The Vendor understands and agrees that repairs or remodels will be based on the size of the projects, City Department personnel’s ability to perform tasks, and the City Department staffing availability.

5.3. The Vendor understands and agrees that materials and services under this Agreement support all City-owned facilities, varying in size, on an as needed basis.

5.4. The Vendor understands and agrees that all materials will be delivered, and services will be rendered at the location specified on the purchase order or per direction of the Department designee.

5.5. The Vendor understands and agrees that all work will meet building codes and will be inspected as required by the City of Fort Worth.

5.6. The Vendor will provide all maintenance manuals for installation and repairs.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 6 of 19

5.7. The Vendor will ensure that all installations are in full compliance with the Americans with Disabilities Act.

5.8. In accordance with the City Code of Ordinances, Part II, Chapter 7-1

Fort Worth Building Administrative Code, Section 109.2.1, Exception 2; “Work by non-City personnel on property under the control of the City of Fort Worth shall be exempt from the permit fees only if the work is for action under a contract that will be or has been approved by City Council with notes in the contract packages stating the fee is waived.” Infrastructure Plan Review Center (IPRC) Plan Review Fees and other associated Development Fees will also be waived for this project.

5.9. General Work Performance Requirements

5.9.1. The Vendor will perform all work in accordance with

applicable Federal, State, and local laws, City Ordinances, rules, and industry standards.

5.9.2. Obtain all required permits and coordinate inspections, when applicable.

5.9.3. Perform all work in accordance with applicable manufacturer recommendations and specifications.

5.9.4. Protect City property, adjacent finishes, utilities, equipment, and occupied areas from damage during construction activities.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 7 of 19

5.9.5. Maintain a safe and secure work area for Vendor personnel, City employees, and the public throughout the duration of the project.

5.9.6. Furnish all labor, supervision, materials, equipment, tools, transportation, and incidentals necessary to complete the work unless otherwise specified.

5.9.7. The Vendor will restore affected work areas upon completion of work and perform construction clean-up, including removal of debris, waste, excess materials, and other items resulting from the Vendor’s work, leaving the work area clean and ready for use.

5.10. Demolition

5.10.1. The Vendor will not perform demolition services until asbestos clearance has been communicated in writing to the Vendor by the Department designee.

5.10.2. The Vendor will remove existing coverings, glues, adhesives, and other materials to bring surfaces to as close to a “like new” condition as reasonably possible.

5.10.3. The Vendor will use best sustainable practices to remove glue, adhesives, and any other materials with the least amount of chemicals, volatile organic compounds (VOCs) and business interruption.

5.10.4. The Vendor will work with the Department designee to

coordinate furniture or electronic moves as required. Furniture moving will be included in the price.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 8 of 19

5.10.5. The Vendor will determine structural integrity of the surfaces following removal of the surface coverings. Any damages created by the Vendor during demolition, not approved by the Department designee, will be repaired at no cost to the City.

5.11. Site Preparations

5.11.1. The Vendor will ensure that surfaces are clean and free from moisture, grease, wax, paint or other foreign substances and use best sustainable practices to remove substances.

5.11.2. The Vendor will perform any required tests prior to

installation and in compliance with applicable manufacturer’s guidelines.

5.11.3. The Vendor will understand the Department designee may inspect the substance to confirm that any irregularities have been removed prior to installation.

5.11.4. The Vendor will ensure that all materials used in preparation and repair will be recommended by the manufacturer and will be chemically and physically compatible with the install.

5.11.5. The Vendor will work with Department designee to

coordinate furniture or electronic moves as required.

Furniture moving should be included in the price.

5.11.6. The Vendor will determine structural integrity of the surfaces following removal of the surface coverings. Any damage created by the Vendor during site preparations, not approved

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 9 of 19 by the Department designee, will be repaired at no cost to the City.

5.12. Carpentry

5.12.1. Carpentry will include but is not limited to metal framing, drywall, installation and repair of doors, windows, cabinets, and counter tops.

5.12.2. The Vendor will ensure installation of metal framing, drywall, doors, windows, cabinets, countertops, and other related installations are on an even plane.

5.13. Paving

5.13.1. Paving will include but not limited to concrete and asphalt parking lot repairs and replacements, sidewalk repairs and replacements, striping, signage, as well as other paving related tasks.

5.13.2. The Vendor will ensure that any artwork, lines, and

markings are restored to match existing work. This may include reproducing distractive marks such as identification marking and logos. The Department designee will provide written verification and approval of all markings before installation.

5.13.3. The vendor will ensure proper storage of all materials in strict accordance with manufacturer's instructions and specifications, and in accordance with industry standards.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 10 of 19

5.13.4. The vendor will ensure proper drainage system has been used to minimize impervious areas.

5.13.5. The Vendor will secure the area and allow surfaces to properly cure.

5.14. Concrete Work

5.14.1. Concrete work will include but not be limited to sidewalk and parking lot repairs and replacements, interior repair and replacement of concrete, as well as any other related concrete tasks.

5.14.2. The Vendor will apply finishing and sealing products in strict accordance with manufacturer’s instructions and

5.14.3. The Vendor will ensure that any artwork, lines, and

include reproducing distinctive marks such as identification markings and logos. The department designee will provide

5.14.4. The vendor will ensure proper drainage system has been used to minimize impervious areas.

5.14.5. Vendor will secure the area and allow surfaces to properly cure.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 11 of 19

5.15. Fencing

5.15.1. Fencing work will include but not be limited to installation, repair, replacement, and removal of fencing, gates, posts, and associated components.

5.15.2. Vendor will ensure fencing and gates are properly installed, aligned, secured, and functional in accordance with manufacturer recommendations and applicable industry standards.

5.15.3. Vendor will repair or restore surfaces and areas disturbed during fencing work upon completion of the project.

5.16. Wall Construction and Repair

5.16.1. Wall construction and repair will include but not limited to construction, alteration, repair, replacement, and removal of interior and exterior walls, partitions, framing, drywall, and related components.

5.16.2. Vendor will coordinate wall construction and repair with existing building systems, including electrical, plumbing, HVAC, and other utilities, as applicable.

5.16.3. Vendor will ensure completed wall surfaces are properly finished and prepared to match existing adjacent surfaces, as applicable.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 12 of 19

5.17. Masonry

5.17.1. Masonry work will include but not limited to cinder block, brick, and stone repairs and replacements, as well as other masonry related repairs.

5.17.2. The Vendor will apply to finishing and sealing products in strict accordance with manufacturer’s instructions and

5.17.3. The Vendor will ensure that any artwork, lines, and

include reproducing distinctive marks such as identification markings and logos. The Department designee will provide

5.18. Painting

5.18.1. Painting will include but not be limited to drywall finishing

(tape and bed), sanding, preparing surfaces, and painting one or more coats as well as any other painting related tasks.

5.18.2. The Vendor will apply preparation, finishing, and sealing products in strict accordance with manufacturer's instructions and specifications and in accordance with industry standards.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 13 of 19

5.19. Electrical

5.19.1. Electrical work will include but is not limited to pulling of wire, running circuits, installing outlets, in addition to any other electrical related tasks.

5.19.2. The Vendor will ensure work is completed or supervised by licensed electricians.

5.19.3. The Vendor will ensure all work is completed in strict accordance with industry standards.

5.20. HVAC

5.20.1. HVAC will include but is not limited to setting HVAC units, install and repair, thermostats, ductwork, supply and return registers in addition to any other HVAC related tasks.

5.20.2. The Vendor will ensure work is completed or supervised by licensed HVAC technicians.

5.20.3. The Vendor will ensure all work is completed in strict

5.21. Plumbing

5.21.1. Plumbing will include but not be limited to installation and repair of water and waste lines, water heaters, bathroom fixtures, sinks, toilets, urinals, in addition to other plumbing

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 14 of 19

5.21.2. The Vendor will ensure work is completed or supervised by licensed Journeyman Plumbing Technicians.

5.21.3. The Vendor will ensure all work is completed in strict

5.22. Welding and Metal Work

5.22.1. Welding and metal work may include but is not limited to sheet metal fabrication, fencing, gates, welding, and other

5.22.2. The Vendor will ensure work is completed or supervised by qualified City designee, as applicable.

5.22.3. The Vendor will ensure all work is completed in strict

5.23. Miscellaneous Services

5.23.1. The City may request other related work or services that are not specified herein. The Vendor will perform requested miscellaneous services after the Department designee authorizes such services, in writing, by issuing a purchase order.

6.0 METHOD OF AWARD - Proposals will be evaluated based on “best value” to the city. Proposals that receive less than 50% of the total available points, excluding price points, will not be considered for award.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 15 of 19

7.0 EVALUATION FACTORS

To be considered, the Proposer must submit a complete Proposal by the stated deadline and in accordance with all Proposal requirements. All required documentation must be included for evaluation.

Proposals that meet these requirements will be evaluated based on the criteria listed below.

7.1 Small Business – up to 20 points

7.2 Cost – up to 15 points

7.3 Qualifications & Company Experience – up to 20 points

7.4 Staffing, Supervisors, and Project Managers – up to 15 points

7.5 Capacity & Service Delivery – up to 15 points

7.6 Past Performance/ References – up to 15 points

8.0 PRICING STRUCTURE

• Please reference bid table (BT-29DH) for detailed pricing structure.

9.0 CONTRACT AWARD PROCESS

9.1 The Purchasing Division will facilitate and manage the evaluation process.

9.2 An Evaluation Panel consisting of representatives from various City departments and City consultants may be appointed to review and evaluate RFP responses in accordance with this RFP. City reserves the right at its sole discretion to include additional representatives at any point during the evaluation.

9.3 The Evaluation Committee will evaluate responses and may select Proposer for onsite interviews, presentations or demonstrations.

9.4 At its sole discretion, the City may request Best and Final Offers (BAFO) from proposers whose proposals are deemed most advantageous. Contract negotiations will be based on the BAFO

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 16 of 19 submissions.

9.5 The City reserves the right to negotiate all elements that comprise the successful Proposer’s response to ensure that the best possible consideration be afforded to all concerned.

9.6 The City reserves the right to shortlist firms based upon scores/ratings received during the evaluation process.

9.7 The City will notify all proposers in writing of the outcome once an award determination has been made.

10.0 PROPOSAL FORMAT AND ATTACHMENTS

To facilitate and expedite the evaluation process, Proposals should adequately address all evaluation factors and include the following list of required items that will be used as part of the evaluation. A Proposal may be deemed to be non-responsive and may be disqualified, at the City’s discretion, if the Proposal fails to comply with the following instructions.

10.1 Proposal Format Requirements

10.1.1 Proposal format shall be in font no smaller than 12 point, 8.5-inch by 11-inch paper size, with one-inch margins and single-spaced for the entire submitted proposal.

10.1.2 All proposal sections shall be divided by submission titles. All pages within these sections shall be uniquely numbered for purposes of easy reference.

10.2 Response forms

10.2.1 Completed and signed RFP-04.

10.2.2 Completed and signed RFP-05.

10.2.3 Completed and signed RFP-06.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 17 of 19

10.2.4 Completed and signed RFP-07

10.2.5 Completed Bid Table (BT-29DH)

10.3 Technical Response

10.3.2 List of Exceptions/Substitutions/Clarifications/Additions

10.3.2.1 Although the Scope of Services included Project

Requirements of the solicitation represents the City’s anticipated needs, there may be instances in which it is in the City’s best interest to permit exceptions to requirements and accept proposed alternatives.

10.3.2.2 If no exceptions are taken, please include a single

document stating “No Exceptions taken” in the required section.

10.3.2.3 It is extremely important for the Proposer to make

clear where exceptions, clarifications substitutions and/or additions to the Scope of Services, Draft Vendor Service Agreement and General Terms and Conditions are taken and how substitutions shall be provided. The city does not recognize strikeouts, deletions, or changes to Solicitation documents. Therefore, exceptions, conditions, clarifications and/or substitutions to the provisions of the city’s requirements must be clearly identified along with the proposed addition or modification. If the Proposer does not make it clear that an addition, exception or clarification is taken, the City shall assume the Proposer is responding to and shall meet the City’s stated requirements.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 18 of 19

10.3.2.4 Identify each exception, clarification, substitution and/or addition by specifically referencing the page number, section number, subsection number, item number or letter, and, if necessary, paragraph, or line number.

10.3.2.5 Identify each item clearly as an addition, exception, clarification or substitution. It is not necessary to include the entire text of a particular section or subsection. However, for ease of reference, Proposers may use portions of the solicitation’s text, if helpful in explanation.

10.3.2.6 For substitutions/clarifications, provide an

explanation of the difference between what the solicitation requests and what is proposed. The city is open to other means of accomplishing the requested Work. Proposers must explain why they believe their method of accomplishing the Work is equal to or better than that specified by the City.

10.3.2.7 For any addition(s) proposed or exception(s) taken, provide a rationale in as much detail as possible.

10.3.2.8 Begin responses to the major sections of the

solicitation on a new page.

10.3.2.9 The City shall consider the number and substance

of alterations to the City’s stated requirements as a factor in determining the most advantageous response.

RFP Ref. #: 26-0336 Doc. Ref#: RFP-02 Page 19 of 19

10.3.3 Pricing

10.3.3.1 Proposal pricing shall be assembled and presented

in accordance with the format and instructions of this solicitation.

SMALL BUSINESS PROGRAM – The City of Fort Worth has established a 30% Small Business (SB) participation goal for this solicitation. This goal reflects the City’s determination that certified Small Business Firms are available to provide the goods and/or services required under this bid. Accordingly, at least 30% of the total awarded contract value must be subcontracted or spent with a certified Small Business Firm. All provisions and requirements outlined in City Ordinance No.

27832-08-2025 apply to this solicitation. Bidders are required to submit the following documentation with their proposal:

a. Small Business Utilization form V1 (RFP-05), detailing how the Small

Business goal will be achieved.

b. Current Small Business Certification issued by a certifying entity approved by the City Manager.

File details come from the government source that posted it. Updated .