5-RFP-02-Scope of Services.pdf
PDF 255 KB Posted
- Attached to
- RFP HVAC Services and Related Items
- Solicitation number
- 27-0033
- Issued by
- Tarrant County, Texas
About this file
This is a Scope of Services document for a Request for Proposals (RFP) issued by the City of Fort Worth Purchasing Division for HVAC Services and Related Items under RFP Ref. #27-0033. The City of Fort Worth Water Department seeks to establish a non-exclusive, on-call annual agreement with qualified vendors for the purchase and delivery of heating, ventilation, and air conditioning equipment, original equipment manufacturer replacement parts, components, accessories, consumable supplies, and related incidental services including startup, commissioning, and functional testing. The solicitation covers equipment from multiple manufacturers including Carrier, Lennox, Trane, Temptrol, Johnson Controls International/York, LG, Toshiba, Greenheck, and Samsung VRF. Services shall be performed on an as-needed basis across all City locations. The initial contract term is four years with two one-year renewal options, unless either party provides notice of non-renewal at least 90 days before expiration. The City will issue Purchase Orders prior to work commencement, and the contractor must coordinate all service activities with the City's designated representative.
Contractor qualifications require a minimum of five consecutive years in business maintaining and repairing HVAC systems, at least three full-time qualified technicians with five years' experience servicing commercial and industrial HVAC systems, current Texas State Licensing and Regulation Department licenses, and City of Fort Worth Mechanical Licenses for all assigned employees. The evaluation methodology utilizes a "best value" approach with proposals scored on cost (up to 30 points), small business participation (up to 20 points), ability to meet City needs (up to 20 points), qualifications and experience (up to 10 points), and ability to provide required equipment and parts (up to 20 points). The City has established a 30 percent Small Business participation goal, requiring that at least 30 percent of the total awarded contract value be subcontracted or spent with certified Small Business Firms. Pricing shall be firm-fixed based on specified labor rates, with all costs including transportation, travel, fuel, certification fees, and disposal fees included in unit prices and no additional charges permitted.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4-RFP-06-Small Business Utilization Form V1.docx | DOCX document | |
| 1-RFP-05-Forms.pdf | ||
| 3-RFP-03-Draft Vendor Services Agreement.pdf | ||
| 2-RFP-01-Instruction to Proposers (1).pdf | ||
| 7-RFP-07-Deviations.xlsx | XLSX spreadsheet | |
| 6-RFP-04-Authorized Signature and Questionnaire..pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CITY OF FORT WORTH - PURCHASING DIVISION
SCOPE OF SERVICES
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 1 of 20 RFP Title: HVAC Services and Related Items
1.0 INTRODUCTION AND PURPOSE
The purpose of this solicitation is to establish an annual agreement with qualified vendors for the purchase and delivery of heating, ventilation, and air conditioning (HVAC) equipment, original equipment manufacturer (OEM) replacement parts, components, accessories, consumable supplies, and related incidental services as startup, commissioning, and functional testing of newly installed HVAC equipment on an as-needed basis.
1.1 The initial term of this agreement will be four (4) years with two (2) one (1) year renewal options, unless City or Supplier provides the other party with notice of non-renewal at least 90 days before the expiration of the initial term or renewal periods.
2.0 BACKGROUND
The City of Fort Worth Water Department (“City”) is seeking proposals from qualified firms (“Contractor”) to establish non-exclusive, on-call contracts for plumbing, electrical, and general labor services. Services shall be performed on an as-needed basis in accordance with the requirements outlined in this Scope of Work.
2.1 The City shall provide scope and location details.
2.2 The City shall issue Purchase Orders prior to work.
2.3 Review and approve quotes and completed work.
3.0 CONTRACTOR REQUIREMENTS FOR BID EVALUATION
3.1 Contractor shall have been in business at least five (5) consecutive years maintaining and repairing HVAC systems.
3.2 Contractor shall have at least three (3) full-time, qualified technicians with a minimum of five (5) years' experience servicing commercial and industrial HVAC systems.
3.3 Contractor shall have current licenses issued by the Texas State Licensing and Regulation Department with required endorsements, and/or City of Fort Worth Mechanical Licenses for all employees assigned to this contract.
3.4 Technicians shall be trained and certified to perform tear-downs, RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 2 of 20 annual preventive maintenance, and repairs on HVAC equipment including centrifugal, screw, reciprocating compressors, chillers, cooling towers, and walk-in coolers of all major brands.
4.0 DEFINITIONS
4.1 Department Contract Manager – A City employee assigned to manage contract compliance and oversight.
4.2 Designee – A City employee assigned by the Department Contract
Manager to assist in contract administration.
4.3 Quarterly Maintenance – Maintenance completed each quarter in accordance with the City's fiscal year.
4.4 Specialty Equipment – Includes cranes, scissor lifts, aerial equipment.
4.5 Expedited Repair Service – Applies when a chiller system is operating at half capacity or there is a threat to safety, health, or property;
includes emergency restoration following catastrophic events.
Four-hour response required.
4.6 VSD Unit – Variable Speed Drive Unit
5.0 CONTRACTOR RESPONSIBILITIES
5.1 Contractor shall provide new, unused, current production products that meet or exceed original manufacturer specifications or approved equivalent, unless otherwise specified by the City.
5.2 All services performed under this agreement will be scheduled and completed in a manner that minimizes disruption to normal City facility operations. The Contractor will coordinate service activities with the City’s designated representative prior to performing work.
5.3 When requested by the City, the Contractor will provide
troubleshooting, diagnostic assistance, startup, commissioning, functional testing, technical support, and manufacturer warranty support for HVAC equipment furnished under this contract.
5.4 The Contractor will provide the City with access to an online parts catalog and ordering platform. If available, mobile application access will be provided for multiple authorized City users to facilitate product identification, product availability, product pricing, and order tracking.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 3 of 20
5.5 The Contractor should maintain sufficient inventory or distribution capabilities to provide requested HVAC equipment, OEM replacement parts, and related supplies in a timely manner.
5.6 Equipment Replacement Beyond Economic Repair (BER): If, during troubleshooting, diagnostic assistance, or repair services, the Vendor determines that an HVAC unit is unable to be repaired—or if the cost of the repair exceeds the economic value of the equipment—the Vendor shall submit a written assessment to the City’s designated representative.
5.7 Upon written authorization from the City and the City issued purchase order, the Vendor shall provide, deliver and install a new, unused replacement unit, compatible with the existing system in both software and hardware, under the equipment terms and pricing established in this agreement.
5.8 Contractor shall provide competent supervision at all times.
5.9 Contractor or a fully authorized representative must be immediately available during work activities to receive instructions.
5.10 This contract shall not cover new installations requiring stamped drawings or boiler systems.
5.11 All services shall be performed to minimize interference with normal facility operations.
5.12 Contractor shall ensure work is inspected by proper officials upon completion.
5.13 Contractor shall perform three (3) maintenance inspections and one
(1) annual inspection each year.
5.14 Contractor shall be available 24/7 for repair services.
5.15 Contractor shall invoice the City over twelve (12) months for maintenance and inspection costs.
5.16 Contractor must obtain all required permits.
5.16.1 Permit cost markups are prohibited.
5.16.2 Contractors’ registration information shall be available at the
City’s website.
5.16.3 Contractor shall submit proof of Contractor Registration or application.
5.17 Contractor shall comply with all EPA, OSHA, and City safety regulations.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 4 of 20
5.18 Contractors’ employees shall wear identification badges at all times.
5.19 Contractor shall avoid blocking traffic or creating safety hazards and use proper warning devices.
5.20 Contractor shall mitigate corrosive effects of hydrogen sulfide where applicable.
5.21 Contractor shall correct or restore all defective work or damage caused by operations.
5.21.1 Contractor shall correct defects due to faulty material or workmanship for one (1) year following final acceptance.
5.22 Contractor shall remove all waste and leave work areas clean.
5.23 Contractor shall comply with all applicable laws and regulations, including new mandates that arise during the agreement.
5.24 Failure of the City to enforce provisions does not waive future enforcement.
6.0 VENDOR QUALIFICATIONS AND TECHNICAL SUPPORT
6.1 The Contractor shall be authorized by the manufacturer to sell and provide technical support items/services purchased under this agreement.
6.2 Proposers shall submit manufacturer authorization letters that include regions in which product may be sold or if manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, vendor will submit a written explanation that the company is the manufacturer of the product line(s) proposed.
6.3 Proposers shall submit copies of licenses from the Texas License and Regulations with bid response. Proposers shall submit proof of all licenses required to perform the proposed installation and repair services. For services performed in Texas, proposers must provide a copy of their current license issued by the Texas Department of Licensing and Regulation (TDLR). For services performed outside Texas, proposers must provide a copy of the applicable license(s) issued by the appropriate regulatory authority in the state(s) where services will be performed. Any proposer claiming that no license is required must submit a written justification supporting that claim.
6.4 their assertion.
6.5 Technical support may include, but it not limited to:
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 5 of 20
6.5.1 Remote Troubleshooting
6.5.1.1 Phone, video, or email assistance for on-site
technicians diagnosing system error.
6.5.2 Diagnostic Guidance
6.5.2.1 Help interpreting error codes, wiring diagrams, and
system performance data.
6.5.3 Response Time Commitments
6.5.3.1 The Contractor shall respond to City requests for
remote technical support by telephone or email withing 2 hours of City’s request.
6.5.3.2 When on-site technical support is requested, The
Contractor shall provide an on-site technician withing twenty-four (24) hours of the City’s request, unless otherwise agreed upon by the City.
6.5.3.3 The Contractor shall have a minimum of three (3)
years experience in the sale and distribution of HVAC equipment, parts, and supplies, and in providing HVAC repair and technical support services.
7.0 MAINTENANCE INSPECTIONS
7.1 Chiller Systems
7.1.1 Contractor shall complete quarterly inspections as follows:
7.1.1.1 Quarter 1 (October–December)
7.1.1.1.1 Work with City building Engineer on chiller
operations.
7.1.1.1.2 Investigate Engineer-reported problems.
7.1.1.1.3 Test run and record readings.
7.1.1.1.4 Determine purge rate
7.1.1.1.5 Compare readings to baseline
7.1.1.2 Quarter 2 (January–March)
7.1.1.2.1 Work with City Engineers
7.1.1.2.2 Investigate issues
7.1.1.2.3 Pull oil samples for lab testing
7.1.1.2.4 Test run and record readings
7.1.1.2.5 Determine purge rate
7.1.1.2.6 Compare readings to baseline
7.1.1.3 Quarter 3 (April–June)
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 6 of 20
7.1.1.3.1 Work with City Engineer
7.1.1.3.2 Investigate issues
7.1.1.3.3 Test run and record readings
7.1.1.3.4 Determine purge rate
7.1.1.3.5 Compare readings with previous annual
baseline
7.1.2 Contractor shall advise City Engineer immediately following inspections.
7.1.3 Contractor shall provide a detailed inspection report within five
(5) business days.
7.1.4 Maintenance inspections shall occur Monday–Friday, 8 AM–5
PM.
7.2 HVAC Systems
7.2.1 Inspections shall be performed as needed.
7.2.2 Contractor shall:
7.2.2.1 Clean condenser coils
7.2.2.2 Check/clean evaporator coils
7.2.2.3 Check/clean drain pans
7.2.2.4 Blow out drain lines
7.2.2.5 Record refrigerant pressures
7.2.2.6 Record evaporator air temperatures
7.2.2.7 Replace belts as needed
7.2.2.8 Replace pulleys as needed
7.2.2.9 Record condenser fan amperage
7.2.2.10 Check compressor amperage
7.2.2.11 Inspect indoor blower wheels
7.2.2.12 Check thermostat operation
7.2.2.13 Inspect compressor contactors
7.2.2.14 Clean grills
7.2.2.15 Oil motors as needed
7.3 Cooling Tower Systems
7.3.1 Inspections shall be performed as needed.
7.3.2 Contractor shall:
7.3.2.1 Inspect mechanical features
7.3.2.2 Inspect makeup valve
7.3.2.3 Inspect for unusual noise/vibration
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 7 of 20
7.3.2.4 Clean air inlet
7.3.2.5 Clean PVC drift eliminator
7.3.2.6 Clean distribution basin
7.3.2.7 Clean motor exterior
7.3.2.8 Inspect Gear Reducer Drive
7.3.2.8.1 Check oil leaks
7.3.2.8.2 Check oil levels
7.3.2.9 Inspect lube lines
7.3.2.10 Operate motor three hours
7.3.2.11 Inspect Marley HC valves
7.3.2.12 Change reducer oil
7.3.2.13 Open vent in reducer
7.3.2.14 Inspect driveshaft and coupling
7.3.2.15 Lubricate fan shaft
7.3.2.16 Check drive belt tension
7.3.2.17 Tighten fan blade fasteners
7.3.2.18 Inspect fan cylinder fasteners
7.3.2.19 Inspect basin heater sensor
7.3.2.20 Inspect structure fasteners
7.4 Walk-In Coolers
7.4.1 Inspections as needed per manufacturer.
7.4.2 Contractor shall:
7.4.2.1 Visual inspection
7.4.2.2 Clean evaporator coils
7.4.2.3 Check fan operation
7.4.2.4 Inspect wiring/components
7.4.2.5 Check refrigeration cycle
8.0 ANNUAL INSPECTIONS
8.1 Chiller Systems
8.1.1 Annual inspections occur July–September 15.
8.1.2 Contractor shall:
8.1.2.1 Work with City Engineer
8.1.2.2 Investigate issues
8.1.2.3 Change oil and filter
8.1.2.4 Provide oil analysis
8.1.2.5 Replace filters/strainers
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 8 of 20
8.1.2.6 Remove head, brush condenser tubes
8.1.2.7 Clean VSD heat exchanger
8.1.2.8 Inspect VSD units
8.1.2.9 Log baseline data
8.1.2.10 Perform vibration analysis
8.1.2.10.1 Notify City if additional testing needed
8.1.2.11 Determine purge rate
8.1.2.12 Perform leak test
8.1.2.13 Test flow control switches
8.2 HVAC Systems
8.2.1 Annual inspections as needed.
8.2.2 Tasks include all items listed in Section 6.2 plus checking heat exchanger.
8.3 Cooling Tower Systems
8.3.1 Annual inspections as needed.
8.3.2 Tasks include all tasks listed in Section 6.3.
8.4 Walk-In Coolers
8.4.1 Annual inspections as needed.
8.4.2 Tasks include all in Section 6.4 plus:
8.4.2.1 Submit oil sample
8.4.2.2 Inspect suction accumulator
8.5 Inspections shall be performed during regular hours.
8.6 Contractor shall advise City Engineer immediately after inspections.
8.7 Contractor shall provide detailed reports within five business days.
9.0 HVAC EQUIPMENT AND SUPPLIES
9.1 The vendor will furnish HVAC equipment, OEM replacement parts, components, accessories, and related HVAC products, including, but are not limited to:
9.1.1 Air handlers
9.1.2 Air conditioning units
9.1.3 Chillers
9.1.4 Walk-In Coolers
9.1.5 Rooftop/package units
9.1.6 Ductless equipment
9.1.7 Heat pumps
9.1.8 Ducting/Air sealants
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 9 of 20
9.1.9 Evaporator coils
9.1.10 Compressors
9.1.11 Motors
9.1.12 Capacitors
9.1.13 Contactor
9.1.14 Relays
9.1.15 Transformers
9.1.16 Circuit boards
9.1.17 Controllers
9.1.18 Thermostats
9.1.19 Sensors
9.1.20 Actuators
9.1.21 Fan blades
9.1.22 Blowers
9.1.23 Heat exchangers
9.1.24 Expansion valves
9.1.25 Filter driers
9.1.26 Refrigerants
9.1.27 Refrigeration oils
9.1.28 Condensate pumps
9.1.29 Economizers
9.1.30 Heater kits
9.1.31 Hail guards
9.1.32 Miscellaneous OEM replacement parts, accessories, and trade specific tools
9.1.33 Kitchen Captive Air
9.2 The City operates HVAC equipment and systems from multiple manufacturers. Manufacturers currently represented within the City’s HVAC equipment inventory include, but are not limited to, the following:
9.2.1 Carrier
9.2.2 Lennox
9.2.3 Trane
9.2.4 Temptrol
9.2.5 Johnson Controls International/York
9.2.6 LG
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 10 of 20
9.2.7 Toshiba
9.2.8 Greenheck
9.2.9 Samsung VRF
9.3 The Vendor will be capable of furnishing OEM replacement parts, equipment, accessories, service tools, and related HVAC supplies compatible with the City’s existing HVAC systems.
10.0 HVAC SERVICE TOOLS AND EQUIPMENT
10.1 HVAC service tools, including but not limited to:
10.1.1 Refrigerant gauges
10.1.2 Vacuum pumps
10.1.3 Meters
10.1.4 Refrigerant recovery tools
11.0 SELL BACK
11.1 Refrigerant recovery cylinder exchange and refrigerant reclamation or buy-back services, when available and requested by the City.
11.2 The Vendor will accept recovered refrigerant that has been removed from HVAC equipment by City personnel and contained in an approved recovery cylinder. Recovered refrigerant may include refrigerant that is no longer suitable for reuse due to contamination or equipment repair requirements.
11.3 The Vendor will provide recovery cylinder exchange and properly reclaim, recycle, or dispose of recovered refrigerant in accordance with applicable federal, state, and local requirements.
11.4 Refrigerant buy-back will be priced based on the weight of refrigerant accepted by the Vendor. The Vendor will provide documentation identifying the weight and applicable buy-back amount.
11.5 Refrigerants may include, but are not limited to, the following:
11.5.1 R-22
11.5.2 R-410A
11.5.3 R-454B
11.5.4 R-32
12.0 LABOR AND ON-SITE TECHNICAL SUPPORT
12.1 When requested by the City, the Vendor will provide on-site technical support and licensed HVAC labor in accordance with the applicable service hours and rates established under this agreement.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 11 of 20
12.2 On-Site Technical Support – Regular Hours: Monday through Friday 7:00 am to 3:00 pm
12.3 Labor, Hourly Rate, Licensed HVAC Laborer, Monday through Friday 8:00 am to 5:00 pm
12.4 Labor, After Hours Hourly Rate, Licensed HVAC Laborer, Monday through Friday 5:01 pm to 7:59 am
12.5 Labor, Holiday/Weekend Hourly Rate, Licensed HVAC Laborer, Weekends, City Observed Holidays
13.0 DELIVERY OR PICKUP
13.1 Materials may be picked up by authorized City personnel or delivered to a City’s designated delivery location at 5001 James Avenue, Fort Worth, Texas 76115, unless otherwise specified by the City designee at the time of order.
13.2 If delivery is requested, deliveries will need to be made during the City’s normal business hours, 7:00 am to 3:00 pm, Monday through Friday.
13.3 The Vendor will coordinate all deliveries with City designated representative and provide estimated delivery dates and delivery windows prior to shipment.
13.4 If delivery requires specialized unloading equipment or other special delivery arrangements, the Vendor will notify the City a minimum of two (2) business days prior to delivery to allow the City adequate time to coordinate receiving operations.
14.0 MAINTENANCE AND INSPECTION REPORTS
14.1 Contractor shall submit reports within five business days.
14.2 Reports shall include:
14.2.1 Equipment performance
14.2.2 Necessary repairs
14.2.3 Recommended improvements
14.2.3.1 All recommended repairs must include a proposal:
14.2.3.1.1 Description of work
14.2.3.1.2 Parts to be provided
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 12 of 20
14.2.3.1.3 Itemized materials and markup
14.2.3.1.4 Equipment rental estimate
14.2.3.1.5 Labor costs and classifications
14.2.3.1.6 Proposed schedule
15.0 REPAIR SERVICES
15.1 Contractor shall perform all work needed for proper equipment operation.
15.2 Repairs must meet all applicable codes.
15.3 Repairs must meet current industry standards.
15.4 Contractor shall not begin work without a Purchase Order.
15.5 Contractor shall identify needed repairs within eight hours unless exceptions apply.
15.6 Contractor shall notify City before renting large equipment.
15.6.1 No markups allowed on rental costs.
16.0 EXPEDITED/EMERGENCY SERVICES
16.1 Contractor must provide 24-hour response.
16.2 City determines emergency status.
16.3 Contractor must acknowledge within two hours and be onsite within four hours.
16.4 Expedited service may include after-hours or holidays.
16.5 Contractor shall complete all necessary work to restore service.
16.6 Rental equipment requires written approval.
16.6.1 No markups allowed.
16.7 Emergency services shall continue until full service restored.
17.0 MISCELLANEOUS SERVICES
17.1 Other services may be requested by City.
17.2 Work must be authorized in writing.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 13 of 20
17.3 Contractor shall comply with all provisions of this Agreement.
18.0 HOURS OF SERVICE
18.1 Regular Hours: 8:00 AM – 5:00 PM Monday–Friday
18.2 After-Hours: 5:01 PM – 7:59 AM Monday–Thursday
18.3 Weekend Hours: 5:01 PM Friday – 7:59 AM Monday
18.4 Holiday Hours include all City-observed holidays.
19.0 PARTS REQUIREMENTS
19.1 All parts shall be new and compliant with regulations.
19.2 Contractor shall supply parts in sufficient quantity.
19.3 No diluted or altered products allowed.
19.4 Contractor responsible for all parts used.
19.5 City may supply parts from existing agreements.
20.0 EQUIPMENT REQUIREMENTS
20.1 Contractor shall provide equipment required for services.
20.1.1 No rental mark-ups allowed.
20.2 All equipment shall meet OSHA standards.
20.3 Contractor shall protect City property and may be liable for damages.
21.0 DISPOSAL OF MATERIALS
21.1 Contractor shall handle, transport, and dispose of materials per law.
21.2 Contractor shall recycle where appropriate.
21.3 Contractor is responsible for any hazardous materials brought onsite.
21.4 Contractor shall notify City immediately if hazardous materials are encountered.
21.5 Contractor shall provide disposal manifests within ten days when requested.
22.0 CONTRACTOR LABOR AND PERSONNEL
22.1 Contractor responsible for employee safety.
22.2 Contractor shall comply with OSHA regulations and reporting.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 14 of 20
22.3 Only authorized personnel allowed onsite.
22.4 Contractor shall maintain professionalism and site cleanliness.
22.5 Damages caused by Contractor shall be repaired at Contractor expense.
22.6 Contractor shall coordinate site access, utilities, and safety measures.
22.7 Contractor shall designate a Single Point of Contact (SPOC).
22.7.1 SPOC shall be available 24 hours.
22.7.2 SPOC shall supervise employees.
22.7.3 A qualified designee may be appointed when necessary.
23.0 WORK PERFORMANCE
23.1 Contractor shall be responsible for performance of all work.
Performing services on an as-needed basis for all City locations.
23.2 Providing all maintenance manuals for installations and/or repairs.
23.3 Ensuring work is completed and/or supervised by a licensed HVAC
Technician(s).
23.4 Ensuring repair and replacement work is completed in accordance with all current Federal, State and local laws, City ordinances, rules and regulations.
23.5 Ensuring all work is completed in strict accordance to industry standards.
23.6 Securing the area for Contractor employee, City employee and general public safety
24.0 METHOD OF AWARD - Proposals will be evaluated based on “best value” to the City. Proposals that receive less than 50% of the total available points, excluding price points, will not be considered for award.
25.0 EVALUATION FACTORS
To be considered, the Proposer must submit a complete Proposal by the stated deadline and in accordance with all Proposal requirements. All required documentation must be included for evaluation.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 15 of 20
Proposals that meet these requirements will be evaluated based on the criteria listed below.
25.1 Cost – up to 30 points available
25.1.1 Documents used to evaluate this will include: Bid Table
25.2 Small Business Participation up to 20 points available
25.2.1 Documents used to evaluate this will include RFP-06 Small Business Utilization Form
25.3 Ability to Meet the City’s needs– up to 20 points available
25.3.1 Documents used to evaluate this will include: RFP-04.
25.4 Qualifications and Experience– up to 10 points available
25.4.1 Documents used to evaluate this will include RFP-04.
25.5 Ability to provide the required equipment and parts up to 20 points available
25.5.1 Documents used to evaluate this will include: Bid Table
26.0 PRICING STRUCTURE
26.1 Provide a written firm-fixed price proposal, based on the labor rates listed on the Bid Solicitation. The firm fixed price proposal shall include.
26.1.1 Description of the work to be performed.
26.1.2 Itemized estimate of the parts and materials, including manufacturer’s list price discount.
26.1.3 Timeline including proposed start and finish dates.
26.2 Understand that the submission of a firm fixed price proposal is evidence that the Contractor has familiarized himself/herself with the nature and extent of the work and any local conditions that may, in any manner, affect the scope of the work to be done, and the equipment, materials, labor, etc. required. No variation in price or conditions shall be permitted based on the claim of ignorance, negligence, or false representation.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 16 of 20
26.3 Contractor shall understand that if alternative products are available to meet the sustainability goals of the City, these shall be submitted with the Contractor’s quote as an additional or alternative firm fixed price quotation.
26.4 The Contractor shall immediately notify the Department Project Manager or designee in writing (by email) if additions, deletions, and/or revisions to a job assignment are needed.
26.5 Within one (1) business day of notification, the Contractor shall submit a written Project Quotation Change Request to the Department Project Manager or designee. The City reserves the right to reject any changes to the project firm fixed price quotation requested by the Contractor. Under no circumstances shall Contractor proceed with changes to the project firm fixed price quotation without approval from the Department Project Manager or designee. The Project Quotation Change Request shall include the following:
26.5.1 A description of the change or addition in the work and the reason for the change/addition, explaining the benefits of the change/addition.
26.5.2 The adjustment in the project time, if applicable.
26.6 If the City requests to change a fixed-price proposal due to a change in the scope of work that would increase the number of labor hours required or the amount of materials required, the Contractor shall amend the original amount and, upon approval and acceptance by the Department Project Manager, of the amended fixed-price quote, shall be reimbursed for the changes.
26.7 Unit prices will include all costs associated with the specified work, including, but not limited to: transportation and travel charges, loading charges, fuel charges, certification fees, shop fees, miscellaneous fees, environmental/hazardous disposal fees, and unspecified costs. NO ADDITIONAL CHARGES WILL BE
ACCEPTED OR PAID BY THE CITY.
27.0 CONTRACT AWARD PROCESS
27.1 The Purchasing Division will facilitate and manage the evaluation process.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 17 of 20
27.2 An Evaluation Panel consisting of representatives from various City departments and City consultants may be appointed to review and evaluate RFP responses in accordance with this RFP. City reserves the right at its sole discretion to include additional representatives at any point during the evaluation.
27.3 The Evaluation Committee will evaluate responses and may select Proposer for onsite interviews, presentations or demonstrations.
27.4 At its sole discretion, the City may request Best and Final Offers (BAFO) from proposers whose proposals are deemed most advantageous. Contract negotiations will be based on the BAFO submissions.
27.5 The City reserves the right to negotiate all elements that comprise the successful Proposer’s response to ensure that the best possible consideration be afforded to all concerned.
27.6 The City reserves the right to shortlist firms based upon scores/ratings received during the evaluation process.
27.7 The City will notify all proposers in writing of the outcome once an award determination has been made.
28.0 PROPOSAL FORMAT AND ATTACHMENTS
28.1 To facilitate and expedite the evaluation process, Proposals should adequately address all evaluation factors and include the following list of required items that will be used as part of the evaluation. A Proposal may be deemed to be non-responsive and may be disqualified, at the City’s discretion, if the Proposal fails to comply with the following instructions.
28.2 Proposal Format Requirements
28.2.1 Proposal format shall be in font no smaller than 12 point, 8.5-inch by 11-inch paper size, with one inch margins and single-spaced for the entire submitted proposal.
28.2.2 All proposal sections shall be divided by submission titles.
All pages within these sections shall be uniquely numbered for purposes of easy reference.
28.3 Response forms
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 18 of 20
28.3.1 Completed and signed RFP-04 Authorized Signature and
Questionnaire.
28.3.2 Completed and signed RFP-05 Forms.
28.3.3 Completed and signed RFP-06 Small Business.
28.3.4 Completed and signed RFP-07 Deviations.
28.3.5 Completed Discount (%) (BT-68WY)
28.3.6 Completed Bid Table (BT-48AN)
28.3.7 Copy of Current Catalog
28.3.8 Technical Response
28.3.9 Submit proof of experience with the RFP.
28.3.10 List of
Exceptions/Substitutions/Clarifications/Additions
28.3.10.1 Although the Scope of Services included Project
Requirements of the solicitation represents the City’s anticipated needs, there may be instances in which it is in the City’s best interest to permit exceptions to requirements and accept proposed alternatives.
28.3.10.2 If no exceptions are taken, please include a single document stating “No Exceptions taken” in the Required section.
28.3.10.3 It is extremely important for the Proposer to make
clear where exceptions, clarifications substitutions and/or additions to the Scope of Services, Draft Contractor Service Agreement and General Terms and Conditions are taken and how substitutions shall be provided. The City does not recognize strikeouts, deletions, or changes to Solicitation documents. Therefore, exceptions, conditions, clarifications and/or substitutions to the provisions of the City’s requirements must be clearly identified along with the proposed addition or modification. If the Proposer does not make it
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 19 of 20 clear that an addition, exception or clarification is taken, the City shall assume the Proposer is responding to and shall meet the City’s stated requirements.
28.3.10.4 Identify each exception, clarification, substitution and/or addition by specifically referencing the page number, section number, subsection number, item number or letter, and, if necessary, paragraph, or line number.
28.3.10.5 Identify each item clearly as an addition, exception, clarification or substitution. It is not necessary to include the entire text of a particular section or subsection. However, for ease of reference, Proposers may use portions of the solicitation’s text, if helpful in explanation,
28.3.10.6 For substitutions/clarifications, provide an
explanation of the difference between what the solicitation requests and what is proposed. The City is open to other means of accomplishing the requested Work. Proposers must explain why they believe their method of accomplishing the Work is equal to or better than that specified by the City.
28.3.10.7 For any addition(s) proposed or exception(s)
taken, provide a rationale in as much detail as possible.
28.3.10.8 Begin responses to the major sections of the
solicitation on a new page.
28.3.10.9 The City shall consider the number and substance
of alterations to the City’s stated requirements as a factor in determining the most advantageous response.
RFP Ref. #: 27-0033 Doc. Ref#: RFP-02 Page 20 of 20
28.3.11 Pricing
28.3.11.1 Proposal pricing shall be assembled and presented
in accordance with the format and instructions of this solicitation.
29.0 SMALL BUSINESS PROGRAM – The City of Fort Worth has
established a 30% Small Business (SB) participation goal for this solicitation. This goal reflects the City’s determination that certified Small Business Firms are available to provide the goods and/or services required under this bid. Accordingly, at least 30% of the total awarded contract value must be subcontracted or spent with a certified Small Business Firm. All provisions and requirements outlined in City Ordinance No. 27832-08-2025 apply to this solicitation. Bidders are required to submit the following documentation with their proposal:
29.1 Small Business Utilization form V1 (RFP-06), detailing how the Small Business goal will be achieved.
29.2 Current Small Business Certification issued by a certifying entity approved by the City Manager.
File details come from the government source that posted it. Updated .