481544 AES FFE Package .pdf

JB Andrews , MD

Aeromedical Evacuation Squadron Training and Administration Facility

FY 20 P2 481544

US Army Corps of Engineers

Louisville District

Destroy 10 years after construction

Furniture Fixtures & Equipment

TABLE OF CONTENTS

Narrative of Design Objective 1

POC List 2

Furniture Legend 3

Furniture Order Forms 4

Room Contents List 5

Itemized Furniture Cost Estimate 6

Room Layouts 7

Overall Furniture Drawing 8

Furniture Finishes 9

Aeromedical Evacuation Squadron Training & Administration Facility

JB Andrews, MD

P2 481544 FY20

POC: Kristian Jolly 600 Dr. Martin Luther King, Jr. Place, Louisville, KY 40202 Phone: 502/315-6405

Aeromedical Evacuation Squadron

Training & Administration Building JB Andrews, MD

POC: Kristian Jolly 600 Dr. Martin Luther King, Jr. Place Louisville, KY 40202 Phone: 502/315-6405

NARRATIVE OF INTERIOR DESIGN OBJECTIVES

Narrative of Interior Design Objectives

Structural Interior Design for the Aeromedical Evacuation Squadron Training & Administration Building follows Air Force Reserve Command Comprehensive Interior Design Policy Manual.

ADA standards are addressed in all areas where required.

The Interior Design is an integrated part of the building’s complete design, expressing the user’s functional and aesthetic needs. Finish selections specified are of a quality and durability appropriate for the Aeromedical Evacuation Squadron Training & Administration Building. The design employs a variety of materials that contain high amounts of recycled content, products that can be easily recycled at the end of their useful life, as well as many rapidly renewable materials.

To maximize the light in the space the design uses highly light reflective vertical surfaces, including the walls and systems panel partitions. The furnishings for the facility will primarily consist of open office panel systems and benching that allow daylight to penetrate deep into the space. A light neutral color scheme will be employed to maximize solar reflectance.

Architectural finishes have a primarily neutral combination while drawing in the flooring to provide a functional yet warm and aesthetically pleasing environment. Subtle flooring patterns within the carpet layout, will add visual interest to the space. The overall interior design will convey a calming, comfortable and sophisticated space.

Doors are a medium warm tone to coordinate with the furnishings specified in the FF&E package. Walk-off carpet tile is in a dark tone to mask soiling. Restrooms include porcelain paver floor and wall tile. Solid HDPE plastic partitions are used for their durability, low maintenance and they resist graffiti, odors, moisture and mildew. Solid surface vanity countertops are used for the ease of maintenance and resilience of the product. Ceiling tiles and grid systems throughout the building are in a basic white finish for light reflectance.

Suspended gypsum ceilings and exposed structures are also in basic white.

Furniture finishes will coordinate with the space through the selection of warm, neutral finish colors and textiles. A combination of functional table and ergonomic seating provide the necessary products for a productive office and learning environment.

Finish selections are developed for an efficient, comfortable and professional environment.

Design selections have been developed to correspond with the Air Force Reserve Command Comprehensive Interior Design Policy Manual.

POINT OF CONTACT LIST

Project Manager:

Liz Hershner US Army Corps of Engineers 600 Dr. Martin Luther King Jr. Pl.

CELRL-PM-M

Elizabeth.M.Hershner@usace.army.mil 502-315-6974

Project Engineer/Architect:

Michael Barry US Army Corps of Engineers 600 Dr. Martin Luther King Jr. Pl.

CELRL-ED-T-C

michael.barry@usace.army.mil 502-315-6508

Interior Designer:

Kristian Jolly US Army Corps of Engineers 600 Dr. Martin Luther King Jr. Pl.

CELRL-ED-D-A

kristian.r.jolly@usace.army.mil 502-315-6405

Leah Deljoo US Army Corps of Engineers 600 Dr. Martin Luther King Jr. Pl.

CELRL-ED-D-A

leah.b.deljoo@usace.army.mil 502-315-6234

Aeromedical Evacuation Squadron Training & Administration Facility

JB Andrews, MD

POC: Kristian Jolly 600 Dr. Martin Luther King, Jr. Place, Louisville, KY 40202 Phone: 502/315-6405

CH1 TASK CHAIR, SOFT CASTER

CH2 FLIP / NESTING CHAIR

CH3 LOUNGE CHAIR

CH4 BREAK ROOM CHAIR

CH5 TASK CHAIR- HARD CASTERS

CH6 EXECUTIVE TASK CHAIR

CH7 GUEST/ SIDE CHAIR

CH8 CONFERENCE CHAIR ON CASTERS

CH9 STACKING CHAIR, WITH CUSHION

CT1 COMMON TOP

D8 U-SHAPED DESK WITH OVERHEAD STORAGE

D10 L-SHAPED DESK - NO OVERHEAD STORAGE

HD1 HIGH DENSITY STORAGE

LE1 MOBILE LECTERN

LF3 3H LATERAL FILE - 30" W

LF5 5H LATERAL FILE - 36"W

MW1 MICROWAVE (NIC)

R1 DESKSIDE RECYCLING BIN - 7 GALLON

RF1 REFRIGERATOR (NIC)

S1 OPEN SHELVING

T1 CONFERENCE TABLE

T2 BREAK ROOM TABLE

T3 FLIP TOP TABLE

T4 BENCHING TABLE

T5 GROUP TABLE

T6 ROUND OCCASIONAL TABLE

T7 TESTING TABLE

T8 STAINLESS STEEL WORK TABLE

T9 FIXED LEG TABLE

T10 FACILITATOR TABLE

T11 BENCHING TABLE WITH MOBILE PEDESTAL

TL3 TASK LIGHT

W1 WASTEBASKET - 7 GALLON

W2 WASTEBASKET LARGE - 23 GALLON

WB1 WORK BENCH

WS1 WORKSTATION 7'-6"" x 8'-0"

WS2 PART TIME WORKSTATION 8'-0" x 3'- 0 "

WS7 WORKSTATION 8'-0" X 6'-0"

WSR10 RECEPTION WORKSTATION

Aeromedical Evacuation Squadron Training & Administration Facility

JB Andrews, MD

P2 481544 FY20

POC: Kristian Jolly 600 Dr. Martin Luther King, Jr. Place, Louisville, KY 40202 Phone: 502/315-6405

TAG FURNITURE ITEM DESCRIPTION

FURNITURE LEGEND

TAG ROOM QTY

101 ADMINISTRATIVE OPEN OFFICE

CH1 2

CH5 16

R1 14

W1 14

WS1 12

WS2 2

WSR10 1

102 COMANDER OFFICE

CH6 1

CH7 2

D8 1

LF5 1

R1 1

W1 1

103 CEM OFFICE

CH6 1

CH7 2

D10 1

LF5 1

R1 1

W1 1

104 1st SGT

CH6 1

CH7 2

D10 1

LF5 1

R1 1

W1 1

ROOM CONTENTS LIST

Aeromedical Evacuation Squadron Training & Administration

JB Andrews, MD

105 DO OFFICE

CH6 1

CH7 2

D10 1

LF5 1

R1 1

W1 1

106 OFFICE

CH5 1

CH7 1

D10 1

LF5 1

R1 1

W1 1

107 LACTATION

CH3 2

R1 1

T6 1

W1 1

108 CONFERENCE

CH7 7

CH8 12

LE1 1

R1 1

T1 1

W1 1

109 AIR CREW TRAINING

CH1 22

CH2 8

CT1 1

LF3 2

R1 4

T4 20

T5 1

TL3 20

W1 4

WS7 2

110 NEWCOMERS ORIENTATION

CH1 8

CH2 8

R1 2

T4 8

T5 1

TL3 8

W1 2

111 CLINICAL/SAFETY/QUALITY TRAINING

CH1 22

CH2 8

CT1 1

LF3 2

R1 4

T4 20

T5 1

TL3 20

W1 4

WS7 2

112 OPS FLIGHTS OFFICES

CH1 18

CT1 1

LF3 2

R1 4

T11 16

TL3 16

W1 4

WS7 2

113 MEDICAL EQUIP & OPERATIONS STORAGE

WB1 1

114 AERG LOGISTICS

CH1 4

HD1 1

R1 2

T4 3

TL3 3

W1 2

WS7 1

115 MEDICAL EQUIP & OPERATIONS STORAGE

T8 1

116 STANDARD EVALUATIONS/TESTING

CH1 4

CH2 8

R1 1

T5 1

T7 4

TL3 4

W1 1

117 AER OIC SUPPORT AND READINESS

CH1 9

CT1 2

LF3 2

R1 2

T4 8

TL3 8

W1 2

WS7 1

W2

126 RECYCLE

S1 1

127 BREAK ROOM

CH4 12

T2 3

W2 1

128 AUDITORIUM

CH2 124

LE1 1

T3 16

T10 1

Furniture Specification Aeromedical Evacuation Squadron Training and Administration Facility JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH1 Task Chair, Soft caster

Description:

Highback task chair with die-cast aluminum frame with polished aluminum finish, standard cylinder, independently adjustable arms with 5” range, standard cushions, and five star base with hard cast-ers for carpeted floors. Chair shall be designed to fit 95% of the office population (5’0” - 6’4” height, 100 lbs to 300 lbs weight).

Chair shall have weight sensitive, self-locking recline mechanism with 20 degrees of movement, automatically pivoting backrest with seven- degree back tilt, and contoured cushions with waterfall edge to reduce pressure. Chair shall have modular components for easy replacement and maintenance.

*See Item Installation List for room locations

Basis of Design:

Finishes:

Seat: Grade 1 Vellum, Black

Back Mesh: Monofilament Stripe, Platinum

Frame: Chrome 3 with Black Trim

Dimensions:

27W x 25D x 39-43 H (Overall)

Cost:

GSA Unit Cost:

**Image not representative of product finish selections

Warranty:

Textiles, Cushions, & Arm Pads – Five years of single shift use; All other components – 15 years 24/7 use

Testing and Environmental:

Tested in compliance with ANSI/ BIFMA X5.1 General Pur-pose Office standards. Lightweight for minimal environmental impact. GREENGUARD Indoor Air Quality, GREENGUARD Gold and BIFMA level® 2 certified.

Alternate Manufacturers:

Allseating-You Highback

Steelcase– Think

Manufacturer: Humanscale

5675 DTC Blvd Suite 100, Greenwood Village,CO 80111

Model #: Liberty Chair- L11AM10V101

GSA Contract: FSC Group:

Part

SIN:

711-18

MOL

Exp. Date:

10/9/2022

Contract Number:

GS-29F-001N

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH1

Humanscale 101 2

Humanscale 109 22

Humanscale 110 8

Humanscale 111 22

Humanscale 112 18

Humanscale 114 4

Humanscale 116 4

Humanscale 117 9

Humanscale 121 1

Total 90

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH2 Flip/ Nesting Chair

Description:

Nesting, flip seat chair on casters. Chrome frame, black mesh back with polyurethane inserted arms and upholstered seat. The upholstery shall have a minimum of 170,000 double rubs and be bleach cleanable. Casters appropriate for carpet.

Frame: Chrome

Mesh Back: Black

Seat: Dolce, Jet 11927 70% Polyurethane 30% Ray-

on. Silvergaurd. 100,00 Double Rubs.

Dimensions:

24 W x 23 D x 35 H (Overall)

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Casters, foam, textiles– 5 years

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.1 General Pur-pose Office standards. .

Alternate Manufacturers:

Sit On It– Movi

National– Jiminy

Manufacturer: Kimball

Model #: K76CMUC1

GSA Contract: FSC Group:

SIN

711-19

MOL

200,000

Exp. Date:

12-19-2022

GS-03F-059DA

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH2

Flip/ Nest Chair Kimball Office 109 8

Flip/ Nest Chair Kimball Office 110 8

Flip/ Nest Chair Kimball Office 111 8

Flip/ Nest Chair Kimball Office 116 8

Total 32

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH3 Lounge Chair w/ Tablet Arm

Description:

Villa Lounge Chair with Plywood frame with lap-joint construction. Back cushions should be constructed of

21⁄2" highdensity, high-resiliency foam over a non-stretch woven suspension that is that is stapled to the frame. Arms tops and outside panels should have 3⁄4"-thick, high-grade polyurethane foam. Removable Seat cushions should be 31⁄2" high-density, high-resiliency slab foam over a webbed suspension. Laminate tablet arm and 4” arm caps arm caps with knife edge.

Upholstery: Network, 1561 Navy

Tablet Arm/ Cap: Wilsonart, Cloud 440, Leg:Square Leg, Silver Frost Metallic Dimensions:

32 1/2””W x 29””D x 35 1/2H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

KI– Jessa

HON– Grove

Manufacturer: Kimball

1600 Royal St. Jasper, IN 47549

Model #: K601A-TRLACLL

GSA Contract: FSC Group:

711-16

MOL

200,000

Exp. Date:

02-11-2021

GS-03F-059DA

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH3

Lounge Chair Kimball 107 2

Total 2

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH4 Break Room Chair

Description:

Single piece polymer shell with weight assisted flex seat, arm-less stacking chair. Plastic seat and back with open clean out space. Chrome Wire Rod Frame with sled base. Stacks 6 on the floor and 15 on a cart. 300 lb weight capacity.

Plastic Seat: Sterling

21”W x 23”D x 33”H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

Kimball– Poly

Allsteel- Nimble

Manufacturer: Sit On It Seating, 6415Katella Avenue, Cypress, CA 90630

Model #: 1051 FT2 FC15 PS A0 GL1 133P SC18 AC

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

12-19-2022

47QSMA18D08NQ

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH4

Stacking Chair Sit On It 127 12

Total 12

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH5 Task Chair, Hard caster

Description:

Highback task chair with die-cast aluminum frame with polished aluminum finish, standard cylinder, independently adjustable arms with 5” range, standard cushions, and five star base with hard cast-ers for carpeted floors. Chair shall be designed to fit 95% of the office population (5’0” - 6’4” height, 100 lbs to 300 lbs weight).

Chair shall have weight sensitive, self-locking recline mechanism with 20 degrees of movement, automatically pivoting backrest with seven- degree back tilt, and contoured cushions with waterfall edge to reduce pressure. Chair shall have modular components for easy replacement and maintenance.

Seat: Grade 1 Vellum, Black

Back Mesh: Monofilament Stripe, Black

Frame: Chrome 3 with Black Trim

Dimensions:

27W x 25D x 39-43 H (Overall)

Cost:

GSA Unit Cost:

**Image not representative of product finish selections

Warranty:

Textiles, Cushions, & Arm Pads – Five years of single shift use; All other components – 15 years 24/7 use

Testing and Environmental:

Tested in compliance with ANSI/ BIFMA X5.1 General Pur-pose Office standards. Lightweight for minimal environmental impact. GREENGUARD Indoor Air Quality, GREENGUARD Gold and BIFMA level® 2 certified.

Alternate Manufacturers:

Allseating-You Highback

Steelcase– Think

Manufacturer: Humanscale

5675 DTC Blvd Suite 100, Greenwood Village,CO 80111

Model #: Liberty Chair- L11AM10V101

711-18

10/9/2022

GS-29F-001N

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH5

Humanscale 101 16

Humanscale 106 1

Total 17

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH6 Executive Task Chair w/ Headrest

Description:

Freedom Task Chair

Adjustable Duron Arms, Graphite Frame, Standard Seat Pan, Stand-ard 5” Cylinder, Standard 3” Casters for carpeted floors, Standard

Foams and Plastics, Standard Base, 21”W x 23”D x 33”H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

15 Years, 24/7 Warranty

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

Allseating-You Highback

Steelcase– Think

Manufacturer: Humanscale

Model #: F211GV101

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

12-19-2022

GS-29F-0001N

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH6

Executive Task Chair Humanscale 102 1

Executive Task Chair Humanscale 103 1

Executive Task Chair Humanscale 104 1

Executive Task Chair Humanscale 105 1

Total 4

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH7 Guest/ Side Chair

Description:

Molti Guest chair Should have metal frame with plastic arms cap. Fully upholstered seat and back.

Frame:Silver

Arm: Black

Seat : Apex Pumice

Back: Brisa, Ash

241/2”W x 23”D x 33”H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

Kimball– Poly

Allsteel- Nimble

Manufacturer: Gunlocke

The Gunlocke Company, LLC One Gunlocke Drive Wayland, NY 14572

Model #: GK9901PR6

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

03-31-2022

GS-28F-0021Y

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH7

Gunlocke 102 2

Gunlocke 103 2

Gunlocke 104 2

Gunlocke 105 2

Gunlocke 106 1

Gunlocke 108 7

Total 16

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH8 Conference Chair on Caster

Description:

Mid back height chair on casters should have a tapered upholstery grade plywood bucket and mid tilt control.

Frame:Silver

Arm: Black

Seat : Brisa, Ash

Back: Brisa, Ash Dimensions:

271/4 “ ”W x 26 1/2”D x 33-37”H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

Kimball– Poly

Allsteel- Nimble

Manufacturer: Gunlocke

The Gunlocke Company, LLC One Gunlocke Drive Wayland, NY 14572

Model #: GSGNV17-051

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

03-31-2022

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH8

Gunlocke 108 12

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH9 Stacking Chair w/ cushion

Description:

Single piece polymer shell with weight assisted flex seat, arm-less stacking chair. Plastic seat and back with open clean out space. Upholstered seat cushion and back. Chrome Wire

Rod Frame with sled base. Stacks 5 on the floor and 6 on a cart. 300 lb weight capacity.

Upholstered back and cushion: Sierra Ocean, Green Hides

21”W x 22”D x 33”H

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

Kimball– Poly

Allsteel- Nimble

Manufacturer: Sit On It Seating, 6415Katella Avenue, Cypress, CA 90630

Model #: 1051 UP FC15 SC18AOGOAC

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

12-19-2022

47QSMA18D08NQ

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CH9

Stacking Chair Sit On It 128 124

Total 124

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CT1 Common Top, Laminate

Description:

Laminate top to be attached to the top of side by side lateral file cabinets.

Laminate top should have square edge, thickness of

2mm on a 1 1/8” particleboard substrate.

Laminate : Warm Ash

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Alternate Manufacturers:

Kimball Footprint, Steel Case Answer

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: D1R7218N

GSA Contract:

FSC Group:

711-3

500,000

03/22/2021

Contract Number:

GS-03F-078DA

Dimensions:

72” X 18”

Cost:

GSA Unit Cost:

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

CT1

Common Top, Laminate Knoll, Inc. 109 1

Knoll, Inc. 111 1

Knoll, Inc. 112 1

Knoll, Inc. 117 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

D8 U– Shaped Desk Unit with Overhead

Description:

Freestanding Metal U—Shaped Desk Unit 8’6” x 6’0”

Shall have metal overhead door storage with task lights and tackboard below.

72” x 30” Worksurface with end support and full height back pane

48” x 24” Worksurface

72” x 24” Worksurface

(1)box/box/file supporting pedestal 24” D, (1)file/file supporting pedestal 24” D, Pencil Drawer

Laminate top with square edges.

Wire Management should be included under all work surfaces.

Keyed alike per office.

Laminate Worksurface: Warm Ash

Metal Paint: Silver

Tackboard Fabric: Circuit W1754/5 Coil

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Alternate Manufacturers:

Kimball Footprint, Steel Case Answer

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

See Drawings

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

D8

U- Shape Desk with Overhead Knoll, Inc. 102 1

Total 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

D10 L– Shaped Work Station– No Overhead Storage

Description:

Freestanding Metal L—Shaped Desk Unit 7’6” x 6’0”

Partial height modesty panel on desk.

72” x 30” Worksurface

60” x 24” Worksurface

Box/Box/File supporting pedestal 20” D, 15”W

File/file supporting pedestal, 20”D, 15”W

Pencil Drawer

Laminate top with square edges.

Wire Management should be included under all work surfaces.

Keyed alike per office.

Trim to match top

Metal Paint: Silver

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Kimball Footprint, Steel Case Answer

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #:

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

See Drawings

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

D10

L- Shape Desk No Overhead Knoll, Inc. 103 1

L- Shape Desk No Overhead Knoll, Inc. 104 1

L- Shape Desk No Overhead Knoll, Inc. 105 1

L- Shape Desk No Overhead Knoll, Inc. 106 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

HD1 High Density Storage

Description:

Mechanical assisted storage unit to be operated by soft touch rotating handles. Each carriage should have a minimum load carrying capacity of

100lb per linear foot. Carriages should be made of welded steel and rails should be fully supported and fully grouted to evenly distribute system weight. System should contain anti tip devices that comply with seismic requirements.

Total capacity 560 cu ft.

To include ramp constructed of 3/4” plywood and galvanized steel. Ramp to have a slope of 1:12 and finished with LVT ( F1). LVT is to be installed on ramp after the shelving installation is compete.

Smooth Powder Coat Finish: Grey Cloud GC 225

Lifetime:

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Mayline, Bradford Systems

Manufacturer: Spacesaver Corporation The Spacesaver Group 1450 Janesville Avenue Fort Atkinson, WI 53538-2798

Model #:

Part:

711-7

MOL:

Nov. 21, 2023

GS-28F-006BA

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

HD1

High Density Storage Spacesaver Corp 114 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LE1 Mobile Full Height Lectern

Description:

Anodized Aluminum frame. Medium density fiberboard top with angled writing surface with pencil lip.

(2) Adjustable Shelves below writing surface.

Wire Grommets, oval, 6”wx 2-1/2”h, located at top and bottom of back panel.

(4) 3” Casters, 2 minimum Locking

Top Finish: Cool Grey

Panel Finish: Cool Grey

Dimensions:

20"W X 16"D X 44"H

Cost:

GSA Unit Cost:

**Image not representative of product finish selections

Warranty:

Warranted for 3 years.

Testing and Environmental:

Tested in compliance with ANSI/ BIFMA X5.1 General Purpose Office standards. Lightweight for minimal envi-ronmental impact. GREENGUARD Indoor Air Quality, GREENGUARD Gold and BIFMA level® 2 certified.

Alternate Manufacturers:

Haworth– Planes

Egan Visual

Manufacturer: Peter Pepper

Model #: 7935 Wheelies

71-304

MOL

500,000

Exp. Date:

May 3 2021

GS-28F-0017X

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LE1

Mobile Lectern Peter Pepper 108 1

Mobile Lectern Peter Pepper 128 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LF3 3H Lateral File– 30” W

Description:

3 Drawer Lateral File. File drawers include file hanging rails. Rails are provided for filing side-to-side and front-to-back and are adjust-able for letter, A4, foolscap, JIS, legal, or EDP papersizes. Files shall be of contemporary styling, with a steel top, side panels, back pan-el, full bottom, rollout drawers and shelves mounted on ball bear-ing suspensions, receding doors, fixed shelves, interlocking drawers and individual locking drawers. Available with or without locks. In-dividual locking drawers are also available with or without security separators. The wrapper, comprising the side panels and back pan-el, shall be 22-gauge steel with formed 20 gauge steel vertical chan-nels to support the mounting of drawer slides and shelves. Vertical channels shall be welded to the base assembly. In addition the ver-tical channels shall be glued and welded to the wrapper. Top pan shall be of 20-gauge steel with a formed channel spanning the width of the case. Top shall support the case lock housing. Top shall be mechanically attached to allow for removal and replacement in the field. The top pan shall be supported by side-to-side cross-rails that are welded to the side vertical channels. Steel Bottom pan shall be 20-gauge steel with formed channels spanning the depth and width of the case. Side-to-side and front to back channels are installed and welded to the pan for increased rigidity. The base shall be welded to the vertical channels and bottom flanges of the wrapper assembly. Base shall support four-recessed, extendable glides. *See Item Installation List for room locations

Finish: Medium Grey

Cost:

GSA Unit Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Steelcase– Universal

Haworth– X Series

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: C2F3936CCCC

GSA Contract:

711-11

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

36”W x 18”D x 39”H

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LF3

Lateral File 3- High Knoll, Inc. 109 2

Lateral File 3- High Knoll, Inc. 111 2

Lateral File 3- High Knoll, Inc. 112 2

Lateral File 3- High Knoll, Inc. 117 2

Total 8

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LF5 5H Lateral File– 36” W

Description:

5 Drawer Lateral File. File drawers include file hanging rails. Rails are provided for filing side-to-side and front-to-back and are adjust-able for letter, A4, foolscap, JIS, legal, or EDP paper sizes. Files shall be of contemporary styling, with a steel top, side panels, back pan-el, full bottom, rollout drawers and shelves mounted on ball bear-ing suspensions, receding doors, fixed shelves, interlocking drawers and individual locking drawers. Available with or without locks. In-dividual locking drawers are also available with or without security separators. The wrapper, comprising the side panels and back pan-el, shall be 22-gauge steel with formed 20 gauge steel vertical chan-nels to support the mounting of drawer slides and shelves. Vertical channels shall be welded to the base assembly. In addition the ver-tical channels shall be glued and welded to the wrapper. Top pan shall be of 20-gauge steel with a formed channel spanning the width of the case. Top shall support the case lock housing. Top shall be mechanically attached to allow for removal and replacement in the field. The top pan shall be supported by side-to-side cross-rails that are welded to the side vertical channels. Steel Bottom pan shall be 20-gauge steel with formed channels spanning the depth and width of the case. Side-to-side and front to back channels are installed and welded to the pan for increased rigidity. The base shall be welded to the vertical channels and bottom flanges of the wrapper assembly. Base shall support four-recessed, extendable glides. *See Item Installation List for room locations

Finish: Medium Grey

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Steelcase– Universal

Haworth– X series

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: QC2F3F169

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

36”W x 18”D x 63”H

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

LF5

Lateral File 5- High Knoll, Inc. 102 1

Lateral File 5- High Knoll, Inc. 103 1

Lateral File 5- High Knoll, Inc. 104 1

Lateral File 5- High Knoll, Inc. 105 1

Lateral File 5- High Knoll, Inc. 106 1

Total 5

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

R1 Deskside Recycling Bin– ( 7 Gallon)

Description:

Deskside recycling container with rectangular opening and Universal Recy-cling Symbol.

Finishes: Blue

Cost:

GSA Unit Cost:

Warranty:

1 year

Testing and Environmental:

Rubbermaid

United Receptacle

Manufacturer: Alle Designs 27 Ruskin Road, Amherst, NY 14226

Model #: 8128BLR - Blue

GSA Contract:

384-2

09/30/2021

Contract Number:

GS-07F-0026T

**Image not representative of product finish selections

15”Hx 14 1/2” x 10 1/8”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

R1

Recycling, Small Alle 101 14

Recycling, Small Alle 102 1

Recycling, Small Alle 103 1

Recycling, Small Alle 104 1

Recycling, Small Alle 105 1

Recycling, Small Alle 106 1

Recycling, Small Alle 107 1

Recycling, Small Alle 108 1

Recycling, Small Alle 109 4

Recycling, Small Alle 110 2

Recycling, Small Alle 111 4

Recycling, Small Alle 112 4

Recycling, Small Alle 114 2

Recycling, Small Alle 116 1

Recycling, Small Alle 117 2

Total 40

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

S1 Metal Open Shelving

Description:

Z Line Shelf should have 5 shelves and 4 openings.

16-Gauge “T” Shaped Uprights punched for adjustments on 1-

1/2” Center.

12-Gauge Hot rolled, 1 piece shelf clips.

22– Gauge Steel “W” Shelves with weight Capacity of 600 lbs

Minimum.

Finishes: Medium Gray

Cost:

GSA Unit Cost:

Warranty:

10 Year

Lyon, Pennco

**Image not representative of product finish selections

Dimensions:

48” W x 18” D x 84” H

71-310

MOL

500,000

Exp. Date:

March 25, 2022

GS—27F-017GA

S1

Manufacturer: Tennsco Corp

Model #: ZM7-4818S-5D

GSA Contract:

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

S1

Metal Open Shelving Tensco 126 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T1 Conference Table

Description:

Dividends Horizon Rectangular Conference table with Laminate top and Y-leg metal base. Tabletop is constructed of 0.028 inch thick plastic lami-nate on 1-1/8” particle core with 2mm edge band. Y leg Table base con-sists of (2) Y legs, (1) T Leg, (2) extruded aluminum Stretchers, 4”D 12 gauge steel stiffening plate, and die cast aluminum foot. Two integrated connection ports for HDMI, Power and land lines.

Laminate: Warm Ash 140

Metal Base: Silver Metallic

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Alternate Manufacturers:

Kimball Dock, KI Connection

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: DT1ARY14448N

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

144”W x 47 1/2” D x 28 1/2”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T1

Knoll, Inc. 108 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T2 Break Room Table

Description:

Trek Table with 1 1/4” Laminate table on fixed legs.. . Base shall be built of 2 1/2”, 14-gauge round tubular steel leg column with steel end cap and 16-gauge steel tapered legs elliptically swaged down to 1” diameter at end; highly durable, smooth powder-coated finish.

*See Item Installation List for room locations

Basis of Design:

Finishes:

Worksurface Laminate: North Sea LNA

Edge Trim Color: Blue Grey PGR

Beams and Legs Paint Color: Chrome Dimensions:

30”D x 72”L x 29”H

Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with applicable ANSI/BIFMA standards.

SCS Indoor Advantage- GOLD and BIFMA level® 1 certified.

FSC Certified wood

Alternate Manufacturers:

Knoll– Pixel

Haworth– Tactics

Manufacturer: KI, 1330 Bellevue Street, Green Bay, WI 54302

Model #: T256FT74PPGRLNACH4GB

GSA Contract: FSC Group:

Part SIN

711-11

MOL Exp. Date:

6/09/24

Contract Number:

GS-28F-0033P

**Image not representative of product finish selections

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T2

Break Room Table KI, Inc. 127 3

Total 3

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T3 Flip Top Table

Description:

Trek Table, 1 1/4” Laminate flip top, nesting table with casters. Table shall have wire management. Fold mechanism shall be built of 11-gauge, black zinc finish steel; the lightweight folding mechanism eas-ily releases and folds leg tightly to table bottom and securely locks with two polypropylene clips. When opened, legs engage into place for a tight, rigid fit between leg and mechanism. Built-in rubber bump-ers keep tables separated to prevent marring when tables are stacked. Base shall be built of 2 1/2”, 14-gauge round tubular steel leg column with steel end cap and 16-gauge steel tapered legs ellipti-cally swaged down to 1” diameter at end; highly durable, smooth powder-coated finish. Casters will include two locking and two non-locking casters made of molded nylon minimum of 2.44” in diameter.

Caster wheel treads are medium hard for easy mobility on carpet or hard floors.

Worksurface Laminate: North Sea LNA

Edge Trim Color: Blue Grey PGR

Beams and Legs Paint Color: Chrome

24”D x 72”L x 29”H

Cost:

GSA Unit Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with applicable ANSI/BIFMA standards.

SCS Indoor Advantage- GOLD and BIFMA level® 1 certified.

FSC Certified wood

Alternate Manufacturers:

Knoll– Pixel

Haworth– Tactics

Manufacturer: KI, 1330 Bellevue Street, Green Bay, WI 54302

Model #: T26FT74PPGRLNACH4CB

6/09/24

Contract Number:

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T3

Flip Top Table KI, Inc. 128 16

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T4 Benching Table

Description:

Laminate Worksurface 1 3/16” thick with wire management under worksurace. Fabric screen partition the length of work-surface. Tubular Steel legs with aluminum cradle. Each desk station should have 2 duplex units with receptacle and power har-ness per station. Clusters of desk stations that are free standing in the center of the room should include power pole in order to bring power to the individual desk stations.

Metal Base: Silver

Panel Fabric: Circuit W1754/5 Coil

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Alternate Manufacturers:

Steelcase– Universal

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

24” D x 48”W x 29” H

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T4

Benching Table Knoll 109 20

Benching Table Knoll 110 8

Benching Table Knoll 111 20

Benching Table Knoll 114 3

Benching Table Knoll 117 8

Total 59

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T5 Group Table

Description:

Dividends Horizon Rectangular table with Laminate top and Y- leg metal base. Tabletop is constructed of 0.028 inch thick plastic laminate on 1-

1/8” particle core with 2mm edge band. Y leg Table base consists of (2) Y legs, (1) T Leg, (2) extruded aluminum Stretchers, 4”D 12 gauge steel stiff-ening plate, and die cast aluminum foot.

Top Finish: Warm Ash

Metal Base: Silver

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Alternate Manufacturers:

Hon– Motivate, Allsteel Aware

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: DT1ARY9642N

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

96”Wx 42”D x 28 3/4”H

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T5

Group Table Knoll, Inc. 109 1

Group Table Knoll, Inc. 110 1

Group Table Knoll, Inc. 111 1

Group Table Knoll, Inc. 116 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers

T6 Round Occasional Table

1 3/16” - thick high pressure laminate round top. Self edge rim.

Finish:

Cost:

GSA Unit Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Haworth –Planes, Knoll-Horizons

Manufacturer: Kimball

Model #: 74K30RD /74K2015CFX

200,00

02/11/2021

Contract Number:

GS-03F-059DA

**Image not representative of product finish selections

30”D x 16”H

Wilsonart, Cloud 440, Metal Base: Silver Frost Metallic

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T6

Round Occasional Table Kimball 107 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers

T7 Testing Table

Antenna Table. Laminate Worksurface 1 3/16” thick with wire management under worksurace. Fabric screen partition the depth of worksurface. Tubular Steel legs with aluminum cra-dle.

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Steelcase– Universal

Haworth Planes

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

24” D x 48”W x 29” H

Metal Base: Silver

Panel Fabric: Circuit W1754/5 Coil

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T7

Testing Table Knoll 116 4

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers

T8 Stainless Steel Work Table

Table top should be constructed of 16 gauge type 304 stainless steel. Un-shelf to be constructed of 18-gauge stainless steel. Approximate 420 pound top shelf weight capacity. 5” swivel casters with two brakes. 3” gussets.

Stainless Steel

Cost:

GSA Unit Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Uline, Grangier

Manufacturer: Tabco

Model #: MSLAG306C

GSA Contract:

Contract Number:

GS-03F-078DA

**Image

30” x 72”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T8

Stainless Steel Work Table 115 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T9 Fixed Leg Table

Description:

Trek Table with 1 1/4” Laminate table on fixed legs.. . Base shall be built of 2 1/2”, 14-gauge round tubular steel leg column with steel end cap and 16-gauge steel tapered legs elliptically swaged down to 1” diameter at end; highly durable, smooth powder-coated finish.

Worksurface Laminate: North Sea LNA

Edge Trim Color: Blue Grey PGR

Beams and Legs Paint Color: Chrome

24”D x 48”L x 29”H

Cost:

GSA Unit Cost:

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with applicable ANSI/BIFMA standards.

SCS Indoor Advantage- GOLD and BIFMA level® 1 certified.

FSC Certified wood

Alternate Manufacturers:

Knoll– Pixel

Haworth– Tactics

Manufacturer: KI, 1330 Bellevue Street, Green Bay, WI 54302

Model #: T24FT74PPGRLNACH4GB

6/09/24

Contract Number:

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T9

Fixed Leg Table KI, Inc. 121 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T10 Facilitator Table

Description:

Trio Table with Laminate Top and Modesty Panel on

Casters.

Laminate top should have square edge, thickness of

2mm on a 1 1/8” particleboard substrate.

Modesty panel should be finished in laminate on both sides and attach to the table with hinges.

Table base to include folding mechanism to facilitate storage. Constructed of Aluminum casting and extruded aluminum. Finished in a silver powder coat. Base should have 2”diameter casters.

Powder coat Frame :Silver

Laminate:LM16 Charcoal/ Flint

24” x 48” x 29”

Cost:

GSA Unit Price:

**Image not representative of product finish selections

Warranty:

Lifetime of single shift service

Testing and Environmental:

BIFMA level® 2 certified and GREENGUARD Indoor Air Quali-ty,GREENGUARD Gold

Alternate Manufacturers:

KI-Trek

HON– Motivate

Manufacturer: Gunlocke

The Gunlocke Company, LLC One Gunlocke Drive Wayland, NY 14572

Model #: T3WR2448-LS, T3MPH48-L, T3BS2448-C

GSA Contract: FSC Group:

MOL

200,000

Exp. Date:

03-31-2022

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T10

Gunlocke 128 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T11 Benching Table w/ Mobile Pedestal

Description:

Laminate Worksurface 1 3/16” thick with wire management under worksurace. Fabric screen partition the length of work-surface. Tubular Steel legs with aluminum cradle. Each seat should have Personal Mobile File Pedestal with Steel top. Pedestal 15” x

18” D

Metal Base: Silver

Panel Fabric: Circuit W1754/5 Coil

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table Products standards.

GREENGUARD Indoor Air Quality certified and BIFMA level® 3 certified.

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

24” X 60” X 29”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

T11

Benching Table w/ Mobile Pedestal Knoll 112 16

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers

TL3 ESI

6 Watt 2 Limb Desk Top Light with USB charger & Occupan-cy sensor. 3 Brightness settings.

Finish: Silver

Warranty:

15 Year

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

Humanscale, Steelcase

Manufacturer: ESI

Model #: See Parts List

GSA Contract:

711-2

Mar 2, 2023

GS-28F-0011U

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

TL3

ESI 109 20

ESI 110 8

ESI 111 20

ESI 112 16

ESI 114 3

ESI 116 4

ESI 117 8

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

W1 Wastebasket– ( 7 Gallon)

Description:

Deskside wastebasket with rectangular opening

Finishes: Black

Cost:

United Receptacle

Manufacturer: Alle Designs 27 Ruskin Road, Amherst, NY 14226

Model #: 8128BK - Black

GSA Contract:

Contract Number:

GS-07F-0026T

**Image not representative of product finish selections

15”Hx 14 1/2” x 10 1/8”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

W1

Waste, Small Alle 101 14

Waste, Small Alle 102 1

Waste, Small Alle 103 1

Waste, Small Alle 104 1

Waste, Small Alle 105 1

Waste, Small Alle 106 1

Waste, Small Alle 107 1

Waste, Small Alle 108 1

Waste, Small Alle 109 4

Waste, Small Alle 110 2

Waste, Small Alle 111 4

Waste, Small Alle 112 4

Waste, Small Alle 114 2

Waste, Small Alle 116 1

Waste, Small Alle 117 2

Total 40

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

W2 Wastebasket– Large ( 23 Gallon)

Description:

Waste Receptacle (23gal) with swing lid. Shall be con-truscted of heavy duty, dent /corrosion resistant plastic.

Finishes: Black

Cost:

United Receptacle

Manufacturer: Alle Designs 27 Ruskin Road, Amherst, NY 14226

Model #: 8185BK w/ 7200 Swinging Lid - Black

GSA Contract:

Contract Number:

GS-07F-0026T

**Image not representative of product finish selections

30 1/2” H x19 3/4” X 11 1/2”

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

W2

Waste, Large Alle 127 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WB1 Work Bench

Description:

Metal Workbench with Hardwood top with stringer.

(4) Metal adjustable height legs.

Modular drawer and metal cabinet with (4) metal drawers, locking.

Frame: Light Grey

Top: Hardwood Butcher Block

Dimensions:

72"W X 30"D X 33-3/4"H

Cost:

GSA Unit Cost:

**Image not representative of product finish selections

Warranty:

Warranted for 10 years.

Testing and Environmental:

Tested in compliance with ANSI/ BIFMA X5.1 General Purpose Office standards. Lightweight for minimal envi-ronmental impact. GREENGUARD Indoor Air Quality, GREENGUARD Gold and BIFMA level® 2 certified.

Alternate Manufacturers:

Lyon

Greene Manufacturing, Inc.

Manufacturer: Tennsco Corp

Model #: WBA-1-3072W/MD-1524

71-310

MOL

500,000

Exp. Date:

March 25, 2022

GS—27F-017GA

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WB1

Work Bench Tensco Group 113 1

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS1 Workstation 7’6”x 8’0”

Description:

Paneled Workstation 7’-6” x 8-0” ( inside dimensions)

64”H, off- modular, acoustical, tackable, monolithic panels

66” Overhead Cabinet with steel flip up locking door, LED undercabinet light

72” x 30” worksurface

66” x 24” worksurface.

Pencil drawer

64”H x 24”W x 24”D Storage Tower, locking, with 2 draw-ers and door, wardrobe

Power and data to be located in base raceway. Furniture panel system should be wired to receive 3 separate cir-cuits per workstation.

Each workstation shall be keyed different.

Trim to match top

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

KI Unite, Kimball Footprint

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS1

Workstation with Overhead, 8'-6" x 8'-0" Knoll, Inc. 101 12

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS2 Part Time Workstation 8’-0” x 3’-0”

Description:

Paneled Workstation 8’-0” x 3’-0” ( inside dimensions)

64”H, off- modular, acoustical, tackable, monolithic panels

24D” x 96W” worksurface

(2) Overhead Cabinet with steel flip up locking door.

Power and data to be located in base raceway. Furniture panel system should be wired to receive 2 separate cir-

Trim to match top

Metal Paint: SIlver

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

KI Unite, Kimball Footprint

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS2

Part Time Workstation Knoll, Inc. 101 2

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS7 Workstation , 8’-0” x 6’-0”’

Description:

Paneled Workstation 8-0” x 6’-0” ( inside dimensions)

64”H, off- modular, acoustical, tackable, monolithic panels

48” Overhead Cabinet with steel flip up locking door.

72” x 30” worksurface

48” x 24” worksurface.

Fixed Pedestal

Pencil drawer

64”H x 24”W x 24”D Storage Tower, locking, with 2 draw-ers and door, wardrobe

Power and data to be located in base raceway. Furniture panel system should be wired to receive 3 separate cir-

Trim to match top

Metal Paint: Medium Gray

Mobile Pedestal Upholstery: Atlas, Graphite #K123617

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

KI Unite, Kimball Footprint

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WS7

Workstation 8'-6" x 6'-6" Knoll, Inc. 109 2

Workstation 8'-6" x 6'-6" Knoll, Inc. 111 2

Workstation 8'-6" x 6'-6" Knoll, Inc. 112 2

Workstation 8'-6" x 6'-6" Knoll, Inc. 114 1

Workstation 8'-6" x 6'-6" Knoll, Inc. 117 1

Total 8

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WSR10 Workstation Receptionist

Description:

64”H, off- modular, acoustical, tackable, monolithic panels

42” H modular, acoustical, tackable monolithic panels at recep-tion counter

(2) 48” Overhead Cabinet with steel flip up locking door.

72” x 30” worksurface

36” x 30” Worksurface

96” x 24” worksurface.

29 1/4” D Floorstanding Pedestal, Box, Box, File

Pencil drawer

64”H x 24”W x 24”D Storage Tower, locking, with 2 drawers and door, wardrobe

(3) 36” W Over Head Cabinet with steel flip up locking door

(2) 36”W x 39”H 3H Lateral File

Power and data to be located in base raceway. Furniture panel system should be wired to receive 3 separate circuits per work-station.

Trim to match top

Warranty:

Lifetime

Testing and Environmental:

Tested in compliance with ANSI/BIFMA X5.5 Desk/Table

Products standards. GREENGUARD Indoor Air Quality certi-fied and BIFMA level® 3 certified.

Alternate Manufacturers:

KI Unite, Kimball Footprint

Manufacturer: Knoll 1235 Water Street, East Greenville, PA 18041

Model #: See Parts List

GSA Contract:

Contract Number:

GS-03F-078DA

**Image not representative of product finish selections

Dimensions:

Circuit W1754/5 Coil

JB Andrews, MD P2 481544 FY20

US Army Corps of Engineers Louisville District

WSR10

L Shape Desk with Overhead Knoll, Inc. 101 1