47QSWB19A1701_RFQ.pdf

RFQ 47QSWB-19-A-1701

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS-SMALL PURCHASE SET-ASIDE (52.219-6)

PAGE OF PAGES

1 | 26

1. REQUEST NO.

47QSWB-19-A-1701

2. DATE ISSUED

November 15, 2018

3. REQUISITION/PURCHASE

REQUEST NO. SEE BELOW

4. CERT. FOR NAT. DEF. UNDER BDSA

REG. 2 AND/OR DMS REG. 1

RATING

General Services Administration Southwest Supply & Acquisition Center (7QSBPA-T9) 819 Taylor Street, Room 7A37 Fort Worth, TX 76102-6105

7 Days ARO

5B. FOR INFORMATION CALL: (NO COLLECT CALLS) 7. DELIVERY

NAME TELEPHONE NUMBER/EMAIL FOB DESTINATION OTHER

(SEE SCHEDULE OF ITEMS)

Terence Williams, Contract Officer terence.williams@gsa.gov

AREA CODE

NUMBER

850-8116

9. DESTINATION

TO BE SHOWN ON EACH ORDER ISSUED AGAINST

RESULTING BLANKET PURCHASE AGREEMENT

8. TO:

a. NAME OF CONSIGNEE

a. NAME b. COMPANY

b. STREET ADDRESS

c. STREET

c. CITY

d. CITY

e. STATE

f. ZIP

d. STATE

e. ZIP

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5A ON

OR BEFORE CLOSE OF BUSINESS (Date)

November 27, 2018 1:00 PM Central

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5A. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

THIS REQUEST FOR QUOTATION, IF ACCEPTED BY THE GOVERNMENT, WILL RESULT IN A SINGLE-AWARD BLANKET PURCHASE AGREEMENT (BPA) BEING ESTABLISHED AGAINST YOUR SCHEDULE 84, SIN 633 45 or SCHEDULE 51V, SIN 105 002 MULTIPLE AWARD SCHEDULE (MAS) FEDERAL SUPPLY SCHEDULE CONTRACT WITH THE SAME TERMS AND CONDITIONS.

A. The period covered by the BPA will begin at the date of award through the expiration date of your MAS contract, not to exceed a one-year base period with four, one-year option periods. The estimated quantities for the BPA are indicated on page(s) 4-5 of this RFQ. However, since demand can fluctuate significantly up or down due to market conditions, the agreement will be awarded as not to exceed $250,000 over the period of performance mentioned above. There is no guaranteed minimum number of orders or quantities under the agreement and it is possible that orders and quantities could be significantly less than estimated. The BPA will be reviewed at least once a year prior to exercising an option.

B. The Estimated Total Quantities listed in the Schedule of Items were retrieved from historical data, and represent NO

GUARANTEE to the volume of purchases to be placed under any resulting BPA.

C. You may NOT submit pricing higher than your approved MAS contract price. See page(s) 26 & 27 for evaluation factors for award. The items being procured must be awarded on your MAS contract by the time established for receipt of quotes;

otherwise the quote will be determined noncompliant and rejected in its entirety.

(Continued on Page 2) SIGNED DOCUMENTS INCLUSIVE OF ALL CLAUSES ARE REQUIRED FOR AWARD. FAX will NOT be accepted.

All responsible sources may submit a quotation, which if timely received, shall be considered by the agency.

12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS b. 20 CALENDAR DAYS c. 30 CALENDAR DAYS d. CALENDAR DAYS

% % % NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO 15. DATE OF QUOTATION

a. NAME OF QUOTER SIGN QUOTATION

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or Print) b. TELEPHONE

c. COUNTY PHONE:

d. CITY e. STATE f. ZIP c. TITLE (Type or Print) FAX:

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (Re. 6-95) Previous edition not usable Prescribed by GSA- FAR (48CFR) 53.215-1(a)

D. The Schedule of Items is to be used in submitting price quote information. Provide the unit price per the unit of issue shown and extend the sum, including freight charges as applicable. See page(s) 4-5. Provide the unit weight and unit cube per item.

E. The item purchase description(s) can be found on page(s) 6-7. It is the quoter’s responsibility to provide only items that fully comply with the specifications of the Item Purchase Description(s).

F. This is ONLY a request for pricing. Delivery orders will be issued pursuant to the evaluation of the quotations received. DO

NOT SHIP on this RFQ.

G. Price increases, regarding any subsequent BPA, will be a matter for negotiation.

H. The Government intends to award on initial quotation.

I. The Government will seek price reductions on this BPA in accordance with FAR 8.405-4.

J. Contractor’s past performance will be considered for evaluation. See page(s) 20 & 21.

K. SUPPLEMENTAL DOCUMENTATION REQUIRED:

1. FEDERAL SUPPLY SCHEDULE PRICE LIST. Provide a copy of your most recent authorized Federal Supply Schedule Price List and Cover Sheet in order for the Government to verify the item(s) is on your MAS Schedule at the time of RFQ closing. Please be sure to identify the item(s) you are offering within the copy of your price list. (Items must be on your MAS Contract prior to submitting your quote).

2. DESCRIPTIVE LITERATURE/DRAWINGS. Clear identification is the sole responsibility of the quoter and descriptive literature for ALL the products being offered is required at the time of quote. The Government will use this descriptive literature as a means of verifying product compliance with the Item Purchase Description(s) (IPDs). Pursuant to FAR 52.211-6 Brand Name of Equal, if you are quoting an “equal” item, your quote must provide sufficient literature identifying the page and paragraph where the information can be found to show compliance with each salient feature. The Government reserves the right to seek additional information/clarification about the descriptive literature being provided.

**FAILURE TO PROVIDE #2 ABOVE WILL CAUSE YOUR QUOTE NOT TO BE CONSIDERED FOR AWARD**.

L. Following is how you can obtain specifications:

FED Specs — Copies of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in “Document Number” field and hit Search.

MIL Specs — Copies of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in “Document Number” field and hit Search.

ANSI Standards — Application for copies of ANSI standards should be addressed to American National Standards Institue,25 West 43rd Street, 4th floor, New York, NY 10036. Telephone: 212-642-4900, Fax: 212-398-0023. www.ANSI.org. (ANSI does charge for their services.)

ASTM — Application for copies of ASTM standards should be addressed to ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Telephone: 610-832-9585, FAX: 610-832-9555. www.astm.org. (ASTM does charge for their services.)

Recycled Material — Information related to the EPA’s Comprehensive Procurement Guidelines (CPG) for recovered materials can be found at https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program.

Commercial Item Descriptions - https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in

“Document Number” field and hit Search.

M. There will be no minimum order amount under this Blanket Purchase Agreement.

N. This NSN will be awarded with FOB Destination pricing to all CONUS locations.

O. Deliveries to civilian activities: Supplies shall be marked in accordance with Federal Standard 123, edition in effect on the date of issuance of the solicitation.

Deliveries to military activities: Supplies shall be marked in accordance with Military Standard 129, edition in effect on the date of issuance of the solicitation.

P. This BPA can be cancelled by either party with a 30 day written notice.

Q. The awardee will be required to ship direct to APO/FPO addresses (state side addresses will no longer be provided) and to naval ships, when they receive orders that indicate this type of ship to addresses. This is a mandatory requirement.

R. If supplies shipped are not packaged, packed, and marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/remarking, by contract or otherwise, and charge the Contractor therefore at the following rates:

First Hour - $150.00 Each Additional Hour - $70.00

A minimum of two hours is required for each incident, making the minimum charge for remarking $220.00

The Contractor may also be charged for material costs, if incurred. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract. The rates above shall be determined and may be periodically updated by the Commissioner, Federal Acquisition Service, or a designee."

Signature Date

S. GSA’s Order Management Service (OMS) will process orders utilizing only Electronic Data Interchange (EDI) or Vendor Portal

(VP). Facsimile transmitted orders will no longer be an option.

EDI provides for fully electronic processing of all ordering transactions VP provides an internet portal for vendors to retrieve orders and manually input transactional data.

EDI is the preferred business transaction processing method, but vendors with small order volumes and less technical proficiency may use VP for reasons of lower overall costs and/or higher implementation costs for EDI.

Vendors are hereby notified that as of January 26, 2017, all new awardees are required to select either Electronic Data Interchange (EDI) or OMS Vendor Portal (VP) to interface with GSA Global Supply on receiving orders resulting from their award. EDI is the preferred method of order transmission to our vendors but OMS Vendor Portal is an acceptable means of transmission.

Vendors are required to review the instructions regarding enrollment in either one of these systems and processes contained in Attachment 1 of this solicitation/RFQ.

Enrollment in either program is required upon award and must be requested no later than 5 days after receipt of award. Failure to enroll may cause your award to be cancelled or terminated.

For further instructions on how to enroll in either program please contact the following:

EDI: GSAEDI@gsa.gov or EDI Help Desk at 703-605-9444 Vendor Portal: Gee.Jeon@gsa.gov or NCSC at 800-488-3111

SCHEDULE OF ITEMS

Use the Schedule of Items below to submit your quoted prices. Quoters who have FOB Destination pricing on their Multiple Award Schedule (MAS) contract shall provide pricing for each item listed in “TABLE 1”. Quoters who have FOB Origin pricing on their MAS contract shall provide separate pricing for the product and transportation (shipping and handling) costs for each item listed in “TABLE 2”. Annual BPA Total (one, 12-month base period and four) will be considered for award.

Complete only one of the “Tables” listed below based on the delivery terms of your MAS contract.

1 Unit Weight:

Unit Cube:

TABLE 1: For MAS Contracts Awarded with FOB Destination Terms

NAICS Code: 339113 750 Employees

Item No.

NSN/Description

Country of Origin, Manufacturer’s Name, and Part Number

Est’d Orders

(12-Month)

Est’d Qty.

(12- Month)

Unit of Issue

Total Destination

BPA Unit Price

(Including Freight)

Annual BPA Total

(Est’d 12- Month Qty. x Total

Destination BPA Unit Price)

CONUS

NSN: 8415-01-016-8034

Safety Helmet IPD Attached

122 896

PG

(Package of

Individual

Chin Straps)

Annual BPA Total (Total Destination BPA Unit Price X Est. 12-month Qty) $

Total BPA Price (Annual BPA Total X 5 Years) $

* Total unit price for award determination is unit origin price plus the unit transportation costs. Unit transportation costs must be included in the total destination unit price.

1 Unit Weight:

Unit Cube:

TABLE 2: For MAS Contracts Awarded with FOB Origin Terms

NAICS Code: 339113 750 Employees Item No.

NSN/Description

Country of

Origin, Manufacturer’s Name, and Part

Number

Est’d Orders

(12- Month)

Est’d Qty.

(12-

Month)

Unit of Issue

Per Unit

BPA

Price

Per Unit Shipping

Handling

Total Destination BPA

Unit Price (Including Freight)

Annual BPA Total (Est’d 12- Month

Qty. x Total Destination

BPA Unit Price)

CONUS

NSN: 8415-01-016-8034

Chin Strap IPD Attached

122 896

PG

(Package of 25 Individual

Chin Straps)

Annual BPA Total (Total Destination BPA Unit Price ( Per Unit BPA Price + Per Unit S&H) x Est’ 12-month Qty) $

Total BPA Price (Annual BPA Total X 5 Years) $

DESCRIPTIONS/SPECIFICATIONS

1. NSN: 8415-01-016-8034

STRAP, CHIN: Shall be E.D. Bullard P/N ES-42, or equal, unbleached white, adjustable elastic strap not less than 0.50 inch (12.7mm) wide, with plastic hooks for use with standard safety helmet (hard hat).

Unit of Issue: PG (PACKAGE of 25 individual chin straps)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129.

The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

(Include special marking when required) Special marking shall include:

1) Lot Batch number.

2) Dates of manufacture.

3) Instructions for use.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/ GHS standards will be required. Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data:

(1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

END OF ITEM PURCHASE DESCRIPTION(S)

***ALL PAGES MUST BE RETURNED WITH YOUR QUOTE***

Contract Administration Data

Please provide the following information:

MAS Contract Number: GS-____________________________

Contractors’ Data Universal Numbering System (DUNS) No.: _____________________________

Quoter’s P.O.C.: __________________________________________________________________

Phone Number: ___________________________________________________________________

Fax No.__________________________________________________________________________

E-mail: __________________________________________________________________________

Are you currently setup to accept: EDI - Yes____ No____

Vendor Portal - Yes____ No____

G-FSS-900-A CONTACT FOR CONTRACT ADMINISTRATION (JAN 1994)

Offerors are required to designate a person to be contacted for prompt contract administration.

NAME ________________________________________________________________

TITLE _________________________________________________________________

ADDRESS ____________________________________________________________

__________________________________________ ZIP CODE ________________

TELEPHONE NO. (_______) _________________ FAX NO. __________________

552.211-73 MARKING (FEB 1996)

(a) General requirements. Interior packages, if any, and exterior shipping containers shall be marked as specified elsewhere in the contract. Additional marking requirements may be specified on delivery orders issued under the contract. If not otherwise specified, interior packages and exterior shipping containers shall be marked in accordance with the following standards.

(1) Deliveries to civilian activities. Supplies shall be marked in accordance with Federal Standard

123, edition in effect on the date of issuance of the solicitation.

(2) Deliveries to military activities. Supplies shall be marked in accordance with Military Standard

129, edition in effect on the date of issuance of the solicitation.

(b) Improperly marked material. When Government inspection and acceptance are at destination, and delivered supplies are not marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor to perform the required marking, by contract or otherwise, and charge the Contractor, therefore at the rate specified elsewhere in this contract. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract.

552.211-75 PRESERVATION, PACKAGING, AND PACKING (FEB 1996)

Unless otherwise specified, all items shall be preserved, packaged, and packed in accordance with normal commercial practices, as defined in the applicable commodity specification. Packaging and packing shall comply with the requirements of the Uniform Freight Classification and the National Motor Freight Classification (issue in effect at time of shipment) and each shipping container of each item in a shipment shall be of uniform size and content, except for residual quantities. Where special or unusual packing is specified in an order, but not specifically provided for by the contract, such packing details must be the subject of an agreement independently arrived at between the ordering activity and the Contractor.

552.212-4 Contract Terms and Conditions–Commercial Items (FAR DEVIATION) (Feb 2018)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers.

The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include—

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer— System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by

EFT.

(2) The due date for making invoice payments by the designated payment office is the later of the following two events:

(i) The 10th day after the designated billing office receives a proper invoice from the Contractor. If the designated billing office fails to annotate the invoice with the date of receipt at the time of receipt, the invoice payment due date shall be the 10th day after the date of the Contractor’s invoice; provided the Contractor submitted a proper invoice and no disagreement exists over quantity, quality, or Contractor compliance with contract requirements.

(ii) The 10th day after Government acceptance of supplies delivered or services performed by the Contractor.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act

(31 U.S.C. 3903) and prompt payment regulations at 5 CFR Part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109 , which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in

32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C.

1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C.

431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, Unauthorized Obligations, and Commercial Supplier Agreements - Unenforceable Clauses paragraphs of this clause.

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any commercial supplier agreements as amended by the Commercial Supplier Agreements - Unenforceable Clauses provision.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments.

(9) The specification.

(t) System for Award Management (SAM).

(1) Unless exempted by an addendum to this contract, the Contractor is responsible during performance and through final payment of any contract for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government’s reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(2)(i) If a Contractor has legally changed its business name, “doing business as” name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in FAR subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day’s written notification of its intention to (A) change the name in the SAM database;

(B) comply with the requirements of subpart 42.12; and (C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (t)(2)(i) of this clause, or fails to perform the agreement at paragraph (t)(2)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the “Suspension of Payment” paragraph of the electronic funds transfer (EFT) clause of this contract.

(3) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database.

Information provided to the Contractor’s SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the “Suspension of payment” paragraph of the EFT clause of this contract.

(4) Offerors and Contractors may obtain information on registration and annual confirmation requirements via SAM accessed through https://www.acquisition.gov.

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any commercial supplier agreement (as defined in 502.101) that includes any language, provision, or clause requiring the Government to pay any future fees, penalties, interest, legal costs or to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such language, provision, or clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the commercial supplier agreement. If the commercial supplier agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such language, provision, or clause is deemed to be stricken from the commercial supplier agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification or any other payment by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(w) Commercial supplier agreements–unenforceable clauses.When any supply or service acquired under this contract is subject to a commercial supplier agreement (as defined in 502.101), the following language shall be deemed incorporated into the commercial supplier agreement. As used herein, “this agreement” means the commercial supplier agreement:

(1) Notwithstanding any other provision of this agreement, when the end user is an agency or instrumentality of the U.S. Government, the following shall apply:

(i) Applicability. This agreement is a part of a contract between the commercial supplier and the U.S.

Government for the acquisition of the supply or service that necessitates a license or other similar legal instrument (including all contracts, task orders, and delivery orders under FAR Part 12).

(ii) End user. This agreement shall bind the ordering activity as end user but shall not operate to bind a Government employee or person acting on behalf of the Government in his or her personal capacity.

(iii) Law and disputes. This agreement is governed by Federal law.

(A) Any language purporting to subject the U.S. Government to the laws of a U.S. state, U.S.

territory, district, or municipality, or a foreign nation, except where Federal law expressly provides for the application of such laws, is hereby deleted.

(B) Any language requiring dispute resolution in a specific forum or venue that is different from that prescribed by applicable Federal law is hereby deleted.

(C) Any language prescribing a different time period for bringing an action than that prescribed by applicable Federal law in relation to a dispute is hereby deleted.

(iv) Continued performance. The supplier or licensor shall not unilaterally revoke, terminate or suspend any rights granted to the Government except as allowed by this contract. If the supplier or licensor believes the ordering activity to be in breach of the agreement, it shall pursue its rights under the Contract Disputes Act or other applicable Federal statute while continuing performance as set forth in subparagraph

(d) (Disputes).

(v) Arbitration; equitable or injunctive relief. In the event of a claim or dispute arising under or relating to this agreement, a binding arbitration shall not be used unless specifically authorized by agency guidance, and equitable or injunctive relief, including the award of attorney fees, costs or interest, may be awarded against the U.S. Government only when explicitly provided by statute (e.g., Prompt Payment Act or Equal Access to Justice Act).

(vi) Updating terms.

(A) After award, the contractor may unilaterally revise commercial supplier agreement terms if they are not material. A material change is defined as:

(1) Terms that change Government rights or obligations;

(2) Terms that increase Government prices;

(3) Terms that decrease overall level of service; or

(4) Terms that limit any other Government right addressed elsewhere in this contract.

(B) For revisions that will materially change the terms of the contract, the revised commercial supplier agreement must be incorporated into the contract using a bilateral modification.

(C) Any agreement terms or conditions unilaterally revised subsequent to award that are inconsistent with any material term or provision of this contract shall not be enforceable against the Government, and the Government shall not be deemed to have consented to them.

(vii) No automatic renewals. If any license or service tied to periodic payment is provided under this agreement (e.g., annual software maintenance or annual lease term), such license or service shall not renew automatically upon expiration of its current term without prior express consent by an authorized Government representative.

(viii) Indemnification. Any clause of this agreement requiring the commercial supplier or licensor to defend or indemnify the end user is hereby amended to provide that the U.S. Department of Justice has the sole right to represent the United States in any such action, in accordance with 28 U.S.C. 516.

(ix) Audits. Any clause of this agreement permitting the commercial supplier or licensor to audit the end user’s compliance with this agreement is hereby amended as follows:

(A) Discrepancies found in an audit may result in a charge by the commercial supplier or licensor to the ordering activity. Any resulting invoice must comply with the proper invoicing requirements specified in the underlying Government contract or order.

(B) This charge, if disputed by the ordering activity, will be resolved in accordance with subparagraph (d) (Disputes); no payment obligation shall arise on the part of the ordering activity until the conclusion of the dispute process.

(C) Any audit requested by the contractor will be performed at the contractor's expense, without reimbursement by the Government.

(x) Taxes or surcharges. Any taxes or surcharges which the commercial supplier or licensor seeks to pass along to the Government as end user will be governed by the terms of the underlying Government contract or order and, in any event, must be submitted to the Contracting Officer for a determination of applicability prior to invoicing unless specifically agreed to otherwise in the Government contract.

(xi) Non-assignment. This agreement may not be assigned, nor may any rights or obligations thereunder be delegated, without the Government's prior approval, except as expressly permitted under subparagraph (b) of this clause.

(xii) Confidential information. If this agreement includes a confidentiality clause, such clause is hereby amended to state that neither the agreement nor the contract price list, as applicable, shall be deemed “confidential information.” Issues regarding release of “unit pricing” will be resolved consistent with the Freedom of Information Act. Notwithstanding anything in this agreement to the contrary, the Government may retain any confidential information as required by law, regulation or its internal document retention procedures for legal, regulatory or compliance purposes; provided, however, that all such retained confidential information will continue to be subject to the confidentiality obligations of this agreement.

(2) If any language, provision, or clause of this agreement conflicts or is inconsistent with the preceding paragraph (w)(1), the language, provisions, or clause of paragraph (w)(1) shall prevail to the extent of such inconsistency.

552.212-72 Contract Terms and Conditions Required to Implement Statutes or Executive Orders

Applicable to GSA Acquisition of Commercial Items JUN 2015) The Contractor agrees to comply with any provision or clause that is incorporated herein by reference to implement provisions of law or Executive Orders applicable to acquisition of commercial items or components.

The provision or clause in effect based on the applicable regulation cited on the date the solicitation is issued applies unless otherwise stated herein. The following provisions and clauses are incorporated by reference:

[The contracting officer should either check the provisions and clauses that apply or delete the provisions and clauses that do not apply from the list. The contracting officer may add the date of the provision or clause if desired for clarity.)

(a) Provisions.

552.223-72 Hazardous Material Information

(b) Clauses.

552.223-70 Hazardous Substances

552.223-71 Nonconforming Hazardous Material

552.223-73 Preservation, Packaging, Packing, Marking, and Labeling of Hazardous Materials (HAZMAT) for Shipments.

552.238-70 Identification of Electronic Office Equipment Providing Accessibility for the Handicapped

552.238-72 Identification of Products that have Environmental Attributes

D-FSS-456 PACKAGING AND PACKING (APR 1984)

(a) Packaging. Shall be in accordance with accepted commercial practice.

(b) Packing. Shall be packed to ensure carrier acceptance and safe delivery to the destination in containers complying with rules and regulations applicable to the mode of transportation.

E-FSS-514 PRODUCTION AND INSPECTION POINT(S) (JUN 1990)

(a) Production Point. Offeror shall insert, in the appropriate spaces provided below, the names of the manufacturers of the items offered and the address and telephone number of the facility(ies) at which the items will be manufactured or produced.

(b) Source Inspection Point. Offeror shall indicate, in the spaces provided below, the location(s) at which the supplies will be inspected or made available for inspection. If the addresses of the respective production and inspection points are identical, the offeror should insert "same" in the inspection point column.

PRODUCTION POINT— INSPECTION POINT

ITEM NAME OF NAME, ADDRESS (If other than NO(s). MANUFACTURER (Including County), and Production Point)

TELEPHONE NUMBER

NOTE: If additional space is needed, the offeror may furnish the requested information by an attachment to the offer.

E-FSS-522 INSPECTION AT DESTINATION (MAR 1996)

(a) Inspection by the Government. It is anticipated that the supplies purchased under this contract will be inspected at destination by the Government to ensure conformance with technical requirements as specified herein.

(b) Responsibility for Rejected Supplies. If, after due notice of rejection, the Contractor fails to remove or provide instructions for the removal of rejected supplies pursuant to the Contracting Officer's instructions, the Contractor shall be liable for all costs incurred by the Government in taking such measures as are expedient to avoid unnecessary loss to the Contractor. In addition to any other remedies, which may be available under this contract, the supplies may be stored for the Contractor's account or sold to the highest bidder on the open market and the proceeds applied against the accumulated storage and other costs, including the cost of the sale.

(c) Additional Costs for Inspection and Testing. When prior rejection makes re-inspection or retesting necessary, the following charges are applicable. When inspection or testing is performed by or under the direction of GSA, charges will be at the rate of $22.00 per man-hour or fraction thereof if the inspection is at a GSA distribution center; $26.00 per man-hour or fraction thereof, plus travel costs incurred, if the inspection is at another location; and $26.00 per man-hour or fraction thereof for laboratory testing, except that when a testing facility other than a GSA laboratory performs all or part of the required tests, the Contractor shall be assessed the actual cost incurred by the Government as a result of testing at such facility. When inspection is performed by or under the direction of any agency other than GSA, the charges indicated above may be used, or the agency may assess the actual cost of performing the inspection and testing.

TIME OF DELIVERY

Delivery is required to be made at destination within * 7 * calendar days after receipt of order.

F-FSS-736-A EXPORT TRAFFIC RELEASE (OCT 1988)

Supplies ordered by GSA for export will not be shipped by the Contractor until shipping instructions are received from GSA. To obtain shipping instructions, the Contractor shall forward completed copies of GSA Form 1611, Application for Shipping Instructions and Notice of Availability, to the GSA office designated on the purchase order at least 15 days prior to the anticipated shipping date. Copies of GSA Form 1611 will be furnished to the Contractor with the purchase order. Failure to comply with this requirement could result in nonacceptance of the material by authorities at the port of exportation. When supplies for export are ordered by other Government agencies the Contractor should obtain shipping instructions from the ordering agency.

552.216-73 ORDERING INFORMATION (AUG 2010)

(a) In accordance with the Placement of Orders clause of this solicitation, the offeror elects to receive orders placed by

GSA's Federal Acquisition Service (FAS) by either facsimile transmission or computer-to-computer Electronic Data Interchange (EDI).

(b) An offeror electing to receive computer to computer EDI is requested to indicate below the name, address, and telephone number of the representative to be contacted regarding establishment of an EDI interface.

(c) An offeror electing to receive orders by facsimile transmission is requested to indicate below the telephone number(s) for facsimile transmission equipment where orders should be forwarded.

(d) For mailed orders, the offeror is requested to include the postal mailing address(es) where paper…