IPD 7290-01-369-7966.pdf

Potential Sources: (Manufacturer) BBMC, Inc. P/N BBMC GSI-1 1 North Main Street Lanesboro, MA 01237-0000

(518) 729-3535 CAGE Code: 02LN4

(Vendor) Noble Supply & Logistics P/N BBMC

GSI-1

302 Weymouth Street Rockland, MA 02370-1171

(781) 871-1911 CAGE Code: 1HEN9

NOTE: IF IPD DATE OR LAST REVIEW DATE IS OVER 24 MONTHS OLD,

REQUEST TECHNICAL REVIEW BEFORE USING IT IN A SOLICITATION

ITEM PURCHASE DESCRIPTION

NSN: 7290-01-369-7966 Approved by: Jay Giroux PPN: N/A Issued by: 7QSBKB/545 BPA: N/A Date Issued: 08/18/2023 DAC: N/A Supersedes: 08/23/2021

ENAC: N/A

Current Proposed Effective After:

Acquisition Advice Code: H Method of Purchase: 22

Specification: IPD Unit of Issue: EA Quantitative Expression: N/A Shelf-Life Code: 0

QPL Number:

Age on Delivery, MAX: N/A

REASON FOR ISSUE: IPD REVIEW – NO CHANGES MADE.

NSN: 7290-01-369-7966

FLATIRON, ELECTRIC: Shall be in accordance with the latest revisions of UL Standards 1005, 498, and 817. Shall be BBMC, Inc. P/N BBMC GSI-1, or equal, in accordance with the following characteristics:

TYPE: Spray/Steam/Dry.

CORD: 3-conductor cord (2-conductor with grounding conductor) with 3-terminal (male prong) plug.

LOAD RATING: 125 Volts, 15-Amp, 50-60 Hz, 16 AWG.

VOLTAGE: 120 volts AC.

CORD: NEC Flexible, Type HPN, 2 conductor with additional grounding conductor shall be used and conform to the requirements of UL Standard 1005.

PLUG: 3-terminal (male prong), non-locking, non-polarized, integrally molded.

NOTE: Removable pin terminal type connection shall not be used.

MANUFACTURING AND PRODUCTION TESTS: If the flatiron is modified from the original UL listed manufactured flatiron, the contractor shall conduct routine production-line testing on each flatiron to verify compliance with the following clauses in UL 1005:

Clause 41: Dielectric Voltage Withstand Test Clause 42: Grounding Continuity Test

SALIENT CHARACTERISTICS: The flatiron shall have a smooth, snag-free sole plate, temperature selector, push button spray, heel rest, button nook, and water level window or transparent water tank.

MARKINGS AND LABELS: If the flatiron is modified from the original UL listed manufactured flatiron, all of the original manufacturer’s names, labels, logos, care instructions, fabric guides, and inkjet or “molded in” markings and all UL labels and markings shall be completely and permanently removed from each flatiron.

FABRIC GUIDE LABEL: Each flatiron shall contain a permanent, waterproof fabric guide label, centered on the upper surface of the flatiron. If the flatiron is modified from the original UL listed manufactured flatiron, the fabric guide label shall be in the same format as and contain the same information as the original manufacturer's label, and the fabric guide label shall contain the name and address of the company modifying the flatiron (the company installing the three prong wire and cord).

The name and address shall be located on the bottom portion of the fabric guide label. If the flatiron is modified from the original UL listed manufactured flatiron, the fabric guide label shall contain no reference to the original manufacturer's names, markings, or model numbers, or to UL logos or markings.

NOTE: The fabric guide label shall be consistent with information listed in the care and use instruction booklet.

CARE AND USE INSTRUCTION BOOKLET: Each flatiron shall be accompanied by a care and use instruction booklet. The care and use instructions shall be in the same format as and contain the same information as the care and use information furnished with the original manufacturer's flatiron. If the flatiron is modified from the original UL listed manufactured flatiron, no manufacturers' names, markings, model numbers, or logos shall appear anywhere in the instruction booklet.

HAZARDOUS MATERIALS: The flatiron components shall be completely free of all asbestos material.

WORKMANSHIP: The irons shall contain no dents, cracks, scratches, loose screws or parts, and shall have no defects that may affect performance or serviceability. The bottom plate shall be smooth and flat with no burrs, scratches, or edges sharp enough to damage any cloth. The power supply cord and plug shall be free from cracks, cuts, chips, or worn insulation. The supply cord connections at the base of the flatiron and at the plug shall not be loose or damaged. The plug contacts shall not be corroded or damaged. The flatiron shall be manufactured to preclude any possible safety hazard.

Unit of Issue - EA (Each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-

75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export, or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.