MAS - Cherokee Nation Security & Defense, LLC - 47QSWA19D005Y

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE PRICE LIST

MULTIPLE AWARD SCHEDULE (MAS)

FSC GROUPS: Security and Protection - Security Services & Facilities - Facilities Solutions

CONTRACT NUMBER:

47QSWA19D005Y

Cherokee Nation Security & Defense, LLC

10838 E Marshall St.

Tulsa, OK 74116

Phone: 918-430-3407 Fax: 918-430-2424

Contract Administrator: Joshua R Womack

Josh.Womack@cn-bus.com

PERIOD COVERED BY CONTRACT:

April 10, 2019 through April 9, 2024

Price List is current through Mass Modification A847, signed July 14, 2022

Business Size:

Small Disadvantaged, Minority-Owned, 8(a) Program Participant Business

For more information on ordering from Federal Supply Schedule click on the FSS Schedules button at fss.gsa.gov. On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA

Advantage!™, a menu-driven database system. The INTERNET address for GSA Advantage!™ is: http://www.GSAAdvantage.gov.

http://www.gsa.gov/

918-430-3426 47QSWA19D005Y Page 2

CUSTOMER INFORMATION

1a. Table of Awarded Special Item Numbers with appropriate cross-reference to page numbers:

SIN Recovery SIN Description

334512 334512RC Total Solution Support Products for Facilities

Management Systems

541330L 541330LRC Security System Integration, Design, Management, & Life Cycle Support

OLM OLMRC Order-Level Materials

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price.

Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply. See below

1c. If the Contractor is proposing hourly rates a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided. If hourly rates are not applicable, indicate “Not applicable” for this item. See below

2. Maximum Order: $200,000.00

3. Minimum Order: $100.00

4. Geographic Coverage (delivery Area): Worldwide

5. Point(s) of production (city, county, and state or foreign country): Same as Contractor

6. Discount from list prices or statement of net price: Government net prices (discounts already deducted).

7. Quantity discounts: None

8. Prompt payment terms: Net 30 days; Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. Foreign items (list items by country of origin): None

10a. Time of Delivery (Contractor insert number of days): Contact Contractor

10b. Expedited Delivery. The Contractor will insert the sentence “Items available for expedited delivery are noted in this price list.” under this heading. The Contractor may use a symbol of its choosing to highlight items in its price list that have expedited delivery: Contact Contractor

10c. Overnight and 2-day delivery. The Contractor will indicate whether overnight and 2-day delivery is available. Also, the Contractor will indicate that the schedule customer may contact the Contractor for rates for overnight and 2-day delivery: Contact Contractor

918-430-3426 47QSWA19D005Y Page 3

10d. Urgent Requirements. The Contractor will note in its price list the “Urgent Requirements” clause of its contract and advise agencies that they can also contact the Contractor’s representative to affect a faster delivery: Contact Contractor

11. F.O.B Points: Destination

12a. Ordering Address: Same as Contractor

12b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket

Purchase Agreements (BPA’s), are found in Federal Acquisition Regulation (FAR) 8.405-3.

13. Payment address: Same as Contractor

14. Warranty provision: Contractor’s standard commercial warranty.

15. Export Packing Charges (if applicable): N/A

16. Terms and conditions of rental, maintenance, and repair (if applicable): N/A

17. Terms and conditions of installation (if applicable): N/A

18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable): N/A

18b. Terms and conditions for any other services (if applicable): N/A

19. List of service and distribution points (if applicable): N/A

20. List of participating dealers (if applicable): N/A

21. Preventive maintenance (if applicable): N/A

22a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants): N/A

22b. If applicable, indicate that Section 508 compliance information is available on Electronic and

Information Technology (EIT) supplies and services and show where full details can be found (e.g.

contactor’s website or other location.) The EIT standards can be found at: www.Section508.gov/. N/A

23. Unique Entity Identifier (UEI) number: N1QMLGBUSEJ6

24. Notification regarding registration in System of Award (SAM) database: Registered: 5YTQ5 http://www.section508.gov/

918-430-3426 47QSWA19D005Y Page 4

GSA PRICING

SIN Labor Category

GSA Price

4/10/19

4/9/20

GSA Price

4/10/20

4/9/21

GSA Price

4/10/21

4/9/22

GSA Price

4/10/22

4/9/23

GSA Price

4/10/23

4/9/24

541330L Active Vehicle Barrier

Technician**

$123.10 $126.18 $129.34 $132.57 $135.88

541330L, 334512

AUTO CAD

Technician

$60.66 $62.18 $63.73 $65.33 $66.96

541330L, 334512

CADD Operator $83.48 $85.57 $87.71 $89.90 $92.15

541330L, 334512

Electronic Security

Engineer

$115.59 $118.48 $121.44 $124.48 $127.59

541330L, 334512

Engineering Technician $83.48 $85.57 $87.71 $89.90 $92.15

541330L ICIDS Electronics

Maintenance

Technician**

$40.57 $41.58 $42.62 $43.69 $44.78

541330L, 334512

Lead Site Engineer $108.04 $110.74 $113.51 $116.35 $119.26

541330L, 334512

Maintenance Manager $83.64 $85.73 $87.87 $90.07 $92.32

541330L Mechanical

Technician**

$66.97 $68.64 $70.36 $72.12 $73.92

541330L, 334512

Network Specialist $115.59 $118.48 $121.44 $124.48 $127.59

541330L, 334512

Network Technician $92.14 $94.45 $96.81 $99.23 $101.71

541330L, 334512

OEM Certified

Engineer

$109.50 $112.24 $115.04 $117.92 $120.87

541330L, 334512

OEM Certified

Technician

$71.83 $73.63 $75.47 $77.36 $79.29

541330L, 334512

OEM

Software/Systems

Technician

$105.55 $108.19 $110.90 $113.67 $116.51

541330L, 334512

Planner Scheduler $71.83 $73.63 $75.47 $77.36 $79.29

541330L, 334512

Program Manager $85.14 $87.27 $89.46 $91.69 $93.98

541330L, 334512

Project Manager $79.98 $81.98 $84.03 $86.13 $88.29

918-430-3426 47QSWA19D005Y Page 5

SIN Labor Category

GSA Price

4/10/19

4/9/20

GSA Price

4/10/20

4/9/21

GSA Price

4/10/21

4/9/22

GSA Price

4/10/22

4/9/23

GSA Price

4/10/23

4/9/24

541330L, 334512

Service Manager $85.14 $87.27 $89.46 $91.69 $93.98

541330L, 334512

Systems Engineer $115.59 $118.48 $121.44 $124.48 $127.59

SERVICE CONTRACT LABOR STANDARDS MATRIX

Contract Labor Category SCLS Equivalent Code – Title WD Number

Active Vehicle Barrier

Technician

23181 - Electronics Technician

Maintenance I

2015-4281

ICIDS Electronics

Maintenance Technician

23181 - Electronics Technician

Maintenance I

2015-4281

Mechanical Technician 23181 - Electronics Technician

Maintenance I

2015-4281

"The Service Contract Labor Standards (SCLS) is applicable to this contract and it includes SCLS applicable labor categories. The prices for the indicated (**)SCLS labor categories are based on the U.S. Department of Labor Wage Determination Number(s) identified in the SCLS matrix. The prices awarded are in line with the geographic scope of the contract (i.e. nationwide). "

918-430-3426 47QSWA19D005Y Page 6

LABOR CATEGORY DESCRIPTIONS

Active Vehicle Barrier Technician

Position Description: Responsible for installation, repair, and maintenance of hydraulic, mechanical, electrical, electromechanical, or other systems of comparable complexity to vehicle barrier systems.

Must be capable of troubleshooting and repairing basic system failures. Candidate must have computer skills at least at the beginner level.

Minimum Education Level: HS Diploma or GED or other equivalent degree program

Minimum Years of Experience: 5

AUTO CAD Technician

Position Description: Develops and produces site specific drawings for civil, electrical and networking packages. Uses manual drafting skills to draw plans that cannot be computer-generated. The job entails fine-tuning and revising plans to meet manufacturing and architectural requirements.

Minimum Education Level: Bachelor's Degree or Equivalent

Minimum Years of Experience: 2

CADD Operator

Position Description: Experience in the design of Low Voltage systems such as Access Control, CCTV systems, fire alarm or equivalent, A/V, Telecom and Control Systems; responsible for designing commercial system projects from draft to submission status including preparing as built system layout, preforming circuit and battery calculations, providing technical support when needed and preparing close-out documentation.

Minimum Years of Experience: 4

Electronic Security Engineer

Position Description: Provides specific design, oversight and execution of high level electronic security system integration, programming and implementation. Provides final review and completion of termination, commissioning, verification and acceptance of Electronic Security Systems.

Minimum Years of Experience: 3

Engineering Technician

Position Description: Provides technical repairs, maintenance, termination and troubleshooting of PLCs, computer-based systems, networking and integrated ESS solutions.

ICIDS Electronics Maintenance Technician

Position Description: Responsible for providing a variety of complex technical support for maintenance support, repairs, modification, equipment setup and testing, and formal/informal training of customer personnel. Plans and ensures the quality, schedule and cost compliance of the installation, operation, maintenance configuration, troubleshooting, and repairs of general-purpose commercial and military-unique systems. Leads the preparation of engineering plans and site installation technical design packages.

Minimum Years of Experience: No minimum years of experience required.

918-430-3426 47QSWA19D005Y Page 7

Lead Site Engineer

Position Description: Provides general support on program applications, designs and solutions. Review technical specifications and drawings for applicable compliance and effective integration of multiple subsystems.

Maintenance Manager

Position Description: Oversee and supervise the operations and maintenance of equipment specific to access control facilities including alarm systems, access devices to include installation, maintenance of any related security systems.

Mechanical Technician

Position Description: Applies advanced technical knowledge to solve unusually complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, isolating malfunctions, and incorporating engineering changes. Work typically requires a detailed understanding of the interrelationships of circuits. Uses complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

Network Specialist

Position Description: Performs a variety of engineering tasks which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with minimal latitude for un-reviewed actions and decisions. Plans and performs engineering research, design development and other assignments in conformance with design, engineering and customer specifications. Responsible for the technical/engineering part of a major project of lesser complexity than those assigned to a higher-level engineer.

Network Technician

Position Description: Performs a variety of engineering tasks which are broad in nature and are concerned with the design and implementation, including personnel, hardware, software and support facilities and/or equipment. Performs with minimal latitude for un-reviewed actions and decisions. Plans and performs engineering research, design development and other assignments in conformance with design, engineering and customer specifications. Responsible for the technical/engineering part of a major project of lesser complexity than those assigned to a higher-level engineer.

918-430-3426 47QSWA19D005Y Page 8

OEM Certified Engineer

Position Description: Provides mechanical designs and program reviews. Designs and reviews mechanical schematics and system operation measures. Can perform high level troubleshooting and system diagnosis of in depth electrical problems. Provides support to in field personnel.

OEM Certified Technician

Position Description: Monitors and responds to complex technical control facility hardware and software problems utilizing a variety of hardware and software testing tools and techniques. Provides primary interface with contractor support service groups or provides internal analysis and support to ensure proper escalation during outages or periods of degraded system performance. May provide network server support. Requires extensive knowledge of PC/network communications hardware/software in a multi-protocol environment, and network management software.

OEM Software/Systems Technician

Position Description: Monitors and responds to complex technical control facility hardware and software problems utilizing a variety of hardware and software testing tools and techniques. Provides primary interface with contractor support service groups or provides internal analysis and support to ensure proper escalation during outages or periods of degraded system performance. May provide network server support. Requires extensive knowledge of PC/network communications hardware/software in a multi-protocol environment, and network management software.

Planner Scheduler

Position Description: Provides and manages project and program specific master and task order specific schedules.

Program Manager

Position Description: The PM is a senior level manager and directs the performance of a variety of related projects which may be organized by program or client. Oversees programmatic and technology level development and allocates resources to meet program and project deliverables.

Years of Experience: 4

Project Manager

Position Description: Manages the performance of a variety of related projects which may be organized by technology, program or client. Oversees the development and/or application, marketing, and resource allocation within program client base.

918-430-3426 47QSWA19D005Y Page 9

Service Manager

Position Description: Provides and manages project and program specific master and task order specific schedules.

Systems Engineer

Position Description: Provides electrical designs and program reviews. Designs and reviews electrical schematics and system operation measures. Can perform high level troubleshooting and system diagnosis of in depth electrical problems. Provides support to in field personnel.