WARRANTY AND SALIENT CHARACTERISTICS.docx.pdf

SALIENT CHARACTERISTICS FOR SCHWING MODEL SP305 TIER 4

NAVFAC FACILITIES NORTH ISLAND IS REQUESTING 1 EACH SCHWING MODEL SP305 TIER 4

STATIONARY CONCRETE PUMP

The minimum requirements/characteris�cs are as follows:

Twin-cylinder open loop all-hydraulic concrete pump provides smooth output up to 30 cubic yards per hour with industry leading fuel efficiency.

Schwing Control Technology (SCT) CAT Tier 4 diesel engine

Remote Control cable or optional radio remote

PUMP MUST IINCLUDE ALL THE BELOW COMPONENTS

Theory. Concrete Output per Hour (cubic yards - cubic meters) 30 23 Maximum Pressure on Concrete (psi - bar) 625 43

Maximum Aggregate Size (in. - mm) .75 19 Concrete Cylinder Diameter (in. - mm) 5 125

Differential Cylinder Diameter (in. - mm) 2.5 / 1.75 63 / 45 Concrete Cylinder Stroke Length (in. - mm) 30 760

Maximum Pump Strokes per Minute 40 Main Hydraulic Pump A10V045 Volume Control 0% to Maximum

Concrete Valve Type Transfer Tube Shifting Cylinders 2

Hydraulic Tank Capacity (gallons - liters) 35 133 Hydraulic System Open Loop

Hopper Height (in. - mm) 51 1,295 Hopper Capacity (cubic feet - cubic meters) 8 .24

Outlet Diameter (in. - mm) 4 HD 100 HD Engine Model - Tier 4 Final CAT 2.2

Engine Power (horsepower - kilowatt) 48.8 36.4 Fuel Tank Capacity (gallon - liter) 19 72

Axle Single Standard Axle Capacity Rating (pounds - kilograms) 5,500 2,500

Tires ST 225/75R15 Brakes Electric

Outrigger Legs Manual Standard Length (in. - mm) 146 3,708 Width (in. - mm) 70 1,778 Height (in. - mm) 77 1,956

Trailer Units Weight (pounds - kilograms) 4,320 1,960 Remote Control Cable (feet - meters) 100

PUMP MUST INCLUDE SAME PRODUCT AND CATERPILLAR MOTOR WARRANTY

Schwing America, Inc. (“Schwing”) warrants its new equipment against defects in material and workmanship under Normal use and service, provided such equipment shall not have been subject to misuse, negligence or accident, for a period of Twelve months from the date of purchase, or 2000 hours of use, whichever shall occur first? Schwing warrants new spare parts against defects in material and workmanship for a period of six months from the date of purchase.

This warranty shall not apply to any equipment or spare parts which shall have been loaded or operated beyond their Rated capacity as specified by Schwing. Damage resulting from improper installations, alterations or neglect of recommended Maintenance will be considered as misuse and not as a defect. Certain parts of the equipment, such as, but not limited to, the Pumping cylinders, pumping rams, concrete pump systems, mixer drums and chutes, are subject to normal wear. Normal wear is Not covered under this warranty. Your Schwing equipment is designed to operate with only Schwing OEM products.

Use of non- Schwing OEM products voids any warranties provided by Schwing

CATERILLAR LIMITED WARRANTY

Caterpillar Inc. or any of its subsidiaries (“Caterpillar”) warrants new and Remanufactured 3000 Family, C0.5 through C4.4, and ACERT industrial Engines sold by it, to be free from defects in material and workmanship.

ACERT industrial engines refer to the C6.6, C7, C7.1, C9, C9.3, C11, C13, C15, C18, C27, and C32 engine models.

The standard warranty period for new and remanufactured 3003, 3011, 3013, 3014, 3024, C0.5, C0.7, C1.1, C1.5, C1.6, C1.7, and C2.2 engines Used in mobile agricultural, industrial and locomotive applications is 24

Months or 2000 hours, whichever occurs first (with the first 12 months at?

Unlimited hours) after the date of delivery to the first user.

The standard warranty period for new and remanufactured 3034, 3044, 3054, 3056, C2.8, C3.4, C3.6, C4.4, C6.6 and C7.1 engines used in

Mobile agricultural, industrial, and locomotive applications is 24 months Or 3000 hours, whichever occurs first (with the first 12 months at

Unlimited hours) after the date of delivery to the first user.

Low Usage: In cases where the engine use does not exceed 500 Hours per year, the warranty period is extended for one additional

Year or until the engine use reaches a total of 1500 hours in the 3rd year of warranty, whichever occurs first, after the date of

Delivery to the first user.