47QSSC-24-A-0786_merge.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

1. REQUISITION NUMBER PAGE 1 OF 35

2. CONTRACT NUMBER 3. AWARD/

EFFECTIVE DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION

ISSUE DATE

47QSSC-24-A-0786 4/4/2024

7. FOR

SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

Laura Garcia (laura.garcia@gsa.gov) 817-850-8259 4/15/2024; 1:00 CT

9. ISSUED BY CODE 10. THIS ACQUISITION IS UNRESTRICTED or SET ASIDE % FOR General Services Administration SMALL BUSINESS

WOMEN-OWNED SMALL

BUSINESS (WOSB)

NORTH AMERICAN

INDUSTRY

CLASSIFICATION

STANDARD (NAICS) Southwest Supply & Acquisition Center (QSCCBA) HUBZONE SMALL

BUSINESS

ECONOMICALLY

DISADVANTAGED

819 Taylor Street, Room 7A37 SERVICE-DISABLED

VETERAN-OWNED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

332999

SIZE STANDARD

500 Fort Worth, Texas 76102-6105 SMALL BUSINESS

(SDVOSB)

8(A)

11. DELIVERY FOR FREE ON

BOARD (FOB)

DESTINATION UNLESS

BLOCK IS MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A RATED

RATED ORDER UNDER THE

DEFENSE PRIORITIES AND

ALLOCATIONS SYSTEM –

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

(select one)

Request For Quote (RFQ)

SEE SCHEDULE

15. DELIVER TO CODE 16.ADMINISTERED BY CODE

To be shown on each order issued under any contract resulting from this solicitation.

Same as block #9

17a. CONTRACTOR/

OFFEROR

CODE FACILITY

CODE 18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH

ADDRESS IN OFFER

18b. SUBMIT INVOICE TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19. 20. 21. 22. 22. 24.

ITEM NUMBER SCHEDULE OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

***Please use the Schedule of Items provided on page 5***

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS

ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON

ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT REFERENCE OFFER

DATED . YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING

ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS

ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE

SIGNED

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

Laura Garcia

Contractng Officer

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

19. 20. 21. 22. 22. 24.

ITEM NUMBER SCHEDULE OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTACT, EXCEPT AS NOTED _________________

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE

32g. EMAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER

NUMBER

35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT 37. CHECK NUMBER

PARTIAL FINAL COMPLETE

PARTI

AL FINAL

STOCK RECORD (S/R) 40. PAID BY

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER

42a. RECEIVED BY (Print)

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

42b. RECEIVED AT (Location)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE RECEIVED (MM/DD/YYYY) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 11/2021) BACK

47QSSC-24-A-0786

This is a Request for Quotations (RFQ) for a single award, open market Blanket Purchase Agreement (BPA). Pursuant to FAR 13.303-5, this BPA is anticipated to cover a performance period not to exceed five-years. Since demand can fluctuate significantly up or down due to market conditions, this agreement will be awarded as not to exceed $250,000, or one-year, whichever occurs first.

The Agreement will be reviewed annually for continuation consideration. The estimated quantities for this BPA are indicated on page(s) 5 of this RFQ. Federal Acquisition Service, Southwest Supply and Acquisition Center (SSAC) may issue orders against this BPA for items listed herein. This is not a contract. A binding agreement only arises if the SSAC issues an order and the order is accepted by the BPA-holder. Estimates contained herein are provided for informational purposes only. There is no guarantee that any orders or any specific amount of orders will be issued. Any delivery orders issued will be pursuant to the evaluation of the quotations received. This is only a request for pricing. DO NOT SHIP.

A. Pursuant to FAR 13.303-3(a) the following terms are mandatory:

1. Description of Agreement: The BPA Holder shall provide the required supplies when requested by a

GSA Contracting Officer or authorized representative of the Contracting Officer, contingent upon the BPA holder’s ability to provide the required supply item(s).

2. Extent of Obligation: The Government is obligated only to the extent of authorized purchases actually made under the BPA.

3. Purchase Limitation: In accordance with FAR 13.303-5(b)(2), the dollar amount for each individual purchase order under this BPA will be limited to $7 million or less.

4. Individuals Authorized to Purchase Under the BPA: The use of this BPA will be limited to GSA.

Purchases may only be made by GSA contracting staff.

5. Delivery Tickets: Delivery tickets or sales slips shall contain supplier name, BPA number, date of purchase, requisition number, itemized list of supplies, & quantity, unit price, and extension of each item.

6. Invoices: An itemized invoice shall be submitted at least monthly or upon expiration of this BPA, whichever occurs first, for all deliveries made during a billing period and for which payment has not been received. These invoices need not be supported by copies of delivery tickets.

invoices need not be supported by copies of delivery tickets.

B. See page 33 for evaluation factors for award.

C. Delivery terms for any orders issued will be FOB Destination, direct delivery orders to any CONUS location within 5 business days after receipt of order.

D. The Schedule of Item(s) and Item Purchase Description(s) are shown on page(s) 5 thru 8.

E. Clauses, applicable to any orders issued under this BPA, are shown on pages 9 thru 33.

F. In accordance with FAR 12.302(a), the provision at FAR 52.212-1, Instructions to Offerors – Commercial Items (SEP 2021) are hereby tailored in paragraph (c) & (d) “Period for Acceptance of Offers” and “Product Samples”, are deleted, paragraph (e) “Multiple Offers.” is replaced with “single offer”, and; (h)

“Multiple awards.” is replaced with a “Single award agreement” to be issued as a result of this RFQ.

G. Price increases, regarding any subsequent BPA, will be a matter for negotiation.

H. When responding to this RFQ, the entire, completed document is required. Vendors are responsible for submitting completed quotes, so as to reach the Government office designated in the RFQ by the time specified (See Block 8). It is preferred that each quote package be submitted as an attachment and emailed to laura.garcia@gsa.gov. Mailed quotes can be sent to the address in block 9. If a quote is received later than the exact time specified in block 8 of the RFQ, it will be considered “late” and will not be considered for award.

I. There will be no minimum order requirement.

J. This is notice that the Government intends to evaluate quotes and award will be made on initial quotes, and advises vendors to submit their best terms and prices in their initial quotation.

K. The awardee will be required to ship to APO/FPO addresses, and to ships, when they receive orders that indicate these types of ship-to addresses. This is a mandatory requirement.

L. If supplies shipped are not packaged, packed, and marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/ remarking, by contract or otherwise, and charge the Contractor therefore at the following rates:

First Hour - $150.00 Each Additional Hours - $70.00

A minimum of 2 hours is required for each incident, making the minimum charge for remarking $220.00

The Contractor may also be charged for material costs, if incurred. This right is not exclusive and is in addition to other rights or remedies provided for in this contract. The rates above shall be determined and may be periodically updated by the Commissioner, Federal Acquisition Service, or a designee."

Signature Date

M. SUPPLEMENTAL DOCUMENTATION REQUIRED:

1. DESCRIPTIVE LITERATURE/DRAWINGS. Clear identification is the sole responsibility of the quoter and descriptive literature for ALL the products being offered is required at the time of quote. The Government will use this descriptive literature as a means of verifying product compliance with the Item Purchase Description(s) (IPDs). Pursuant to FAR 52.211-6 Brand Name of Equal, if you are quoting an “equal” item, your quote must provide sufficient literature identifying the page and paragraph where the information can be found to show compliance with each salient feature.

**FAILURE TO PROVIDE THE SUPPLEMENTAL DOCUMENTATION IDENTIFIED IN #1 ABOVE MAY

RESULT IN YOUR QUOTATION BEING CONSIDERED NON-COMPLAINT AND MAY RECEIVE NO

FURTHER CONSIDERATION FOR AWARD**.

N. Following is how you can obtain specifications:

Commercial Item Descriptions - https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in “Document Number” field and hit Search.

FED Specs – Copies of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in “Document Number” field and hit Search.

MIL Specs - Copies of these documents are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://quicksearch.dla.mil/qsSearch.aspx. Type the document name in the "Document ID" field or document number in “Document Number” field and hit Search.

ANSI Standards - Application for copies of ANSI standards should be addressed to American National Standards Institue,25 West 43rd Street, 4th floor, New York, NY 10036. Telephone: 212-642-4900, Fax:

212-398-0023. www.ANSI.org. (ANSI does charge for their services.)

ASTM Standards- Application for copies of ASTM standards should be addressed to ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Telephone: 610-832-9585, FAX: 610-832- 9555. www.astm.org. (ASTM does charge for their services.)

https://quicksearch.dla.mil/qsSearch.aspx https://quicksearch.dla.mil/qsSearch.aspx https://quicksearch.dla.mil/qsSearch.aspx http://www.ansi.org/ http://www.astm.org/

AWWA Standards - Application for copies of AWWA standards should be addressed to American Water Works Association 6666 W. Quincy Ave., Denver, CO 80235. www.AWWA.org. (AWWA does charge for their services.)

NSF Standards - Application for copies of NSF/ANSI standards should be addressed to NSF International, PO Box 130140, 789 N. Dixboro Road, Ann Arbor, MI 48113-0140. www.NSF.org. (NSF does charge for their services.)

UL Standards - Application for copies of UL standards should be addressed to UL Headquarters, 333 Pfingsten Road, Northbrook, IL 60062. www.UL.com. (UL does charge for their services.)

SAE Standards - Application for copies of SAE standards should be addressed to 400 Commonwealth Drive, Warrendale, PA 15096. www.SAE.org. (SAE does charge for their services.)

Recycled Material - Information related to the EPA’s Comprehensive Procurement Guidelines (CPG) for recovered materials can be found at https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program.

Biobased/BioPreferred Products - Information related to the USDA’s BioBased and BioPreferred program can be found at can be found at https://www.biopreferred.gov/BioPreferred/.

VOC Products - Information related to the California Air Resources Board Volatile Organic Compounds regulations can be found at https://www.arb.ca.gov/consprod/regs/regs.htm.

DOE Energy Star Products - Information related to the DOE Energy Star products can be found at https://www.energystar.gov/.

Energy-Efficient Products - Information related to Federal Energy Management Program (FEMP) Energy- Efficient products can be found at https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_desig nated_products_procurement_requirements.

Water-Efficient Products - Information related to the Water-Efficient Products can be found at https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_desig nated_products_procurement_requirements.

O. Deliveries to civilian activities: Supplies shall be marked in accordance with Federal Standard 123, edition in effect on the date of issuance of the solicitation.

Deliveries to military activities: Supplies shall be marked in accordance with Military Standard 129, edition in effect on the date of issuance of the solicitation.

P. GSA’s Order Management Service (OMS) will process orders utilizing only Electronic Data Interchange (EDI) or Vendor Portal (VP). Facsimile transmitted orders will no longer be an option.

EDI provides for fully electronic processing of all ordering transactions

VP provides an internet portal for vendors to retrieve orders and manually input transactional data.

EDI is the preferred business transaction processing method, but vendors with small order volumes and less technical proficiency may use VP for reasons of lower overall costs and/or higher implementation costs for EDI.

Vendors are hereby notified that all new awardees are required to select either Electronic Data Interchange (EDI) or OMS Vendor Portal (VP) to interface with GSA Southwest Supply and Acquisition Center on receiving orders resulting from their award. EDI is the preferred method of order transmission to our vendors but OMS Vendor Portal is an acceptable means of transmission. Utilization of these resources also requires the vendor to update the various stages of purchase order processing status in OMS. This is a mandatory requirement. Failure to do so may result in termination of the BPA.

Vendors are required to review the instructions regarding enrollment in either one of these systems and processes contained in Attachment 1 of this solicitation/RFQ.

http://www.awwa.org/ http://www.nsf.org/ http://www.ul.com/ http://www.sae.org/ https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program https://www.biopreferred.gov/BioPreferred/ https://www.arb.ca.gov/consprod/regs/regs.htm https://www.energystar.gov/ https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_designated_products_procurement_requirements https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_designated_products_procurement_requirements https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_designated_products_procurement_requirements https://www4.eere.energy.gov/femp/requirements/laws_and_requirements/energy_star_and_femp_designated_products_procurement_requirements

Enrollment in either program is required upon award and must be requested no later than 5 days after receipt of award. Failure to enroll may cause your award to be cancelled or terminated.

For further instructions on how to enroll in either program please contact the following:

EDI: GSAEDI@gsa.gov or EDI Help Desk at 703-605-9444 / Vendor Portal: etoolshelpdesk@gsa.gov or the eTools Help Desk at 866-472-9114

Q. Provisions, Clauses, and Fill-ins located on pages 9-33 which are highlighted in YELLOW require completion by the quoter. Any quote received that is not fully completed or lacks pages may be subject to a determination of non-compliance and may be no longer considered for award.

R. A foreign corporation that is selected for the award must have an agent who resides in the United States and a physical address (not a P.O. Box) in the United States prior to award of this BPA. A foreign corporation holding this BPA must, during the course of performance, continually maintain a physical address and an agent in the United States so that the government can communicate effectively with the foreign corporation. If you are a foreign corporation, please indicate that you understand this requirement and that you have an agent and a physical address (not a P.O. Box) in the United States. Not providing this assurance in your quote or not having these resources located in the United States will lead to finding your quote noncompliant and it will no longer be considered for award.

Signature Date

ALL COMPLETED PAGES (1-33) AND DESCRIPTIVE LITERATURE MUST BE RETURNED WITH YOUR

QUOTE. FAILURE TO PROVIDE THE REQUIRED INFORMATION MAY RESULT IN YOUR QUOTE NO

LONGER BEING EVALUATED OR CONSIDERED FOR AWARD.

Request for Quotation # 47QSSC-24-A-0786 Dated: 4/4/2024

A. Data Universal Numbering System (DUNS): ______________________

B. Point of Contact: _______________________

Phone Number: _______________________

Fax Number: __________________________

E-mail Address: _______________________

Are you a large or small business? __________________

Are you a manufacturer or dealer? __________________

C. Supplier Name*: ___________________________

Point of Contact*: __________________________

Supplier DUNS*: ___________________________

Supplier TIN*: _____________________________

Is your supplier large or small? _________________

(Please complete the Supplier’s name, TIN and DUNS number for each NSN if different)(Note: “Supplier” refers to the company providing you the product, if you are not the manufacturer).

mailto:GSAEDI@gsa.gov mailto:etoolshelpdesk@gsa.gov

SCHEDULE OF ITEMS

Use the Schedule of Items below to submit quoted prices.

NOTE: THIS IS ONLY A REQUEST FOR PRICING. ANY ORDERS ISSUED WILL BE PURSUANT TO THE EVALUATION OF THE QUOTATIONS RECEIVED. PRICING FOR THE ITEM(S) SHALL BE COMPLETED

BELOW:

A. Provide the unit price per the unit of issue shown and the Total Destination BPA Price.

B. Pricing will be FOB Destination to CONUS locations.

C. Provide the Manufacturer’s Name, Part Number, and Country of Origin (COO).

D. Delivery will be made 5 business days after receipt of order.

E. The Total Annual BPA Price will be considered for award.

NAICS: 332999 500 Employees

Quoter must enter the weight and cube for each item:

DELIVERY TIME: _____________________________

COUNTRY OF ORIGIN: ________________________

END SCHEDULE OF ITEMS

Item No.

NSN/Description

Brand Name and Manufacturer’s

Part Number

Est’d

Orders (12-Month)

Est’d (12-Month)

Unit of

Issue

Total Destination BPA Unit Price (Including Freight)

1.

CONUS

NSN: 4010-00-171-4426

Welded Chain IPD Attached

69 468 EA

2.

CONUS

NSN: 4010-00-171-4427

Chain Assembly, Single Leg IPD Attached

155 1,865 EA

Total BPA Price (Annual BPA Total X 1 Year) $

Annual BPA Total (Total Destination BPA Unit Price X Est. 12-month Qty. for Each Item)__$____________________

1.

4010-00-171-4426

Each Weight__________

Each Cube__________

2.

4010-00-171-4427

Each Weight__________

Each Cube__________

ITEM PURCHASE DESCRIPTIONS

1. NSN: 4010-00-171-4426 (DATED 6/2/2023)

CHAIN, WELDED: Shall be in accordance with Federal Specification

RR-C-271H w/ Amendment 1, dated January 3, 2022, with the following characteristics:

Type I, class 4, welded steel proof-coil chain in accordance with ASTM A413/A413M, grade 30.

ASTM A413/A413M Table 1 Grade 30 Proof Coil Chain characteristics:

Nominal Chain Size: 5/16 inch

Material diameter: 0.331 inch

Working Load Limit, max: 1900 lb

Proof Test, min: 3800 lb

Minimum Breaking Force: 7600 lb

Inside Length, max: 1.29 inches

Inside Width, min: 0.44 inch

The proof-coil chain shall be uncoated and shall have a length of 14 feet.

Chain shall be furnished with the following attachments in accordance with RR-C-271G:

Two grab hooks (one at each end of the chain), size 5/16 inch, Type V, Class 4, Style 2E

Unit of Issue - EA (Each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping

Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the

Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-

75 and/or with the latest requirements of ASTM D-3951 Standard

Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General

Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using

Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood

Packaging Material for Export, or the applicable requirements in

ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

2. NSN: 4010-00-171-4427 (DATED 8/25/2022)

CHAIN ASSEMBLY, SINGLE LEG: Shall be in accordance with Federal

Specification RR-C-271H w/ Amendment 1, dated January 3, 2022, with the following characteristics:

Type I, class 2, welded steel high-test chain in accordance with

ASTM A413/A413M, grade 43.

ASTM A413/A413M Table 2 Grade 43 High Test Chain characteristics:

Nominal Chain Size: 3/8 inch

Material diameter: 0.406 inch

Working Load Limit, max: 5400 lb

Proof Test, min: 8100 lb

Minimum Breaking Force: 16,200 lb

Inside Length, max: 1.38 inches

Inside Width, min: 0.55 inch

The high-test chain shall be uncoated, and shall have a length of 20 feet.

Chain shall be furnished with the following attachments in accordance with RR-C-271H w/ Amendment 1:

Two eye grab hooks (one at each end of the chain), size 3/8 inch, Type V, Class 2, Style 2E

Unit of Issue - EA (Each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping

Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the

Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-

75 and/or with the latest requirements of ASTM D-3951 Standard

Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General

Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using

Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood

Packaging Material for Export, or the applicable requirements in

ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

END OF ITEM PURCHASE DESCRIPTIONS

Administration Data

CONTACT FOR BPA ADMINISTRATION

Quoters are required to designate a person to be contacted for prompt contract administration.

NAME ________________________________________________________________________

TITLE ________________________________________________________________________

ADDRESS ____________________________________________________________________

_______________________________________________ ZIP CODE ___________________

TELEPHONE NO. (_______) _____________________ FAX NO. _____________________

BPA Provisions

52.252-1 PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer.

Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

The address for the FAR is https://www.acquisition.gov/and the address for GSAM is https://www.acquisition.gov/browse/index/gsam

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016)

52.212-1 INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS (NOV 2021)

52.214-21 DESCRIPTIVE LITERATURE (APR 2002)

52.204-24 REPRESENTATIONS REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLENCE SERVICES OR EQUIPMENT (DEC 2019)

The Offeror shall not complete the representation in this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services- Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision— “Covered telecommunications equipment or services”, “critical technology”, and “substantial or essential component” have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, https://www.acquisition.gov/browse/index/gsam https://www.acquisition.gov/content/52204-26-covered-telecommunications-equipment-or-services-representation#id19CAC0P0ESS https://www.acquisition.gov/content/52212-3-offeror-representations-and-certifications-commercial-items#i1060550 https://www.acquisition.gov/content/52204-25-prohibition-contracting-certain-telecommunications-and-video-surveillance-services-or-equipment#id1989I600I4C system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing—

(1)A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(d) Representation. The Offeror represents that it □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.

(e) Disclosures. If the Offeror has represented in paragraph (d) of this provision that it “will” provide covered telecommunications equipment or services”, the Offeror shall provide the following information as part of the offer—

(1) A description of all covered telecommunications equipment and services offered (include brand;

model number, such as original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable);

(2) Explanation of the proposed use of covered telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph

(b) of this provision;

(3) For services, the entity providing the covered telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known); and

(4) For equipment, the entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

(52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR

A FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing

Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that—

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that— https://www.sam.gov/

(1) It is □ is not □ a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is □ is not □ a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of Provision)

52.212-3 OFFEROR REPRESENATIONS AND CERTIFICATIONS-COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2021)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v)) of this provision.

(a) Definitions. As used in this provision— "Covered telecommunications equipment or services" has the meaning provided in the clause 52.204- 25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

https://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_204_25 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"—

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veteransor, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships.

SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that— https://www.acquisition.gov/far/part-52#FAR_52_204_25 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C.

101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it □ is, □ is not a small business concern.

http://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-4#FAR_4_1201

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-

(i) It □ is, □ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-

(i) It □ is, □ is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order11246-

(1) Previous contracts and compliance. The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs…