10 RFQ SQ (4) 47QSEA-19-Q-0321 LH.pdf

47QSEA-19-Q-0321

GSA Northeast and Caribbean Region

General Services Administration

Northeast & Caribbean Supply and Acquisition Center

Stand Quote Number: 47QSEA-19-Q-0321

This document is a Request for Quotation (RFQ) in order to award a direct delivery S t a n d i n g Q u o t e (SQ.. This Standing Quote will be a small business set-aside firm fixed price. It will be awarded FOB Destination pricing using the evaluation criteria of lowest price technically acceptable (LPTA).. The commodity being procured is 5 NSN’s, Card Business and Appointment Book’s.

Trade Agreement Act (TAA) compliant NSN’s included and Non compliant.

Terms and conditions have been specified within the terms and conditions of this document.

Additionally, the awardee was provided the Government’s Item Purchase Descriptions (IPDs) and all quoted items will be reviewed by the Northeast & Caribbean Supply and Acquisition Center’s technical service branch for acceptability of specifications and compliance.

DAVID

KOSIOREK

Digitally signed by DAVID

KOSIOREK

Date: 2019.11.06 09:42:06 -05'00'

1. Introduction

RFQ number, 4QSEA-19-Q-0321 will result in one award to a small business OPEN Market vendors for

Card Business and Appointment Book’s NSNs with FOB Destination pricing. In accordance with FAR

13, OPEN MARKET vendors that are considered to be small businesses will be solicited and may be considered for award. Vendors that are considered to be small businesses will be solicited and may be considered for award. The awardee will receive various notices to deliver throughout the year as supplies are needed for direct delivery to GSA customers within the Continental United States (CONUS) and outside the Continental United States (OCONUS). All annual requirements being requested are considered estimates and are not guaranteed.

1.1 Points of Contact for GSA:

LaTanya Harrison

David Kosiorek

Contracting Officer General Services Administration Northeast & Caribbean Supply and Acquisition Center Phone: 212-264-2679 Email: latanya.harrison@gsa.gov

Contracting Officer General Services Administration Northeast & Caribbean Supply and Acquisition Center Phone: 347-952-9745 Email:

david.kosiorek@gsa.gov

2. Period of Performance:

2.1 Provide direct delivery contract coverage in support of GSA customers within (CONUS) and outside (OCONUS) of the continental United States.

* Most of the OCONUS orders are going to stateside consolidation point addresses and are FOB Destination. Please quote a price for CONUS FOB Destination.*

2.2 The period of performance of this Standing Quote is for a one year base period from the date of award in accordance with the customers described in 2.1.

3. Evaluation Factors:

Following solicitation on www.fedbizopps.gov, this RFQ will be awarded based upon on a Line by Line determination in accordance with In accordance with FAR 13, Award will be made using the evaluation criteria of LPTA. A responsibility determinat ion will also be made for the proposed awardee prior to award. The determination will include a review of FAPIIS, EPLS, SAM, GSA report cards and a review of the proposed awardee’s past performance.

3.1 Price Evaluation

This Standing Quote will be awarded based on line by line basis with award being made to the lowest price technically acceptable. Technical specifications include compliance with IPD and delivery terms outlined in this solicitation.

The vendor’s proposed products were reviewed by the Northeast & Caribbean Supply and Acquisition Center’s Technical Services Branch to verify that they meet all requirements of the Government’s ITEM PURCHASE AGREEMENT.

7530-01-418-1504 UI: BX

CARDS, BUSINESS

DESCRIPTION

ITEM NAME CARDS, BUSINESS

ACCOMMODATED CARD WIDTH 2.000 INCHES

ACCOMMODATED CARD LENGTH 3.500 INCHES

OVERALL SHEET WIDTH 8.500 INCHES

OVERALL SHEET LENGTH 11.00 INCHES

OVERALL COLOR IVORY

FINISH TYPE MATTE

MICRO-PERFORATION FEATURE INCLUDED

UNIT PACKAGE FORM BOX

UNIT PACKAGE QUANTITY 10 BUSINESS CARDS PER SHEET

25 SHEETS (250 BUSINESS CARDS TOTAL) PER BOX

PACKAGING/PACKING: Twenty-five (25) sheets (totaling 250 business cards) shall be packaged in a box in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007.

For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MI LSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

The contractor shall certify that the product offered shall include 50 percent recovered fiber, including a minimum of 20 percent postconsumer fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7530-01-332-1560 UI: EA

BOOK, APPOINTMENT

DESCRIPTION

ITEM NAME BOOK, APPOINTMENT

I.A.W. FRANKLIN COVEY - P/N 28880 OR EQUAL COMMERCIAL

ACCOMMODATED SHEET WIDTH 5.500 INCHES

ACCOMMODATED SHEET LENGTH 8.500 INCHES

OVERALL WIDTH 10.50 INCHES

OVERALL HEIGHT 8.300 INCHES

OVERALL DEPTH 2.000 INCHES

OVERALL RING CAPACITY 1.250 INCHES

OVERALL WEIGHT 3.000 LBS

UNIT TYPE CLASSIC

OVERALL COLOR BURGUNDY

OVERALL MATERIAL LEATHER, ARTIFICIAL

RING QUANTITY 3

OVERALL PAGE CAPACITY 250

CLOSURE METHOD ZIPPER

CLOSURE LOCATION SIDE

BOOK INCLUDES - BINDER

- PHOTO HOLDER

- ZIPPER POUCH

- TWO MONTHS OF FLEX-DATED DAILY PAGES

- ONE SET OF 1-31 NUMERICAL TABS (MONARCH AND

CLASSIC SIZE ONLY)

- FULL YEAR OF FLEX-DATED CALENDAR TABS AND

ADDRESS / PHONE TABS

SPECIAL FEATURE USER FLEXIBILITY TO PLAN ANYTIME

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007.

For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MI LSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

REGULATORY REQUIREMENTS: The contractor shall certify that the product offered shall contain a minimum of 30% recovered fiber, including 30% postconsumer fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by

7530-01-332-1561 UI: EA

DESCRIPTION

ITEM NAME BOOK, APPOINTMENT

ACCOMMODATED SHEET WIDTH 8.500 INCHES

ACCOMMODATED SHEET LENGTH 11.00 INCHES

OVERALL BOOK WIDTH 11.00 INCHES

OVERALL BOOK LENGTH 13.25 INCHES

OVERALL BOOK DEPTH 2.000 INCHES

UNIT TYPE MONARCH

UNIT DESIGN OPEN BINDER

COVER COLOR BURGUNDY

COVER MATERIAL ARTIFICIAL LEATHER

COVER OPENING POSITION SIDE

FASTENER TYPE RING

FASTENER QUANTITY 7

CLOSURE TYPE ZIPPER

SECTION TYPES KEY ACTION; PLANNING; COMM

SPECIAL FEATURES DESK SIZE; ADDED FLEXIBILITY TO START

PLANNING ANYTIME

INCLUDES BINDER; PHOTO HOLDER; ZIPPER POUCH; TWO MONTHS

OF

FLEX-DATED DAILY PAGES; ONE SET OF 1-31

NUMERICAL

TABS (MONARCH AND CLASSIC SIZE ONLY); FULL YEAR

OF

FLEX-DATED CALENDAR TABS; ADDRESS / PHONE

TABS;

NOTE PAD; PEN LOOPS; BUSINESS CARD HOLDER;

RECEIPTS POUCH.

ENVIRONMENTAL FIELDS

TE.3. Comprehensive Procurement Guideline Compliant

This product has been certified to meet or exceed the U.S. Environmental Protection Agency Recovered Material Advisory Notice (RMAN) standard for recovered materials as specified in the Resource Conservation and Recovery Act Section 6002 Comprehensive Procurement Guideline. Minimum recovered material content shall be 20% for white, off-white, pastel colors, 50% for gray, brown, earthtone, other dark colors, 100% for consolidated latex paint to be used for covering graffiti where color and consistency of performance are not primary concerns.

Applies to item(s):

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007.

For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MI LSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

REGULATORY REQUIREMENTS: The contractor shall certify that the product offered shall contain a minimum of 30% recovered fiber, including 30% postconsumer fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by

7530-01-366-5856 UI: EA

DESCRIPTION

ITEM NAME BOOK, APPOINTMENT

OVERALL WIDTH 5.50 INCHES

OVERALL LENGTH 8.50 INCHES

COVER COLOR BLACK

COVER MATERIAL LEATHER, ARTIFICIAL

COVER OPENING POSITION SIDE

FASTENER TYPE RING

FASTENER QUANTITY 3

CLOSURE TYPE ZIPPER

INCLUDES BINDER

PHOTO HOLDER

ZIPPER POUCH

TWO MONTHS OF FLEX-DATED DAILY PAGES

ONE SET OF 1-31 NUMERICAL TABS (MONARCH AND

CLASSIC)

FULL YEAR OF FLEX-DATED MONTHLY CALENDAR TABS

commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007.

For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MI LSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

REGULATORY REQUIREMENTS: The contractor shall certify that the product offered shall contain a minimum of 30% recovered fiber, including 30% postconsumer fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by

7530-01-308-7293 UI: EA

DESCRIPTION

A Postage Paid card is included with package to allow end user to send in to the Franklin Covey Company for a free current year dated calendar.

ITEM NAME BOOK, APPOINTMENT

ACCOMMODATED SHEET WIDTH 5.50 INCHES

ACCOMMODATED SHEET LENGTH 8.50 INCHES

BOOK WIDTH 7.80 INCHES

BOOK LENGTH 9.50 INCHES

UNIT TYPE CLASSIC

UNIT DESIGN OPEN BINDER

SIZE DESIGNATION TRAVEL SIZE

COVER COLOR BLACK

COVER MATERIAL ARTIFICIAL LEATHER

COVER OPENING POSITION SIDE

FASTENER TYPE RING

FASTENER QUANTITY 7

ZIPPER NOT INCLUDED

SECTION TYPES KEY ACTION; PLANNING; COMM

SPECIAL FEATURES ADDED FLEXIBILITY TO START PLANNING

ANYTIME

INCLUDES BINDER; PHOTO HOLDER; ZIPPER POUCH; TWO MONTHS

OF

FLEX-DATED DAILY PAGES; ONE SET OF 1-31

NUMERICAL

TABS (MONARCH AND CLASSIC SIZE ONLY); FULL YEAR

OF

FLEX-DATED CALENDAR TABS; ADDRESS / PHONE

TABS;

NOTE PAD; PEN LOOPS; BUSINESS CARD HOLDER;

RECEIPTS POUCH.

commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007.

For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MI LSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to

RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT

PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER

MATERIAL CONTENT WITHIN REASONABLE COST.

REGULATORY REQUIREMENTS: The contractor shall certify that the product offered shall contain a minimum of 30% recovered fiber, including 30% postconsumer fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by

Although in accordance with FAR 13 the proposed awardee’s quote prices may be evaluated against previous pricing, MAS pricing and commercial pricing. The government does not anticipate entering into discussions during evaluations.

3.2 Delivery

· Delivery is required within 7 business days ARO (After receipt of Order) for GSA customers within the continental United States (CONUS) and to GSA CONUS consolidation points for customer outside of the continental United States (OCONUS).

4. Ordering Procedures

Notices to deliver against this order maybe placed by one or more of the following methods:

Electronic Data Interchange (EDI) or written order. Orders will be placed based on customer requirements.

4.1 Order Status and Delivery

· GSA must have an established integrated process to enhance customer service, measure performance, and have visibility across supply chain activities. Vendor must provide proof of delivery, order tracking information and delivery confirmation status (shipping, tracking and returns) for multiple carriers via secure internet environment (HTML, XML). This would include seamless access to shipping functionality, from the time of order entry to time of delivery with integration into EDI. At a minimum, this must include translation of event data from shippers, event monitoring (with expected and actual transit times), and alert notification.

4.2 Order Items and Pricing

· Minimum dollar order value of $0.00.

· The fixed prices are not subject to modification during the year of this Standing Quote resulting from this RFQ.

Delivery:

CONUS & OCONUS: FOB Destination for ALL Part Numbers/NSNs (See Attachment A)

5.1 Free on Board (F.O.B.):

All orders to be delivered to the Continental United States (CONUS) will be shipped F.O.B.

Destination in accordance with FAR Clause 52.247-34 F.O.B. Destination (Nov 2001).

5.1.1 Continental United States (CONUS):

Delivery time required is within 7 business days ARO.

5.1.2 Outside Continental United States (OCONUS):

· Delivery time required is within 7 business days after ARO to GSA (CONUS) consolidation points for customer outside of the continental United States (OCONUS).

Overseas Shipments& Export Consideration (OCONUS):

Orders for overseas activities will be mailed to an APO/FPO address or shipped to a designated state-side location identified on the notices to deliver. Items ordered by Government customers from overseas locations are often routed through military freight processing centers and transportation channels. Special procedures relate to the recognition, packing, labeling, marking, and routing of such shipments. The vendor will be expected to book shipments in DOD’s air clearance and surface manifesting systems (GSA will arrange training as necessary). Personnel performing these tasks must undergo a National Agency Check and Inquiries (NACI) investigation.

Until necessary training can be provided, GSA intends that initially all undeliverable orders for overseas shipment will be routed through a GSA Distribution Center for export marking, packaging and shipment to a military freight processing center. This will be “phased out” once the vendor is able to export directly into the once training and adequate transition time has been provided. Vendors shall ship directly to an overseas address if a Government customer has a World Wide Express account number. For export orders over 800 cubic feet or 10,000 pounds the vendor will contact the designated GSA POC to be identified after award to arrange sea van booking. Packaging for shipments to overseas locations (i.e. where final consignee is OCONUS) must be suitable for export shipping without requiring additional preservation, or packing/packaging.

6. Export Procedures:

6.1 General:

· Shipments to GSA DOD overseas customers are shipped using the Defense Transportation System (DTS). Shipments to federal civilian agencies are shipped via the GBL (Government Bill of Lading) method.

· Shipments must be marked in accordance with FED-STD 123H for civilian agencies and MIL- STD 129R for military and Department of Defense Agencies as per GSAM 552.211-

73. . Marking requirements can be found at: https://vsc.gsa.gov/Marking Labeling Packaging

· See Attachment B below for additional Marking, Labeling and Packaging Requirements for GSA/ FAS Export Shipments.

6.2 Routing Instructions:

Vendor will comply with routing instructions contained in item 10. SHIP TO/REQUIRED MARKING of the GSA notices to deliver, GSA Form 3186, or EDI/XML. When directed, vendors must register with the GSA VANS (Value Added Network System program management office for electronic transmission of notices to deliver information from GSA to the vendor and for vendor transmission of requests for shipping instructions to a GSA regional transportation office. The appropriate GSA transportation office will determine the method and mode of shipment. Vendors will comply with the instructions from the GSA regional transportation office. Vendors are subject to payment of any charges or penalties over what would have been charged had the vendor followed the instructions from the GSA regional transportation office.

6.3 General Routing Determination:

A Container-Load (CL) shipment is defined as a shipment that is 800 cft in volume or greater and/or 10,000 lbs or greater in weight, or any shipment which will occupy at least half of a standard 20’ dryseavan, when the volume and weight of the container contents are evenly distributed over the floor of the container (for export purposes a seavan is referred to as a “container”).

6.4 DoD DTS export shipments to DoD consignees:

Shipping instructions for surface export LCL (Less-than container-Load) shipments will be provided in block 10 of the GSA notice to deliver. Routing information for export air and export Container Load (CL) shipments, and shipments consigned to US Navy vessels, will be provided by a GSA regional transportation office. Vendors will be directed to move LCL surface (water) shipments to a DOD containerization and consolidation point (CCP). The GSA regional transportation office will obtain instructions from the Navy for LCL shipments to Navy vessels, and pass these on to the vendor.

6.5 Civilian agency export shipments:

Civilian agency export CL and LCL shipments will be routed and shipped via the GBL method.

6.6 Vendor Shipping Responsibilities:

Vendors will not ship a CL shipment to a depot. CL shipments shipped to a depot will be refused and diverted to a temporary safe haven or will be booked directly to a vessel and will be delivered to a water port. Vendors shipping CL shipments to depots in violation of this rule will be responsible for reshipment charges or any charges over what it would have taken to ship the shipment had the GSA regional office routed the shipment.

6.7 FOB Destination shipments:

FOB Destination CL shipments will be booked directly to a vessel and will be routed to a CONUS (Continental United States) seaport port or, in the case of shipments to Canada and areas south of CONUS, to the point at or near the border at which the shipment will exit the CONUS. In the case of Navy shipments to vessels the vendor will be directed to deliver CL or LCL shipments to a designated receipt point.

6.8 Source Loading and/or Container Stuffing:

Container stuffing is the loading or placing of items into a seavan for export shipment. Source loading is the stuffing of a container at a vendor’s inland facility. Source loading minimizes the exposure of a shipment to damage through second handling. Source loading maintains vendor liability for damages/shortage to the container contents provided there is no external evidence of damage to the container, the seal is unbroken, or there is a damage report from a carrier that handled the container. Source loading is the express policy of GSA. Transportation and related FOB Destination charges are the vendor’s responsibility and vendors are responsible for all charges to port in gate (delivery of and transit through the port gate to ocean carriers’ port terminals). Transportation and related charges after port in gate are the responsibility of the overseas customer. Source loading provides stuffing of containers at vendors’ facilities at vendors’ expense and eliminates unnecessary costs to the customer consignee. Stuffing charges are not to be passed on to the customer unless the vendor can prove that a monetary benefit will accrue to the government/customer.

6.9 Rollovers and Advances:

GSA CL surface export shipments are booked directly to a vessel. Booking is the reservation of container space aboard a vessel. A Rollover (“roll) is the rebooking of a shipment from a vessel to which booked to an earlier vessel sailing. Vendor is responsible for notifying the GSA regional transportation office NLT 48 hours prior to the vessel cutoff date of any requirement to advance or roll a booking. Vendors are subject to $250.00 in liquidated damages for failing to notify the GSA regional transportation office of a need to advance or roll a shipment within 24 hours of the vessel/gate cutoff.

6.10 Shipping and customs documents:

Upon booking the GSA regional transportation office will furnish the vendor shipping and customs documents. Vendor will comply with instructions contained therein.

6.11 Special instructions for CENTCOM consigned containers:

Sea van(s) consigned to the Central Command (CENTCOM) area of operations (Afghanistan, Kuwait, Iraq, Qatar, etc.) are required to be fitted with a Radio Frequency Identification (RFID) tag and 72” cable seals and 1/4” bolt seals. Cable and bolt seals must be provided by the vendor, however RFID tags will be provided by GSA. It is imperative that as the container(s) is/are loaded (or as soon as possible thereafter) required information in the SHIPPING INSTRUCTIONS (DRAFT) is provided to the GSA regional transportation office. Once the GSA regional transportation office receives the required information they will prepare Radio Frequency Identification (RFID) tag(s), custom forms, and the final Sis, (Shipping Instructions) for each container. These will be Fed Ex’d to vendors before noon next day delivery. Each tag and its documents are unique to that one container, and may not be switched or substituted. Seavan(s) must remain overnight until the RFID tag(s), etc., arrive, therefore when the transportation company calls to deliver the sea van, vendors must alert them that the sea vans will be a “Drop & Pick”.

6.12 Packing, Marking, Labeling and Documentation:

Packaging, marking, labeling and documentation shall be in accordance with the requirements in the MAS contract, as well as the below:

6.12.1 Packing: Packing shall be in accordance with commercial packing requirements.

6.12.2 Packaging:

Packaging shall be in accordance with the latest edition of ASTM D 3951-98, “Standard

Practice for Commercial Packaging” available at www.ASTM.org.

6.12.3 Marking/Labeling:

· All unit, intermediate, transport packages and unit loads shall be marked for delivery to Civilian Agencies in accordance with commercial standards. (See attachment A. for a list of data elements required.) An example of a commercial shipping label is included in attachment X.

· All unit, intermediate, transport packages and unit loads shall be marked and labeled for delivery into a GSA distribution facility in accordance with FEDSTD-

123.

· All unit, intermediate, transport packages and unit loads shall be marked and labeled for delivery to military activities, including all orders destined for

OCONUS, in accordance with the latest version of MIL-STD-129, “Military

Marking for Shipment and Storage”.

· MIL-STD-129 requires that a Military Shipping Label (MSL) be affixed to the outside of the shipping container. The label includes requisition number (REQN), priority code (PRI), project code (PRO J), required delivery date (RDD), transportation control number (TCN), etc.. The required data shall be preceded by the abbreviation shown herein. The GSA Contracting Officer must approve any deviation to this label. An example of an MSL is included in attachment X.

· Labels attached to boxes that will be shipped OCONUS shall be a water-resistant grade of paper, and be protected with a clear coating that will not interfere with scanning and reading printed information.

· “Latest version” of FED-STD-123 and MIL-STD-129 is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the http://assist.daps.dla.mil/quicksearch.

6.12.4 DOCUMENTATION:

The vendor shall produce one of two different types of shipping documentation:

commercial and FEDSTRIP/MILSTRIP.

· Commercial documentation requirements. A shipping document (packing list) will be produced and provided for all packages for orders designated as commercial. The commercial shipping document will list all items included in the package or box.

· FEDSTRIP/MILSTRIP documentation will be required for all OCONUS shipments. A DD Form 1348 will be provided with these orders.

6.14 Commercial Documentation Requirement:

· A shipping document (packing list) will be produced and provided for all packages for orders designated as commercial. The commercial shipping document will list all items included in the package or box.

· Attachment 2 is a copy of a commercial shipping document with representative variable data. All variable data will be either transmitted to the contractor on the EDI 850 Notice to Deliver or derived from the contractor’s internal cataloging/product information. The commercial shipping document will be furnished with each shipment. In a one-package shipment the commercial shipment document shall be affixed to the exterior of the package using an adhesive, packing list envelope. Multi-package shipments will be clearly labeled in a manner to reference the commercial shipping document, which shall be affixed to the lead carton. For “multi-packs” (boxes containing more than one type of product) a copy of the commercial documentation shall additionally be included in the box clearly identifying box contents.

7. Status Reports of Orders and Shipment GSAM 552.242-70 (Feb. 2009)

The Contractor shall furnish to the Procuring Contracting Officer (PCO) a report covering orders received and shipments made during each calendar month of contract performance.

The information required by the Government shall be reported on GSA Form 1678, Status Report of Orders and Shipments, in accordance with instructions on the form. The information required by the GSA Form 1678 may also be submitted in an automated printout form if authorized by the PCO. Alternatively, the required information may be reported by electronic data interchange using ANSI standards. For further information, contact GSA’S Region 2 Global Supply Center, Acquisition Division (QSDJAA) or the points of contact listed in section 1.1. Reports shall be forwarded to the PCO no later than the seventh workday of the succeeding month.

A copy of GSA Form 1678 will be forwarded to the Contractor with the contract. Additional copies of the form, if needed, may be reproduced by the Contractor.

8. Special Contract Requirements

9. System Interface and Integration:

Said vendor must be able to conduct business utilizing a standardized electronic method (either EDI or web portal). All transactions will be submitted to and received by the prime contractor only. Under this BPA, GSA will not conduct electronic transactions with the prime contractor’s subcontractors or dealers.

9.1 Electronic Data Interchange (EDI) and Vendor Portal (VP)

Facsimile is not an acceptable method of receiving orders. If the successful awardee(s) is not currently receiving orders via EDI or Vendor Portal, the successful offeror will need to be on boarded into either of the aforementioned systems. Please refer to the attachment entitled Attachment C for Instructions on EDI and Vendor Portal.

10. Additional Terms and Conditions

The following FAR and GSAM terms and conditions are incorporated into the BPA by reference. The full-text of these terms and conditions may be found on-line at:

www.acquisition.gov

FAR/GSAM Clause Title

GSAM 552.211-73 Marking

GSAM 552.232-78 Payment Information

FAR 52.216-2 Economic Price Adjustments

Holding Vendors Financially Accountable:

If vendors are noncompliant with clause 52.211.73 -Marking; and all other contract clauses addressing marking, labeling, and packaging in the MAS contract, delivery order, BPA, etc., the contractor maybe charged for incorrect packaging or marking.

If supplies shipped are not packaged, packed, and marked in accordance with contract requirements, die Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/ remarking, by contract or otherwise, and charge the Contractor therefore at the following rates:

First Hour -$150.00

Each Additional Hour -$70.00

A minimum of 2 hours is required for each incident, making the minimum charge for re-marking is $220.00

The Contractor may also be charged for material costs, if incurred. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract. The rate in the above clause shall be determined and may be periodically updated by the Commissioner, Federal Acquisition Service,or a designee.

Charges, while not applicable to GSA Advantage Orders,shall be applicable to the following:

o Vendor non-compliance with 552.211-73or for any vendor actions leading to non• compliance with proper "Marking and Labeling.

o Repeated or continual frustrated freight of the vendor shipments. Once a vendor has been notified, if frustrated freight continues to occur, a minimum of $220 per instance shall apply. The Government reserves the right to increase this amount at any time in the future with 30 days' notice.'' o For more information on frustrated freight and how to avoid it, see Attachment

C- Cheat Sheet: Tips to Avoid Frustrated Freight

NOTE: For instructions/assistance with proper Packaging, Labeling, and Marking, please visit httpS://VSC.GSA.gov/MarkingLabelingPackaging/ or see Attachment B, below.

· The successful quoter(s) will be provided with a guide to avoiding Frustrated Freight and Standard Operating Procedures for the Vendor Supplier Network after award.

· The successful quoter(s) will be required to provide examples of proper labels to the contracting officer before being approved to begin shipping.

Figure 1 (Commercial Packing List)

Commercial Packing List (Fig. 1)

The Commercial Packing List data elements:

Order Level Data:

1. GSA Logo (this is not a requirement)

2. Return address:

· GSA Global Supply

· C/O Vendor Name

3. For customer service, call 1-800-525-8027 and select option 2 Customer order number (8 – 10 numeric; number is returned on the 856 transaction set)

4. Document or Requisition Number (14 A/N; returned on the 856 transaction set)

5. Printed Date (format: MM/DD/YYYY)

6. Activity Address code (six A/N; place after Ship To title)

7. Ship To Address:

· Address 1 (35 A/N; all 35 required to be visible)

· Address 2 (35 A/N; all 35 required to be visible)

· Address 3 (35 A/N; all 35 required to be visible)

· City, State, and Zip Code (35 A/N; all 35 required to be visible)

8. Marketing Message (120 A/N; all 120 must be visible, may be blank; bottom of packing slip)

9. Agency Internal code (six A/N; may be blank)

10. Priority code (PRI) (two A/N; default to 06 if blank)

· If this data is passed by the 850, provide it in the packing list.

11. Project Code (PRJ) (three A/N; may be blank)

· If this data is passed by the 850, provide it in the packing list.

12. Required Delivery Date (RDD) (three A/N; may be blank)

· If this data is passed by the 850, provide it in the packing list.

13. Transportation Control Number (TCN) (17 A/N;

may be blank)

· The TCN is optional for domestic orders.

14. Mark-for Data (two lines of 45; all 45, per line, required to be visible)

Line level data:

A. Part Number B. Description

C. Quantity Shipped and backordered D. Unit of Issue E. Extended Weight F. Unit Selling Price G. Extended Price H. Extended Order Total

1. Document or Requisition Number

Figure 2 (DD Form 1348)

Issue Release/Receipt Document (DD Form 1348) Packing List (Fig. 2)

Data Elements (DoD Usage):

· Data Identifier Format (ANSI Standard)

· Document Number

Includes Suffix Code when applicable

· National/NATO Stock Number (NSN) or Stock Identification Elements

May reflect NSN, CAGE Code/part number, FSC, etc., as applicable. May also include associated coding, e.g., Type of Pack, USN Special Material Identification Code (SMIC) or USAF Materiel Management Aggregation Code (MMAC)

· Quantity and Unit of Issue Do not include leading zeros

· Routing Identifier Code

· Condition Code

· Unit Price

Configured as 5-digit whole dollars, decimal, and 2-digit cents followed by "USD" indicating U.S. dollars. Do not include leading blanks.

· National Motor Freight Classification Commodity Number

· Data Identifier Format (ANSI Free Text)

· Project Code

· DoD Distribution Code Three-position field must reflect blanks as applicable. Blanks may be located in any position.

· Consignee DoDAAC Reflects ship-to DoDAAC (Block 3)

· Nomenclature

· Required Delivery Date (RDD)

May reflect RDD in DDD format or special codes, e.g., expedited shipment and handling (Code 999), Not Mission Capable Supply (NMCS) (Code N_J, etc.

· Requisition Priority Designator (PD)

· Partial Shipment Indicator

· Supplementary Address

Derived from rp 45-50 of the requisition

Figure 3(Commercial Shipping Label)

Commercial Shipping Label (Fig. 3)

Data Elements:

The dimensions of a commercial shipping label are approximately 4 inches by 6 inches.

The size may vary: one GSA version at 5-1/2 inches by 8 inches allows the incorporation of warehouse processing barcodes.

The following are the data elements that should be included on a commercial shipping label:

" TCN. The Transportation Control Number is a 17 character data element assigned to control and manage every shipment unit throughout the transportation pipeline.

The TCN for each shipment is unique and not duplicated. It is critical for forwarding shipments overseas. Data from the 850. 17 digit 3 of 9 barcode, Human Readable Interpretation [HRI] above or below the barcode; above preferred. If vendor splits the order into 2 or more shipments, position 16 is incremented starting at "A" (excluding "1" and "0" if:

-An order of two or more boxes and the boxes are shipped on different days. - An order is filled from more than one physical location.

" FROM. Agreed name for distribution point, (for example, GSA Hardware Distribution Center, etc), followed by actual address and phone number. GSA logo required on the logo or nearby

" DATE. Julian date shipped.

" RDD. Required Delivery Date. From 850.

" POSTAGE DATA. Optional area for placing permit or mail manifesting data.

" SHIP TO/POE. For domestic customers, this may contain the clear-text address of a consolidated receiving activity, or may be blank. For export orders, the 850 will provide the address of the port or containerization activity, which should be suppressed in the event of mail shipment.

" PIECE or PIECES. Zero-filled 5 digit 3 of 9 barcode of the piece number in the shipment of the particular piece to which this label is attached. HRI of piece number is followed by "OF" and number of pieces in this shipment.

" PROJECT Code. Project Code, as furnished in the 850.

" FMS CASE. Last 3 positions of supplemental address code on 850 when

850 requisition number begins with B, D, P, or T.

" TRANSP PRIORITY, TP, or PRIORITY. Transportation Priority.