Shipping_Tags_IPDs.pdf

PDF 166 KB Posted May 11, 2018

Attached to: Tag, Shipping
Solicitation number: 47QSEA-18-R-0003
Issued by: GSA Federal Acquisition Service

About this file

From the source

Not Listed

View the file

Other files

File	Type	Posted
Shipping_Tags_47QSEA-18-R-0003_Open_Market_BPA.pdf	PDF	May 11, 2018
Shipping_Tags_47QSEA-18-R-0003_Vendor_Portal_and_EDI_Letter.pdf	PDF	May 11, 2018
Shipping_Tags_47QSEA-18-R-0003_Pricing_Quote_Sheet.pdf	PDF	May 11, 2018

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ITEM PURCHASE DESCRIPTION

General Services Administration

Printed on: 8/30/2017, 5:04:06 PM

8135-00-178-9151 UI: HD

TAG, SHIPPING

DESCRIPTION

ITEM NAME TAG, SHIPPING

OVERALL WIDTH 6.250 INCHES (+ /- 0.0625 INCHES)

OVERALL LENGTH 3.125 INCHES (+ /- 0.0625 INCHES)

OVERALL THICKNESS 0.013 INCHES MIN. TO 0.015 INCHES MAX.-TAPPI T-

MINIMUM TIE LENGTH 12.000 INCHES

MINIMUM TIE DIAMETER 0.025 INCHES

EYELET HOLE DIAMETER 0.2187 INCHES (+ /- 0.0313 INCHES)

BASIC SHAPE STYLE A2 RECTANGULAR

FORM SINGULAR FORM

PATCH TYPE METAL EYELET PATCH

EYELET TYPE NON-CORROSIVE METAL

PRINTED TYPE NON-PRINTED

OVERALL COLOR WHITE

TIE MATERIAL TINNED, ANNEALED OR GALVANIZED TAG WIRE

ENVIRONMENTAL PROTECTION WAX PARAFFIN

TWINE TIE CONFORMITY ASTM TEST METHOD D-2256 -

CONFIGURATION A, CONDITION

1, SHALL BE USED TO DETERMINE CONFORMITYOF THE

TWINE TIES TO THE REQUIREMENTS OF THIS CID

BASIS WEIGHT TEST TAPPI T-410

TEARING RESISTANCE TEST (TOTAL OF BOTH DIRECTIONS) TAPPI T-414

WET TENSILE STRENGTH TEST TAPPI T-456

TENSILE TEST METHOD ASTM METHOD E8/E8M

TIE DESIGN THE WIRE, TWINE OR POLYPROPYLENE SHALL BE

FORMED

INTO A LOOP WITH EVEN ENDS, PASSED THROUGH THE

EYELET OF THE TAG, BACK THROUGH THE LOOP, AND

TIGHTENED.

TIE CLOSURE METHOD WIRE TIES ARE TO BE SECURED BY TWISTING AND

SHALL

HAVE ENDS OF EQUAL LENGTH

EYELET HOLE PLACEMENT CENTERED AND NO MORE THAN " FROM THE

TYING END.

COLOR, SHAPE (SQUARE - RECTANGULAR), AND

DIMENSIONS (LENGTH AND WIDTH) OF THE TAGS SHALL BE

AS SPECIFIED.

PRINTING / WRITING QUALITIES LINES OR CHARACTERS SHALL BE DRAWN OR

WRITTEN ON

TESTING METHOD BOTH SIDES OF THE TAG WITH A MEDIUM

POINT "ROLLER

BALL" TYPE PEN.

TEST METHOD SUCCESS NO FEATHERING OF THE INKED LINES OR

CHARACTERS

GENERAL: MATERIALS USED IN THE PRODUCTION OF SHIPPING TAGS SHALL BE MADE

IN ACCORDANCE WITH THE PHYSICAL REQUIREMENTS SPECIFIED BELOW:

COATED STOCKS, WHITE AND COLORED

TEARING

BASIS WEIGHT, RESISTANCE

22-1/2" BY 28-1/2" TOTAL OF BOTH GRADE

THICKNESS - 500 SHEETS DIRECTIONS

DESIGN- MINIMUM MAXIMUM MINIMUM MAXIMUM (MINIMUM)

NATION (INCH) (INCH) (POUNDS) (POUNDS) (GRAMS)

15 CSU .015 .017 150 190 850

THE TAGS SHALL BE STRUNG WITH TIES, AS SPECIFIED IN THE CONTRACT OR ORDER,

CONFORMING TO THE MATERIAL CHARACTERISTICS BELOW:

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

POLYPROPYLENE 1 20

POLISHED COTTON 6 18

SYNTHETIC FIBER 3 25

PACKAGING/PACKING

One hundred (100) tags shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not weigh more than 51 pounds.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

Printed on: 8/22/2017, 5:12:51 PM

8135-00-178-9192 UI: MX

OVERALL WIDTH 3.063 INCHES MIN TO 3.187 INCHES MAX (+ /-0.62

INCH)

OVERALL LENGTH 6.188 INCHES MIN TO 6.312 INCHES MAX (+ /-

0.62 INCH)

OVERALL THICKNESS 0.006 INCH

OVERALL EYELET DIAMETER 0.218 INCH

EYELET LOCATION 0.750 INCHES MAX FROM TYING END

TAG COLOR YELLOW

TAG MATERIAL CLOTH

EYELET MATERIAL METAL

EYELET POSITION CENTERED

FINISHED THREADS 55 X 50 PER INCH THREADS

BASIC SHAPE STYLE RECTANGULAR

UNIT FORM SINGULAR

REINFORCEMENT EYELET WITH PAPER PATCH

TIE INCLUDED

TIE LENGTH 12.000 INCHES MINIMUM

TIE DIAMETER 0.025 INCHES MINIMUM

TIE MATERIAL WIRE

TIE TENSILE STRENGTH 18 LBS MINIMUM

WIRE GAUGE 26 GAUGE

TEAR RESISTANCE TEST 350 GRAMS IN EACH DIRECTON

Materials used in the production of shipping tags shall be made in accordance with the physical requirements specified below:

Finished threads Thickness per inch, not less Tearing resistance Grade Min. Max. than (warp by each direction, designation Inch Inch filling) minimum, grams

No.3 cloth 0.0060 0.0085 55 by 50 350

The following tests shall be used to determine conformity with these requirements: tearing strength shall be determined in accordance with ASTM D-1424; thread count in accordance with ASTM D-3775; and thickness in accordance with ASTM D-1777.

The tags shall be strung with ties, as specified in the contract or order, or 12 inches of twine conforming to the material characteristics specified below:

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

polypropylene 1 20 polished cotton 6 18 synthetic fiber 3 25

ASTM test method D-2256 - configuration A, condition 1, shall be used to determine conformity of the twine ties to the requirements of this CID. The tensile strength of the wire ties shall be tested in acordance with ASTM method E-8.

The wire, twine or polypropylene shall be formed into a loop with even ends, passed through the eyelet of the tag, back through the loop, and tightened. Wire ties are to be secured by twisting and shall have ends of equal length.

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.

The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory requirement (Tags and Tickets): The contractor shall certify that the product offered shall contain a minimum of 50 percent recovered fiber including a minimum of 20 percent postconsumer recovered fiber in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects

Printed on: 8/23/2017, 1:19:59 PM

8135-00-238-6917 UI: MX

OVERALL WIDTH 3.125 INCHES (+ /- 0.062 INCH)

OVERALL LENGTH 6.250 INCHES (+ /- 0.062 INCH)

OVERALL THICKNESS 0.015 INCHES (+ /- 5 PERCENT)

OVERALL HOLE DIAMETER 0.218 INCHES (+ /- 0.031 INCHES)

OVERALL COLOR BUFF

TAG MATERIAL PAPER

TIES MATERIAL POLISHED COTTON, POLYPROPYLENE OR SYNTHETIC

FIBER

SURFACE LUSTER UNCOATED

PRINT TYPE NON-PRINTED

BASIC SHAPE STYLE RECTANGULAR

GRADE DESIGNATION 15 PT MINIMUM

REINFORCEMENT METAL EYELET OPTIONAL

FIBER EYELET PATCH THICKNESS 0.0095 X 2 (BOTH SIDES)

SPECIAL FEATURES SINGULAR FORM; PROVIDES A STURDY MARKING

SURFACE FOR USE IN DOMESTIC SHIPPING AND

TRANSPORTING

INCLUDES TWINE OR POLYPROPYLENE TIE

Materials used in the production of shipping tags shall be made in accordance with the physical requirements specified below:

TEST METHOD

Thickness: - 0.015 in. + /- 5 percent TAPPI T-411

Basis Weight: - 200 lbs + /- 5 percent (24" X 36" - 500 sheets) TAPPI T-

Tearing Resistance - 610 grams minimum (total both directions)

TAPPI T-414

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

polypropylene 1 20 polished cotton 6 18 synthetic fiber 3 25

PACKAGING/PACKING

One thousand (1,000) tags shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not weigh more than 51 pounds.

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

Printed on: 8/30/2017, 5:02:41 PM

8135-00-292-2345 UI: MX

OVERALL WIDTH 2.563 IN. MIN. TO 2.687 IN. MAX. (+ /- 0.052

IN.) - ASTM D1770

OVERALL LENGTH 5.188 IN. MIN. TO 5.312 IN. MAX. (+ /- 0.052

IN.) - ASTM D1770

OVERALL THICKNESS 0.006 IN. MIN. TO 0.008 IN. MAX. - ASTM

D1770

OVERALL HOLE DIAMETER 0.218 IN. (+ /- 0.031 IN.)

FINISHED THREADS PER INCH 55 BY 50 MINIMUM - ASTM D3775

TENSILE STRENGTH ASTM METHOD E-8

TEARING RESISTANCE 350 GRAMS MINIMUM (EACH DIRECTION) - ASTM

D1424

UNIT DESIGN FOR USE IN SHIPPING OR TRANSPORTING GOODS

USAGE FORM SINGULAR FORM

BASIC SHAPE STYLE RECTANGULAR

OVERALL COLOR WHITE

OVERALL MATERIAL CLOTH

PATCH MATERIAL PAPER

EYELET TYPE REINFORCED METAL

HOLE LOCATION CENTERED; NOT MORE THAN 0.75 IN. FROM THE

TYING END

TIE TYPE TIE STRING

TIE MATERIAL POLISHED COTTON, POLYPROPYLENE OR SYNTHETIC

TIE

TWINE TIE CONFORMITY ASTM TEST METHOD D-2256 - CONFIGURATION A,

CONDITION 1, SHALL BE USED TO DETERMINE CONFORMITY

TO THE REQUIREMENTS OF THIS CID

TWINE TYING PROCESS FORMED INTO A LOOP WITH EVEN ENDS, PASSED

THROUGH

THE EYELET OF THE TAG, BACK THROUGH THE LOOP, AND

TIGHTENED

WIRE TYING PROCESS ARE TO BE SECURED BY TWISTING AND SHALL HAVE

ENDS

OF EQUAL LENGTH

PRINTING AND WRITING TEST LINES OR CHARACTERS SHALL BE DRAWN OR

WRITTEN ON

BOTH SIDES OF THE TAG WITH A MEDIUM POINT "ROLLER

BALL" TYPE PEN

SATISFACTORY TEST RESULTS NO FEATHERING OF THE INKED LINES OR

CHARACTERS

THE TAGS SHALL BE STRUNG WITH TIES, AS SPECIFIED IN THE CONTRACT OR ORDER,

OF AT LEAST 12 INCHES OF TINNED, ANNNEALED OR GALVANIZED TAG WIRE NOT

LESS THAN 0.025 INCH IN DIAMETER WITH A MINIMUM TENSILE STRENGTH OF 18

LBS., OR 12 INCHES OF TWINE CONFORMING TO THE MATERIAL CHARACTERISTICS

SPECIFIED BELOW:

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

POLYPROPYLENE 1 20

POLISHED COTTON 6 18

SYNTHETIC FIBER 3 25

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

Printed on: 8/30/2017, 5:00:28 PM

8135-00-292-2351 UI: MX

OVERALL WIDTH 1.875 INCHES (+ /- 0.062 INCH)

OVERALL LENGTH 3.750 INCHES (+ /- 0.062 INCH)

OVERALL THICKNESS 0.015 INCH (+ /- 5 PERCENT) I.A.W. TAPPI T 411

BASIS WEIGHT 150.0 LBS (22.50 INCHES X 28.50 INCHES PER 500

SHEETS)

I.A.W. TAPPI - T 410

UNIT SHAPE A2 RECTANGULAR

USAGE DESIGN DOMESTIC SHIPPING AND TRANSPORTING

OVERALL COLOR BUFF

OVERALL MATERIAL PAPER

ATTACHMENT METHOD TWINE OR POLYPROPYLENE TIE

REINFORCEMENT INCLUDED

REINFORCEMENT TYPE 2 (METAL EYELET NOT REQUIRED)

EYELET MATERIAL PAPER

EYELET HOLE DIAMETER SIZE 0.218 INCH (0.031 INCH)

EYELET HOLE LOCATION CENTERED; NO MORE THAN 0.750 INCH FROM THE

TYING END

EYELET HOLE DESIGN REINFORCED WITH A PAPER PATCH FIRMLY

ATTACHED TO EACH SURFACE AND MAY BE FURTHER

REINFORCED WITH A NONCORROSIVE METAL EYELET,

WHEN SPECIFIED.

TEARING RESISTANCE 850.0 GRAMS IN BOTH DIRECTION I.A.W. TAPPI T 414

WET TENSILE STRENGTH 5.000 KILOGRAMS / 15.00 MM I.A.W. TAPPI T 456

SPECIAL FEATURE SINGULAR FORM

ENVIRONMENTAL PROTECTION TWINE AND MOISTURE RESISTANT AND

WEATHER RESISTANT

The tags shall be strung with ties, as specified in the contract or order, of at least 12 inches of tinned, annealed or galvanized tag wire not less than 0.025 inch in diameter, or 12 inches of twine conforming to the material characteristics below:

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

polypropylene 1 20

ASTM test method D-2256 - configuration A, condition 1, shall be used to determine conformity of the twine ties to the requirements of this purchase description. The tensile strength of the wire ties shall be tested in accordance with ASTM method E-8.

Printing and writing qualities: The tags shall be tested for printing and writing qualities as follows: Lines or characters shall be drawn or written on both sides of the tag with a medium point "roller ball" type pen. To be considered satisfactory there shall be no feathering of the inked lines or characters.

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

www.epa.gov/epawaste/conserve/tools/cpg/index.htm

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

Printed on: 8/23/2017, 1:20:36 PM

8135-00-292-2354 UI: BX

ITEM NAME TAG, SHIPPING (PAPER)

OVERALL WIDTH 2.375 INCHES (+ /- 0.062 INCHES)

OVERALL LENGTH 4.750 INCHES (+ /- 0.062 INCHES)

OVERALL THICKNESS 0.015 INCHES (+ /- 5 PERCENT)

OVERALL HOLE DIAMETER 0.218 INCHES (+ /- 0.031 INCHES)

OVERALL COLOR BUFF

TAG MATERIAL PAPER

TIES MATERIAL POLISHED COTTON, POLYPROPYLENE OR SYNTHETIC

FIBER

SURFACE LUSTER UNCOATED

PRINT TYPE NON-PRINTED

BASIC SHAPE STYLE RECTANGULAR

GRADE DESIGNATION 15 PT MINIMUM

REINFORCEMENT METAL EYELET OPTIONAL

FIBER EYELET PATCH THICKNESS 0.0095 X 2 (BOTH SIDES)

SPECIAL FEATURES SINGULAR FORM; PROVIDES A STURDY MARKING

SURFACE FOR USE IN DOMESTIC SHIPPING AND

TRANSPORTING

INCLUDES TWINE OR POLYPROPYLENE TIE

Materials used in the production of shipping tags shall be made in accordance with the physical requirements specified below:

TEST METHOD

Thickness: - 0.015 in. + /- 5 percent TAPPI T-411

Basis Weight: - 200 lbs + /- 5 percent (24" X 36" - 500 sheets) TAPPI T-

Tearing Resistance: - 610 grams minimum (total both directions)

TAPPI T-414

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

polypropylene 1 20

PACKAGING/PACKING

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

Printed on: 8/22/2017, 5:03:02 PM

8135-00-292-2355 UI: BX

OVERALL WIDTH 2.625 INCHES (+ /- 0.062 INCH)

OVERALL LENGTH 5.250 INCHES (+ /- 0.062 INCH)

OVERALL THICKNESS 0.015 INCHES (+ /- 5 PERCENT)

OVERALL HOLE DIAMETER 0.218 INCHES (+ /- 0.031 INCHES)

OVERALL COLOR BUFF

TAG MATERIAL PAPER

TIES MATERIAL POLISHED COTTON, POLYPROPYLENE OR SYNTHETIC

FIBER

SURFACE LUSTER UNCOATED

PRINT TYPE NON-PRINTED

BASIC SHAPE STYLE RECTANGULAR

GRADE DESIGNATION 15 PT MINIMUM

REINFORCEMENT METAL EYELET OPTIONAL

FIBER EYELET PATCH THICKNESS 0.0095 X 2 (BOTH SIDES)

SPECIAL FEATURES SINGULAR FORM; PROVIDES A STURDY MARKING

SURFACE FOR USE IN DOMESTIC SHIPPING AND

TRANSPORTING

INCLUDES TWINE OR POLYPROPYLENE TIE

UNIT PACKAGING QUANTITY 1000 TAGS PER BOX

Materials used in the production of shipping tags shall be made in accordance with the physical requirements specified below:

TEST METHOD

Thickness: - 0.015 in. + /- 5 percent TAPPI T-411

Basis Weight: - 200 lbs + /- 5 percent (24" X 36" - 500 sheets) TAPPI T-

Tearing Resistance - 610 grams minimum (total both directions)

TAPPI T-414

TENSILE

TWINE TYPE PLY SIZE (MIN.) STRENGTH (LBS. MIN.)

polypropylene 1 20

PACKAGING/PACKING

MARKING

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

8135-00-178-9151 IPD

8135-00-178-9192 IPD

8135-00-238-6917 IPD

8135-00-292-2345 IPD

8135-00-292-2351 IPD

8135-00-292-2354 IPD

8135-00-292-2355 IPD

File details come from the government source that posted it.