7350-00-689-5383-IDP.docx

NOTE TO BUYER:

CAGE: 3A4L4

NOTE: IF IPD DATE OR LAST REVIEW DATE IS OVER 24 MONTHS OLD,

REQUEST TECHNICAL REVIEW BEFORE USING IT IN A SOLICITATION

ITEM PURCHASE DESCRIPTION

NSN: 7350-00-689-5383

TUMBLER, DRINKING (GLASS): Shall be Libbey Glass, P/N 551HT, or equal, with the following characteristics:

12 ounce capacity Height: 5-1/8” to 5-1/4” Top diameter: 2-5/8” to 2-3/4” Bottom diameter: 2-3/8” to 2-1/2” Maximum diameter: 2-3/4” to 2-7/8”

Construction and Materials: The tumblers shall be table glassware for drinking designed without a stem or handle. The tumblers shall be made from soda lime, borosilicate, or other commercial glass and shall be heat-treated to increase resistance to mechanical shock. The tumblers shall be essentially straight-sided with a single bulge. The tumblers shall have a single bulge in the upper half of the body. Pedestal bases shall not be acceptable. The tumblers shall be free of heavy cords, checks, soft blisters and open blisters. The tumblers may have up to five scattered bubbles up to 0.05” in diameter and elongated bubbles up to 0.10” in length. The tumblers shall be straight and true so when rotated about an axis perpendicular to and passing through the center of the base, the top edges shall not show an eccentricity greater than 0.12”. The ware shall not rock more than 0.008” when placed base down on a flat metal surface.

Finish: All surfaces shall be smoothly finished. Edges of tumblers may be either unbeaded or may have beads up to 0.12 inch in thickness.

Workmanship: The tumblers shall be uniformly constructed and free from cracks or chips. The edges shall be well rounded and sufficiently fire polished to remove fins and sharp edges, and free from any defects that would affect serviceability or appearance.

UNIT OF ISSUE: BX (Box of 72 tumblers)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

image1.png