47QMSA18R001__Combined_Synopsi_and_Solicitation_On_Site_M&R_WSMr.docx

PART A

SOLICITATION/CONTRACT FORM

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular

FAC 2005-95 dated 01-13-2017

This acquisition is a 100% Small Business Set-Aside

The provision at 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition, there are no addenda to the provision.

Provision at 52.212-2, Evaluation-Commercial Items, is applicable to this acquisition.

Include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Items, with your offer.

The clause at 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition, there are no addenda to the clause. See pages 20-24

The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition. See pages 24-28 for included clauses.

DUE DATE Offers are due by 3:30 PM CST on November 21, 2017

Offers are to be sent electronically to the following e-mail address:

Joe.Dunne@gsa.gov.

For assistance with submission contact Joe Dunne at (404) 215-6727

Please provide the following information with your submission. Failure to provide ALL of the information below will result in return of your offer

Offeror Name and Address:

Business Name Business Point of Contact Name

Business Address Business POC Phone Number

City State Zip DUNS Number

Page 1 of 117 Combined Synopsis/Solicitation 47QMSA18R001 On Site Maintenance and Repair of GSA Vehicles assigned to WSMR, NM

Page 2 of 117 47QMSA18R001 On Site Maintenance and Repair of GSA Vehicles assigned to WSMR, NM

PART B

SUPPLIES AND SERVICES

SOLICITATION NUMBER: 47QMSA18R001

PSC CLASS: J023

SERVICE: On-site Vehicle Repair, Maintenance, and Overhaul of General Services Administration-Owned Vehicles assigned to White Sands Missile Range, White Sands Stallion Range, White Sands Test Facility and Holloman Air Force Base CONTRACT PERIOD: JANUARY 1, 2018, or date of award, whichever is later, through December 31, 2018 with 2 one year option periods plus an additional 6 months.

SERVICE AREA: White Sands Missile Range and White Sands Test Facility New Mexico GSA will provide a building at each of the service areas. The facilities for each service area are as follows:

White Sands Missile Range

Note: The current number and types of vehicles is not a static listing and is subject to change during the contract period. GSA will provide the successful contractor with updated lists as necessary As noted in item 20, significant changes, a listing in excel spreadsheet format is available via e-mail from the contracting officer at Joe.Dunne@gsa.gov

B-FSS-7FC-161 ESTIMATED WEEKLY REPAIR REQUIREMENTS

The estimated weekly vehicle requirements for repair services:

White Sands Missile Range:

The Contractor may accept additional vehicles exceeding the estimated weekly vehicle requirements, subject to all terms and conditions of the contract. (NOTE: If the Contractor is unable to service vehicles which exceed the “Estimated Weekly Requirements”, the Government reserves the right to take those vehicles that exceed the “Estimated Weekly Requirements”, by individual Group I or Group II categories for repairs to open market vendors, without being in violation of this contract.)

1. OFFER PRICES FOR FIXED PRICE HOURLY LABOR RATE AND FIXED PRICE JOB ITEMS SHALL INCLUDE THE FOLLOWING COSTS ELEMENTS, UNLESS SPECIFICALLY LISTED IN THE BID SCHEDULE.:

(a) Department of Labor (DOL) Wage Determination - Hourly Wage Rates, all Fringe Benefits (Health & Welfare, Vacation, Holiday and Uniforms);

(b) The cost of compliance with all applicable host activity, local, State, and Federal policies, laws, and regulations;

(c) All Federal, State and Local taxes;

(d) Required insurance coverage;

(e) Employee Training;

(f) The cost of miscellaneous, un-measurable items used in the normal operation of a repair facility. Normal miscellaneous, un-measurable items include, but are not limited to: (1) greases and/or lubricants; (2) carburetor and/or fuel injection system cleaners; (3) graphite; (4) silicone; (5) cleaning solvents (to include windshield washer fluid/solvent); and (6) shop towels;

(j) Contractor’s overhead and profit; and

(k) All other costs otherwise stated in the solicitation

2. GUARANTEE:

(a) Notwithstanding inspection and acceptance by the Government or any provisions concerning the conclusiveness thereof, the Contractor guarantees and warrants that all materials furnished and all services performed under this contract will be free from defects in material and workmanship and will conform to the requirements of this contract for a period of ninety (90) days or 4,000 miles, whichever occurs first. The Contractor shall remedy all such defects at his own expense, in a timely manner at Fleet Service Representative’s (FSR) or Contracting Officer Representative’s (COR) discretion, but no later than one (1) workday after notification by the ordering office. Any such work will not be counted as part of the estimated daily requirements.

(b) Should a warranty for new or rebuilt assemblies or subassemblies offered by a manufacturer or re-manufacturer be longer than that stated above, it shall apply for such longer period.

(c) The FSR shall give written notice of any such defect or non-conformance to the Contractor within the applicable warranty period, with a copy to the Contracting Officer. Such notice shall state that either (1) the Contractor shall correct or re-perform any defective or non-conforming materials or services, or (2) the Government does not require correction or re-performance. If the Contractor is required to correct or re-perform, it shall be at no cost to the Government, and any materials or services corrected or re-performed by the Contractor pursuant to this clause, shall be subject to all provisions of this clause to the same extent as work initially performed. If the Government does not require correction or re-performance, the Contracting Officer shall make an equitable adjustment in the contract price.

PART C

DESCRIPTIONS, SOW AND PRICES

ATTENTION ATTENTION ATTENTION ATTENTION

Vendors must submit pricing for all line items.

Line Items 1- 13 are “Direct Repair” services, please provide pricing in the spaces provided for each job and description of services below. Please provide a proposed labor mix for the services in lines 1-13 with your response to include the proposed loaded hourly wage rate. The proposed labor mix must include the labor category description, the number of proposed (or current) employees in that category, the current wages and fringe benefits proposed for that position and the proposed loaded wage rate for each category.

PROPOSED ON SITE JOB DESCRIPTION/STAFFING LEVELS

Offerors are requested to submit a job title, job description and proposed number of employees for each position that will be involved in daily on-site performance of this contract.

Line Items 1- 13 are “Direct Repair” services, please provide pricing in the spaces provided for each job and description of services below. Please provide a proposed labor mix for the services in lines 1-13 with your response. For current contractors responding to this solicitation, the proposed labor mix must include the labor category description, the number of current employees in that category, the name of each employee in that category, the current wages and fringe benefits being paid to that employee and the proposed loaded wage rate for each category. For new offerors, The proposed labor mix must include the labor category description (i.e., Motor Vehicle Mechanic, helper, etc.) for each position, the number of employees proposed for that position and the proposed loaded wage rate.

OFFERORS PROPOSED ON SITE STAFFING

(use additional sheet if necessary

POSITION/TITLE # OF EMPLOYEES HOURLY WAGE RATE PROPOSED LOADED WAGE RATE

LINE ITEM NO. 1 HOURLY LABOR RATE

This hourly labor rate will be used for any repairs that require a motor vehicle mechanic that are not listed in contract line items 2-13 below, and are not excluded from contract coverage. This rate will be the basis of all repairs under Section C, paragraphs 13 and14

Motor Vehicle Mechanic (05190) - Repairs, rebuilds, or overhauls major assemblies of internal combustion automobiles, buses, trucks or tractors. Work involves most of the following: Diagnosing the source of trouble and determining the extent of repairs required; replacing worn or broken parts such as piston rings, bearings, or other engine parts; grinding and adjusting valves; rebuilding carburetors; overhauling transmissions; and repairing fuel injection, lighting, and ignition systems. In general, the work of the Motor Vehicle Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

NOTE: All items include the repair of installed GSA-owned accessory equipment, such as winches, power lift/tail gates, refrigeration (reefer) units, and auxiliary air conditioning units for buses, etc., as required by the GSA representative.

A. GROUP I VEHICLES (Gasoline-powered) Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /HR $ __________________ /HR $ __________________/HR

B. GROUP I VEHICLES (Diesel-powered) Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /HR $ __________________ /HR $ __________________/HR

C. GROUP II VEHICLES (Gasoline-powered)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

D. GROUP II VEHICLES (Diesel-powered)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: The time requirement specified in Clause F-FSS-7FC-163 “Delivery Time”, does apply to this item number

LINE ITEM NO. 2 INSTALL NEW OR USED TIRES

NOTE: Tires will be provided through GSA approved sources. Vendors must contact the MCC in advance for all tire replacements.

TIRE SERVICE AND SUPPLIES TO INSTALL NEW OR USED TIRES.

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

JOB INCLUDES: removing wheel from vehicle; dismounting old tire from wheel and disposal of non-treadable tire; (including any mandatory disposal fees) mounting new tire on wheel; balance Group I and Group II Vehicle wheel; and reinstalling wheel on vehicle.

COMPLETION TIME: Job must be completed no later than one(1) hour after receipt of tire.

GROUP I VEHICLES

A. Passenger and Light Trucks

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

COMPLETION TIME: Job must be completed no later than one(1) hour after receipt of tire.

GROUP II VEHICLES

C. Medium & Heavy Trucks; and Semi-trailers

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than two (2) hours after receipt of tire.

LINE ITEM NO. 3 REPAIR FLAT TIRE

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

TIRE SERVICE AND SUPPLIES TO REPAIR FLAT (PUNCTURE) ON GSA VEHICLE.

JOB INCLUDES: Removing wheel from vehicle; dismounting tire from wheel; repairing puncture (patching only) from inside of tire; remounting repaired tire on wheel; and reinstalling wheel on vehicle. Price includes all supplies required to repair punctures, washing and removal of debris if required.

A. Passenger and Light Trucks

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than one hour, thirty (30) minutes after receipt of vehicle.

GROUP II VEHICLES

C. Medium & Heavy Trucks; and Semi-trailers

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than two hours, thirty (30) minutes after receipt of vehicle.

LINE ITEM NO. 4 REPAIR FLAT TIRE BROUGHT INTO SHOP

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

TIRE SERVICE AND SUPPLIES TO REPAIR FLAT (PUNCTURE) BROUGHT INTO SHOP OFF OF A GSA VEHICLE.

JOB INCLUDES: Dismounting tire from wheel; repairing puncture (patching only) from inside of tire; remounting repaired tire on wheel. Price includes all supplies required to repair punctures, washing and removal of debris if required.

A. Passenger and Light Trucks

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than one hour after receipt of tire and wheel.

JOB INCLUDES: Removing wheel from vehicle; removing/installing wheel weights; balancing wheel as required; and reinstalling wheel onto vehicle. Price to include wheel weights.

GROUP I VEHICLES

A. Passenger and Light Trucks

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than one hour after receipt of vehicle/job.

LINE ITEM NO. 6 ROAD-SIDE SERVICE CALL

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

A) ROAD-SIDE SERVICE CALL WITHIN A 15 (15) ROAD MILE RADIUS OF THE SERVICE FACILITY AT WHITE SANDS MISSILE RANGE INCLUDING UP TO 30 MINUTES LABOR FOR MINOR ROAD-SIDE REPAIR.

MINOR ROAD-SIDE REPAIRS are defined as those which can be performed within 30 minutes or less without special tools or equipment.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

RESPONSE TIME: : Within thirty (30) minutes after notification, the Contractor must be in route to the vehicle location. Charges for “up to 30 minutes labor” begin upon arrival at disabled vehicle.

LINE ITEM NO. 7 QUCIK FIX AND EMERGENCY REPAIRS

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly MINOR EMERGENCY REPAIRS AND QUICK-FIX REPAIRS TO BE PERFORMED AT THE SERVICE FACILITY AT WHITE SANDS MISSILE RANGE 7A: QUICK FIX REPAIRS are defined as those repairs, such as lighting repairs/replacement, flasher replacement, windshield wiper blade repair/replacement, topping off fluid levels; which includes all fluid reservoirs, and any other minor repairs which can be performed within 30 minutes or less without special tools or equipment and are not referenced in the Mitchells 1 On Demand Labor Guide.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

COMPLETION TIME: Must be no later than 30 minutes after receipt of Minor Emergency Repair request.

NOTE: Parts/supplies utilized in the accomplishment of a Minor Emergency Repair request will be billed in accordance with “Supplies Or Services And Prices/Costs”, paragraph 5 entitled, “Method Of Charging For Contractor-Furnished Parts and Materials”.

7B: EMERGENCY REPAIRS are defined as vehicle repairs required after normal workday hours.

This line item must be performed by a qualified motor vehicle mechanic, and should be priced accordingly

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

LINE ITEM NO. 8 PREVENTIVE MAINTENANCE OF GROUP I VEHICLES

This line item must be performed by a qualified motor vehicle mechanic, and should be priced accordingly

NOTE: re-refined oil is approved for use in GSA vehicles. The GSA FSR will supply the vendor with the names of suppliers of re-refined oil

PREVENTIVE MAINTENANCE OF GROUP I VEHICLES.

(Including installed GSA-owned accessory equipment such as winches, power lift/tail gates, etc.) Note: Items that are not GSA owned is the responsibility of the agency in which the vehicle is assigned.

JOB INCLUDES: Oil change; replacement of oil filter; visually inspect brakes while under vehicle, chassis and body lubrication, to include hood/door hinges, locks, and all installed GSA-owned accessory equipment (i.e., lift/tail gates, wheelchair lifts); and other services, including, but not limited to: check all fluid levels (including windshield washer solvent) and correct (“top off”) as necessary; check antifreeze/coolant protection level to -25 degrees, and correct as necessary; inspect and clean air filter (with light air pressure) and replace, if necessary; inspect all belts, hoses, tires, and check tire pressure (adjust if necessary). Inspect lights and replace all inoperative lamps and bulbs, and report any discrepancies found. Check and inspect battery(s), battery cables, battery terminals/posts, and battery terminal/post connections for cracks and/or deterioration, inspect and adjust battery fluid level if necessary, and remove all corrosion from the battery terminals/posts and battery terminal/post connections.

A. Gasoline-powered Vehicles

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

B. Diesel-powered Vehicles Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Scheduled PMs must be completed no later than one (1) hour after receipt of vehicle. For non-scheduled PMs, the job must be completed no later than four (4) hours after receipt of vehicle.

Price includes all labor, oil (up to 6 quarts), oil filter, lubricants, fluids and any and all miscellaneous shop supplies to include, grease, windshield washer solvent, antifreeze/coolant, etc.

NOTE: Air filter (when required), and oil in excess of six (6) quarts, will be billed in accordance with “Supplies Or Services And Prices/Costs”, paragraph 5 entitled, “Method Of Charging For Contractor-Furnished Parts and Materials”.

LINE ITEM NO. 9 PREVENTIVE MAINTENANCE OF GROUP II VEHICLES

This line item must be performed by a qualified motor vehicle mechanic, and should be priced accordingly

NOTE: re-refined oil is approved for use in GSA vehicles. The GSA FSR will supply the vendor with the names of suppliers of re-refined oil

PREVENTIVE MAINTENANCE OF GROUP II VEHICLES.

(Including installed GSA-owned accessory equipment such as winches, power lift/tail gates, refrigeration (“reefer”) units, and auxiliary air conditioning units for buses, etc.) Note: Items that are not GSA owned is the responsibility of the agency in which the vehicle is assigned.

JOB INCLUDES: Oil change; replacement of oil filter(s); replacement of fuel filter(s); fuel/water separator filter(s); coolant filter(s); Inspect and service air cleaner element (with light air pressure) and replacement as necessary, clean inside of filter canister of debris; visual inspection of front and rear brakes, chassis and body lubrication, to include hood/door hinges, locks, and all installed GSA-owned accessory equipment (i.e., wheelchair lifts); power lift/tail gate assembly lubrication (if applicable, checking and addition of transmission and differential oils/grease, as required; and other services, including, but not limited to: check all fluid levels (including windshield washer solvent) and correct (“top off”) as necessary; check antifreeze/coolant protection level to -25 degrees and adjust as necessary; Inspect nitrate levels and the Supplemental Coolant Additives (SCA) of antifreeze with approved methods (Coolant test kits);.inspect all belts, hoses, tires, and check tire pressure (adjust as necessary); inspect lights and replace all inoperative lamps and bulbs, and report any discrepancies found. Check and inspect battery(s), battery cables, battery terminals/posts, and battery terminal/post connections for cracks and/or deterioration, inspect and adjust battery fluid level if necessary, and remove all corrosion from the battery terminals/posts and battery terminal/post connections. ). Fifth wheel operating and locking mechanism lubrication (if applicable).

A. Gasoline-powered Vehicles

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

B. Diesel-powered Vehicles

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

COMPLETION TIME: Job must be completed no later than eight (8) hours after receipt of vehicle/job.

PRICE INCLUDES: All labor, lubricants, fluids (except engine oil) and any and all miscellaneous shop supplies to include, grease, windshield washer solvent, antifreeze/coolant, etc.

NOTE: All filters, parts, and engine oil will be billed in accordance with “Supplies Or Services And Prices/Costs”, paragraph 5 entitled, “Method Of Charging For Contractor-Furnished Parts and Materials”.

LINE ITEM NO. 10 PREVENTIVE MAINTENANCE OF GROUP II VEHICLES (NON-POWERED)

This line item must be performed by a qualified motor vehicle mechanic, and should be priced accordingly

PREVENTIVE MAINTENANCE OF GROUP II VEHICLES (NON-POWERED).

(Including installed GSA-owned accessory equipment such as power lift/tail gates, and refrigeration (“reefer”) units, etc.) Note: Items that are not GSA owned is the responsibility of the agency in which the vehicle is assigned.

NOTE: The time requirement specified in Clause F-FSS-7FC-163 “Delivery Time”, does not apply to this item number. Job must be completed no later than eight (8) hours after receipt of vehicle/job.

JOB INCLUDES: Chassis and body lubrication, to include all hinges, locking devices, and landing gear mechanism; performance of visual inspection of all running gear, to include, but not limited to: trailer glad-hand connections, air lines and reservoirs, suspension (sliding and/or fixed, “Air-Ride” or spring), wheels, hubs and hubometers, oil seals, tires (also, check tire pressure and adjust, as necessary), slack adjusters, and brakes; performance of visual inspection of all body structures, to include, but not limited to: front and side panels, radius panel, roof, roof bows, interior lining (if applicable), “E Track” and/or restraining tie rings (if applicable), scuffband (if applicable), ceiling liner (if applicable), side posts, rear opening door (swing-out or roll-up), side doors (if applicable), door locking mechanism, frame and crossmembers, trailer flooring, landing gear and shoes, trailer connecting king-pin, lighting (interior and exterior) and replace all inoperative lamps and bulbs, bumper, steps and hand rails (if applicable), vent doors (if applicable), and report any discrepancies found.

Semi-Trailers:

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

PRICE INCLUDES: All labor for performance of visual inspections; lubrications; bulb replacements; the necessary oils and/or lubricants for the performance of the vehicle’s preventive maintenance; and, any miscellaneous shop supplied

LINE ITEM NO. 11 BRAKE SYSTEM CHECK

This line item must be performed by a qualified motor vehicle mechanic, and should be priced accordingly

BRAKE SYSTEM CHECK FOR GROUP I VEHICLES:

JOB INCLUDES: (1) Removal of all wheels from vehicle to expose brake drums, brake calipers, brake rotors, backing plates to determine if any brake system maintenance needs to be accomplished; (2) Vehicles with a floating axle, remove wheel seal and wheel bearing to determine if replacement is necessary, and (3) Reassembly of all disassembled parts, and remounting of wheels onto the vehicle A. Passenger Vehicles and Light-duty Trucks

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

B. One-ton Trucks with Floating Axles

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

$__________________ /Job $ __________________ /Job $ __________________/Job

COMPLETION TIME: Job must be completed no later than one (1) hour after receipt of vehicle/job.

NOTE: Price does not include any maintenance, repairs, or replacement of parts determined to be necessary by GSA. When required, any maintenance, repairs, or replacement of parts will be accomplished on the same work order and time already allowed for the inspection will become a part of the flat rate repair time, in accordance with the hourly labor rates. ITEM NUMBER 10 WILL NOT BE CHARGED IN ADDITION TO FLAT RATE TIME FOR BRAKE SERVICE.

LINE ITEM NO. 12 BATTERY CHECK AND CHARGE

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

BATTERY CHECK AND CHARGE:

JOB INCLUDES: (1) Inspect all cables, wiring and belt tension; (2) cleaning of cable terminals; (3) battery charge; and (4) test of vehicle’s charging system.

COMPLETION TIME: Job must be completed no later than two (2) hours after receipt of vehicle/job.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

LINE ITEM NO. 13 BATTERY REPLACEMENT

This line item may be performed by a motor vehicle mechanic helper, and should be priced accordingly

13 A BATTERY REPLACEMENT FOR GROUP I VEHICLES:

JOB INCLUDES: Inspection of all cables, wiring, and belt tension; charge and test of non-responsive battery; installation of new battery; cleaning of cable terminals and battery box; and check of charging system COMPLETION TIME: Job must be completed no later than four (4) hours after receipt of vehicle/job.

NOTE: Battery must have a minimum of 650 Cold Cranking Amps (CCA) with a minimum replacement warranty of sixty (60) months. Battery pricing is not included in this line item. Batteries will be supplied and charged to the Government as a separate line item under parts see paragraph C.3.16

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

13 B BATTERY REPLACEMENT FOR GROUP II VEHICLES

JOB INCLUDES: Inspection of all cables, wiring, and belt tension; charge and test of non-responsive battery; installation of new battery; cleaning of cable terminals and battery box; and check of charging system. Battery pricing is not included in this line item. Batteries will be supplied and charged to the Government as a separate line item under parts see paragraph C.3.16

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

COMPLETION TIME: Job must be completed no later than four (6) hours after receipt of vehicle/job.

LINE ITEM 14 (and its sub-line items) ARE “CONCESSION TYPE” SERVICES AND DO NOT REQUIRE A QUALIFIED MOTOR VEHICLE MECHANIC. MANY OF THE SERVICES ARE SEASONAL (MARSHALLING) AND DO NOT REQUIRE FULL TIME STAFFING. VENDORS ARE REQUIRED TO SUBMIT A PROPOSED LABOR MIX FOR THE FOLLOWING SERVICES:

Please provide a proposed labor mix for the services with your response. The proposed labor mix must include the labor category description, the number employees proposed for that category, the proposed wages and fringe benefits to be paid to that employee and the proposed loaded labor rate for each category. NOTE: Marshalling services requirements are at their peak during the April-June time period and offerors are cautioned to consider appropriate staffing and seasonal adjustments when submitting their proposal. If, due to manufacturers scheduling, a change to peak delivery time is anticipated, GSA will take every measure to inform the contractor so that they may adjust staffing appropriately.

OFFERORS PROPOSED ON SITE STAFFING

POSITION/TITLE # OF EMPLOYEES HOURLY WAGE RATE PROPOSED LOADED WAGE RATE

Marshaling Services Definitions:

Group I Vehicle: includes sedans, station wagons, ambulances, buses, and trucks (including vans) 12,499 pounds Gross Vehicle Weight Rating (GVWR) and under.

Group 2 Vehicle: includes ambulances, buses, and trucks (including “dry freight” and “refrigerated” vans), special-purpose trucks, wreckers, and other special-purpose non-powered equipment, such as semi-trailers, 12,500 pounds Gross Vehicle Weight Rating (GVWR) and over.

Consignee Delivery: Vehicles delivered to other than a dealership Exchange Vehicle: Vehicles turned in to the contractor from a customer agency. Exchange vehicles may be designated for either sale or reassignment Fleet Services Card – GSA Fleet uses a commercial purchase card for fuel, maintenance, and repair services. Each Fleet Services Card is assigned to a specific vehicle and is only to be used for the vehicle identified on the card. The commercial provider of the Fleet Services Card may change over time.

Fleet Services Card Acceptance - In the case of GSA’s current fleet card provider, acceptance can mean the ability to swipe the fleet services card on a point of sale terminal, receive a MasterCard® transaction over the phone, or receive a direct deposit ACH transaction.

FMS2GO – Proprietary software for electronically loading vehicle data (license plates, Fleet Services Card, and vehicle specific information such as vehicle make, model, year, color, tire size, etc.), performing vehicles assignments to customers, terminating customer vehicle assignments, and uploading data to GSA servers.

FMS2GO Mobile App – Government furnished property composed of proprietary software. Android Mobile app software is available for download from Google’s Play Store. Web-based mobile application for use on both phones and hand-held mobile devices.

General Services Administration (GSA) – An executive branch agency of the Federal Government that issued the Request for Proposal and oversees any contracts or task orders awarded under the Request for Proposal.

GSA Accountability Form – is a GSA created form (may be paper or electronic) that allows for the quick and easy capture of necessary vehicle identifying information as well as interior/exterior condition elements when a vehicle is received at the contractor’s facility and/or if transported to or from another location.

FMC: Fleet Management Center FSR: Fleet Service Representative – an employee of GSA assigned to the Fleet Management Center.

General Services Administration (GSA) – An executive branch agency of the Federal Government that issued the Request for Proposal and oversees any contracts or task orders awarded under the Request for Proposal.

GSA Accountability Form – is a GSA created form (may be paper or electronic) that allows for the quick and easy capture of necessary vehicle identifying information as well as interior/exterior condition elements when a vehicle is received at the contractor’s facility and/or if transported to or from another location.

National Accident Management Center (AMC) – The GSA AMC is responsible for oversight and authorization of glass repair/replacement, vehicle crash and other incident damage repairs prior to a vehicle being placed is sale status.

National Maintenance Control Center (MCC) – The GSA MCC is responsible for oversight and authorization of the vehicle maintenance and repair for GSA Fleet vehicles prior to a vehicle being placed in sale status.

New Vehicles: Vehicles received by or at GSA consignee delivery points that have not previously been assigned to any customer. The contractor may have to arrange for pick up at the consignee delivery points Pre-assignment preparation: Preparing either new or reassignment vehicles for pick up by the GSA customer.

PDI: Pre Delivery Inspection, performed to manufacturers specification Reassignment Vehicles: Vehicles that have been turned in to GSA from a customer for subsequent reassignment to a different GSA customer. These vehicles will be turned in at the contractors location Upfitter: Vendor that provides post manufacturing equipment installation Sale Vehicles: Vehicles that are turned in to GSA for disposal under the national auction contract. These vehicles will be received at the contractors location for inspection prior to being picked up by the auction facility.

Vehicle Fleet Exchange (VFE) – Government web-based application utilized by GSA Fleet Customer(s) to schedule appointments to exchange GSA Fleet leased vehicles.

Line Item 14 Marshalling Services

.GSA will provide each site with FMS2GO equipment so that vehicle information can be recorded. Each site MUST utilize this equipment while recording vehicle data. There will be no exceptions to this requirement.

CLIN 14 a. New vehicle receipt and inspection This service includes receiving vehicles directly from manufacturer or upfitter (consignee delivery) or if directed by GSA receiving the vehicles from a local dealership, preparing the new vehicle for assignment by attaching license plate tags and any specialty equipment as directed by the GSA FSR (equipment provided by GSA), conducting a pre-release inspection of the new vehicle with each GSA customer, delivering the GSA Fleet Credit Card and Vehicle Packet for each new vehicle (provided by GSA) to the customer, releasing the new vehicle to the GSA customer, and preparing necessary documentation to forward to GSA FSR’s (provided by GSA) The following tasks for the above line item shall be completed by the contractor:

Upon delivery of vehicles to vendor location by dealership or upon pickup of vehicle from dealership (if necessary) the contractor will notify GSA that the vehicles have been received. If vehicles will be retrieved from a dealership, the vendor will have 1 (one) business day after notification that vehicle is a dealership to retrieve the vehicle (s)

The contractor must conduct a walk around visual inspection of vehicle to ensure vehicle matches description on transport/lading documents, note any damages to the vehicles, or discrepancies from descriptions order sheet.

1. ) Remove the window stickers and vehicle information sheets from the vehicle and set them aside for the GSA FSR. Remove any decals and protective plastic coverings. Install antennae, hubcaps, license plate brackets and accessory fuses as necessary.) Scan each license plate and install the GSA provided license plates (“A” plate on front and “B” plate on rear) on each vehicle. Load all vehicle information utilizing FMS2GO equipment (provided by GSA)

2. ) Ensure that the vehicle has adequate fuel to be driven to the nearest fueling facility that accepts the GSA Fleet Services Credit Card. GSA will provide the vendor with a list of nearby stations that accept the Fleet Services Credit Card.

3. NOTE: Paragraphs 1-4 must be completed within 3 working days after receipt/retrieval of new vehicles from the dealership

4. ) Upon completion of steps 1, 2, and 3, contact the GSA FSR (or the customer if directed by GSA) to inform GSA (or the customer) that the new vehicle is ready for assignment and to schedule a pick up date with the customer. If GSA contacts the customer, the FSR will notify the contractor of the scheduled pick up date. Contractor is required to utilize VFE to schedule all customer appointments.

5. ) On the date scheduled for pick up, the contractor shall pressure wash the exterior of the new vehicle prior to releasing the vehicle to the customer.

6. ) During the scheduled pick up, the contractor shall then conduct a walk around inspection of the vehicle to be assigned with the customer agency’s representative. If any discrepancies are noted by the customer agency representative the contractor shall note the discrepancies on the vehicle accountability form and must contact the GSA FSR immediately for assistance in resolving the issue. Do not release any vehicle that has been identified as having a discrepancy by the customer agency until approved to do so by GSA FSR.

7. ) If there are no discrepancies noted during the walk around inspections, or once any issues have been resolved, the contractor shall hand over the new vehicle packet containing the GSA Fleet credit card to the customer agency representative, obtain their signature on the vehicle accountability form (provided by GSA) , and release the vehicle. The contractor shall provide the original copy of the signed vehicle accountability form GSA FSR.

NOTE: Vehicles retrieved from a dealership do not require that a PDI be performed.

CLIN 14 a (1). Pricing for vehicles which require do not require pickup from a dealership Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 a (2). Pricing for vehicles which require pickup from a dealership Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 a (3). Pricing for vehicles direct delivered from manufacturer or upfitter (requires PDI to be performed)

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 b. Turn in of used vehicles for disposal This service includes receiving a vehicle from the customer agency, inspecting the vehicle for damage and securing the fleet credit card, and securing the vehicle until transportation to sale facility.

NOTE: THESE SERVICES MAY BE PERFORMED AT THE SAME TIME AS SCHEDULED PICK UP IN LINE 1 ABOVE.

1. The contractor must complete a “walk around” inspection with the customer agency representative the contractor must note any damages or non-functioning items such as body damage, apparent mechanical defects, broken gauges, radio, check engine light, etc., on the vehicle accountability form (supplied by GSA). Ensure that the vehicle has a spare tire, and tire changing equipment with it. Any damage, and/or discrepancies shall be noted on the vehicle accountability form. The agency representative should sign the form, and the vendor shall hold the form for the GSA FSR. The accountability sheet shall be delivered to the GSA FSR the same date the vehicle is turned in.

2. The contractor must ensure that the fleet card is secured at all times while in the contractor’s possession. Any unauthorized use or charges accruing on the card while it is in the contractor’s possession are the responsibility of the contractor.

NOTE: Unless specifically authorized in advance by the GSA FSR, on vehicles identified by GSA as scheduled for disposal (sale) no further service are to be performed. GSA will arrange for transportation to the sale facility. The vehicles remain the contractors responsibility until such time as they are picked up for transportation to the sale facility. At the time of pickup the contractor shall receive a copy of the transportation condition report from the transportation company. The contractor must retain this report for delivery to the GSA FSR. For vehicles that are to be reassigned, see line item 14c below.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 c . Turn in of used vehicles for reassignment to another customer

This service includes receiving the vehicle from the customer agency, inspecting the vehicle for damage, ensuring that the vehicle has two matching license plates, and securing the fleet credit card for the vehicle, transporting the vehicle for repairs (if necessary) and cleaning or detailing the vehicle as ordered by GSA and assigning the vehicle to the customer

1. The contractor must complete a “walk around” inspection with the customer agency representative the contractor must note any damages or non-functioning items such as body damage, apparent mechanical defects, broken gauges, radio, check engine light, etc., on the vehicle accountability form (supplied by GSA). Ensure that the vehicle has a spare tire, and tire changing equipment with it. Any damage, and/or discrepancies shall be noted on the vehicle accountability form. The agency representative should sign the form. If the agency representative will not sign the form, contact the GSA FSR immediately for assistance.

2. Ensure that the vehicle has two matching license plates and that the fleet credit card has been turned in with the vehicle. If any tag discrepancies are noted or if the fleet card is not supplied, it must be reported to the FMC immediately. The contractor must ensure that the fleet card is secured at all times while in the contractor’s possession. Any unauthorized use or charges accruing on the card while it is in the contractor’s possession are the responsibility of the contractor.

3. The GSA FSR will review the exchange vehicle accountability form prepared by the contractor and advise the contractor of any repairs to be made to the reassignment vehicle. It is not necessary that the contractor have on-site facilities to accomplish mechanical and/or body repairs.

4. If the contractor does not have the on-site capability to accomplish the repairs as directed by GSA, the GSA FSR will direct the contractor to transport vehicle to the nearest GSA approved repair facility.. Unless specifically authorized by this contract, the contractor is prohibited from driving or moving any GSA vehicle without the express authorization of the GSA FSR.

5. The contractor will be responsible for any transportation of the vehicle to and from such facility. Any costs for such transportation will be submitted on a round trip basis. Transportation pricing shall be provided on a per trip basis and supplied in line item 5 below

6. If the contractor does have on-site facilities for mechanical and/or body repairs, they must be listed as a GSA approved source for those services. DO NOT PERFORM ANY REPAIRS UNLESS AUTHORIZED IN ADVANCE BY THE GSA FSR. Failure to secure advance authorization will result in non-payment of unauthorized repairs. If the contractor is not a GSA approved source, please contact the GSA Fleet Management Center for assistance

7. Upon completion of any work ordered by the GSA FSR the contractor shall notify the GSA FSR (or the customer if directed by GSA) that the work has been completed and that the vehicle is ready for reassignment. Each vehicle must have adequate fuel when it is reassigned. If GSA contacts the customer, the FSR will notify the contractor of the scheduled pick up date. As in Contract Line Item 1, the customer may be turning in a used vehicle for re-assignment or disposal.

8. On the date scheduled for pick up, pressure wash the exterior of the vehicle. The contractor shall then conduct a walk around inspection of the vehicle to be assigned with the customer agency’s representative. If any discrepancies are noted by the customer agency representative the contractor must contact the GSA FSR immediately for assistance in resolving the issue.

9. If there are no discrepancies noted during the walk around inspections, or once any issues have been resolved, the contractor shall hand over the new vehicle packet containing the GSA Fleet credit card to the customer agency representative, obtain their signature on vehicle accountability form, and release the vehicle. The contractor shall provide the original copy of the vehicle accountability form to the GSA FSR.

CLIN 14 c. Pricing

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

IF ORDERED BY THE FSR, THE CONTRACTOR SHALL PERFORM THE FOLLOWING TASKS AS ADDITIONAL PRE-DELIVERY PREPARATION PRIOR TO ASSIGNING THE VEHICLE.

Note: It is not necessary that the vendor have on-site capabilities to perform the cleaning/detailing services. Transportation to and from a carwash/detail shop will be allowed as in item. The GSA FSR will provide the name of an approved facility CLIN 14 d. Level I Cleaning: Level I cleaning includes the following items:

Exterior: Wash exterior, including glass, door jambs, tires, and wheel rims/covers; and inflate tires to recommended pressure.

Driver and passenger compartment. (i) Remove debris; (ii) vacuum floors and seats; (iii) clean dashboard, instrument panel, armrests, door panels, and rear shelf; (iv) remove Government stickers or decals without marring surface; (v) clean ashtrays and glove compartment; and (vi) wash windows.

Trunk. (i) Remove debris; (ii) vacuum; and (iii) position spare tire and tools.

Base Year Option 1 Option 2 (1/01/2018-12/31/2018) (1/1/2019-12/31/2019) (1/01/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 e. Level II Cleaning: includes all work under14d, level I cleaning, and the following additional steps.

(1) Driver and passenger compartment. (i) Shampoo seats, dashboard, headliner, door panels, and floor covering; (ii) spray-dye floor carpets and mats; (iii) polish where appropriate; (iv) apply vinyl/rubber reconditioners where appropriate.

(2) Trunk. (i) Wash interior surface; and (ii) Spray-dye mats.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicles $_______________ $_______________ $_____________

Group 2 Vehicles $_______________ $________________ $_____________

CLIN 14 f Level III Cleaning. Level III cleaning includes all steps in 14 d (level 1 cleaning) and 14 e (level II cleaning) above and the following additional work.

(1) Exterior: Wax and polish

(2) Engine compartment. (i) Clean major surface areas (air cleaner cover, battery, etc.); (ii) wash or steam clean, when necessary; (iii) additionally apply rubber conditioner or black tire paint to all tires; (iv) wash and blacken wheel splash shields; (v) apply touch-up paint to nicks and scratches.

CLIN 14 g . Transportation of vehicles for repair or cleaning.

This service includes moving the vehicle from the vendor’s facility to an approved GSA source for repair or cleaning only. These service will be ordered as necessary by the GSA FSR. The vendor must ensure that any driver transporting these vehicles has the appropriate valid drivers license for the state and type of vehicle to be moved.

NOTE: All transportation will be authorized at the time the repair or cleaning services are ordered. Transportation that is not authorized in advance will not be approved.

Base Year 1st Option Year 2nd Option Year (1/1/2018- 12/31/2018) (1/1/2019-12/31/2019) (1/1/2020-12/31/2020)

Group 1 Vehicle $_______________/per mile $_______________/per mile $_______________/ per mile

Group 2 Vehicle $_______________/per mile $_______________/per mile $_______________/per mile

LINE ITEM NO. 15 SHUTTLE SERVICES.

Line item 15 requires the use of drivers. Please see the attached Wage Determination for relevant categories. These services will be performed only upon approval of the assigned Fleet Manager or Fleet Service Representative Shuttle services are defined as: Driving or otherwise moving vehicles that require warranty work or offsite repairs from the on-site maintenance and repair facility to the warranty repair site and back to the…