[Submitted 3.27.19] Bound Updated Irrign Dwgs 95% 032719.pdf
PDF 4 MB Posted
- Attached to
- Oakland Federal Building Landscaping
- Solicitation number
- 47PK1220Q0001
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JEFFERSON STREET
CLAY STREET
T
H
S
T R
E E
T
T
H
S
T R
E E
T
NORTH TOWERSOUTH TOWER
General Services Administration PBS, Design and Construction Division 50 United Nations Plaza, 3rd Floor San Francisco, CA 94102
SENSITIVE BUT UNCLASSIFIED (SBU)
PROPERTY OF
THE UNITED STATES GOVERNMENT
FOR OFFICIAL USE ONLY
Do not remove this notice Properly destroy or return documents when no longer needed
AutoCAD SHX Text
SS
AutoCAD SHX Text IRRIGATION CONTROLLER 'C' - INSTALL SiteOne GREEN TECH CONTROLLER ASSEMBLY IN PLACE OF EXISTING CONTROLLER AS DETAILED AND AS SPECIFIED IN IRRIGATION LEGEND. CONTACT JIM WELLER, SiteOne GREEN TECH REPRESENTATIVE, FOR ORDER, PURCHASE, AND WARRANTY. (925.451.1610) SERVICE WITH EXISTING 120 VOLT A.C. ELECTRICAL.
AutoCAD SHX Text C
AutoCAD SHX Text
SUB-SURFACE DRIP IRRIGATION BOUNDARY. SEE DETAILS. (TYPICAL)
AutoCAD SHX Text ACTUAL LOCATIONS AND QUANTITIES OF FLUSH VALVES AND AIR/VACUUM RELIEF VALVES SHALL BE FIELD DETERMINED BASED ON SUB-SURFACE IRRIGATION EQUIPMENT MANUFACTURER'S RECOMMENDATION. (TYPICAL)
AutoCAD SHX Text E
AutoCAD SHX Text
EXISTING 1" COPPER LATERAL PIPE.
AutoCAD SHX Text
EXISTING 1 " COPPER 12" COPPER LATERAL PIPE.
AutoCAD SHX Text
EXISTING REMOTE CONTROL VALVE SERVICES EXISTING AND NEW STREET TREES.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text
EXISTING MAINLINE. (TYPICAL)
AutoCAD SHX Text
CONNECT NEW TREE BUBBLERS TO EXISTING TREE BUBBLER LATERAL LINE. (TYPICAL)
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text
EXISTING COPPER FROM PLANTER TO PLANTER.
AutoCAD SHX Text E
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVES WITH NEW REMOTE CONTROL VALVES FOR DRIPLINE CIRCUITS.
AutoCAD SHX Text
EXISTING REMOTE CONTROL VALVE SERVICES EXISTING AND NEW STREET TREES.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text CONNECT NEW IRRIGATION LATERAL LINE TO EXISTING IRRIGATION LATERAL LINE. (TYPICAL)
AutoCAD SHX Text CONNECT NEW IRRIGATION LATERAL LINE TO EXISTING IRRIGATION LATERAL LINE. (TYPICAL)
AutoCAD SHX Text
EXISTING COPPER TO REMAIN IN SERVICE.
AutoCAD SHX Text E
AutoCAD SHX Text
EXISTING REMOTE CONTROL VALVE SERVICES EXISTING AND NEW STREET TREES.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text
EXISTING IRRIGATION SLEEVE.
AutoCAD SHX Text
EXISTING IRRIGATION SLEEVE.
AutoCAD SHX Text
EXISTING COPPER FROM PLANTER TO PLANTER.
AutoCAD SHX Text E
AutoCAD SHX Text
EXISTING REMOTE CONTROL VALVE SERVICES EXISTING AND NEW STREET TREES.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVE WITH NEW REMOTE CONTROL VALVE FOR DRIPLINE CIRCUIT.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVES WITH NEW REMOTE CONTROL VALVES FOR DRIPLINE CIRCUITS.
AutoCAD SHX Text
EXISTING 1" COPPER LATERAL PIPE.
AutoCAD SHX Text
EXISTING IRRIGATION SLEEVE.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVES WITH NEW REMOTE CONTROL VALVES FOR DRIPLINE CIRCUITS AND EXISTING SPRAY TO REMAIN.
AutoCAD SHX Text
CONNECT NEW TREE BUBBLERS TO EXISTING TREE BUBBLER LATERAL LINE. (TYPICAL)
AutoCAD SHX Text
EXISTING TREE BUBBLER LATERAL LINE. (TYPICAL)
AutoCAD SHX Text
EXISTING TREE BUBBLER LATERAL LINE. (TYPICAL)
AutoCAD SHX Text
AutoCAD SHX Text C-6
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-5
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SM
AutoCAD SHX Text
AutoCAD SHX Text C-4
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-3
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-2
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SM
AutoCAD SHX Text
AutoCAD SHX Text C-1
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-17
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-15
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-16
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-8
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
EX
AutoCAD SHX Text C-9
AutoCAD SHX Text
AutoCAD SHX Text C-10
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SM
AutoCAD SHX Text
AutoCAD SHX Text C-11
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
EX
AutoCAD SHX Text C-12
AutoCAD SHX Text
AutoCAD SHX Text C-13
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SM
AutoCAD SHX Text
AutoCAD SHX Text C-14
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text
AutoCAD SHX Text C-7
AutoCAD SHX Text 1.51
AutoCAD SHX Text
SL
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text EXTERIOR MOUNT WIRELESS SOLAR SENSOR. SENSOR MUST BE LOCATED AT TOP EDGE OF BUILDING WHERE IT WILL RECEIVE UNOBSTRUCTED RAINFALL AND UNOBSTRUCTED SOLAR RADIATION. FIELD DETERMINE THE BEST LOCATION FOR THE BEST POSSIBLE PERFORMANCE.
AutoCAD SHX Text REPLACE EXISTING REMOTE CONTROL VALVES WITH NEW REMOTE CONTROL VALVES FOR DRIPLINE CIRCUITS AND EXISTING SPRAY TO REMAIN.
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2-4" SL.
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
2" SL.
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text
2" SL.
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
EXISTING IRRIGATION SLEEVE.
AutoCAD SHX Text
EXISTING IRRIGATION SLEEVE.
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text 3"
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
DATE DRAFTED:
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text Planners
AutoCAD SHX Text Architects
AutoCAD SHX Text Engineers
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
1500 PARK AVENUE, STE 129 EMERYVILLE, CA 94608
AutoCAD SHX Text
GS-09P-15-KT-D-0008
AutoCAD SHX Text
GS-P-09-16-KT-7066
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
RONALD V. DELLUMS FEDERAL BUILDING
AutoCAD SHX Text
1301 CLAY STREET
AutoCAD SHX Text
OAKLAND
AutoCAD SHX Text
CA
AutoCAD SHX Text 94612
AutoCAD SHX Text
CA 0281ZZ
AutoCAD SHX Text
REPLACEMENT OF LANDSCAPING AND
AutoCAD SHX Text
IRRIGATION SYSTEMS
AutoCAD SHX Text
LANDSCAPING IMPROVEMENT PROJECT
AutoCAD SHX Text
FOR GROUND AND 5TH FLOORS
AutoCAD SHX Text
JASON GUERRERO
AutoCAD SHX Text
95% CONSTRUCTION DOCUMENT SUBMITTAL
AutoCAD SHX Text
MARCH 20, 2019
AutoCAD SHX Text
ACC
AutoCAD SHX Text 03/20/2019
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
95% CD SUBMITTAL MAR 20, 2019
AutoCAD SHX Text
OF
AutoCAD SHX Text
EXISTING IRRIGATION VALVES
AutoCAD SHX Text
AutoCAD SHX Text L
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PRELIMINARY IRRIGATION PLAN
AutoCAD SHX Text 1"=20'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text L103
AutoCAD SHX Text
AutoCAD SHX Text
NORTH
AutoCAD SHX Text 20'
AutoCAD SHX Text 10'
AutoCAD SHX Text 0'
AutoCAD SHX Text 20'
AutoCAD SHX Text 40'
AutoCAD SHX Text
GRAPHIC SCALE: 1" = 20'
AutoCAD SHX Text
/A/JOB/
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SYMBOL SIZE:
AutoCAD SHX Text
AutoCAD SHX Text
DELLUMS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1830L103
AutoCAD SHX Text L103
AutoCAD SHX Text
AutoCAD SHX Text 03-22-2019
AutoCAD SHX Text
CK
AutoCAD SHX Text L A N D S C A P E I R R I G A T I O N
AutoCAD SHX Text
DICKSON & ASSOCIATES, INC.
AutoCAD SHX Text
MARTY DICKSON, ASIC-PIC
AutoCAD SHX Text TEL(530) 547-5515 www.dicksoninc.net
AutoCAD SHX Text
P.O. BOX 415
AutoCAD SHX Text
PALO CEDRO, CALIFORNIA 96073
AutoCAD SHX Text c Dickson & Associates, Inc.
AutoCAD SHX Text COMMISSIONING AND MANAGEMENT OF SUB-SURFACE DRIP IRRIGATION SYSTEMS 1. PRIOR TO PLANTING, CONTRACTOR SHALL PREPARE SOIL FOR PLANTING BY HAND WATERING TO BRING SOIL MOISTURE CONTENT UP TO AN IDEAL GROWING CONDITION THROUGHOUT THE INTENDED ROOT ZONE. OPERATE SUB-SURFACE DRIP SYSTEM AS NECESSARY TO MAINTAIN MOISTURE LEVEL IN SOIL. DO NOT LET SOIL DRY OUT. MOISTURE DEPLETION SHOULD NOT EXCEED 20% DEPLETION (80% OF DESIRED MOISTURE CONTENT REMAINS). CONTRACTOR SHALL MONITOR MOISTURE CONTENT TO ENSURE DESIRED MOISTURE CONTENT IS MAINTAINED WITHOUT OVER-SATURATION. USE CARE TO NOT DAMAGE SUB-SURFACE DRIP TUBING WHEN PROBING SOIL FOR MOISTURE CONTENT TESTING. 2. INSTALL TUBING ACCORDING TO SPACING SPECIFIED IN THE DRAWINGS AND DETAILS. DRIP TUBING MUST REMAIN AS CLOSE AS POSSIBLE TO THE SPACING IDENTIFIED IN THE DRAWINGS. THE GRID OF EMITTERS ARE INTENDED TO IRRIGATE THE ENTIRE PLANTED AREA (NOT INDIVIDUAL PLANTS). LIKEWISE, DO NOT MOVE PLANTS FROM THEIR DESIGNED SPACING TO BE CLOSER TO AN EMITTER. WHEN PROPERLY MANAGED, THE DRIP SYSTEM WILL PROVIDE WATER TO THE ENTIRE PLANTED AREA, CREATING AN INVITING CONDITION FOR THE ROOTS TO GROW AND THE PLANTS TO THRIVE.
AutoCAD SHX Text NOTES: 1. USE EXISTING CONTROL WIRE TO CONNECT REMOTE CONTROL VALVES TO CONTROLLER. 2. EXISTING IRRIGATION COMPONENTS, REMOTE CONTROL VALVES, PIPE, SLEEVES, ETC. SHOWN IN THIS DRAWING ARE BASED ON ORIGINAL DESIGN DRAWINGS AND SOME SITE INVESTIGATION BY OTHERS. ACTUAL LOCATIONS MAY VARY AND MUST BE VERIFIED BY THE CONTRACTOR. WHERE CONDITIONS ARE FOUND TO DIFFER FROM AS DEPICTED IN THE DRAWINGS, CONTRACTOR SHALL NOTIFY THE DESIGN TEAM FOR POSSIBLE REVISIONS. 3. THIS IRRIGATION SYSTEM INTERFACES WITH AN EXISTING IRRIGATION SYSTEM WHICH IS TO REMAIN IN SERVICE. THE EXISTING UNDERGROUND IRRIGATION EQUIPMENT AND OTHER UTILITIES HAVE NOT BEEN FIELD VERIFIED UNDER THE CONSTRUCTION DOCUMENT PHASE OF WORK. THE CONTRACTOR SHALL FIELD VERIFY THE LOCATION OF EXISTING IRRIGATION MAINLINE PIPING, LATERAL LINE PIPING, LOW VOLTAGE AND HIGH VOLTAGE WIRE, AND VALVES BEFORE CONSTRUCTION IS STARTED. DAMAGE TO THE EXISTING IRRIGATION SYSTEM AND OTHER VARIOUS UTILITIES SHALL BE REPAIRED BY THE CONTRACTOR AT NO ADDITIONAL EXPENSE TO THE OWNER. THE CONTRACTOR IS RESPONSIBLE FOR MAINTAINING THE CURRENT OPERATION OF THE EXISTING IRRIGATION SYSTEM WHICH SERVICES AREAS OUTSIDE OF THE CONTRACT WORK AREA. DO NOT SHUT DOWN GATE VALVES, SEVER MAIN OR LATERAL PIPING, AND/OR SEVER WIRE WHICH ORIGINATES IN OR TRAVELS THROUGH THIS CONTRACT WORK AREA UNLESS SPECIFICALLY DIRECTED TO DO SO BY THE CONTRACT DOCUMENTS OR BY WRITTEN APPROVAL FROM THE ARCHITECT. VALVE WIRING BETWEEN CONTROLLER AND EXISTING REMOTE CONTROL VALVES SHALL BE RESTORED WHERE DAMAGED DURING DEMOLITION. LANDSCAPE STRESS OUTSIDE OF THIS CONTRACT AREA WILL REQUIRE FULL REPLACEMENT OF THE LANDSCAPE DAMAGED UNDER THIS CONTRACT WORK AT NO ADDITIONAL EXPENSE TO THE OWNER. 4. EXISTING IRRIGATION SHALL REMAIN IN SERVICE IN PLANTED SPACES NOT SHOWING NEW IRRIGATION. ASSESS AND REPAIR TO ACHIEVE FULL FUNCTIONALITY. (TYPICAL)
AutoCAD SHX Text L
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text D
AutoCAD SHX Text U
AutoCAD SHX Text O
AutoCAD SHX Text Y
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text L
AutoCAD SHX Text A
AutoCAD SHX Text C
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text L
AutoCAD SHX Text A
AutoCAD SHX Text E
AutoCAD SHX Text C
AutoCAD SHX Text I
AutoCAD SHX Text V
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text D
AutoCAD SHX Text N
AutoCAD SHX Text U
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text N
AutoCAD SHX Text U
AutoCAD SHX Text
CALL 811 811811
General Services Administration PBS, Design and Construction Division 50 United Nations Plaza, 3rd Floor San Francisco, CA 94102
SENSITIVE BUT UNCLASSIFIED (SBU)
PROPERTY OF
THE UNITED STATES GOVERNMENT
FOR OFFICIAL USE ONLY
Do not remove this notice Properly destroy or return documents when no longer needed
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
DATE DRAFTED:
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text Planners
AutoCAD SHX Text Architects
AutoCAD SHX Text Engineers
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
1500 PARK AVENUE, STE 129 EMERYVILLE, CA 94608
AutoCAD SHX Text
GS-09P-15-KT-D-0008
AutoCAD SHX Text
GS-P-09-16-KT-7066
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
RONALD V. DELLUMS FEDERAL BUILDING
AutoCAD SHX Text
1301 CLAY STREET
AutoCAD SHX Text
OAKLAND
AutoCAD SHX Text
CA
AutoCAD SHX Text 94612
AutoCAD SHX Text
CA 0281ZZ
AutoCAD SHX Text
REPLACEMENT OF LANDSCAPING AND
AutoCAD SHX Text
IRRIGATION SYSTEMS
AutoCAD SHX Text
LANDSCAPING IMPROVEMENT PROJECT
AutoCAD SHX Text
FOR GROUND AND 5TH FLOORS
AutoCAD SHX Text
JASON GUERRERO
AutoCAD SHX Text
95% CONSTRUCTION DOCUMENT SUBMITTAL
AutoCAD SHX Text
MARCH 20, 2019
AutoCAD SHX Text
ACC
AutoCAD SHX Text 03/20/2019
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
95% CD SUBMITTAL MAR 20, 2019
AutoCAD SHX Text
OF
AutoCAD SHX Text
IRRIGATION LEGEND & NOTES
AutoCAD SHX Text
AutoCAD SHX Text L
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
/A/JOB/
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SYMBOL SIZE:
AutoCAD SHX Text
AutoCAD SHX Text
DELLUMS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1830L103
AutoCAD SHX Text L104
AutoCAD SHX Text
NONE
AutoCAD SHX Text 03-22-2019
AutoCAD SHX Text
CK
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
IRRIGATION LEGEND
AutoCAD SHX Text
MODEL NUMBER
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
1120-SCHEDULE 40 PVC PLASTIC PIPE. 18" COVER. 24" COVER UNDER VEHICULAR PAVING.
AutoCAD SHX Text 1120-SCHEDULE 40 PVC PLASTIC PIPE WITH SCHEDULE 40 PVC SOLVENT-WELD FITTINGS. 12" COVER. 24" COVER UNDER VEHICULAR PAVING.
AutoCAD SHX Text
SLEEVING:
AutoCAD SHX Text
LATERAL LINE:
AutoCAD SHX Text 1120-SCHEDULE 40 PVC PLASTIC PIPE WITH SCHEDULE 40 PVC SOLVENT-WELD FITTINGS. 18" COVER. 24" COVER UNDER VEHICULAR PAVING.
AutoCAD SHX Text
MAINLINE:
AutoCAD SHX Text
RAIN BIRD BUBBLER (SHRUB)
AutoCAD SHX Text
AutoCAD SHX Text
RAIN BIRD BUBBLER (TREE)
AutoCAD SHX Text
AutoCAD SHX Text
RAIN BIRD BUBBLER WITH DEEP WATERING BUBBLER ASSEMBLY AND CHECK VALVE (TREE)
AutoCAD SHX Text
RWS-B-C-1401
AutoCAD SHX Text
RAIN BIRD REMOTE CONTROL VALVE
AutoCAD SHX Text
PESB-SERIES
AutoCAD SHX Text RAIN BIRD CONTROL ZONE KIT - PVC BALL VALVE, 1" PESB VALVE AND 1" PRESSURE REGULATING (40 PSI) QUICK CHECK BASKET FILTER (200 MESH)
AutoCAD SHX Text
RAIN BIRD QUICK COUPLING VALVE
AutoCAD SHX Text
33DRC
AutoCAD SHX Text
T-113-LF
AutoCAD SHX Text
NIBCO GATE VALVE (LEAD FREE) (LINE SIZE)
AutoCAD SHX Text FLUSH VALVE (SEE DETAIL) - KBI SCHEDULE 80 PVC FULL PORT BALL VALVE (SLIP X SLIP) (LINE SIZE)
AutoCAD SHX Text
LT-S
AutoCAD SHX Text
RAIN BIRD AIR RELEASE & VACUUM RELIEF VALVE
AutoCAD SHX Text
ARV050
AutoCAD SHX Text
RAIN BIRD DRIP SYSTEM OPERATION INDICATOR
AutoCAD SHX Text
OPERIND - (SEE SUB-SURFACE DRIP LAYOUT DETAILS)
AutoCAD SHX Text LH - LAWN/HIGH WATER - LAWN/HIGH WATER LM - LAWN/MODERATE WATER - LAWN/MODERATE WATER LL - LAWN/LOW WATER - LAWN/LOW WATER SH - SHRUB & GROUNDCOVER/HIGH WATER - SHRUB & GROUNDCOVER/HIGH WATER SM - SHRUB & GROUNDCOVER/MODERATE WATER - SHRUB & GROUNDCOVER/MODERATE WATER SL - SHRUB & GROUNDCOVER/LOW WATER - SHRUB & GROUNDCOVER/LOW WATER TH - TREE/HIGH WATER - TREE/HIGH WATER TM - TREE/MODERATE WATER - TREE/MODERATE WATER TL - TREE/LOW WATER- TREE/LOW WATER
AutoCAD SHX Text
CONTROLLER & STATION NUMBER
AutoCAD SHX Text
APPROXIMATE FLOW (GPM)
AutoCAD SHX Text
PLANT TYPE/WATER REQUIREMENT/HYDROZONE
AutoCAD SHX Text
PRECIPITATION RATE
AutoCAD SHX Text
REMOTE CONTROL VALVE SIZE
AutoCAD SHX Text TYPE 'K' COPPER PIPE WITH WROUGHT COPPER SOLDER JOINT FITTINGS. ROUTING AND INSTALLATION THROUGH STRUCTURE SHALL BE PROVIDED UNDER PLUMBING CONTRACT.
AutoCAD SHX Text
COPPER PIPE:
AutoCAD SHX Text RAIN BIRD XFS-CV SUB-SURFACE DRIPLINE (XFS-CV-09-12) WITH COPPER SHIELD TECHNOLOGY AND HEAVY DUTY CHECK VALVE. INSTALL AS DETAILED 12" O.C. SEE DRIP IRRIGATION DETAILS FOR TUBING LAYOUT AND INSTALLATION METHODS. BOUNDARIES DEFINE AREAS FOR DRIPLINE TO BE CONNECTED TO ASSOCIATED REMOTE CONTROL VALVES AS DEPICTED IN THE DRAWING. 4" COVER.
AutoCAD SHX Text
SUB-SURFACE DRIP BOUNDARY:
AutoCAD SHX Text IRRIGATION NOTES 1. THESE IRRIGATION DRAWINGS ARE DIAGRAMMATIC AND INDICATIVE OF THE WORK TO BE INSTALLED. ALL PIPING, VALVES, ETC. SHOWN WITHIN PAVED AREAS IS FOR CLARITY ONLY AND ARE TO BE INSTALLED WITHIN PLANTING AREAS WHERE POSSIBLE. DUE TO THE SCALE OF THE DRAWINGS, IT IS NOT POSSIBLE TO INDICATE ALL OFFSETS, FITTINGS, SLEEVES, ETC., WHICH MAY BE REQUIRED. THE CONTRACTOR IS REQUIRED TO INVESTIGATE THE STRUCTURAL AND FINISHED CONDITIONS AFFECTING ALL OF THE CONTRACT WORK INCLUDING OBSTRUCTIONS, GRADE DIFFERENCES OR AREA DIMENSIONAL DIFFERENCES WHICH MAY NOT HAVE BEEN CONSIDERED IN THE ENGINEERING. IN THE EVENT OF FIELD DIFFERENCES, THE CONTRACTOR IS REQUIRED TO PLAN THE INSTALLATION WORK ACCORDINGLY BY NOTIFICATION AND APPROVAL OF THE OWNER'S AUTHORIZED REPRESENTATIVE AND ACCORDING TO THE CONTRACT SPECIFICATION. THE CONTRACTOR IS ALSO REQUIRED TO NOTIFY AND COORDINATE IRRIGATION CONTRACT WORK WITH ALL APPLICABLE CONTRACTORS FOR THE LOCATION AND INSTALLATION OF PIPE, CONDUIT OR SLEEVES THROUGH OR UNDER WALLS, ROADWAYS, PAVING, STRUCTURE, ETC., BEFORE CONSTRUCTION. IN THE EVENT THESE NOTIFICATIONS ARE NOT PERFORMED, THE CONTRACTOR SHALL ASSUME FULL RESPONSIBILITY FOR ALL REQUIRED REVISIONS. 2. THE CONTRACTOR SHALL EXERCISE CARE IN LOCATING PIPING AS TO NOT CONFLICT WITH OTHER UTILITIES. DO NOT INSTALL IRRIGATION PIPING PARALLEL TO AND DIRECTLY OVER OTHER UTILITIES. 3. THE INTENT OF THIS IRRIGATION SYSTEM IS TO PROVIDE THE MINIMUM AMOUNT OF WATER REQUIRED TO SUSTAIN GOOD PLANT HEALTH. 4. IT IS THE RESPONSIBILITY OF THE LANDSCAPE MAINTENANCE CONTRACTOR AND/OR OWNER TO PROGRAM THE IRRIGATION CONTROLLERS TO PROVIDE THE MINIMUM AMOUNT OF WATER NEEDED TO SUSTAIN GOOD PLANT HEALTH. THIS INCLUDES MAKING ADJUSTMENTS TO THE PROGRAM FOR SEASONAL WEATHER CHANGES, PLANT MATERIAL WATER REQUIREMENTS, MOUNDS AND SLOPES, SUN, SHADE, AND WIND EXPOSURES. 5. AT THE END OF THE REQUIRED MAINTENANCE PERIOD OF THE CONTRACTOR, THE OWNER SHALL PROVIDE REGULAR MAINTENANCE OF THE IRRIGATION SYSTEM TO ENSURE THE EFFICIENT USE OF WATER. MAINTENANCE SHALL INCLUDE, BUT NOT BE LIMITED TO CHECKING, ADJUSTING, AND REPAIRING IRRIGATION EQUIPMENT AND CONTROL SYSTEM. 6. THIS IRRIGATION SYSTEM INTERFACES WITH AN EXISTING IRRIGATION SYSTEM WHICH IS TO REMAIN IN SERVICE. THE EXISTING UNDERGROUND IRRIGATION EQUIPMENT AND OTHER UTILITIES HAVE NOT BEEN FIELD VERIFIED UNDER THE CONSTRUCTION DOCUMENT PHASE OF WORK. THE CONTRACTOR IS TO FIELD VERIFY THE LOCATION OF EXISTING IRRIGATION MAINLINE PIPING, LATERAL LINE PIPING, LOW VOLTAGE AND HIGH VOLTAGE WIRE, COMMUNICATION CABLE, AND VALVES BEFORE CONSTRUCTION IS STARTED. DAMAGE TO THE EXISTING IRRIGATION SYSTEM AND OTHER VARIOUS UTILITIES SHALL BE REPAIRED BY THE CONTRACTOR AT NO ADDITIONAL EXPENSE TO THE OWNER. THE CONTRACTOR IS RESPONSIBLE FOR MAINTAINING THE CURRENT OPERATION OF THE EXISTING IRRIGATION SYSTEM WHICH SERVICES AREAS OUTSIDE OF THE CONTRACT WORK AREA. DO NOT SHUT DOWN GATE VALVES, SEVER MAIN OR LATERAL PIPING, AND/OR SEVER WIRE WHICH ORIGINATES IN OR TRAVELS THROUGH THIS CONTRACT WORK AREA UNLESS SPECIFICALLY DIRECTED TO DO SO BY THE CONTRACT DOCUMENTS OR BY WRITTEN APPROVAL FROM THE ARCHITECT. LANDSCAPE STRESS OUTSIDE OF THIS CONTRACT AREA WILL REQUIRE FULL REPLACEMENT OF THE LANDSCAPE DAMAGED UNDER THIS CONTRACT WORK AT NO ADDITIONAL EXPENSE TO THE OWNER. IF THE CONTRACTOR IS NOT AGREEABLE TO THIS CONDITION THEN THE CONTRACTOR MUST STATE THIS IN THE BID PROPOSAL DOCUMENTS. 7. 120 VOLT A.C. (2.5 AMP DEMAND) ELECTRICAL SERVICE TO IRRIGATION CONTROLLER LOCATION TO BE PROVIDED UNDER ELECTRICAL CONTRACT WORK. IRRIGATION CONTRACTOR TO MAKE FINAL CONNECTION FROM ELECTRICAL STUB-OUT TO CONTROLLER AND PROVIDE PROPER GROUNDING PER CONTROLLER MANUFACTURER'S INSTRUCTIONS. 8. IRRIGATION CONTROLLER TO HAVE ITS OWN INDEPENDENT 24 VOLT COMMON GROUND WIRE. 9. CONTRACTOR SHALL PROGRAM THE IRRIGATION CONTROLLER TO PROVIDE IRRIGATION TO ALL PLANTING WITHIN THE ALLOWED WATERING WINDOW OF TIME AS REQUIRED. THE CONTRACTOR SHALL CREATE CONTROLLER PROGRAMING THAT WILL NOT EXCEED THE MAXIMUM GALLONS PER MINUTE FLOW RATE STATED ON THE DRAWINGS, AND NOT EXCEED THE CAPACITY OF ANY MAINLINE PIPING. 10. IRRIGATION CONTROL WIRES SHALL BE COPPER WITH U.L. APPROVAL FOR DIRECT BURIAL IN GROUND, SIZE #14-1. COMMON GROUND WIRE SHALL HAVE WHITE INSULATING JACKET. CONTROL WIRE SHALL HAVE INSULATING JACKET OF COLOR OTHER THAN WHITE. SPLICE SHALL BE MADE WITH 3M-DBR/Y-6 SEAL PACKS. 11. SPLICING OF 24 VOLT WIRES IS NOT PERMITTED EXCEPT IN VALVE BOXES. SEAL WIRE SPLICES WITH 3M-DBR/Y-6 SPLICE SEALING DEVICES OF SIZE COMPATIBLE WITH WIRE SIZE. LEAVE A 36" LONG, 1" DIAMETER COIL OF EXCESS WIRE AT EACH SPLICE AND A 36" LONG EXPANSION LOOP EVERY 100 FEET ALONG WIRE RUN. TAPE WIRES TOGETHER EVERY TEN FEET. TAPING WIRES IS NOT REQUIRED INSIDE SLEEVES. 12. PLASTIC VALVE BOXES ARE TO BE BLACK IN COLOR WITH BOLT DOWN, NON-HINGED COVER MARKED "IRRIGATION". BOX BODY SHALL HAVE KNOCK OUTS. MANUFACTURER SHALL BE RAIN BIRD. 13. INSTALL REMOTE CONTROL VALVE BOXES 12" FROM WALK, CURB, LAWN, HEADER BOARD, BUILDING, OR LANDSCAPE FEATURE. AT MULTIPLE VALVE BOX GROUPS, EACH BOX SHALL BE AN EQUAL DISTANCE FROM THE WALK, CURB, LAWN, ETC. AND EACH BOX SHALL BE 12" APART. SHORT SIDE OF RECTANGULAR VALVE BOXES SHALL BE PARALLEL TO WALK, CURB, ETC. 14. VALVE LOCATIONS SHOWN ARE DIAGRAMMATIC. INSTALL IN GROUND COVER/SHRUB AREAS WHERE POSSIBLE (NOT IN LAWN AREA). 15. THE IRRIGATION CONTRACTOR SHALL FLUSH AND ADJUST ALL SPRINKLER HEADS FOR OPTIMUM PERFORMANCE AND TO PREVENT OVER SPRAY ONTO WALKS, ROADWAYS, AND/OR BUILDINGS AS MUCH AS POSSIBLE. THIS SHALL INCLUDE SELECTING THE BEST DEGREE OF ARC TO FIT THE EXISTING SITE CONDITIONS AND TO THROTTLE THE FLOW CONTROL AT EACH VALVE TO OBTAIN THE OPTIMUM OPERATING PRESSURE FOR EACH SYSTEM. 16. THE IRRIGATION CONTRACTOR SHALL FLUSH ALL SYSTEMS FOR OPTIMUM PERFORMANCE AND COVERAGE OF THE LANDSCAPE AREA. THIS SHALL INCLUDE ADJUSTING THE FLOW CONTROL AT EACH VALVE TO OBTAIN THE OPTIMUM OPERATING PRESSURE FOR EACH SYSTEM. 17. ALL SPRINKLER HEADS SHALL BE SET PERPENDICULAR TO FINISH GRADE OF THE AREA TO BE IRRIGATED UNLESS OTHERWISE NOTED ON THE DRAWINGS. 18. ALL IRRIGATION PIPING THAT IS NOT A DIRECT LINE TO TREES SHALL BE A MINIMUM FIVE (5) FEET FROM CENTER OF TREE. 19. LOCATE BUBBLERS ON UP-HILL SIDE OF PLANT OR TREE. 20. INSTALL A FLO CONTROL (NDS) 1002 SERIES SPRING LOADED CHECK VALVE BELOW THOSE SPRINKLERS WHERE LOW HEAD DRAINAGE WILL CAUSE EROSION AND/OR EXCESS WATER. 21. WHERE IT IS NECESSARY TO EXCAVATE ADJACENT TO EXISTING TREES, THE CONTRACTOR SHALL USE ALL POSSIBLE CARE TO AVOID INJURY TO TREES AND TREE ROOTS. EXCAVATION IN AREAS WHERE TWO (2) INCH AND LARGER ROOTS OCCUR SHALL BE DONE BY HAND. TRENCHES ADJACENT TO TREE SHOULD BE CLOSED WITHIN TWENTY-FOUR (24) HOURS; AND WHERE THIS IS NOT POSSIBLE, THE SIDE OF THE TRENCH ADJACENT TO THE TREE SHALL BE KEPT SHADED WITH BURLAP OR CANVAS. 22. IRRIGATION CONTRACTOR TO NOTIFY ALL LOCAL JURISDICTIONS FOR INSPECTION AND TESTING OF EXISTING BACKFLOW PREVENTION DEVICE. REPAIR OR REPLACE AS TEST RESULTS INDICATE. 23. PRESSURE TEST PROCEDURE. THE CONTRACTOR SHALL: A. NOTIFY ARCHITECT AT LEAST THREE (3) DAY IN ADVANCE OF TESTING. B. PERFORM TESTING AT HIS OWN EXPENSE. C. CENTER LOAD PIPING WITH SMALL AMOUNT OF BACKFILL TO PREVENT ARCHING OR SLIPPING UNDER PRESSURE. NO FITTING SHALL BE COVERED. D. APPLY THE FOLLOWING TESTS AFTER WELD PLASTIC PIPE JOINTS HAVE CURED AT LEAST 24 HOURS. 1. TEST LIVE (CONSTANT PRESSURE) AND QUICK COUPLER LINE HYDROSTATICALLY AT 125 PSI MINIMUM. LINES WILL BE APPROVED IF TEST PRESSURE IS MAINTAINED FOR SIX (6) HOURS. THE LINE WILL BE APPROVED OR NOT APPROVED AS SUCH RESULTS MAY INDICATE. THE CONTRACTOR SHALL MAKE TESTS AND REPAIRS AS NECESSARY UNTIL TEST CONDITIONS ARE MET. 2. TEST RCV CONTROLLED LATERAL LINES WITH WATER AT LINE PRESSURE AND VISUALLY INSPECT FOR LEAKS. RETEST AFTER CORRECTING DEFECTS. 24. THE SPRINKLER SYSTEM DESIGN IS BASED ON THE MINIMUM OPERATING PRESSURE SHOWN ON THE IRRIGATION DRAWINGS. THE IRRIGATION CONTRACTOR SHALL VERIFY WATER PRESSURE PRIOR TO CONSTRUCTION. REPORT ANY DIFFERENCE BETWEEN THE WATER PRESSURE INDICATED ON THE DRAWINGS AND THE ACTUAL PRESSURE READING AT THE IRRIGATION POINT OF CONNECTION TO THE OWNER'S AUTHORIZED REPRESENTATIVE. 25. IRRIGATION DEMAND: ____ GPM AT ____ PSI STATIC PRESSURE AT IRRIGATION POINT OF CONNECTION. FIELD VERIFY WATER PRESSURE PRIOR TO CONSTRUCTION. IF ACTUAL WATER PRESSURE DIFFERS FROM THE STATED PRESSURE CONTACT ARCHITECT FOR DIRECTION AND POSSIBLE REVISION. 26. THE EXISTING MAINLINE SHOWN ON THE DRAWINGS IS DIAGRAMMATIC. CONTRACTOR TO VERIFY AND LOCATE EXISTING MAINLINE IN FIELD. ANY DEVIATION OF EXISTING MAINLINE LOCATION AS SHOWN ON THE DRAWINGS IS TO BE REPORTED TO ARCHITECT FOR REVIEW AND POSSIBLE REVISION. 27. PIPE THREAD SEALANT COMPOUND SHALL BE RECTOR SEAL T+2, CHRISTY'S ULTRA SEAL, OR APPROVED EQUAL. 28. SUB-SURFACE DRIP IRRIGATION AREAS MUST BE HAND WATERED TO INCREASE SOIL MOISTURE PRIOR TO PLANTING. AFTER PLANTING, THE SUB-SURFACE DRIP SYSTEMS MUST BE OPERATED ON A FREQUENT BASIS TO MAINTAIN SOIL MOISTURE CONTENT. DO NOT ALLOW SOIL TO DRY OUT. MAINTENANCE ROUTINE SHALL INCLUDE PROBING SOIL TO MONITOR MOISTURE CONTENT. USE CAUTION WHEN PROBING SOIL. DO NOT DAMAGE SUB-SURFACE DRIP TUBING. 29. RECORD DRAWINGS: A. THE CONTRACTOR SHALL MAINTAIN IN GOOD ORDER IN THE FIELD OFFICE ONE COMPLETE SET OF BLACK LINE PRINTS OF ALL SPRINKLER DRAWINGS WHICH FORM A PART OF THE CONTRACT, SHOWING ALL WATER LINES, SPRINKLERS, VALVES, CONTROLLERS AND STUB-OUTS. IN THE EVENT ANY WORK IS NOT INSTALLED AS INDICATED ON THE DRAWINGS, SUCH WORK SHALL BE CORRECTED AND DIMENSIONED ACCURATELY FROM THE BUILDING WALLS. B. ALL UNDERGROUND STUB-OUTS FOR FUTURE CONNECTIONS AND VALVES SHALL BE LOCATED AND DIMENSIONED ACCURATELY FROM BUILDING WALLS ON ALL RECORD DRAWINGS. C. UPON COMPLETION OF THE WORK, OBTAIN REPRODUCIBLE PRINTS FROM ARCHITECT AND NEATLY CORRECT THE PRINTS TO SHOW THE AS-BUILT CONDITIONS. 30. FINE TUNE IRRIGATION SYSTEM TO PROVIDE COMPLETE AND UNIFORM COVERAGE OF THE LANDSCAPE WHILE AVOIDING RUNOFF OF WATER ONTO NON-IRRIGATED AREAS, PAVED AND OTHERWISE. THIS INCLUDES PROGRAMMING THE CONTROLLER RUN TIMES FOR OPTIMIZING SOIL INFILTRATION WITH OUT PUDDLING OR RUNOFF. 31. WARRANTY: A. IT SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR TO FILL AND REPAIR ALL NECESSARY PLANTING DUE TO THE SETTLEMENT OF IRRIGATION TRENCHES FOR ONE YEAR FOLLOWING COMPLETION AND ACCEPTANCE OF THE JOB. B. THE CONTRACTOR SHALL ALSO WARRANTY ALL MATERIALS, EQUIPMENT AND WORKMANSHIP FURNISHED BY HIM TO BE FREE OF ALL DEFECTS OF WORKMANSHIP AND MATERIALS, AND SHALL AGREE TO REPLACE AT HIS EXPENSE, AT ANY TIME WITHIN ONE YEAR AFTER INSTALLATION IS ACCEPTED, ANY AND ALL DEFECTIVE PARTS THAT MAY BE FOUND.
AutoCAD SHX Text L A N D S C A P E I R R I G A T I O N
AutoCAD SHX Text
DICKSON & ASSOCIATES, INC.
AutoCAD SHX Text
MARTY DICKSON, ASIC-PIC
AutoCAD SHX Text TEL(530) 547-5515 www.dicksoninc.net
AutoCAD SHX Text
P.O. BOX 415
AutoCAD SHX Text
PALO CEDRO, CALIFORNIA 96073
AutoCAD SHX Text c Dickson & Associates, Inc.
AutoCAD SHX Text IRRIGATION COORDINATION NOTES 1. ALL COPPER PIPING WITHIN STRUCTURE SHALL BE PROVIDED, ROUTED, AND INSTALLED BY PLUMBING CONTRACTOR. EXIT OF PIPE TO BE 18" BELOW FINISH GRADE. 2. IRRIGATION SLEEVING AND/OR CONDUIT IN STRUCTURE TO BE PROVIDED AND INSTALLED UNDER STRUCTURAL WORK. 3. ELECTRICAL CONTRACTOR TO PROVIDE CONDUIT, PULL BOXES AND WIRE IN STRUCTURE. THE DRAWINGS INDICATE REQUIRED WIRE QUANTITIES FROM A GIVEN PLANTER LOCATION, THROUGH STRUCTURE, TO THE CONTROLLER LOCATION. 14 GAUGE WIRE SHALL BE USED FOR CONTROL WIRING AND 12 GAUGE FOR COMMON GROUND. FINAL CONNECTION OF WIRING TO REMOTE CONTROL VALVES AND CONTROLLER SHALL BE COMPLETED BY IRRIGATION CONTRACTOR. 4. CONDUIT FOR CONTROL WIRE AND WEATHER SENSOR WIRE SHALL BE INSTALLED UNDER ELECTRICAL CONTRACT WORK. COORDINATE WITH ARCHITECT FOR WEATHER SENSOR LOCATION AND CONDUIT ROUTING.
AutoCAD SHX Text SiteOne GREEN TECH CONTROLLER ASSEMBLY WITH HUNTER ACC2 CONTROLLER, PRIMARY LINE PROTECTION, (HOUSED IN A WALL MOUNT STAINLESS STEEL STRONG BOX ENCLOSURE), AND WIRELESS SOLAR SYNC SENSOR ASSEMBLY. CONTACT JIM WELLER SiteOne GREEN TECH REPRESENTATIVE FOR ORDER, PURCHASE AND WARRANTY. (925.451.1610)
AutoCAD SHX Text
CA16-HU4-36/HWSS/LPP
AutoCAD SHX Text C
AutoCAD SHX Text
SS
AutoCAD SHX Text
HUNTER WIRELESS SOLAR SYNC SENSOR
AutoCAD SHX Text
WSS-SEN (PART OF CONTROLLER EQUIPMENT PACKAGE)
AutoCAD SHX Text RAIN BIRD CONTROL ZONE KIT - 1 " PESB VALVE 12" PESB VALVE AND TWO 1" PRESSURE REGULATING (40 PSI) QUICK CHECK BASKET FILTERS (200 MESH) AND SCHEDULE 80 PVC FULL PORT BALL VALVE
AutoCAD SHX Text
XCZ-100-PRB-COM (1 GPM TO 19 GPM)
AutoCAD SHX Text
XCZ-150-PRB-COM/LT-T (20 GPM TO 40 GPM)
AutoCAD SHX Text
WATER EFFICIENT LANDSCAPE WORKSHEET-WELO
IRRIGATION WATERING SCHEDULES
50 United Nations Plaza, 3rd Floor San Francisco, CA 94102
SENSITIVE BUT UNCLASSIFIED (SBU)
PROPERTY OF
THE UNITED STATES GOVERNMENT
FOR OFFICIAL USE ONLY
Do not remove this notice Properly destroy or return documents when no longer needed
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
DATE DRAFTED:
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text Planners
AutoCAD SHX Text Architects
AutoCAD SHX Text Engineers
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
1500 PARK AVENUE, STE 129 EMERYVILLE, CA 94608
AutoCAD SHX Text
GS-09P-15-KT-D-0008
AutoCAD SHX Text
GS-P-09-16-KT-7066
AutoCAD SHX Text
TECTONICS
AutoCAD SHX Text
RONALD V. DELLUMS FEDERAL BUILDING
AutoCAD SHX Text
1301 CLAY STREET
AutoCAD SHX Text
OAKLAND
AutoCAD SHX Text
CA
AutoCAD SHX Text 94612
AutoCAD SHX Text
CA 0281ZZ
AutoCAD SHX Text
REPLACEMENT OF LANDSCAPING AND
AutoCAD SHX Text
IRRIGATION SYSTEMS
AutoCAD SHX Text
LANDSCAPING IMPROVEMENT PROJECT
AutoCAD SHX Text
FOR GROUND AND 5TH FLOORS
AutoCAD SHX Text
JASON GUERRERO
AutoCAD SHX Text
95% CONSTRUCTION DOCUMENT SUBMITTAL
AutoCAD SHX Text
MARCH 20, 2019
AutoCAD SHX Text
ACC
AutoCAD SHX Text 03/20/2019
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
95% CD SUBMITTAL MAR 20, 2019
AutoCAD SHX Text
OF
AutoCAD SHX Text
IRRIGATION DETAILS
AutoCAD SHX Text
AutoCAD SHX Text L
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
/A/JOB/
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SYMBOL SIZE:
AutoCAD SHX Text
AutoCAD SHX Text
DELLUMS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1830L103
AutoCAD SHX Text L105
AutoCAD SHX Text
NONE
AutoCAD SHX Text 03-22-2019
AutoCAD SHX Text
CK
AutoCAD SHX Text
PVC MAINLINE
AutoCAD SHX Text
UPC APPROVED SCHEDULE 80 PVC TEE
AutoCAD SHX Text
REMOTE CONTROL VALVE WITH FLOW CONTROL AND MANUAL BLEED
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED FITTINGS (AS REQUIRED)
AutoCAD SHX Text
POLYURETHANE I.D. TAG WITH CONTROLLER AND STATION NUMBER
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
%%UREMOTE CONTROL VALVE
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED UNION
AutoCAD SHX Text
PEA GRAVEL - 4" DEEP BELOW VALVE (NO SOIL IN VALVE BOX)
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text C-1
AutoCAD SHX Text 6"
AutoCAD SHX Text
BRICK - 1 EACH CORNER
AutoCAD SHX Text
LOWER LATERAL LINE WITH SCHEDULE 40 PVC 45° ELLS
AutoCAD SHX Text 18"
AutoCAD SHX Text 12"
AutoCAD SHX Text
SCHEDULE 40 PVC MALE ADAPTER
AutoCAD SHX Text VALVE CONTROL WIRE - PROVIDE 3M DBR/Y-6 SEAL PACKS AT ALL SPLICES AND 36" OF EXCESS U.F. WIRE IN A 1" DIAMETER COIL
AutoCAD SHX Text
PVC LATERAL LINE
AutoCAD SHX Text
SCHEDULE 80 PVC NIPPLE
AutoCAD SHX Text RAIN BIRD VB SERIES RECTANGULAR PLASTIC VALVE BOX WITH BOLT DOWN LID. (VBSTDBKL STANDARD MODEL WITH BLACK LID) INSTALL BOX AS SHOWN IN BOX INSTALLATION DETAIL.
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED FITTINGS (AS REQUIRED)
AutoCAD SHX Text
POLYURETHANE I.D. TAG WITH CONTROLLER AND STATION NUMBER
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
PEA GRAVEL - 4" DEEP BELOW VALVE (NO SOIL IN VALVE BOX)
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text C-1
AutoCAD SHX Text 6"
AutoCAD SHX Text
BRICK - 1 EACH CORNER
AutoCAD SHX Text
LOWER LATERAL LINE WITH SCHEDULE 40 PVC 45° ELLS
AutoCAD SHX Text 18"
AutoCAD SHX Text 12"
AutoCAD SHX Text
SCHEDULE 40 PVC MALE ADAPTER
AutoCAD SHX Text VALVE CONTROL WIRE - PROVIDE 3M DBR/Y-6 SEAL PACKS AT ALL SPLICES AND 36" OF EXCESS UF WIRE IN A 1" DIAMETER COIL
AutoCAD SHX Text
PVC LATERAL LINE
AutoCAD SHX Text
SCHEDULE 80 PVC FULL PORT BALL VALVE
AutoCAD SHX Text RAIN BIRD PRB-QKCHK-100 SERIES 1" PRESSURE REGULATING BASKET FILTER WITH 200 MESH SCREEN
AutoCAD SHX Text
REMOTE CONTROL VALVE WITH FLOW CONTROL AND MANUAL BLEED
AutoCAD SHX Text 1"
AutoCAD SHX Text
PVC MAINLINE
AutoCAD SHX Text UPC APPROVED SCHEDULE 80 PVC TEE SxSxT
AutoCAD SHX Text
REMOTE CONTROL VALVE WITH FILTER & PRESSURE REGULATION FOR DRIP
AutoCAD SHX Text RAIN BIRD VB SERIES RECTANGULAR PLASTIC VALVE BOX WITH BOLT DOWN LID. (VBSTDBKL STANDARD MODEL WITH BLACK LID) INSTALL BOX AS SHOWN IN BOX INSTALLATION DETAIL.
AutoCAD SHX Text INSTRUCTIONS: 1. USE 3M-DBR/Y-6 WEATHER PROOF SPLICE. 2. STRIP WIRES APPROXIMATELY 1/2" (12.7 MM) TO EXPOSE WIRE. 3. TWIST CONNECTOR AROUND WIRES CLOCKWISE UNTIL HAND TIGHT, DO NOT OVERTIGHTEN. 4. INSERT WIRE ASSEMBLY INTO PLASTIC TUBE UNTIL WIRE CONNECTOR SNAPS PAST LIP IN BOTTOM OF TUBE. 5. PLACE WIRES WHICH EXIT TUBE IN WIRE EXIT HOLES AND CLOSE CAP UNTIL IT SNAPS. 6. INSPECT FINAL SPLICE ASSEMBLY TO BE SECURE AND FINISHED.
AutoCAD SHX Text
%%UWEATHERPROOF SPLICE ASSEMBLY
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text 2.
AutoCAD SHX Text 1.
AutoCAD SHX Text 1/2"
AutoCAD SHX Text 4.
AutoCAD SHX Text 3.
AutoCAD SHX Text 5.
AutoCAD SHX Text
PVC MAIN LINE
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED NIPPLE (TWO TOTAL)
AutoCAD SHX Text 18"
AutoCAD SHX Text
6" PVC PIPE
AutoCAD SHX Text
BRICK - 2 TOTAL
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%UGATE VALVE
AutoCAD SHX Text
PVC MALE ADAPTER
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED UNION (TWO TOTAL)
AutoCAD SHX Text 3"
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
PEA GRAVEL
AutoCAD SHX Text
RAIN BIRD VB SERIES 10" ROUND VALVE BOX WITH BOLT DOWN BLACK LID. (VB10RNDBKL)
AutoCAD SHX Text 1/2" SCHEDULE 40 PVC MALE ADAPTER (GRAY). MALE ADAPTER MUST BE GRAY IN COLOR. WHITE PVC SHALL NOT BE INSTALLED AT THIS LOCATION.
AutoCAD SHX Text 12"
AutoCAD SHX Text SxSxT SCHEDULE 40 PVC TEE OR SxT ELL IN PVC LATERAL LINE
AutoCAD SHX Text 1/2" IPS FLEXIBLE PVC HOSE (.840 FLEXIBLE PVC HOSE (.840 PVC HOSE (.840 O.D.) USE ONLY IPS WELD ON # 795 SOLVENT CEMENT ON THIS HOSE.
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
BUBBLER
AutoCAD SHX Text 1\2"
AutoCAD SHX Text 3"
AutoCAD SHX Text
SHRUB
AutoCAD SHX Text
%%USHRUB BUBBLER WITH FLEXIBLE RISER
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
1/2" SCHEDULE 40 PVC MALE ADAPTER
AutoCAD SHX Text
HARDSCAPE SURFACE (DRIVEWAY, WALK, ETC.)
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%USLEEVING INSTALLATION
AutoCAD SHX Text
PVC LATERAL OR MAINLINE
AutoCAD SHX Text
COMPACTED SUBGRADE
AutoCAD SHX Text 18"
AutoCAD SHX Text
IRRIGATION CONTROL WIRING
AutoCAD SHX Text 12"
AutoCAD SHX Text
IRRIGATION SLEEVE
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text NOTES: 1. SLEEVE UNDER VEHICULAR PAVING SHALL BE BURIED TO A DEPTH OF 24" COVER. 2. SLEEVE IS TO EXTEND 12" BEYOND EDGE OF PAVING.
AutoCAD SHX Text
1. ALL PLASTIC PIPING SHALL BE INSTALLED IN THE TRENCH IN A SERPENTINE MANNER AS PER THE MANNER AS PER THE MANNER AS PER THE AS PER THE AS PER THE PER THE PER THE THE THE MANUFACTURER'S SPECIFICATIONS. 2. ALL SUPPLY LINES TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. SUPPLY LINES TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. SUPPLY LINES TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. LINES TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. LINES TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. TO BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. BE INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. INSTALLED AS PER MANUFACTURER'S SPECIFICATIONS. AS PER MANUFACTURER'S SPECIFICATIONS. AS PER MANUFACTURER'S SPECIFICATIONS. PER MANUFACTURER'S SPECIFICATIONS. PER MANUFACTURER'S SPECIFICATIONS. MANUFACTURER'S SPECIFICATIONS. MANUFACTURER'S SPECIFICATIONS. 3. TAPE AND BUNDLE TUBING OR WIRING AT 10 FEET INTERVALS. AND BUNDLE TUBING OR WIRING AT 10 FEET INTERVALS. AND BUNDLE TUBING OR WIRING AT 10 FEET INTERVALS. BUNDLE TUBING OR WIRING AT 10 FEET INTERVALS. BUNDLE TUBING OR WIRING AT 10 FEET INTERVALS. TUBING OR WIRING AT 10 FEET INTERVALS. TUBING OR WIRING AT 10 FEET INTERVALS. OR WIRING AT 10 FEET INTERVALS. OR WIRING AT 10 FEET INTERVALS. WIRING AT 10 FEET INTERVALS. WIRING AT 10 FEET INTERVALS. AT 10 FEET INTERVALS. AT 10 FEET INTERVALS. 10 FEET INTERVALS. 10 FEET INTERVALS. FEET INTERVALS. FEET INTERVALS. INTERVALS. INTERVALS. 4. ALL 120 VOLT WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. 120 VOLT WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. 120 VOLT WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. VOLT WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. VOLT WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. WIRING IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. IN CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. CONDUIT TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. TO BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. IN ACCORDANCE WITH ALL APPLICABLE CODES. IN ACCORDANCE WITH ALL APPLICABLE CODES. ACCORDANCE WITH ALL APPLICABLE CODES. ACCORDANCE WITH ALL APPLICABLE CODES. 5. BACKFILL MATERIAL SHALL BE THE EARTH EXCAVATED FROM THE TRENCHES, FREE FROM ROCKS, CONCRETE CHUNKS, AND OTHER FOREIGN OR COARSE MATERIALS. CAREFULLY SELECT BACKFILL THAT IS TO BE PLACED NEXT TO PLASTIC PIPE TO AVOID ANY SHARP OBJECTS WHICH MAY DAMAGE THE PIPE.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%UTRENCHING DETAIL
AutoCAD SHX Text
%%UJOINT TRENCH
AutoCAD SHX Text
MAIN LINE SUPPLY
AutoCAD SHX Text
WIRING
AutoCAD SHX Text
LATERAL
AutoCAD SHX Text
%%UMAIN SUPPLY
AutoCAD SHX Text 3"
AutoCAD SHX Text 6"
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text 12"
AutoCAD SHX Text 18"
AutoCAD SHX Text
%%ULATERAL
AutoCAD SHX Text
MAIN LINE SUPPLY
AutoCAD SHX Text
COMPACTED SOIL
AutoCAD SHX Text
DRIP LINE
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
LATERAL
AutoCAD SHX Text 12"
AutoCAD SHX Text 6"
AutoCAD SHX Text
HUNTER SWING JOINT (HSJ-0-3-T-2-18)
AutoCAD SHX Text
PEA GRAVEL
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text 18"
AutoCAD SHX Text 2"
AutoCAD SHX Text
BRICK-2 TOTAL
AutoCAD SHX Text
STAINLESS STEEL PIPE CLAMP
AutoCAD SHX Text
%%USIDE VIEW
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%UQUICK COUPLING VALVE
AutoCAD SHX Text
#3 REBAR 36" LENGTH
AutoCAD SHX Text
34" QUICK COUPLING VALVE
AutoCAD SHX Text
RAIN BIRD VB SERIES 10" ROUND VALVE BOX WITH BOLT DOWN BLACK LID. (VB10RNDBKL)
AutoCAD SHX Text
%%UTOP VIEW
AutoCAD SHX Text
PVC MAINLINE
AutoCAD SHX Text
HUNTER SWING JOINT (HSJ-0-3-T-2-18)
AutoCAD SHX Text
BUBBLER
AutoCAD SHX Text 1/2" IPS FLEXIBLE PVC HOSE (.840 FLEXIBLE PVC HOSE (.840 PVC HOSE (.840 O.D.) USE ONLY IPS WELD ON # 795 SOLVENT CEMENT ON THIS HOSE.
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%UTREE BUBBLER
AutoCAD SHX Text
TREE ROOT BALL
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text 12"
AutoCAD SHX Text
TREE
AutoCAD SHX Text SxSxT SCHEDULE 40 PVC TEE OR SxT ELL IN PVC LATERAL LINE
AutoCAD SHX Text 8"
AutoCAD SHX Text
TYPICAL
AutoCAD SHX Text
REFER TO LANDSCAPE PLANTING DRAWINGS FOR DEPTH OF MULCH COVER
AutoCAD SHX Text 1/2" SCHEDULE 40 PVC MALE ADAPTER (GRAY). MALE ADAPTER MUST BE GRAY IN COLOR. WHITE PVC SHALL NOT BE INSTALLED AT THIS LOCATION.
AutoCAD SHX Text
1/2" SCHEDULE 40 PVC MALE ADAPTER
AutoCAD SHX Text STRONG BOX CONTROLLER SUBASSEMBLY WITH 120 VOLT A.C. 0N-OFF SWITCH & TERMINAL STRIP
AutoCAD SHX Text
ENCLOSURE DOOR
AutoCAD SHX Text
TERMINAL STRIP
AutoCAD SHX Text
CONTROLLER TO BE MOUNTED ON MOUNTING PANEL OF ENCLOSURE
AutoCAD SHX Text
INTERIOR WALL
AutoCAD SHX Text 120 VOLT A.C. ELECTRICAL SERVICE FROM SOURCE TO CONTROLLER LOCATION PROVIDED BY ELECTRICAL CONTRACTOR. IRRIGATION CONTRACTOR TO PROVIDE RIGID STEEL CONDUIT FROM SERVICE STUB-OUT TO CONTROLLER GFI SWITCH AND COMPLETE ELECTRICAL SERVICE TO CONTROLLER.
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
%%UINTERIOR WALL MOUNT CONTROLLER
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text GRAY PVC ELECTRICAL CONDUIT WITH SWEEP ELL FOR LOW VOLTAGE WIRE PROVIDED UNDER IRRIGATION CONTRACT
AutoCAD SHX Text
NOTE: PAINT ALL CONDUITS TO MATCH WALL COLOR.
AutoCAD SHX Text
STRONG BOX STAINLESS STEEL CONTROLLER ENCLOSURE MODEL #SB-18SSW.
AutoCAD SHX Text
WIRELESS SOLAR SYNC RECEIVER
AutoCAD SHX Text
%%UWIRELESS SOLAR SYNC SENSOR
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
ON ROOF OR STRUCTURE
AutoCAD SHX Text
SOLAR SYNC SENSORS
AutoCAD SHX Text
MOUNTING BRACKET
AutoCAD SHX Text
ANTENNA
AutoCAD SHX Text NOTE: INSTALL SOLAR SYNC SYSTEM AT A FIELD DETERMINED LOCATION. SOLAR SYNC MUST RECEIVE UNOBSTRUCTED RAINFALL AND SUN EXPOSURE.
AutoCAD SHX Text
%%USUB-SURFACE INSTALLATION LAYOUT
AutoCAD SHX Text
WATER SOURCE
AutoCAD SHX Text
REMOTE CONTROL VALVE
AutoCAD SHX Text
FILTRATION MANIFOLD
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
PVC MANIFOLD
AutoCAD SHX Text
PVC FLUSH LINE
AutoCAD SHX Text PVC SxSxT TEE (TYPICAL)
AutoCAD SHX Text PVC SxT ELL (TYPICAL
AutoCAD SHX Text
DRIPLINE
AutoCAD SHX Text
FLUSH VALVE
AutoCAD SHX Text
AIR RELIEF VALVE - INSTALL AT HIGHEST POINT OF ELEVATION OF CIRCUIT
AutoCAD SHX Text BARB x THREAD MALE ADAPTER (TYPICAL)
AutoCAD SHX Text
OPERATION INDICATOR
AutoCAD SHX Text
%%USUB-MANIFOLD CENTER FEED
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text 12"
AutoCAD SHX Text 4"
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
PVC SUB-MANIFOLD
AutoCAD SHX Text
PVC CROSS (SXSXSXS)
AutoCAD SHX Text
RAIN BIRD XFS-CV COMPRESSION ADAPTER
AutoCAD SHX Text
PVC TEE (SXSXS)
AutoCAD SHX Text
RAIN BIRD XFS-CV SUB-SURFACE DRIPLINE LATERAL
AutoCAD SHX Text
PVC LATERAL LINE FROM DRIP MANIFOLD
AutoCAD SHX Text RAIN BIRD TDS-050 BEND GALVANIZED TIE-DOWN STAKE - INSTALL AT 4'-6' O.C. AND AT ALL FITTINGS (TEES, ELLS, ETC.)
AutoCAD SHX Text
%%USUB-SURFACE INSTALLATION LAYOUT-ENDFEED
AutoCAD SHX Text
WATER SOURCE
AutoCAD SHX Text
REMOTE CONTROL VALVE
AutoCAD SHX Text
FILTRATION MANIFOLD
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
PVC MANIFOLD
AutoCAD SHX Text
PVC FLUSH LINE
AutoCAD SHX Text PVC SxSxT TEE (TYPICAL)
AutoCAD SHX Text PVC SxT ELL (TYPICAL)
AutoCAD SHX Text
DRIPLINE
AutoCAD SHX Text
FLUSH VALVE
AutoCAD SHX Text
AIR RELIEF VALVE - INSTALL AT HIGHEST POINT OF ELEVATION OF CIRCUIT
AutoCAD SHX Text BARB x THREAD MALE ADAPTER (TYPICAL)
AutoCAD SHX Text
OPERATION INDICATOR
AutoCAD SHX Text
%%UMANIFOLD END FEED
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text 12"
AutoCAD SHX Text 4"
AutoCAD SHX Text
RAIN BIRD XFF FITTING
AutoCAD SHX Text
POLY TUBING LENGTH AS NECESSARY
AutoCAD SHX Text
PVC TEE (SXSXT) WITH " FPT OUTLET12" FPT OUTLET
AutoCAD SHX Text
PVC SUPPLY MANIFOLD FROM DRIP MANIFOLD
AutoCAD SHX Text
RAIN BIRD XFF-MA MALE ADAPTER FITTING
AutoCAD SHX Text
RAIN BIRD XFS-CV SUB-SURFACE DRIPLINE LATERAL
AutoCAD SHX Text RAIN BIRD TDS-050 BEND GALVANIZED TIE-DOWN STAKE - INSTALL AT 4'-6' O.C. AND AT ALL FITTINGS (TEES, ELLS, ETC.)
AutoCAD SHX Text L A N D S C A P E I R R I G A T I O N
AutoCAD SHX Text
DICKSON & ASSOCIATES, INC.
AutoCAD SHX Text
MARTY DICKSON, ASIC-PIC
AutoCAD SHX Text TEL(530) 547-5515 www.dicksoninc.net
AutoCAD SHX Text
P.O. BOX 415
AutoCAD SHX Text
PALO CEDRO, CALIFORNIA 96073
AutoCAD SHX Text c Dickson & Associates, Inc.
AutoCAD SHX Text
%%UTUBING TO PVC CONNECTION
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
MALE ADAPTER
AutoCAD SHX Text
PVC LATERAL LINE
AutoCAD SHX Text PVC TEE (SxSxT)
AutoCAD SHX Text
TUBING
AutoCAD SHX Text
SCHEDULE 80 PVC THREADED NIPPLE (INCLUDED IN XCZ-PRB-150-COM KIT)
AutoCAD SHX Text
POLYURETHANE I.D. TAG WITH CONTROLLER AND STATION NUMBER
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
PEA GRAVEL - 4" DEEP BELOW VALVE (NO SOIL IN VALVE BOX)
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text C-1
AutoCAD SHX Text 6"
AutoCAD SHX Text
BRICK - 1 EACH CORNER
AutoCAD SHX Text
LOWER…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .