AM0003 07 16 24.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

5P2QBA

Gregory Karpovics, Contracting Officer

See below for additional information

R5 AMD Building Services Contracting Branch Chicagoland Team 230 S. Dearborn St.

Chicago, IL 60604 USA

47PF0024R0059

1 6

07/16/2024

INSTRUCTIONS (Back Page):

Instructions for items other than those that are self-explanatory, are as follows:

Item 1 (Contract ID Code). Insert the contract type identification code that appears in the title block of the contract being modified.

Item 3 (Effective date).

(1)

(2)

(3)

(4)

(5)

For a solicitation amendment, change order, or administrative change, the effective date shall be the issue date of the amendment, change order, or administrative change.

For a supplemental agreement, the effective date shall be the date agreed to by the contracting parties.

For a modification issued as an initial or confirming notice of termination for the convenience of the Government, the effective date and the modification number of the confirming notice shall be the same as the effective date and modification number of the initial notice.

For a modification converting a termination for default to a termination for the convenience of the Government, the effective date shall be the same as the effective date of the termination for default.

For a modification confirming the contracting officer's determination of the amount due in settlement of a contract termination, the effective date shall be the same as the effective date of the initial decision.

(a)

(b)

(c)

(d)

(e)

(f)

Item 6 (Issued By). Insert the name and address of the issuing office. If applicable, insert the appropriate issuing office code in the code block.

Item 8 (Name and Address of Contractor). For modifications to a contract or order, enter the contractor's name, address, and code as shown in the original contract or order, unless changed by this or a previous modification.

Items 9, (Amendment of Solicitation Number - Dated), and 10, (Modification of Contract/Order Number - Dated). Check the appropriate box and in the corresponding blanks insert the number and date of the original solicitation, contract, or order.

Item 12 (Accounting and Appropriation Data).

When appropriate, indicate the impact of the modification on each affected accounting classification by inserting one of the following entries:

(2) Accounting classification Net decrease $

Include subject matter or short title of solicitation/contract where feasible.

Item 16B. The contracting officer's signature is not required on solicitation amendments. The contracting officer's signature is normally affixed last on supplemental agreements.

(i)

NOTE: If there are changes to multiple accounting classifications that cannot be placed in block 12, insert an asterisk and the words "See continuation sheet".

Item 13. Check the appropriate box to indicate the type of modification. Insert in the corresponding blank the authority under which the modification is issued. Check whether or not contractor must sign this document. (See FAR 43.103.)

Item 14 (Description of Amendment/Modification).

Organize amendments or modifications under the appropriate Uniform Contract Format (UCF) section headings from the applicable solicitation or contract. The UCF table of contents, however, shall not be set forth in this document.

Indicate the impact of the modification on the overall total contract price by inserting one of the following entries:

(i) Total contract price increased by $

(ii) Total contract price decreased by $

(iii) Total contract price unchanged.

State reason for modification.

When removing, reinstating, or adding funds, identify the contract items and accounting classifications.

(g)

(h)

When the SF 30 is used to reflect a determination by the contracting officer of the amount due in settlement of a contract terminated for the convenience of the Government, the entry in Item 14 of the modification may be limited to --

(i) A reference to the letter determination; and

(ii) A statement of the net amount determined to be due in settlement of the contract.

(1)

(2)

(3)

(4)

(5)

(6)

STANDARD FORM 30 (REV. 11/2016) BACK

(1) Accounting classification Net increase $

Amendment 0003 - Solicitation 47PF0024R0059

Amendment 0003 is being issued in order to make the following changes to Solicitation 47PF0024R0059 for Custodial and Related Services at the DuPage Airport Immigrations and Customs Enforcement (ICE) Hangar:

1. Incorporates Provision 52.223-1 Biobased Product Certification into the solicitation - the provision in its full text is attached below.

2. Incorporates Clause 52.223-2 Reporting of Biobased Products Under Service and Construction Contracts - the clause in its full text is attached below.

3. As a result of the incorporation of Provision 52.223-1 and Clause 52.223-2 additional requirements are being added to section C. Description/Specifications/Statement of Work. The additional language is attached below.

4. As a result of these changes the solicitation is hereby reopened, and the due date for proposals is extended to July 19, 2024 at 1:00 PM Central Time

All other terms and conditions remain unchanged.

52.223-1 Biobased Product Certification

B IOBASED P RODUCT C ERTIFICATION (M AY 2024)

As required by the Farm Security and Rural Investment Act of 2002 ( 7 U.S.C. 8101(4) ) and the Energy Policy Act of 2005 ( 7 U.S.C. 8102(a)(2)(F) ), the offeror certifies, by signing this offer, that biobased products (within categories of products listed by the United States Department of Agriculture in 7 CFR part 3201, subpart B ) to be used or delivered in the performance of the contract, other than biobased products that are not purchased by the offeror as a direct result of this contract, will comply with the applicable specifications or other contractual requirements.

(End of provision)

52.223-2 Reporting of Biobased Products Under Service and Construction Contracts

R EPORTING OF B IOBASED P RODUCTS U NDER S ERVICE AND C ONSTRUCTION C ONTRACTS (M AY 2024)

(a) Definitions. As used in this clause—

Biobased product means a product determined by the U.S. Department of Agriculture (USDA) to be a commercial product or industrial product (other than food or feed) that is composed, in whole or in significant part, of biological products, including renewable domestic agricultural materials and forestry materials, or that is an intermediate ingredient or feedstock. The term includes, with respect to forestry materials, forest products that meet biobased content requirements, notwithstanding the market share the product holds, the age of the product, or whether the market for the product is new or emerging. ( 7

U.S.C. 8101 ) ( 7 CFR 3201.2 ).

USDA-designated product category means a generic grouping of products that are or can be made with biobased materials—

(1) That are listed by USDA in a procurement guideline ( 7 CFR part 3201, subpart B ); and

(2) For which USDA has provided purchasing recommendations (available at https://www.biopreferred.gov ).

(b) The Contractor shall report to https://www.sam.gov , with a copy to the Contracting Officer, on the product types and dollar value of any biobased products in USDA-designated product categories purchased by the Contractor during the previous Government fiscal year, between October 1 and September 30; and

(c) Submit this report no later than—

(1) October 31 of each year during contract performance; and

(2) At the end of contract performance.

(End of clause) https://www.govinfo.gov/link/uscode/7/8101 https://www.govinfo.gov/link/uscode/7/8102 https://www.ecfr.gov/current/title-7/part-3201/subpart-B https://www.ecfr.gov/current/title-7/part-3201/subpart-B https://www.govinfo.gov/link/uscode/7/8101 https://www.govinfo.gov/link/uscode/7/8101 https://www.ecfr.gov/current/title-7/section-3201.2 https://www.ecfr.gov/current/title-7/part-3201/subpart-B https://www.biopreferred.gov/ https://www.sam.gov/

ADDITIONAL LANGUAGE FOR SECTION C. DESCRIPTION/SPECIFICATIONS/STATEMENT OF

WORK

C.2.1 Sustainable Cleaning

The Contractor is required to conduct custodial and related services utilizing industry best practices and guiding principles to minimize the Government’s environmental footprint.

The Contractor and their personnel shall employ practices and use products and equipment that are energy-efficient, water-efficient, minimize material resource use, and optimize indoor air quality.

C.2.2 Sustainable Purchasing

The Contractor shall use safe and environmentally friendly products as referenced throughout this specification. This specification requires the Contractor to routinely wipe down all solid, high-touch (frequently touched) surfaces with cleaning products containing soap or detergent that meet the sustainable product standards herein in Section C.2.3 and C.2.4. This requirement is compliant with guidance issued by Centers for Disease Control and Prevention (CDC). When disinfectant products are used they must be Environmental Protection Agency(EPA)-registered products or another product containing the same active ingredient(s) at the same or greater concentration. The Contractor must use the product in accordance with directions provided by the manufacturer. The Contractor must wear disposable gloves (e.g., latex or nitrile), facemasks (if applicable) and any additional required personal protective equipment as recommended by the manufacturer when cleaning. The Contractor shall select and track cleaning product and materials purchases as described herein.

C.2.3 Sustainable Product Requirements

Cleaners and hand soaps provided by the Contractor under this contract must be USDA BioPreferred® certified. In addition, they must be certified to one of the following ecolabels in order to ensure they contain no intentionally-added per- and polyfluoroalkyl substances (PFAS):

EPA Safer Choice

Green Seal® GS-37

Green Seal® GS-41

Green Seal® GS-53

Bathroom tissue and paper towels must meet EPA’s Comprehensive Procurement Guideline’s (CPG’s) minimum post-consumer recycled content percentage (20% for bathroom tissue and 40% for paper towels) or be Green Seal® or ECOLOGO® certified.

https://www.epa.gov/saferchoice/safer-choice-standard https://greenseal.org/standards/gs-37-cleaning-products-for-industrial-and-institutional-use/ https://greenseal.org/standards/gs-41-hand-cleaners-and-hand-sanitizers-for-industrial-and-institutional-use/ https://greenseal.org/standards/gs-53-specialty-cleaning-products-for-industrial-and-institutional-use/

Plastic trash bags must be EcoLogo/UL 126 or Biodegradable Products Institute (BPI) certified.

C.2.4 Proof of Compliance

15 days prior to the start of Contract performance, the Contractor shall submit to the CO or their designee a product list and, for each product, proof of compliance with the sustainable product requirements.

Contractors may show proof of compliance by providing an ecolabel compliance certificate, a screenshot of a product description showing compliance, or other method deemed acceptable by the Government

C.2.5 Sustainable Cleaning Plan

The Contractor shall submit a sustainable cleaning plan that sets forth the procedures, products and equipment that will be used to reduce the exposure of building occupants and maintenance personnel to potentially hazardous chemical, biological and particulate contaminants. The plan shall include building-specific standards that will apply to dusting, dust mopping, dry floor cleaning, chemical handling and tracking, cleaning equipment and associated planned maintenance. Plan shall also describe how hard floor and carpet maintenance will minimize chemical use; practices for cleaning entryways; practices for the handling and storage of cleaning chemicals to minimize spills, leaks, and other mismanagement;

practices related to the use of chemical concentrates and dilutions systems; personnel training; and sustainable cleaning quality control processes. The Sustainable Cleaning Plan is due to the CO or their designee within 15 calendar days before the start of the Contract .

The Contractor shall also ensure that: (a) Vacuum cleaners meet the Carpet and Rug Institute (CRI) Seal of Approval https://carpet-rug.org/testing/seal-of-approval-program/certified-vacuums/ . (b) Chemical concentrates that require dilutions are used whenever possible as compared to ready-to-use products.

Dilution control equipment should be utilized to ensure correct dilutions of concentrates and to protect workers from exposure to concentrated chemicals. Dilution control equipment shall have backflow prevention protection. The Mixing of corrosive chemicals requires the Contractor to provide an eyewash station that meets the ANSI Z258.1 standard. If eyewash stations are present, the Contractor shall use such existing equipment, but is responsible for bringing it into conformity with all OSHA requirements.

https://carpet-rug.org/testing/seal-of-approval-program/certified-vacuums/