4052323306Pricing.xlsx
XLSX spreadsheet 157 KB Posted
- Attached to
- Buses, Transit - Adult Passenger (Statewide)
- Contract number
- Not on record
- Issued by
- New York
About this file
This document is a pricing attachment for Group 40523-23306, a state and local contract vehicle for transit buses. The contract involves multiple awarded contractors including Coach & Equipment Bus Sales Inc and Model 1 Commercial Vehicles Inc, with associated contract numbers PC70594, PC70593, PC70592, and PC70595. The document was revised on December 16, 2025, and establishes the framework for providing transit buses and optional equipment to authorized jurisdictions.
The contract is structured around twelve lots (Lots A through K) for adult passenger transit buses, with some lots designated for electric vehicles (Lots B-EV and H-EV). Contractors are required to offer awarded transit bus models and associated optional equipment at the base item unit prices and optional equipment unit prices specified in the contract price list. The document references minimum specifications set forth in Contract Section 2.1 Transit Bus Requirements, with awarded models including low-floor vehicles. Several lots received no awards, and the pricing structure establishes fixed unit prices for both base transit bus configurations and supplemental optional equipment available to purchasing entities under this cooperative contract vehicle.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4052323306p.pdf | ||
| 4052323306ExtensionofUse.docx | DOCX document | |
| 4052323306ContractUsage.xlsx | XLSX spreadsheet | |
| 4052323306HowtoUse.pdf | ||
| 4052323306ra.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Summary
| GROUP 40523-23306, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Specifications and Pricing | |
| Revised: | December 16, 2025 | |
| Group 40523-23306, BUSES, TRANSIT (Adult Passenger) |
ATTACHMENT 1: SPECIFICATIONS AND PRICING
A summary of the Lots and awarded Transist Buses is on this page. The following pages include specifications for the awarded Transit Buses and associated Optional Equipment, which are supplemental to the minimum specifications set forth in Contract Section 2.1 Transit Bus Requirements. The Contractors shall offer the Transit Buses and associated Optional Equipment awarded for each Lot at the Base Item Unit Prices and Optional Equipment Unit Prices set forth in this contract price list.
| LOT A | LOT B | LOT B-EV | LOT C | LOT D | LOT E | LOT F | LOT G | LOT H-EV | LOT I | LOT J | LOT K | ||
| Contractor | Matthews Bus Alliance Inc | No Award | Fenton Mobility Products Inc | No Award | Coach & Equipment Bus Sales Inc | Coach & Equipment Bus Sales Inc | Model 1 Commercial Vehicles Inc | Coach & Equipment Bus Sales Inc | No Award | Model 1 Commercial Vehicles Inc | Model 1 Commercial Vehicles Inc | Model 1 Commercial Vehicles Inc | |
| Contract # | PC70594 | No Award | PC70593 | No Award | PC70592 | PC70592 | PC70595 | PC70592 | No Award | PC70595 | PC70595 | PC70595 | |
| Lot/Item Description | Low Floor Vehicle <10,000 lb. | High Headroom Wagon <10,000 lb. | Medium Headroom Wagon <10,000 lb. | ||||||||||
| (Electric) | High Headroom Wagon <10,000 lb. (Flexible Floor Plan) | Dual Rear Wheel Cutaway <22 ft. | Dual Rear Wheel Cutaway <22 ft. | Low Floor Cutaway | Dual Rear Wheel Cutaway >22 ft. | Dual Rear Wheel Cutaway >22 ft. (Electric) | Medium Duty |
Cutaway
| (Alternate Fuels) | Conventional Style | Conventional Style | |||||||||||
| Minimum Passenger Capacity | |||||||||||||
| [Adult (A) plus Wheelchairs (WC)] | 6 Passenger | ||||||||||||
| [5A/1WC] | 7 Passenger | ||||||||||||
| [Minimum 5A/1WC] | 7 Passenger | ||||||||||||
| [Minimum 5A/1WC] | 7 Passenger | ||||||||||||
| [6A/1WC] | 9 Passenger | ||||||||||||
| [8A/1WC] | 11 Passenger [10A/1WC] | 17 Passenger [15A/2WC] | 16 Passenger [14A/2WC] | 16 Passenger [14A/2WC] | 20 Passenger [18A/2WC] | 24 Passenger [22A/2WC] | 28 Passenger [26A/2WC] | ||||||
| Chassis Model Year | 2024 | Lot B has been Terminated for Convenience effective December 16, 2025. | 2025 | Lot C has been Terminated for Convenience effective December 16, 2025. | 2026 | 2026 | 2025 | 2026 | No Award | 2025 | 2026 | 2026 | |
| Chassis Make | Chrysler | Ford | Ford | Ford | Chevrolet | FORD | No Award | Ford | Freightliner | Freightliner | |||
| Chassis Model | Voyager | Transit | E350 | E350 | G-Series Cutaway | E450 | No Award | F-550 | S2C | S2C | |||
| Chassis Model Code | LX | W9C | E3F | E3F | 4500 | E4F | No Award | N/A | N/A | N/A | |||
| Body Model Year | 2024 | 2024 | 2026 | 2026 | 2025 | 2026 | No Award | 2025 | 2025 | 2025 | |||
| Body Make | Braunability | Fenton | Coach & Equipment | Coach & Equipment | Arboc | Coach and Equipment | No Award | Champion | Champion | Champion | |||
| Body Model | Entervan | Fenton | Phoenix | Phoenix | Spirit of Freedom | Phoenix | No Award | Defender | Defender | Defender | |||
| Body Model Code | Simple Stow In-Floor Manual Ramp | Fenton | N/A | N/A | SOF 26 | N/A | No Award | 30-1019 | 32-2599 | 36-2599 | |||
| Base Item Unit Price | $78,692.52 | $84,816.92 | $95,380.00 | $98,492.40 | $220,922.17 | $105,922.00 | No Award | $172,405.88 | $206,965.56 | $213,798.79 |
| chk | $79,007.29 | $0.00 | $85,156.18 | $0.00 | $95,761.52 | $98,886.37 | $221,805.86 | $106,345.69 | No Award | $173,095.50 | $207,793.43 | $214,653.98 |
| dbl chk | $78,692.52 | $75,306.02 | $84,816.92 | $77,314.02 | $95,380.00 | $98,492.40 | $220,922.17 | $105,922.00 | No Award | $172,405.88 | $206,965.56 | $213,798.79 |
LOT A
| GROUP 40523-23306, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Specifications and Pricing | |
| December 16, 2025 | ||
| Contractor: | Matthews Bus Alliance Inc | |
| LOT A | ||
| Low Floor Vehicle<10,000 lb., 6 Passenger [Minimum 5A/1WC] |
| PART 1: Product Information for the Base Item Awarded | ||
| Chassis Model Year | Model Year of the Chassis | 2024 |
| Chassis Make | Make of the Chassis | Chrysler |
| Chassis Model | Model name of the Chassis | Voyager |
| Chassis Model Code | Model Code of the Chassis, if applicable | LX |
| Body Model Year | Model Year or Current Production Year of the Body | 2024 |
| Body Make | Make of the Body | Braunability |
| Body Model | Model of the Body | Entervan |
| Body Model Code | Model Code of the Body, if applicable | Simple Stow In-Floor Manual Ramp |
| PART 2: Base Item Unit Price | ||
| Base Item Unit Price | The per unit NYS Contract Price (dollar amount) for the Transit Bus described in the Base Item Specifications. The Base Item Unit Price includes any OEM fees, all customs duties and charges, all Transit Bus preparation and clean-up charges, NYS DMV and NYS DOT inspection, installation charges, delivery and all other incidentals normally included with providing a Transit Bus, but excludes Optional Equipment. | $78,692.52 |
| PART 3: Base Item Specifications | ||||
| The terms and conditions in Contract Section 2.1 Transit Bus Requirements shall be considered minimum requirements for the Transit Bus provided by the Contractor. Supplemental required specifications for the Transit Buses awarded for this Lot are listed below. The actual Transit Bus awarded may exceed the minimum specifications listed below. | ||||
| Category | Specification | Information Provided in Column D | Spec for Equipment Provided | |
| General | Capacity: Minimum (5) adult passenger seats, with one (1) wheelchair station | Capacity: | 5A + 1 WC | |
| General | Floor plan matches "Figures" tab. The floor plan shall provide a minimum of 27.5" hip-to-knee for all seated positions. | Manufacturer Floor Plan #: | Simple Stow 5A1WC | |
| General | Drive configuration: Low floor Converted Van or MPV | |||
| General | Have completed federal STURAA (Altoona) bus testing of not less than four (4) years/100,000 miles or have been certified as exempt as specified under FTA provisions. | |||
| General | Shall be manufactured and classified as a passenger vehicle. | |||
| General | GVWR: 5,000 lb. minimum. The OEM’s original rating and no other rating for the GVWR shall be used. | GVWR [lb.]: | 6055 | |
| General | Wheelbase: 121" (plus or minus 5”) | Wheelbase [inches]: | 121.6 | |
| General | Minimum 58” continuous passenger aisle headroom | Headroom [inches]: | 60 | |
| General | Shall include an “Electronic Stability Control" system that improves stability by detecting and reducing loss of traction. | |||
| Chassis (see specifications below) | ||||
| Engine | Minimum 3.0 liter gasoline engine rated minimum 250 HP x 250 lb. ft. torque. | Number of Cylinders: | 6 | |
| Liters: | 3.6 | |||
| Horsepower and Torque: | 287 HP/267 TQ | |||
| Engine | Ready access to engine compartment is required for servicing and routine maintenance of engine and engine components. | |||
| Fuel Tank | Nominal (plus or minus 5 gallons) 20-gallon tank | Tank Size [Gallons]: | 19 | |
| Cooling System | Chassis manufacturers heaviest duty cooling system available for Chassis supplied and protected to minus 30°F | |||
| Electrical | Minimum 150 amp OEM alternator | Alternator Capacity [amps]: | 180 | |
| Electrical | Minimum 650 CCA battery which shall have protective rubber jacket at connection terminals (pigmented red to indicate positive and black to indicate negative). | Rating of Batteries [at 0°F]: | 650 | |
| CCA each battery: | 650 | |||
| Minutes RC: | 120 | |||
| Electrical | Manufacturer’s standard dash-mounted gauges (not lights) | |||
| Transmission | OEM supplied automatic transmission | Transmission Model #: | 9-Speed 948TE Automatic | |
| Front Axle | Minimum Front Gross Axle Weight Rating (FGAWR) 2,500 lb. | FGAWR [lb.]: | 3100 | |
| Rear Axle | Minimum Rear Gross Axle Weight Rating (RGAWR) 2,750 lb. | RGAWR [lb.]: | 2955 | |
| Suspension | Chassis manufacturer’s heaviest duty suspension system (front and rear) available for GVWR specified. | |||
| Suspension | OEM supplied | Front Spring Rating [lb.]: | 3100 | |
| Rear Spring Rating [lb.]: | 2955 | |||
| Shock Absorbers | Heavy Duty | Make and Model #: | Chrysler OEM | |
| Brakes | ABS power brakes meeting FMVSS 135. | Service Brakes [total lining or sweep area] both front & rear: | Front 13.0 x 1.1 / Rear 13.0 x 0.47 | |
| Parking Brake | OEM supplied foot-operated or electronic parking brake | |||
| Tires/Rims | OEM supplied all-season radial tread or rib tread w/mud and snow rear, as required to meet the GVWR specified. A matching full size spare tire and rim shall be included. | Radial Tires [size]: | 235/65R17 | |
| Radial Tires [load]: | 1984 | |||
| Radial Tires [range]: | H | |||
| Radial Tires [manufacturer]: | Yokohama | |||
| Front Tires [tread design]: | All Season Radial | |||
| Front Tires [capacity/tire]: | 1984 | |||
| Rear Tires [tread design]: | All Season Radial | |||
| Rear Tires [capacity/tire]: | 1984 | |||
| Front Bumper | Front bumper may be OEM chrome or high density rubber/plastic and affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Front Bumper [material]: | Composite | |
| Front Bumper [manufacturer]: | Chrysler OEM | |||
| Rear Bumper | Rear bumper shall be OEM Chassis supplied carbon or high density rubber/plastic and shall be affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Rear Bumper [material]: | Composite | |
| Rear Bumper [manufacturer]: | Chrysler OEM | |||
| License Plates | Provisions shall be made for the mounting of standard U.S. license plates on the front and rear of the Transit Bus and shall comply with SAE J686. | |||
| Steering | Power steering with adjustable steering wheel | Turning Diameter [at end of front bumper]: | 39.7 Feet | |
| Interior Equipment | OEM dash air conditioning, defroster, and heating system | |||
| Interior Equipment | OEM rear view camera | |||
| Radio | Chassis Manufacturer's standard AM/FM Digital Clock Radio, with four (4) cabin speakers. | Manufacturer: | Chrysler OEM | |
| Model #: | Uconnect 5 | |||
| Exterior Equipment | OEM cruise control | |||
| Exterior Equipment | Standard OEM horn(s) | |||
| Head Lights | OEM standard includes daytime running headlights | |||
| Exterior Equipment | Reflectors | |||
| Exterior Equipment | Exhaust system shall meet current USEPA emission requirements. | |||
| Miscellaneous | Minimum two (2) OEM keys or fobs | |||
| Body (see specifications below) | ||||
| Driver/Front Passenger Doors | Standard Factory OEM equipment | |||
| Rear Passenger Doors | Manually operated or power sliding single left and right side mounted doors with a minimum of 56" clear height entry (no steps). | Entry Height [inches]: | 56.75 at Center of Door, 56 at Air Bag | |
| Doors/Windows | OEM power windows and power locks | |||
| Body Structure | Certification of compliance with all FMVSS for passenger vehicles under 10,000 lb., plus documentation consisting of detailed explanation and dimensional drawing supporting the Body structures shall be supplied with bid submission. | Exterior Siding [material/thickness]: | Aluminized Steel OEM | |
| Interior Paneling [material/thickness]: | Various OEM | |||
| Insulation | ||||
| [material/R Value]: | OEM Doors N/A | |||
| Exterior Equipment | Reverse alarm | |||
| Exterior Lighting (Brake; Turn Signal; Clearance; Back Up; Tail; License Plate) | All exterior Body lights must meet current SAE standards and be armored (or low-profile design or sufficiently Body-recessed) to provide protection from impact of branches, etc. Rear brake lights include a third light installed over the rear emergency door. | |||
| Exterior Mirrors | Driver's side and curbside exterior mirrors shall be remote controlled. Each mirror head shall be constructed of high impact ABS and include a flat and convex feature. | Manufacturer: | Chrysler OEM | |
| Model #: | LX Pacifica OEM | |||
| Interior Mirror | OEM rear view mirror shall be provided | |||
| Windows | OEM supplied. Rear window shall include a defogger/defroster with wiper/washer | |||
| Floor Covering Material | Shall be a durable nonskid transit type flooring. The floor covering shall be butt jointed and cemented to the floor with a waterproof adhesive. Mobility aid restraint tracks and seat locks shall be beveled, with no sharp edges. | |||
| Passenger Entry | Shall be a low height and comply with ADA 1192. (no entry steps) | Top of floor above ground [inches]: | 12.5 | |
| Passenger Access Door(s) | Door(s) shall comply with FMVSS 217. A passenger entry door located on the curbside (right side of vehicle) shall be wheelchair accessible. All items, including lighting, handrails, and interlock shall be in compliance with ADA and FMVSS 403 & 404. | Entrance Door clear opening [inches]: | 31.5 | |
| Interior | Material and treatments shall be flame retardant to meet FMVSS 302. Side panel and ceiling shall be finished with matching trim and color, and have smooth finishes without any unprotected sharp edges. | |||
| Insulation | Fiberglass, resin-hardened-honeycomb (FRP) material, polyurethane, or closed cell EPS foam insulation in walls and ceiling (minimum R-value of R-6). | |||
| Ramp | The ramp shall meet the requirements of Part 38 of the ADA relating to vehicle ramps. A manual or power stow-in floor design shall include a stow/deploy handle for normal operations. Ramp shall deploy from the main passenger entry opening and be protected from moisture and debris from underside and sufficiently insulated to protect interior noise level. The ramp shall be of aluminum or stainless steel construction. The ramp must have a fail safe system that allows stowing if the ramp fails. | Manufacturer: | Braunability | |
| Model #: | Simple Stow Manual |
| Ramp Slope | Maximum ratio of 1:4 slope when ramp is deployed to sidewalk or roadway. | ||
| Interlock | An OEM or aftermarket interlock system shall be supplied that conforms with ADA requirements and FMVSS 403 and 404. A manual override system in case of power failure shall also be provided. The electric system shall be protected with fuse or circuit breaker. Labeled dash mounted visual alarm to indicate special service door is not fully closed, shall be provided. | ||
| ADA Compliance | All features required for a demand-response application shall be included in accordance with 49 CFR Subtitle A Subpart B (excluding paragraphs 38.33 Fare box, 38.35 Public information system, 38.37 Stop request, and 38.39 Destination and route signs). | ||
| Lighting- Driver Dome Light | OEM supplied. | ||
| Lighting (Interior) | OEM supplied and meet ADA requirements. | ||
| Heater | Sufficient BTU capacity heater shall be provided to attain a 50°F temperature rise from a mean ambient winter temperature of 21°F. | ||
| Model #: | |||
| Air Conditioning | OEM Chassis supplied, for cooling and moisture removal from the windshield and drivers area. The system shall consist of one evaporator installed in the front area with integral dash outlets and with rear outlet designed to direct the air throughout the Transit Bus. | Manufacturer: | Chrysler OEM |
| Model #: | OEM AC | ||
| A/C Capacity [Body BTUH]: | OEM Appx 20,000 | ||
| A/C Airflow [Body CFM]: | OEM Appx 600 | ||
| Driver Seat | Driver's seat shall be high back; fully adjustable (vertically and horizontally with electric power seat pedestal); include lumbar support; suspension seating (minimally spring suspension); foam padded; fabric upholstered; w/retractable 3-point lap/shoulder seat belt (in compliance with FMVSS 209 & 210). Seat color shall complement interior seating color. | Manufacturer: | Chrysler OEM |
| Model #: | LX Pacifica OEM |
| Front Passenger Seat | Co-pilot (front passenger) seat shall be OEM with removable "Step and Roll" seat base. | ||
| Seating | Upholstered transit type seats for a minimum of five (5) adult passengers. See specifications below and floor plan attached (Figures). | ||
| Seating | Seat assemblies and components of identical seats shall be mechanically interchangeable. | ||
| Seating | OEM supplied mid-high back bench adult passenger seat shall be supplied. All passenger seats shall be of durable vinyl or Compatible Equivalent type materials that can be cleaned easily, and fully padded for occupant comfort and retention. | Manufacturer: | Chrysler OEM |
| Model #: | LX Pacifica OEM |
| Seating | An approved retractable style integrated 3-point lap and shoulder seat belt shall be provided for each seating space and shall be in compliance with FMVSS 209 & 210. Belt retractors must not interfere with seating space, and two (2) seat belt extensions shall be provided with each Transit Bus. | ||
| Seating | A second Row 2-passenger bench seat shall be installed behind driver. Bench seat shall match OEM interior colors. | ||
| Wheelchair & Wheelchair Occupant Restraints | One (1) Wheelchair Restraint System (Wheelchair and Wheelchair Occupant) shall be provided and installed and designed for "L" track systems. Occupant restraint system (including lap belt, shoulder belt with height adjustment, floor inserts, retractable wheelchair restraint/tie-downs, and restraint mounting hardware) meeting the required 30" wide x 48" long ADA envelope (or amendments thereto) adjacent to lift at rear of Transit Bus and ADA wheelchair space maneuvering clearances (or any amendments thereto). Wheelchair restraint/tie-downs (retractable), lap belt, and shoulder belt with height adjustment shall be in compliance with FMVSS 209 210, shall be forward facing, and shall be a Q-Straint Q-10007 or Sur-Lok AL812S-4C, or Compatible Equivalents. Individual storage pouch shall be provided to completely secure belts/straps on Transit Bus sidewalls when not in use. All items shall be installed in accordance with manufacturer’s standards and be in compliance with ADA, SAE Standard J2249, ANSI/RESNA WC-18, and ISO Standard 10542. Instructions on use of the wheelchair restraint system shall be affixed to the Transit Bus interior at a minimum of one (1) restraint position. | Manufacturer: | Q Straint |
| Model #: | QRT 360 Q10007 |
| Miscellaneous | Fire Extinguisher (2.5 lb. U/L or Factory Mutual Laboratories approved), First Aid Kit (10 unit), ICC Reflectors, Fire Blanket (bagged and mounted), and a Seat Belt Cutter shall be provided. Items shall be located in a readily accessible location to the driver (seat belt cutter must be accessible while driver is in belted driver’s seat position) in the front entry area of the Transit Bus. Equipment location shall be clearly identified. | ||
| Equipment Warranty | All equipment furnished under this contract (unless otherwise noted) must have a minimum warranty period of one (1) year regardless of mileage. | ||
| Chassis Warranty | Minimum of three (3) years, 36,000 miles | Chassis Warranty [years]: | 3 |
| Chassis Warranty [miles]: | 36000 | ||
| Body Warranty | Covering the integrity of the Transit Bus Body internal steel frame structure (including corrosion damage) and/or fatigue failure for a period of four (4) years or 100,000 miles. | Body Warranty [years]: | 5 |
| Body Warranty [miles]: | 100000 | ||
| Air Conditioning Warranty | The cabin air conditioning system shall be supported by a two (2) year, unlimited mileage warranty. | Air Conditioning Warranty [years]: | 2 Year/Unlimited Mileage |
| Wheelchair Ramp Warranty | The ramp shall be fully guaranteed by the manufacturer for three (3) years (with no mileage or hour limits) and any in-warranty service required shall be performed without charge to using agency. |
| PART 4: Optional Equipment Specifications and Pricing | ||||
| An Authorized User may choose one (1) or more of the Optional Equipment from the list of below, for the Transit Bus awarded for the Lot. The Contractor shall be required to honor all such requests, provided that adding the requested combination of Optional Equipment results in a Transit Bus that meets the minimum specifications stated in Contract Section 2.1 Transit Bus Requirements. See Section 4.4 Optional Equipment Unit Price for pricing information relative to Optional Equipment. | ||||
| Optional Equipment | Specification | Information Provided in Column D | Spec for Equipment Provided | Optional Equipment Unit Price |
| Camera Security System- 4 monitor | Provide and install a complete camera recording system, including software kit. Components include an eight (8) channel DVR capable of vertical or horizontal installation, plus simultaneous video recording for all camera heads. DVR shall be "user" programmable to record a minimum of five (5) Transit Bus functions (signals) such as brake lights, turn signal, wheelchair lift, etc. A driver trip feature shall also be included. Camera heads to include a minimum of two (2) exterior heads @ 600 TV lines resolution, with infrared feature and no audio, plus two (2) interior camera heads @ 600 TV lines resolution, with infrared and audio. Install kit shall be universal for one (1) or more Transit Buses with matching camera system. Minimum components include software, mouse, 5-6" monitor (or DVR viewing software), HDD USB docking station, HDD adapter, and BNC F-RCA adapter. A compatible system is acceptable provided all functionality is maintained. | Manufacturer and Model # of DVR: | AngelTrax Vulcan Series V862HC | $3,390.51 |
| Manufacturer and Model # of interior camera head: | AngelTrax HD1700V and HD2500WS | |||
| Manufacturer and Model # of exterior camera head: | AngelTrax HD3600V Vulcan Series 3600 HD Low Profile Camera IP68 Weather Resistant Low Profile Camera |
LOT B
| GROUP 40523-23306, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Specifications and Pricing | |
| December 16, 2025 | ||
| Contractor: | Fenton Mobility Products Inc | |
| LOT B | ||
| High Headroom Wagon <10,000 lb., 7 Passenger [Minimum 5A/1WC] |
| PART 1: Product Information for the Base Item Awarded | ||
| Chassis Model Year | Model Year of the Chassis | 2024-2025 |
| Chassis Make | Make of the Chassis | Ford |
| Chassis Model | Model name of the Chassis | Transit |
| Chassis Model Code | Model Code of the Chassis, if applicable | X2X |
| Body Model Year | Model Year or Current Production Year of the Body | 2024 |
| Body Make | Make of the Body | Fenton |
| Body Model | Model of the Body | Fenton |
| Body Model Code | Model Code of the Body, if applicable | Fenton |
| PART 2: Base Item Unit Price | ||
| Base Item Unit Price | The per unit NYS Contract Price (dollar amount) for the Transit Bus described in the Base Item Specifications. The Base Item Unit Price includes any OEM fees, all customs duties and charges, all Transit Bus preparation and clean-up charges, NYS DMV and NYS DOT inspection, installation charges, delivery and all other incidentals normally included with providing a Transit Bus, but excludes Optional Equipment. | $75,306.02 |
| PART 3: Base Item Specifications | ||||
| The terms and conditions in Contract Section 2.1 Transit Bus Requirements shall be considered minimum requirements for the Transit Bus provided by the Contractor. Supplemental required specifications for the Transit Buses awarded for this Lot are listed below. The actual Transit Bus awarded may exceed the minimum specifications listed below. | ||||
| Category | Specification | Information Provided in Column D | Spec for Equipment Provided | |
| General | Capacity: Minimum five (5) adult passenger seats, plus one (1) wheelchair station. Note: Deploying the 2-passenger folding seat over the wheelchair station increases the passenger capacity of the vehicle to 7 adults. | Capacity: | 7 passenger | |
| General | Floor plan matches "Figures" tab. The floor plan shall provide a minimum of 27.5" hip-to-knee for all seated positions, with the wheelchair footprint a minimum of 50" x 30". | Manufacturer Floor Plan #: | Lot B | |
| General | Drive configuration: High Headroom Passenger Wagon or MPV | |||
| General | Have completed federal STURAA (Altoona) bus testing of not less than four (4) years/100,000 miles or have been certified as exempt as specified under FTA provisions. | |||
| General | Original "as built" vehicle shall be manufactured and classified as a passenger vehicle. | |||
| General | Shall be in compliance as defined as ambulettes under NYCRR Part 720-721 regulations | |||
| General | GVWR: 9,000 lb. minimum. The OEM’s original rating and no other rating for the GVWR shall be used. | GVWR [lb.]: | 9000 | |
| General | Wheelbase: 148" (plus or minus 3”) | Wheelbase [inches]: | 148 | |
| General | Minimum 75” continuous passenger aisle headroom | Headroom [inches]: | 75" | |
| General | Shall include an “Electronic Stability Control" system that improves stability by detecting and reducing loss of traction. | |||
| Chassis (see specifications below) | ||||
| Engine | Minimum 3.5 liter V6 gasoline engine rated minimum 250 HP x 250 lb. ft. torque. | Number of Cylinders: | 6 | |
| Liters: | 3.5 | |||
| Horsepower and Torque: | 275/260 | |||
| Engine | Ready access to engine compartment is required for servicing and routine maintenance of engine and engine components. | |||
| Fuel Tank | Nominal (plus or minus 2 gallons) 25-gallon tank | Tank Size [Gallons]: | 25.1 | |
| Cooling System | Chassis manufacturers heaviest duty cooling system available for Chassis supplied and protected to minus 30°F | |||
| Electrical | Heavy Duty OEM, minimum 220 amp, alternator | Alternator Capacity [amps]: | 250 | |
| Electrical | Dual Heavy Duty Batteries, minimum 1300 CCA total, which shall have protective rubber jacket at connection terminals (pigmented red to indicate positive and black to indicate negative); | Rating of Batteries [at 0°F]: | 70 amp-hr each | |
| CCA each battery: | 650 | |||
| Minutes RC: | 120 70 ah | |||
| Electrical | Manufacturer’s standard dash-mounted gauges (not lights) | |||
| Transmission | 10-speed automatic transmission | Transmission Model #: | Ford OEM | |
| Front Axle | OEM Front Gross Axle Weight Rating (FGAWR) | FGAWR [lb.]: | 4130 | |
| Rear Axle | OEM Rear Gross Axle Weight Rating (RGAWR) | RGAWR [lb.]: | 5780 | |
| Suspension | Chassis manufacturer’s heaviest duty suspension system (front and rear) available for GVWR specified. | |||
| Suspension | OEM supplied | Front Spring Rating [lb.]: | 2065 | |
| Rear Spring Rating [lb.]: | 2757.5 | |||
| Shock Absorbers | Heavy Duty | Make and Model #: | McPherson | |
| Brakes | ABS power brakes meeting FMVSS 49CFR571.105 | Service Brakes [total lining or sweep area] both front & rear: | 329.68 Front Sweep Area / 302 Rear Sweep Area 631.68 Total Sweep | |
| Parking Brake | Foot-or hand-operated parking brake | |||
| Tires/Rims | OEM supplied Steel Wheel with Full Silver Wheel Covers plus all-season radial tread or rib tread w/mud and snow rear, as required to meet the GVWR specified. A full size spare tire and rim shall be included. | Radial Tires [size]: | 235/65R16C 121/119 R BSW all-season | |
| Radial Tires [load]: | 3195 lbs | |||
| Radial Tires [range]: | E | |||
| Radial Tires [manufacturer]: | Continental | |||
| Front Tires [tread design]: | All Season Radial | |||
| Front Tires [capacity/tire]: | 3195 lbs | |||
| Rear Tires [tread design]: | All Season Radial | |||
| Rear Tires [capacity/tire]: | 3195 lbs | |||
| Front Bumper | Front bumper may be OEM chrome or high density rubber/plastic and affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Front Bumper [material]: | Plastic | |
| Front Bumper [manufacturer]: | Ford | |||
| Rear Bumper | Rear bumper shall be OEM Chassis supplied carbon or high density rubber/plastic and shall be affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Rear Bumper [material]: | Plastic | |
| Rear Bumper [manufacturer]: | Ford | |||
| License Plates | Provisions shall be made for the mounting of standard U.S. license plates on the front and rear of the Transit Bus and shall comply with SAE J686. | |||
| Steering | Power steering with adjustable steering wheel | Turning Diameter [at end of front bumper]: | 48' | |
| Interior Equipment | OEM dash air conditioning, defroster, and heating system | |||
| Interior Equipment | OEM rear view camera | |||
| Radio | Chassis Manufacturer's standard AM/FM Digital Clock Radio, with four (4) cabin speakers. | Manufacturer: | Ford | |
| Model #: | OEM | |||
| Exterior Equipment | OEM cruise control | |||
| Exterior Equipment | Standard OEM horn(s) | |||
| Head Lights | OEM standard includes daytime running headlights | |||
| Exterior Equipment | Reflectors | |||
| Exterior Equipment | Exhaust system shall meet current USEPA emission requirements. | |||
| Miscellaneous | Minimum two (2) OEM keys or fobs | |||
| Body (see specifications below) | ||||
| Driver/Front Passenger Doors | Standard Factory OEM equipment | |||
| Passenger/Lift Door | Power sliding curb side (right side) door with window. Minimum clear dimensions shall be 62" vertical and 50" horizontal | Dimensions [inches]: | 60" Vertical/50 Horizantal | |
| Windows | OEM supplied windows all around | |||
| Body Structure | Shall be a Unibody construction design. Provisions shall be made to ensure full side airbag deployment with all required specified equipment (wheelchair lift, barriers, etc.). Certification of compliance with all FMVSS for passenger vehicles under 10,000 lb., plus documentation consisting of detailed explanation and dimensional drawing supporting the Body structures shall be supplied with bid submission. | Exterior Siding [material/thickness]: | Steel .040 +/- .015 | |
| Interior Paneling [material/thickness]: | Plastic .125 +/- .050 | |||
| Insulation | ||||
| [material/R Value]: | Insulation OEM Ford | |||
| Drive Shaft Guard(s) | Metal Guard(s) in accordance with NYSDOT Title 17 720.4 (Y) (1) (h) | Drive Shaft Guards [quantity]: | 1 | |
| Exterior Equipment | Reverse alarm | |||
| Exterior Lighting (Brake; Turn Signal; Clearance; Back Up; Tail; License Plate) | All exterior Body lights must meet current SAE standards and be armored (or low-profile design or sufficiently Body-recessed) to provide protection from impact of branches, etc. Rear brake lights include a third light installed over the rear emergency door. | |||
| Mud Flaps (Front and Rear) | Shall be manufacturers standard. Labeling and advertising is prohibited, other than for necessary safety information | |||
| Exterior Mirrors | Driver's side and curbside exterior mirrors shall be heated and remote controlled. Each mirror head shall be constructed of high impact ABS and include a flat and convex feature. | Manufacturer: | Ford | |
| Model #: | OEM | |||
| Interior Mirror | OEM rear view mirror shall be provided | |||
| Floor Assembly | Shall be insulated and shall include a minimum 5/8” thick marine grade plywood, or 3/4" Advantech sub-floor, or Compatible Equivalent. A light colored (e.g. light gray), floor covering shall have a non-slip surface that remains effective in all weather conditions and meet FMVSS 302 and ADA requirements. | |||
| Floor Covering Material | Shall be a durable nonskid transit type flooring. | |||
| Entrance Step | Shall be a low height (lowest practical) running board, installed on the curb (right) side, continuous full length for entry assist at both the front of the sedan and side sliding doors. | Top of first step above ground [inches]: | 11"-12" | |
| Door Entry Grab Rails (right and left side) | If not OEM supplied, dual entry grab rails shall be installed on each side of the designated entry door, parallel to the steps. Handrails shall be securely fastened. A minimum 1 1/4" diameter, with a high visible yellow stainless steel powder coated material, or non-slip Compatible Equivalent shall be used. | |||
| Twin Rear Doors | OEM twin doors shall be located in the rear of the Transit Bus and when used as an emergency exit door, in compliance with FMVSS 571.217 and title 17 NYCRR Part 720.5 and 720.8 requirements. When the Transit Bus is designed such that the emergency door can be locked and not unlocked when the door latch is operated, then an interlock system must be installed to prevent the propulsion unit from starting, or after the Transit Bus is started, then an audible or visible alarm must be activated. If an interior locking device (vandal lock or equivalent) is provided for emergency exit door(s), then appropriate interlocking must be provided as indicated above. Each door shall include a window and a positive fastening device to hold door in the open position (“hold open” feature) when a rear wheelchair lift is installed. A reflective device for each door shall occupy at least fourteen (14) square inches and provide maximum visibility when the doors are open. | |||
| Padded Panels | Shall be provided, attached to a vertical and horizontal stanchions where appropriate. The gap between the floor and bottom of the panel shall be 5" (plus or minus .5") | |||
| Insulation | OEM supplied in walls and ceiling. | |||
| Wheelchair Lift Door | Wheelchair area opening height shall be a minimum of 56". All items, including lighting, shall be in compliance with ADA and FMVSS 403 & 404. | Opening Height [inches]: | 56" | |
| Wheelchair Lift | The wheelchair lift shall be a rear-mounted, automatic electric/hydraulic type (power-up, gravity down) using dual hydraulic cylinders. The hydraulic reservoir capacity shall be at least one (1) quart, with easy access for inspection and servicing. The maximum power draw shall not exceed 70 amps at 12 volts. Wheelchair lift unit shall be a Public Use Lift and shall be installed in accordance with manufacturer’s standards. The lift must have a fail safe system that allows stowing if any solenoid seizes. A manual method to raise and stow the lift shall be provided in the event of a power failure. | Manufacturer: | Braun | |
| Model #: | Centrury NCL 1,000 |
| Wheelchair Lift | Shall be capable of a minimum of 2500 cycle operation with a minimum of 1000 lb. lift capacity. | ||
| Wheelchair Lift | Platform size shall be minimum 34" x 54" (of useable space) and lift capacity shall be minimum 1,000 lb. Wheelchair lift platform shall be constructed of expanded metal grating with left and right side 2 1/2" high safety stops plus a spring loaded or power activated ADA front stop. A pendent type operating control with a cable length sufficient to allow operation of lift at outermost platform position shall be provided. Lift platform shall be automatic power fold/unfold design. | Platform Size [inches]: | 34"x54" |
| Wheelchair Lift | A transmission interlock system that utilizes intermittent fault filter technology shall be installed to prevent operation of the lift unless door(s) are opened and transmission is in park with parking brake applied. A manual override system in case of power failure shall also be provided. Lift electric system shall be protected with fuse or circuit breaker. | Manufacturer: | Intermotive |
| Model #: | ILIS |
| Wheelchair Lift | The spring load, deck end, stop shall be retracted while the lift deck is in the load/unload (down) position. This shall enable the operator to load the lift without holding the stop in its retracted position. | ||
| Wheelchair Lift | Two (2) folding handrails on lift platform shall be provided. Handrails shall not reduce platform size. | ||
| Wheelchair Lift | Labeled dash mounted visual alarm (in compliance with Chapter VI, Article III, Parts 720/721, NYCRR) to indicate special service door is not fully closed, shall be provided. | ||
| Wheelchair Lift Barrier | Protective panel shall be provided as needed to prevent shearing action between the lift platform and Transit Bus floor or door jams in conformance with Title 17 NYCRR Part 720.8(a)(3)(b). | ||
| ADA Compliance | All features required for a demand-response application shall be included in accordance with 49 CFR Subtitle A Subpart B (excluding paragraphs 38.33 Fare box, 38.35 Public information system, 38.37 Stop request, and 38.39 Destination and route signs). | ||
| Lighting- Driver Dome Light | OEM supplied | ||
| Lighting (Interior) | Overhead, entrance, step well, and lift lights shall provide no less than two (2) foot-candles of illumination on the entrance step tread, or lift or ramp platform with the door open. Outside light(s) shall provide at least one (1) foot-candle of illumination on the street surface with three (3) feet of step tread outer edge. This system shall provide illumination automatically when the door is open and meet ADA requirements. | ||
| Lighting (Interior) | Overhead entrance and step well lights shall be wired to and be automatically activated by a door controlled switch. Lights shall operate any time the ignition key is on and the door is opened. | ||
| Lighting (Interior) | Interior lighting shall provide a minimum of two (2) foot-candles of illumination at reading level. Interior lighting fixtures shall be reasonably flush with the interior walls and ceiling so no hazard exists for passengers. All interior lights shall be grounded by an in-harness ground attached in the fuse panel to a common grounding point. | ||
| Interior Trim and Padding | All interior panel joints shall be covered with matching trim strips or moldings and all sharp edges, protrusions, corners etc. shall be finished in such a manner to prevent possible injury. (If vacuum lamination is used, joints shall be securely bonded and provide a finished appearance). Any exposed wheelchair lift support brackets, air conditioner units or other similar items shall be padded to prevent injury. | ||
| Heater(s) | Sufficient BTU capacity of front and rear under seat heaters shall be provided to attain a 50°F temperature rise from a mean ambient winter temperature of 21°F. Interior temperature shall be uniform throughout passenger compartment area by the use of heat registers in the floor structure. | Manufacturer: | Ford |
| Model #: | OEM |
Air Conditioning Air conditioning system that shall be designed with sufficient BTU cooling capacity to provide a balanced cooling system capable of maintaining a 75°F inside temperature vs. an outside temperature 95°F and a relative humidity of 50%, with ability to continuously decrease temperature inside the Transit Bus (as measured from the approximate Transit Bus center) a minimum of 1°F for every ninety (90) seconds. (Air Conditioner Manufacturer’s Certification that performance requirement for Transit Bus type can be met must be submitted with bid).
| Air Conditioning | The cabin evaporator shall include directional and adjustable discharge ports. It shall be floor mounted toward the rear of the Transit Bus. Any sharp edges and/or exposed metal associated with the AC unit must have these edges/surfaces appropriately padded to provide for passenger protection. Aisle height requirements will be measured from a point directly in front of the AC unit. | ||
| Air Conditioning | Each air conditioning system shall use R134A refrigerant. All system components subject to corrosion from moisture shall be aluminum, copper, stainless steel, galvanized, or epoxy coated. All exterior exposed air conditioning electrical connections must utilize weather pac plugs or Compatible Equivalent. An air intake screen shall be installed on the skirt of the Transit Bus to ensure sufficient airflow through the skirt mounted condenser coil. All hoses shall be supported at a maximum of twenty-four (24) inch intervals by clamps. | ||
| Driver Seat | Driver's seat shall be high back; fully adjustable (vertically and horizontally with electric or air power seat pedestal); include lumbar support; suspension seating (minimally spring suspension); foam padded; fabric upholstered; w/retractable 3-point lap/shoulder seat belt (in compliance with FMVSS 209 & 210). Seat color shall complement interior seating color. | Manufacturer: | Ford |
| Model #: | OEM |
| Front Passenger Seat | Co-pilot (front passenger) seat shall be OEM supplied, matching driver seat (except vertical adjustment). | ||
| Seating | Upholstered transit type seats for a minimum of six (6) adult passengers. See specifications below and floor plan attached (Figures). | ||
| Seating | Seat assemblies and components of identical seats shall be mechanically interchangeable. | ||
| Seating | Seats aft of driver shall be mid-high back, adult passenger seats shall be supplied in individual passenger modules, Freedman model "GO Seat ES", or other Compatible Equivalent. All ambulatory seats shall be forward facing. Seat cushions per passenger shall be a minimum of 17” in width and 17” in depth, and seat back shall be a minimum of 24” in height, excluding the grab handle. All cushions and seat back covers shall have easily removable covers, replaceable without removing the seat from the Transit Bus. All seat cushions shall have identical upholstery and a spring suspension system. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. | Manufacturer: | Freedman |
| Model # (foldaway): | GO ES | ||
| Model # (single seat): | GO ES | ||
| Seating | Seats aft of driver shall include three (3) two-passenger foldaway seats. Freedman model "GO ES Space Saver" seat or other Compatible Equivalent. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. Minimum seat widths shall be 34” double seats. Aisle width shall be a minimum of 10”. | Single Seat Width [inches]: | 17" |
| Double Seat Width [inches]: | 34" | ||
| Minimum Aisle Width [inches]: | 10" | ||
| Seating | Entire seat frame, except mounting brackets, shall be enclosed in energy absorbing materials. Seat covers shall be transit grade vinyl, 36 oz. per linear yard (Cameo/Predictions), or Compatible Equivalent, or transit grade fabric produced from Marquesa Lana Yarns-Interweave, or Bus Textil Level 3, or Compatible Equivalent. All cover materials and seat foam must be encapsulated in Docket 90 compliant material. | ||
| Seating | An approved retractable style integrated 3-point lap and shoulder seat belt shall be provided for each seating space and shall be in compliance with FMVSS 209 & 210. Belt retractors must not interfere with seating space, and two (2) seat belt extensions shall be provided with each Transit Bus. | ||
| Seating | Molded Top Grab handles/grab rails shall be provided on seat backs of all seats and shall be mounted/welded to seat frame structure. | ||
| Wheelchair & Wheelchair Occupant Restraints | One (1) Wheelchair Restraint System (Wheelchair and Wheelchair Occupant) shall be provided and installed and designed for Authorized User choice of "L" track or "Slide 'N Click" securement systems. Occupant restraint system (including lap belt, shoulder belt with height adjustment, floor inserts, retractable wheelchair restraint/tie-downs, and restraint mounting hardware) meeting the required 30" wide x 48" long ADA envelope (or amendments thereto) adjacent to lift at rear of Transit Bus and ADA wheelchair space maneuvering clearances (or any amendments thereto). Wheelchair restraint/tie-downs (retractable), lap belt, and shoulder belt with height adjustment shall be in compliance with FMVSS 209 210, shall be forward facing, and shall be a Q-Straint Q-10007/10008 or Sur-Lok AL812S-4C/AL860S-4C-SNC, or Compatible Equivalents. Individual storage pouch shall be provided to completely secure belts/straps on Transit Bus sidewalls when not in use. All items shall be installed in accordance with manufacturer’s standards and be in compliance with ADA, SAE Standard J2249, ANSI/RESNA WC-18, and ISO Standard 10542. Instructions on use of the wheelchair restraint system shall be affixed to the Transit Bus interior at a minimum of one (1) restraint position. | Manufacturer: | Qstraint |
| Model #: | 10007 |
| Miscellaneous | Fire Extinguisher (2.5 lb. U/L or Factory Mutual Laboratories approved), First Aid Kit (10 unit), ICC Reflectors, Fire Blanket (bagged and mounted), and a Seat Belt Cutter shall be provided and shall be in compliance with FMVSS regulations and Title 17 NYCRR Part 720.7(a). Items shall be located in a readily accessible location to the driver (seat belt cutter must be accessible while driver is in belted driver’s seat position) in the front entry area of the Transit Bus. Equipment location shall be clearly identified. | ||
| Miscellaneous | OEM supplied storage shelf shall be provided over the windshield. | ||
| Equipment Warranty | All equipment furnished under this contract (unless otherwise noted) must have a minimum warranty period of one (1) year regardless of mileage. | ||
| Chassis Warranty | Minimum of three (3) years, 36,000 miles | Chassis Warranty [years]: | 3 |
| Chassis Warranty [miles]: | 36000 | ||
| Body Warranty | Covering the integrity of the Transit Bus Body internal steel frame structure (including corrosion damage) and/or fatigue failure for a period of four (4) years or 100,000 miles. | Body Warranty [years]: | 4 |
| Body Warranty [miles]: | 100000 | ||
| Air Conditioning Warranty | The cabin air conditioning system shall be supported by a two (2) year, unlimited mileage warranty. The Chassis OEM air conditioning system coverage falls under the Chassis warranty. | Air Conditioning Warranty [years]: | 3 |
| Wheelchair Lift Warranty | The lift shall be fully guaranteed by the manufacturer for twelve (12) months (with no mileage or hour limits) and any in-warranty service required shall be performed without charge to using agency. |
| PART 4: Optional Equipment Specifications and Pricing | ||||
| An Authorized User may choose one (1) or more of the Optional Equipment from the list of below, for the Transit Bus awarded for the Lot. The Contractor shall be required to honor all such requests, provided that adding the requested combination of Optional Equipment results in a Transit Bus that meets the minimum specifications stated in Contract Section 2.1 Transit Bus Requirements. See Section 4.4 Optional Equipment Unit Price for pricing information relative to Optional Equipment. | ||||
| Optional Equipment | Specification | Information Provided in Column D | Spec for Equipment Provided | Optional Equipment Unit Price |
| Wheelchair Lift, Side Mount Installation | In lieu of the standard rear-mounted wheelchair lift in the Base Item, supply and install a wheelchair lift in the OEM powered side sliding door, curb-side. Lift platform size shall be minimum 34" x 51" (of useable space) and lift capacity shall be a minimum of 800 lb. Wheelchair lift platform shall be constructed of expanded metal grating with left and right side 2 1/2" high safety stops plus a spring loaded or power activated ADA front stop. A pendent type operating control with a cable length sufficient to allow operation of lift at outermost platform position shall be provided. Lift platform shall be automatic power fold/unfold design, and capable of a minimum of 2500 cycle operation with a minimum of 800 lb. lift capacity. |
| A capacity reduction of no more than two passengers allowable with side lift option selection. | Manufacturer: | Braun | -$200.80 | |
| Model #: | NCL919 | |||
| Platform Size [inches]: | 34" x 51" | |||
| Lift Capacity [lb.]: | 800 | |||
| Cycle Operation: |
| Additional Wheelchair Restraint System | Price one (1) additional wheelchair station above the quantity required in the Base Item. Price is per position to include all belts, floor/shoulder hardware, and storage container. | $567.26 | ||
| Camera Security System- 6 monitor | Provide and install a complete camera recording system, including software kit. Components include an eight (8) channel DVR capable of vertical or horizontal installation, plus simultaneous video recording for all camera heads. DVR shall be "user" programmable to record a minimum of five (5) Transit Bus functions (signals) such as brake lights, turn signal, wheelchair lift, etc. A driver trip feature shall also be included. Camera heads to include a minimum of two (2) exterior heads @ 600 TV lines resolution, with infrared feature and no audio, plus four (4) interior camera heads @ 600 TV lines resolution, with infrared and audio. Install kit shall be universal for one (1) or more Transit Buses with matching camera system. Minimum components include software, mouse, 5-6" monitor (or DVR viewing software), HDD USB docking station, HDD adapter, and BNC F-RCA adapter. A compatible system is acceptable provided all functionality is maintained. | Manufacturer and Model # of DVR: | Angel Trax | $3,614.40 |
| Manufacturer and Model # of interior camera head: | HD Sereis | |||
| Manufacturer and Model # of exterior camera head: | HD Series |
LOT B-EV
| GROUP 40523-23306, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Specifications and Pricing | |
| December 16, 2025 | ||
| Contractor: | Fenton Mobility Products Inc | |
| LOT B - EV | ||
| Medium Headroom Electric MPV <10,000 lb., 7 Passenger [Minimum 5A/1WC] |
| PART 1: Product Information for the Base Item Awarded | ||
| Chassis Model Year | Model Year of the Chassis | 2025 |
| Chassis Make | Make of the Chassis | Ford |
| Chassis Model | Model name of the Chassis | Transit |
| Chassis Model Code | Model Code of the Chassis, if applicable | W9C |
| Body Model Year | Model Year or Current Production Year of the Body | 2024 |
| Body Make | Make of the Body | Fenton |
| Body Model | Model of the Body | Fenton |
| Body Model Code | Model Code of the Body, if applicable | Fenton |
| PART 2: Base Item Unit Price | ||
| Base Item Unit Price | The per unit NYS Contract Price (dollar amount) for the Transit Bus described in the Base Item Specifications. The Base Item Unit Price includes any OEM fees, all customs duties and charges, all Transit Bus preparation and clean-up charges, NYS DMV and NYS DOT inspection, installation charges, delivery and all other incidentals normally included with providing a Transit Bus, but excludes Optional Equipment. | $84,816.92 |
| PART 3: Base Item Specifications | |||
| The terms and conditions in Contract Section 2.1 Transit Bus Requirements shall be considered minimum requirements for the Transit Bus provided by the Contractor. Supplemental required specifications for the Transit Buses awarded for this Lot are listed below. The actual Transit Bus awarded may exceed the minimum specifications listed below. | |||
| Category | Specification | Information Provided in Column D | Spec for Equipment Provided |
| General | Capacity: Minimum five (5) adult passenger seats, plus one (1) wheelchair station. Note: Deploying the 2-passenger folding seat over the wheelchair station increases the passenger capacity of the vehicle to 7 adults. | Capacity: | 7 Passenger |
| General | Floor plan matches "Figures" tab. The floor plan shall provide a minimum of 27.5" hip-to-knee for all seated positions, with the wheelchair footprint a minimum of 50" x 30". | Manufacturer Floor Plan #: | Lot B-EV |
| General | Drive configuration: Medium Headroom Passenger Wagon or MPV | ||
| General | Have completed federal STURAA (Altoona) bus testing of not less than four (4) years/100,000 miles or have been certified as exempt as specified under FTA provisions. | ||
| General | Vehicle shall be a complete body and chassis, converted and classified as a passenger vehicle. | ||
| General | Shall be in compliance as defined as ambulettes under NYCRR Part 720-721 regulations | ||
| General | GVWR: 9,500 lb. minimum. The OEM’s original rating and no other rating for the GVWR shall be used. | GVWR [lb.]: | 9500 |
| General | Wheelbase: 148" (plus or minus 3”) | Wheelbase [inches]: | 148" |
| General | Minimum 67" continuous passenger aisle headroom | Headroom [inches]: | 67" |
| General | Shall include a “Roll Stability Control" system that improves stability by detecting and reducing loss of traction. | ||
| Chassis (see specifications below) | |||
| Model Year | 2025 Chassis production month and year August 2024 or later |
| Horsepower and Torque: | 266/317 | |||
| Motor | OEM Electric, targeting 198kW/266 peak power and 317lb.ft. torque | |||
| Front Hood | Ready access to Electronic Service Module, Air Conditioning Compressor, and firewall. | |||
| Battery Configuration | Li-ion, single pack, integrated into frame | |||
| Battery Capacity | 68kWh, usable capacity 67kWh. Maximum degradation rate of 5% per year, but usable capacity shall not to be less than 70% for the life of the vehicle or eight (8) years, whichever comes last. | |||
| Onboard Charger | 10.5kW output / 11.3kW input | Rating of Batteries [at 0°F]: | 70 amp-hr each | |
| CCA each battery: | 650 | |||
| Minutes RC: | 120 70 ah | |||
| Battery Voltage | ||||
| Peak DCFC Power | 400VDC |
115kW
| Transmission | Single speed w/E-differntial | Transmission Model #: | Ford OEM | |
| Front Axle | OEM Front Gross Axle Weight Rating (FGAWR) | FGAWR [lb.]: | 4130 | |
| Rear Axle | OEM Rear Gross Axle Weight Rating (RGAWR) | RGAWR [lb.]: | 6000 |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .