4.02 SPRMM1-26-P-MB33.pdf

PAGE 1 OF Form Approved ORDER FOR SUPPLIES OR SERVICES OMB No. 0704-0187

Expires Aug 31, 1992 5. CERTIFIED FOR NA- TIONAL DEFENSE UNDER 2. DELIVERY ORDER NO. 4. REQUISITION/PURCH REQUEST NO. 1. CONTRACT/PURCH ORDER NO. 3. DATE OF ORDER DPAS 15 CRF 700

DO

6. ISSUED BY 7. ADMINISTERED BY (If other than 6) CODE CODE 8. DELIVERY FOB

DEST

OTHER

(See Schedule if other)

11.MARK IF BUSINESS IS FACILITY CODE CODE 10. DELIVER TO FOB POINT BY (Date) 9. CONTRACTOR

SMALL

Q Q 12. DISCOUNT TERMS SMALL DISADVANTAGED NAME AND ADDRESS WOMEN-OWNED

13. MAIL INVOICES TO

Q Q

14. SHIP TO 15. PAYMENT WILL BE MADE BY CODE CODE

MARK ALL PACKAGES AND PAPERS WITH CONTRACT OR

ORDER NUMBER

16. T O DELIVERY This delivery order is issued on another Government agency or in accordance with and subject to terms and conditions of above numbered contract. Y R P D Reference your furnish the following on terms specified herein. E E R PURCHASE O THE CONTRACTOR HEREBY ACCEPTS THE OFFER REPRESENTED BY THE NUMBERED PURCHASE ORDER AS IT MAY PREVIOUSLY HAVE BEEN OR IS NOW ACCEPTANCE. F MODIFIED, SUBJECT TO ALL OF THE TERMS AND CONDITIONS SET FORTH, AND AGREES TO PERFORM THE SAME.

NAME OF CONTRACTOR SIGNATURE TYPED NAME AND TITLE DATE SIGNED

If this box is marked, supplier must sign Acceptance and return the following number of copies:

17. ACCOUNTING AND APPROPRIATION DATA/LOCAL USE

22. 23. 18. 19. 20. 21. QUANTITY ORDERED/ SCHEDULE OF SUPPLIES/SERVICES UNIT AMOUNT ITEM NO. UNIT PRICE ACCEPTED*

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gatheringand maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection ofinformation, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite1204, Arlington, VA 22202-4302 and to the Office of Management and Budget, Paperwork Reduction Project (0704-0187), Washington, DC 20503. Please DO NOT RETURN your form toeither of these addresses. Send your completed form to the procurement official identified in Item 6.

24. UNITED STATES OF AMERICA 25. TOTAL * If quantity accepted by the Government is same as quantity ordered indicate by X. If different, enter 29. actual quantity accepted below quantity ordered and encircle. DIFFERENCES

BY: CONTRACTING/ORDERING OFFICER

27. SHIP. NO. 26. QUANTITY IN COLUMN 20 HAS BEEN 28. D.O. VOUCHER NO. 30. INITIALS RECEIVED ACCEPTED, AND CONFORMS TO THE INSPECTED CONTRACT EXCEPT AS NOTED PARTIAL 33. AMOUNT VERIFIED CORRECT FOR 32. PAID BY

FINAL

31. PAYMENT 34. CHECK NUMBER DATE SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

COMPLETE 36. I certify this account is correct and proper for payment

PARTIAL 35. BILL OF LADING NO.

FINAL SIGNATURE AND TITLE OF CERTIFYING OFFICER DATE

38. RECEIVED BY 40. TOTAL CONTAINERS 41. S/R ACCOUNT NUMBER 42. S/R VOUCHER NO. 37. RECEIVED AT 39. DATE RECEIVED

CONTRACTOR MUST SUBMIT FOUR COPIES OF INVOICE PREVIOUS EDITIONS ARE OBSOLETE EDADD Form 1155, MAY 90

SPRMM1-26-P-MB33 2026 APR 30 24349-0019 (* )

DO-A3

SPRMM1 S0512A

SPRMM1 DLA MECHANICSBURG DCMA SOUTHERN CALIFORNIA

DLR PROCUREMENT OPS DSCC-ZI COC W5 18901 SOUTH WILMINGTON AVENUE

P. O. BOX 2020, 5450 CARLISLE PIKE BUILDING DH2 X

MECHANICSBURG,PA 17055-0788 CARSON,CA 90746-2856

BUYER: Q. CRENSHAW/ZIA4 SCD: B

PHONE: (717) 550-3838

5P967

SEE SCHEDULE X

DANTE VALVE COMPANY

ATTN: BENJAMIN ROMAN NET 30 DAYS

15230 S LAKEWOOD BLVD

BELLFLOWER,CA 90706-4289

POC: (562) 866-6680 SEE BLOCK 15

HQ0339

SEE SCHEDULE DEFENSE FINANCE & ACCOUNTING SRVCE

ATTN: DFAS-JDCBB-CO

P.O. BOX 182381

COLUMBUS,OH 43218-2381

EFT:T

X 255911

SEE SECTION G

SEE SCHEDULE

$25,871.00

KLMNOPQRSTT. DANOWSKI

PAGES

OFPAGEREFERENCE NO. OF DOCUMENT BEING CONTINUED

NAME OF OFFEROR OR CONTRACTOR

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SPRMM1-26-P-MB33 2 23

DANTE VALVE COMPANY

0001 NSN 7HH 4820-01-642-1540

VALVE,SAFETY RELIEF SHELF LIFE 0-00

MADE TO: 5P967

IAW: BAMHG08KHJ

SEE TECHNICAL REQUIREMENTS IN SECTIONS C, D, E, AND ATTACHMENTS

HM QUP ICQ PMT CD PM WM CUD CT UC LP IC UCL SP MK PACK UNIT PKWT UNIT PKCU OPI

N 001 000 41 1 00 GB JC 0 ED A 00 B 00 EQQ 58.0 3.061 M

PACKAGING IS IN ACCORDANCE WITH MIL-STD-2073

NOTE:

INSPECT AT SOURCE

ACCEPT AT SOURCE

SHIP TO

0001AA DEL BY: 2026 NOV 12 ACRN: AA TP: 3 W25G1U 1 EA $25,871.00

PR N00104-25-X-2385 DO-A3 $25,871.00

M/F: REC. OFF. NON-MILSTRIP

AWARD NOTES:

This award is being issued under Special Emergency Procurement Activity (SEPA)

- Emergency Acquisition Flexibilities (EAF) authority.

All contractual documents (contracts, purchase orders, task orders, delivery orders and modifications) related to this procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile or sent by other electronic methods, such as email.

The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein.

Post Award Administrator: dlamechanicsburgcontractadmin@dla.mil

CONTACT INFORMATION: Benjamin Roman EMAIL: BRoman@dantevalve.com PHONE: 562-866-6680 ext 4257

DELIVERY: (180 DELIVERY DAYS ARO)

FOB: ORIGIN

SOURCE INSPECTION AND ACCEPTANCE: CAGE CODE (5P967)

PACKAGING, FINAL INSPECTION & ACCEPTANCE: CAGE CODE (5P967)

If you do not anticipate meeting the required delivery date set forth in this order, please notify the Contracting Officer IMMEDIATELY so new delivery terms can be established.

CONTINUED ON NEXT PAGE

NAME OF OFFEROR OR CONTRACTOR

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SPRMM1-26-P-MB33 3 23

DANTE VALVE COMPANY

AWARD NOTES:

Early/partial shipment is requested and authorized at no additional cost to the Government.

Inspection and acceptance (I/A) at source is REQUIRED. Inspection and acceptance at destination is not authorized and will NOT be accepted!

If I/A are not completed as stated prior to shipment, the contractor will be held responsible for returning the material, at their expense, to the above location so that inspection and acceptance can be completed. If inspection and acceptance are not completed as stated, payment will not be processed and theorder/contract may be cancelled or terminated for default.

Contractors can view their orders, contracts and modifications at the Electronic Document Access (EDA) web tool. This web tool is located on the Procurement Integrated Enterprise Environment (PIEE) web site. It is recommended that contractors register for EDA at:

https://cac.piee.eb.mil/. Click on New User and Register.

SHIPPING INSTRUCTIONS. Transportation/shipment instructions are done through SIR (Shipment Instructions Requests) via DCMA e-Tools. Go to www.dcma.mil, go to the Customer tool bar on the top right of the website and choose eTools.

This will allow contractors to register for the tool to assist in printing shipping labels and transportation information for all contracts. This area also offers training on how to access the system. Go to https://www.dcma.mil/WBT/sir/ for more information or contact your local DCMA office if unable to register. This system is the required route for ALL FOB Origin contracts to ensure material is shipped to the proper locations to support the fleet.

UCF SECTION F PRODUCTION FACILITY CHANGES

(a) The performance of any of the work contracted for in any place other than that named in the contract is prohibited unless specifically approved by the Contracting Officer. Written requests for a change in production facilities must be submitted in writing to the Contracting Officer. Changes in production facilities may be approved, provided:

(1) Performance by small business or in labor surplus areas as required by the contract will not be changed;

(2) The change will not cause a delay in delivery or necessitate a change in the purchase description;

(3) The free on board (f.o.b.) point is not changed; and

(4) Each request is supported by a price reduction of $250.00 to cover the Government's administrative costs to process the change.

(b) The Government reserves the right to deny approval even if these four elements are met.

The following website is provided to suppliers to obtain the full text of the DLA Procurement Notes listed below:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

CONTINUED ON NEXT PAGE

NAME OF OFFEROR OR CONTRACTOR

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SPRMM1-26-P-MB33 4 23

DANTE VALVE COMPANY

AWARD NOTES:

The following DLA Procurement Notes are applicable to this requirement:

E06 Inspection and Acceptance at Source (JUN 2018)

POC EMAIL: QUINTON.CRENSHAW@DLA.MIL

SPRMM1-26-P-MB33

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

WSSTERMBA00

CONTACT INFORMATION

When a DCMA office is shown on a Contract/Purchase Order, the Administrative Contracting Officer (ACO) is the primary point of contact and all inquiries shall initially be directed to that office for necessary action.

Inquiries and correspondence directed to the Post Award PCO should be addressed as follows:

Code: ( <ZIA4> ) Weapon System LRC: ( <GLL> ) Telephone: ( <N/A> ) E-Mail: ( <QUINTON.CRENSHAW@DLA.MIL> )

In the event that the listed PCO contact information is no longer valid and a follow-on PCO cannot be identified, contact itimp.wss.fct@navy.mil.

PART I - THE SCHEDULE

SECTION C

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

CLIN: 0001

NIIN: 016421540 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: VALVE,SAFETY RELIEF

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the VALVE,SAFETY RELIEF .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The VALVE,SAFETY RELIEF furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<5P967 BAMHG08KHJ>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-130, REV N, 16 NOV 2012> .

3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

CLIN: 0001

NIIN: 016421540 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: VALVE,SAFETY RELIEF

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

252.211-7003

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier' means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot or batch number; and the serial number.

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more; except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule" in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number < > .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number < >

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that --

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs)(Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent; (e.g. Vehicle Identification Number):

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number: DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only:

original part, lot or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version:

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii) or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number)

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used)**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used.)**

(11) Description.

** Once per item.

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http:/dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number < > , Unique Item Identifier

Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

WSSTERMDZ03

PRESERVATION, PACKAGING, PACKING AND MARKING

The contractor shall preserve, package, pack and mark all items as cited below. Where specifications or standards are cited herein the latest revision of that specification or standard shall apply.

1. PRESERVATION REQUIREMENTS

a. SYSTEM STOCK SHIPMENTS - The contractor shall preserve all items intended to enter the military distribution system for stock in accordance with the MIL-STD-2073-1, "Standard Practice for Military Packaging", Packaging Requirements Code specified in the Section B, Part I of the Schedule. When a Specialized Preservation Code/Method of Preservation (MOP) (Table J-Ia) is specified, and one or more of the following packaging fields (WM, CUD, CT, UC) value is a 00 (numeric), the Specialized Preservation/MOP procedure and materials takes precedence. Contractors should disregard the LP field and third digit of the PACK field and use the Unit Container Level (UCL) to identify the level of packing protection the unit container meets for packing requirements. When HM = D, the item is regulated in accordance with Title 49 Code of Federal Regulations (CFR); when HM = N the item is not regulated for transportation.

1) When a specified packaging material has an associated Qualified Products List (QPL), the contractor shall use only packaging materials produced by a manufacturer listed on the applicable QPL. Barrier materials that have QPLs are MIL-PRF-131, MIL-PRF-81705, MIL-PRF-22191, MIL-PRF-3420 and MIL-PRF-22019. Sources for QPL material can be obtained from the Qualified Products Database at http://qpldocs.dla.mil/.

b. IMMEDIATE USE/INSTALLATION AND PART NUMBER BUY SHIPMENTS - Government PCO or ACO approval is required to use the packaging standards outlined in this paragraph. Any national stock numbered (NSN) item required for immediate use (used or consumed within 7 days of receipt) or direct installation, or part numbered item (authority granted to ship without NSN) shall be preserved and packed in accordance with ASTM D3951-18 (2023), "Standard Practice for Commercial Packaging", for all shipments to a Continental United States (CONUS) government activity or contractor-owned facility. All material destined for overseas shipment (OCONUS) shall be preserved in accordance with MIL-STD-2073-1.

c. GOVERNMENT-OWNED MATERIAL - In the event that the contract expires, is terminated, or completed, and Government-owned material is to be returned to the supply system, the contractor shall preserve and package this material in accordance with the requirements of paragraph 1.a.

2. PROTECTION FROM DEGRADATION DUE TO ELECTROSTATIC (ES)/ELECTROMAGNETIC (EM) FORCES

a. When ASTM D3951-18 (2023) is authorized for packaging and the item is considered Electrostatic Discharge sensitive (ESDS), protection shall be in accordance with ANSI/ESD S20.20-2021, "For the Development of an ESD Control Program for - Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)."

b. When MIL-STD-2073-1 is specified and the preservation method code (PMT) in the solicitation does not specify ESD/EM protection (PMT = GX) and the contractor's proposed item of supply is subject to degradation from ES/EM forces, contractors shall provide recommended packaging data with their proposals/quotes.

3. PACKING REQUIREMENTS - The contractor shall pack as follows:

Domestic Shipments (CONUS): Level B

Overseas Shipments (OCONUS) (including Navy ships at sea):

WSSTERMDZ03 (CONT)

PRESERVATION, PACKAGING, PACKING AND MARKING

Via air, FPO, APO Level B Via freight forwarder Level B Via surface Level A

Exterior shipping containers for Packing Levels A and B are listed in MIL-STD-2073-1, Appendix C, Table C.II.

Long-life reusable containers and wood containers are shipping containers which do not require overpacking for shipment.

4. MARKING REQUIREMENTS - All unit, intermediate and shipping containers shall be marked in accordance with MIL-STD-129. In addition, the following specific requirements apply:

a. ADDITIONAL MARKING FOR SPARES ONLY - Each MIL-STD-129 label shall also include the following:

1) Procurement Instrument Identifier (PIID) - the 13-digit contract order number,

2) Contract Line Item Number (CLIN) - the 4-digit individual line item number (e.g. 0001, 0002, etc.), and

3) SubCLIN - the 6-digit sub line item number (e.g. 0001AA, 0001AB, 0002AA, 0002AB, etc.).

b. DEPOT LEVEL REPAIRABLE (DLR) LABELS

1) Items identified with a Cognizance (COG) Code of either "7" or an even number preceding the NSN, excluding

6A, 6H and 6X COGs (e.g. 7RH 5826-014289999), are defined as Depot Level Repairable (DLR) items. DLR items require that a DLR label be placed on the outside of the unit, intermediate and shipping containers as close to the bar code label as possible.

EXCEPTION: When a DLR item requires use of both a reusable inner unit container and a reusable outer shipping and storage container (excluding wood and fiberboard), only the inner unit container shall be affixed with a DLR label. In these cases only, DLR labels shall NOT be placed on the outer reusable container.

2) Labels are available via the Naval Forms Online website: https://forms.documentservices.dla.mil/order/.

The website will advise the procedures for ordering and establishing an account.

3) NAVSUP WSS authorizes contractors to create and print their own DLR labels. Labels shall follow the standard size and font options listed in below chart. Text shall be in all upper case letters of the same style font. The label used shall be sized proportionate to the size of the container. Labels shall be horizontally printed and consist of yellow "DLR" text font on a solid blue background. Labels shall meet requirements of MIL-STD-129 section 4.2.2. Labels shall be of a water-resistant grade of paper, film, or plastic, coated on one side with water-insoluble, permanent type adhesive. The adhesive shall adhere to metal, plastic, aluminum or fiberboard surfaces under high and low temperatures. Labels shall have a finish suitable for printing and writing on with ink without feathering or spreading, be capable of withstanding normal handling and storage conditions, and remain securely in position. Application specific performance criteria and durability requirements to ensure functionality in various climatic environments should be tailored, if required, using MIL-PRF-61002. MIL-PRF-61002 can be used as an acquisition tool when labels presently being used are not performing satisfactorily or when new conditions or applications require special label stock for those particular situations.

NSN DESCRIPTION QUANTITY APPLICATION FORM NUMBER

PER UNIT

PACKAGE

0108LF5055300 DLR Label 100 Unit NAVSUP 1397-1

2in.x3in. Container 0108LF5055000 DLR Label 100 Intermediate NAVSUP 1397

3inx5in. Shipping Container

c. SPECIAL MATERIAL IDENTIFICATION CODE (SMIC) FOR NAVSUP WSS MARITIME REQUIREMENTS ONLY

1) Certain Program related items are identified by a two-position SMIC, which appears as a suffix to the NSN

(e.g. 1H 4730 009001317 L1), and require special markings. Containers shall be marked or labeled with letters, maximum two inches high on two (2) sides and two (2) ends as follows:

SMIC MARKINGS COLOR TYPE CONTAINER

L1 LEVEL 1 RED Unit, intermediate and shipping

(size permitting) S1 SURFACE RED Unit, intermediate and shipping

WSSTERMDZ03 (CONT)

PRESERVATION, PACKAGING, PACKING AND MARKING

LEVEL 1 (size permitting) D4/D5/D7 DSS-SOC RED Unit, intermediate and shipping

(size permitting) C1* LEVEL 1 SPECIAL Green Unit, intermediate and shipping

CLEAN 02-N2

CP/VG* SPECIAL CLEAN GREEN Unit, intermediate and shipping

02-N2 D0/D6/D8* DSS-SOC Green Unit, intermediate and shipping

SPECIAL CLEAN

O2-N2

VU FBW SFCC VU BLUE Unit, intermediate and shipping

(size permitting) SW FBW SFCC SW BLUE Unit, intermediate and shipping

(size permitting) Q3/Q5 Q3 or Q5 RED Unit, intermediate and shipping *denotes Oxygen Clean requirements in accordance with MIL-STD-1330 "Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems."

5. PALLETIZATION. Palletization of shipments shall be accomplished in accordance with MIL-STD-147 "DOD Standard Practice: Palletized Unit Loads." Failure to meet these palletization/packaging requirements and measures, without a written waiver from the PCO or ACO, may result in charges back to the contractor for repalletization and/or repackaging of items. Pallets shall conform to the requirements of American National Standards Institute, Material Handling-MH1-2016, Pallets, Slip Sheets, and Other Bases for Unit Loads. MH1-2016 may be obtained at the following website: http://www.mhi.org.

a. General Purpose Unit Loads - When shipping directly to a Navy afloat unit, pallets meeting MH1-2016, Part No.

MH1/9-02SW4048 or MH1/9-10BW4048 for unit loads under 1,500 pounds and MH1/9-03SW4048 for unit loads over 1,500 pounds shall be used.

b. Hazardous Material Unit Loads - Unless otherwise specified in the contract or purchase order hazardous material containers, except cylinders and 55 gallon drums, shall be palletized utilizing MH1-2016 Part No. MH1/9-07SW4848 pallets.

c. Use of nonstandard commercial pallets is prohibited.

6. WOOD PACKAGING MATERIAL (WPM). All shipments destined to the DOD must be treated and marked in accordance with the International Standards for Phytosanitary Measures Guidelines for Regulating Wood Packaging Material in International Trade (ISPM 15).

a. For all WPM furnished under this contract the contractor shall ensure the American Lumber Standards Committee (ALSC) approved mark is applied to every shipment regardless of destination.

b. Failure to comply with the requirements of ISPM 15 may result in refusal of the shipment, destruction or corrective treatment of WPM at the point of receipt and the associated costs charged back to the contractor.

7. NAVY SHELF-LIFE PROGRAM. Navy shelf-life requirements are listed under the item description in a 3-digit alpha/numeric code. Position one (1) is the DOD shelf-life code, defining the type of shelf-life for an item (Type I, non -extendible or Type II, extendible), and the number of months an item can remain ready for issue in a Navy specified package. Positions two (2) and three (3) combined form the Navy-unique shelf-life action codes used by storage activities, and do not impose any requirements on the contractor. The contractor shall use the applicable shelf-life paragraphs and table in MIL-STD-129 to apply either Type I or Type II shelf-life markings to an item's unit, intermediate and shipping containers. Contractors will ensure that at least eighty-five percent (85%) of the Navy shelf-life requirement is remaining when received by the first government activity.

8. REUSABLE NSN CONTAINERS. An item that has an NSN assigned in the "Container NSN" field (e.g . 8145 012622982) requires shipment in a reusable shipping and storage container.

a. REUSABLE CONTAINERS FOR NAVSUP WSS, MARITIME REQUIREMENTS - Reusable NSN containers for maritime material (designated by a COG Code of "7E", "7G" and "7H") shall be provided as contractor-furnished material (CFM).

b. REUSABLE CONTAINERS FOR NAVSUP WSS, AVIATION REQUIREMENTS - Reusable NSN containers (excluding fiberboard and most wood) for aviation material (designated by a COG Code of "7R", "6K" or "0R") shall be provided as government-furnished material (GFM). Fast pack containers will not be provided as GFM. To obtain GFM reusable

WSSTERMDZ03 (CONT)

PRESERVATION, PACKAGING, PACKING AND MARKING

containers, the contractor must request via email usn.philadelphia.navsupwssphil.mbx.navsupcrf@us.navy.mil at least 90 days prior to the anticipated shipping date, 30 days prior for repair contracts. If the Navy's Container Management Area (CMA) informs the contractor that containers are unavailable, the following alternate packaging requirements apply. The unavailability of reusable containers shall not be an excusable delivery delay.

ALTERNATE PACKAGING REQUIREMENTS FOR ITEMS ASSIGNED THE FOLLOWING CONTAINERS

Container Container Alternate Packaging Code NSN Part Number (80132) IAW MIL-STD-2073-1 8145 002609548 P069-2 }

8145 002609556 P069-1 } N 001 000 GX 1 00 K3 LT B ED

8145 002609559 P069-3 } UCL = B

8145 002609562 P069-4 } SPMK = 39

8145 010124088 P069-6 } PACK = QFF

8145 010140440 P069-5 } 8145 011644073 P069-7 } 8145 012622982 15450-1 } If MOP/PMT = GX

--------------------------------------} N 001 000 GX 1 00 K3 GH Z ED

8145 012622983 15450-2 } Z= use 1.5" of "GH" cushioning --------------------------------------} between barrier bag and Unit Container

8145 012622984 15450-3 } UCL = B

--------------------------------------} SPMK = 39

8145 012622985 15450-4 } PACK = QFF

8145 012622986 15450-5 } For all other MOPs/PMTs

--------------------------------------} N 001 000 51 1 00 EA GH F ED

8145 012622987 15450-6 } UCL = B

--------------------------------------} SPMK = 03

8145 012622988 15450-7 } PACK = QFF

c. All excess empty reusable shipping and storage containers shall be turned-in to the nearest Container Reuse and Refurbishment Center (CRRC). CRRC locations/points of contact: Program Manager - 215-697-2063

Norfolk, VA-757-445-9099 ext.124 Yokosuka, Japan-011-81-46-816-6304 Cherry point, NC-252-466-2331 Lemoore, CA-559-998-0220 Jacksonville, FL-904-542-1014 Okinawa, JAPAN-011-81-46-816-6304 San Diego, CA-619-545-8360 Iwakuni, JAPAN-011-81-46-816-6304 Puget Sound, WA-360-476-9777 Bahrain-011-318-439-9553

d. The stock-numbered, long-life, reusable containers identified herein as GFM are property of the U.S. Navy and only shall be used to fulfill orders from the Navy and U.S. Marine Corps; these containers shall not be used to fulfill orders from the U.S. Army, U.S. Air Force, any other agency of the U.S. Government or Foreign Military Sales (FMS) customer.

9. REUSABLE NSN CONTAINERS FOR FOREIGN MILITARY SALES (FMS), JOINT PROGRAM OFFICE (JPO) OR OTHER FOREIGN FORCES

ACQUISITION

a. Reusable shipping and storage containers shall be provided as CONTRACTOR-FURNISHED MATERIAL (CFM), unless otherwise specified.

b. Contractors may tender offers including alternate, non-reusable, packaging methods and be considered responsive.

WSSTERMDZ03 (CONT)

PRESERVATION, PACKAGING, PACKING AND MARKING

10. HAZARDOUS MATERIALS. This section applies when items to be delivered under this contract are considered hazardous materials as defined by 49 CFR, FED-STD-313, or by the Government's technical representative.

a. Packaging and marking for hazardous materials shall comply with applicable requirements for Performance Oriented Packaging (POP) contained in 49 CFR and the international modal regulations. All performance test requirements shall be supported by test certificates and reports attesting to the date and the results obtained from performance oriented packaging testing. The contractor shall be responsible for assuring that sources providing performance testing services are registered with the U.S. Department of Transportation (DOT). The contractor's signed certification that the packaged configuration meets the applicable modal regulation shall be incorporated on the Wide Area Workflow Receiving Report (WAWF RR), DD Form 250, Material Inspection and Receiving Report, or other related acceptance documents if a WAWF RR, DD Form 250 is not used. The Shipper's Declaration for Dangerous Goods (SDDG) must be included for all air shipments and uploaded to WAWF. All test certificates, reports and training records shall be available for inspection by authorized Government representatives for a period of three years.

b. When a contract/order for hazardous material requires shipment to a military aerial port or through a military container consolidation point including DODAACs SW3225, SW3123, SW3142, N45627, FB4427, FB9150, FB4497, FY8910, FY9125, FB4418, FY4462, FB4484, FY4494, those shipments shall comply with NAVSUP PUB 505/AFMAN 24-204, Preparing Hazardous Materials for Military Air Shipment.

11. SAFETY DATA SHEETS. As required by clauses FAR 52.223-3 "Hazardous Material Identification and Material Safety Data" and DFARS 252.223-7001 "Hazard Warning Labels" the contractor/offeror is required to list any hazardous material to be delivered under the resultant contract by the submission of Safety Data Sheets (SDSs) and Globally Harmonized System (GHS) compliant product label, when applicable, to the NAVSUP WSS or DLA Contracting Officer prior to award. An electronic copy in PDF format of the SDS and GHS product label must also be emailed to NAVSUP WSS Code N242 at NAVSUPWSSMECH.HAZMAT@US.NAVY.MIL. Please include the NSN, CAGE, Part Number, quantity of hazardous material, contract number, and point of contact for hazardous material questions in the body of the email.

12. REPACKAGING TO CORRECT PACKAGING DEFICIENCIES

a. Notwithstanding inspection and acceptance by the Government of items furnished under this contract, or any condition of this contract concerning the conclusiveness thereof, the contractor guarantees that the preservation, packaging, packing and marking (PPP&M), and the preparation of, and method of shipment of such items will conform to the requirements of this contract.

b. Items that do not conform to the PPP&M requirements of this contract may have a Supply Discrepancy Report (SDR, SF-364) written against the contractor at the time of receipt.

c. The Government may at the option of the PCO or ACO, correct PPP&M deficiencies, without prior contractor notification, and require an equitable adjustment in the contract price to cover labor and material when corrective actions are warranted, or return the non-conforming material to the contractor for repackaging at the contractor's expense.

(12-2025)

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

CLIN: 0001

NIIN: 016421540 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: VALVE,SAFETY RELIEF

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies.

52.246-2

INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

This clause is incorporated by reference with the same force and effect as if it were given in full text.

( < > ) Alternate I (JUL 1985) applies when a fixed-price incentive contract is contemplated.

( < > ) Alternate II (JUL 1985) applies when a fixed-ceiling-price contract with retroactive price redetermination is contemplated.

WSSTERMEZ05

INSPECTION AND ACCEPTANCE OF SUPPLIES

<X> 1. Inspection of Supplies shall be performed at the contractor location shown on Page One by the Contract Administration Office (CAO) also shown on Page One, unless otherwise specified below:

<X> Manufacturing Site at <5P967> by the Manufacturing Site CAO <S0512A> .

< > Subcontractor's Sites at < > by the Subcontractor Site CAO < > .

< > Packaging Site at < > by the Packaging Site CAO < > .

< > DCMA Naval Special Emphasis Operations < > .

<X> 2. Final Acceptance of Supplies and Packaging shall be performed at the contractor's location on Page One by the Contract Administration Office (CAO) also shown on Page One, unless otherwise specified below:

<X> Manufacturing Site at <5P967> by the Manufacturing Site CAO <S0512A> .

< > Subcontractor's Site at < > by the Subcontractor Site CAO < > .

< > Packaging Site at < > by the Packaging Site CAO < > .

< > DCMA Naval Special Emphasis Operations < > < > Destination.

< > 3. Inspection and Acceptance of Supplies will be performed by the consignee at Destination. (4-15)

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.247-29

F.O.B. ORIGIN (FEB 2006)

WSSTERMFZ02

TRANSPORTATION ASSISTANCE

To obtain transportation assistance for an upcoming shipment, contractors are to follow the appropriate directions listed below, based on the terms and conditions of the specific contract.

1. For all contracts administered by a Defense Contract Management Agency (DCMA) office (as shown on Page 1 of the contract, or in a subsequent modification), contractors are to contact the Transportation Office at that DCMA.

If the DCMA Transportation Office is unable to provide assistance, contractors may contact transportation customer service at TARPINQ.WSS.fct@navy.mil for transportation arrangements.

2. For FOB Destination contracts, consignment address information is available electronically at the DoD Activity Address Codes (DODAAC) website https://home.daas.dla.mil/daashome/daasinq.asp.

WSSTERMFZ02 (CONT)

TRANSPORTATION ASSISTANCE

For this type of contract, additional information can be found in the clause WSSTERMLZ06 entitled "CONSIGNMENT

INSTRUCTIONS."

(4-23)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

ACRN GN/GRNT BGN/END SYMBL SBHD OBJ BCN SA AAA TT PAA COST-CODE AMOUNT TAC

AA 97 00 XX XX 4930 NC1A 000 81004 0 050120 7R 000000 8PMH00000000 $25,871.00 NN6W

252.232-7006

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document Type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, electronic Submission of Payment Requests…