4.02 SPRMM1-26-D-NB01 Fully Executed.pdf

7/23/2026

TECHNICAL DATA PACKAGE (DRAFT PRINT)

NIIN: 014446260 VERSION: 025 PAGE 1

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

1. SCOPE

1.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, March 2026, Specification for the United States Navy 25 Person (Mark-7) and 50-person (Mark-8) Mod2 Inflatable Lift Raft.

1.2 Government Furnished Material - Government furnished material is available. The material and quantities are as follows: <SURVIVAL INSTRUCTIONS S9008-EA-INS-010 (NSN 0910-LP-102-2272), QTY 1 (ONE). THE INSTRUCTIONS SHALL BE WATERPROOF, IN ENGLISH, BE PRINTED FROM A PDF FORMAT FILE, AND SUSPENDED IN A CLEAR FILM ENVELOPE FROM ONE OF THE

CANOPY ARCH TUBES.

MANUAL REVERSE OSMOSIS DESALINATOR (MROD) - NSN 4610-01-319-5337 - QTY 1 (ONE)

SHALL BE PACKED WITH THE SURVIVAL EQUIPMENT.

STAT T&E COE-Report-05-2013, No NSN, QTY 1 (ONE)>

2. APPLICABLE DOCUMENTS

2.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, and 50-person (Mark-8) Mod2 Inflatable Lift Raft.>

2.2 <Additional External Documents:

GFP document STAT T&E COE-Report-05-2013 GFP document TM S9008-EA-INS-010 Survival Instructions Aug 2023>

2.3 <This manufacture requirement has External PDF Documents.

These documents are required to perform the necessary requirements.

These documents should be attached to solicitations/awards.

If these documents do not attach to the solicitation/award, sources must contact NAVSUP WSS DLA Contracting, Officer to obtain a copy.>

2.4

DRAWING NO. CAGE REV DOC TYPE DISTR CD SHEET NR REV TYPE SIZE

5111055 53711 - A 0001 - 49998 0134858

3. REQUIREMENTS

3.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, and 50-person (Mark-8) Mod2 Inflatable Lift Raft, associated drawings, technical publications, document references, and DD 1423 CDRL's.

3.2 Manufacturing and Design - The LIFE RAFT,INFLATABL furnished under this contract/purchase order shall meet the material and physical requirements as specified <IN ACCORDANCE WITH THE 25 PERSON MK7 AND 50 PERSON MOD 2 INFLATABLE

LIFE RAFT

EXTERNAL SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01, MARCH 2026.>

3.3 First Article Approval (Contractor Testing) - First Article Test (FAT) and approval is required.

3.4 Production Lot Approval (Contractor Testing) - Production Lot Test and approval is required.

3.4.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority.

Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788.

Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the

NIIN: 014446260 VERSION: 025 PAGE 2

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

Contractor.

4. QUALITY ASSURANCE

4.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01,

4.2 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.4 First Article Test/Inspection (Contractor) - The Contractor shall conduct <NON DESTRUCTIVE:

Performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 Person (Mark-7) and 50 person (Mark-8) mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's> First Article Test/Inspection on <Performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2020, Technical Data Package, for the United State Navy, 25 Person (Mark-7) Mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's.> unit(s) in accordance with requirements <Performed in accordance with External Technical Data Package

(PDF),

NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United States Navy, 25 Person (Mark-7) and 50 Person (Mark-8) Mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's.> .

4.5 Production Lot Test/Inspection Report - The Contractor shall prepare and submit a report in accordance with the Contract Data Requirements List (DD Form 1423).

4.6 Production Lot Test (Contractor) - The Contractor shall perform 100% production testing in accordance with <DETAIL SPECIFICATION: Will be performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 Person (Mark-7) and 50 Person (Mark-8)Mod 2 Inflatable Lift Raft, section 4 (Verification and Quality Assurance), and DD 1423's CDRL's

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

5.2 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, March 2026, Specification for the United States Navy 25 Person (Mark-7) Mod 2 Inflatable Lift Raft.>

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES

6.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, And 50 Person (Mark-8) mod 2 Inflatable Lift Raft.>

6.2 <This manufacture requirement has an External PDF Document NSWCCD-83-TM-2026/01, March 2026, Specification for the United States Navy 25 Person (Mark-7) Mod 2 and 50 Person (Mark-8) Mod 2 Inflatable Lift Raft. This document is required to perform the necessary requirements. This document should be attached to solicitations/awards. If this document does not attach to the solicitation/award, sources must contact NAVSUP WSS DLA Contracting Officer to obtain a copy.>

NIIN: 014446260 VERSION: 025 PAGE 3

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

6.3 <All comments, suggestions, or questions about the details of this TDP, and associated external documents, shall be directed to the primary contracting officer via email, or by mailing correspondence to:

Contracting Officer DLA Weapons Support - Mechanicsburg 5450 Carlisle Pike, Bldg. 203N Mechanicsburg, PA 17050-2411>

6.4 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/

A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

NAVSUP-WSS

Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue:

Commanding Officer

Code 009 5450 Carlisle Pike

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to

NAVSUP-WSS.

6.5 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings.

There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows:

A... approved for public release; distribution is unlimited.

B... distribution authorized to US Governments agencies only.

C... distribution authorized to US Government agencies and their contractors.

D... distribution authorized to DoD and DoD contractors only.

NIIN: 014446260 VERSION: 025 PAGE 4

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

E... distribution authorized to DoD Components only.

F... further distribution only as directed by Commander, Naval Sea

Systems Command, code 09T.

X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161.

B regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, Previous editions are obsolete searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

1. DATA ITEM NO.

(2 Data Items) Form Approved OMB No. 0704-0188

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM ________ OTHER ______________________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

DD Form 1423-2, JUN 90

S/N 0102-LF-010-5600

Page ______ of ______ Pages

2. TITLE OF DATA ITEM

18. ESTIMATED

TOTAL PRICE

CONTRACT DATA REQUIREMENTS LIST

I

17. PRICE GROUP

17. PRICE GROUP 3. SUBTITLE

3. SUBTITLE

7. DD 250 REQ

8. APP CODE

DIST STATEMENT

REQUIRED

9.

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

DATE OF SUBSEQUENT

SUBMISSION

13.

14. DISTRIBUTION

b. COPIES

4. AUTHORITY

(Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

16. REMARKS

a. ADDRESSEE

Draft

Repro

Reg

Final

15. TOTAL

J. DATE G. PREPARED BY H. DATE I. APPROVED BY

X

LIFE RAFT,INFLATABL

FIRST ARTICLE

TEST REPORT

DI-NDTI-80809A SEE BLOCK 16 NSWCCD NORFOLK

SS ASREQ ASREQ

AN C NA NA

DCMA QAR 00 01 00

THE CONTRACTOR SHALL SUBMIT FIRST ARTICLE INSPECTION

RESULTS IN ACCORDANCE DLA NAVSUP PCO 00 01 00

WITH THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2 INFLATABLE

LIFE RAFT EXTERNAL NAVSUP WSS N96 00 01 00

PDF DOCUMENT NSWCCD-83-TM-2026/01, MARCH 2026 (SECTION 4).

NSWCCD NORFOLK 00 01 00

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER FIRST

ARTICLE

INSPECTION/TEST HAS BEEN COMPLETED.

00 04 00

QUALITY CONFORM/PRODUCTION LOT

DI-NDTI-80809B SEE BLOCK 16 NSWCCD NORFOLK

THE CONTRACTOR SHALL SUBMIT A QUALITY CONFORMANCE

INSPECTION REPORT, IN DLA NAVSUP PCO 00 01 00

ACCORDANCE WITH THE 25 PERSON MK7 MOD 2 & 50 PERSON MK8

MOD2 INFLATABLE LIFE NAVSUP WSS N96 00 01 00

RAFT EXTERNAL SPECIFICATION PDF DOCUMENT

NSWCCD-83-TM-2026/01, MARCH 2026 NSWCDD NOFOLK 00 01 00

(SECTION 4).

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER

CONFORMANCE INSPECTION HAS

BEEN COMPLETED.

KLMNOPQRST

NAVSUP WSS N9652.QL 2026 APR 16

1 4

DD FORMo1423-2 REVERSE, JUN 90

5010.12-L (AMSDL), or one-time DID number, that defines data

Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management", etc.

(See DoD 5010. 12-M for detailed instructions.)

Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4;

Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14,; Desired medium for delivery of the data item.

Enter total number of draft/final copies to be delivered.

Enter addresses and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Specify when subsequent submittals are required, when applicable.

Specify when first submittal is required.

Specify as-of date of data item, when applicable.

Specify number of times data items are to be delivered.

For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoD 5230.24).

Specify requirement for approval of a draft before preparation of the final data item.

Specify requirement for inspection/acceptance of the data item by the Government.

Enter technical office responsible for ensuring adequacy of the data item.

Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD content and format requirements.

Enter subtitle of data item for further definition of data item (optional entry).

Enter title as it appears on data acquisition document cited in Item 4.

Date CDRL was approved.

Signature of CDRL approval authority.

Date CDRL was prepared.

Signature of preparer of CDRL.

Enter name of system/item being acquired that data will support

Self-explanatory

INSTRUCTIONS FOR COMPLETING DD FORM 1423

FOR GOVERNMENT PERSONNEL

Item A.

Item B.

Item C.

Mark (X) appropriate category: TDP - Technical Data

Item D.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G.

Item H.

Item I.

Item J.

Item 1.

Item 2.

See Dod FAR Supplement Subpart 4.71 for proper numbering.

Item 3.

Item 4.

Item 5.

Item 6.

Item 7.

Item 8.

Item 9.

Item 10.

Item 11.

Item 12.

Item 13.

Item 14.

Item 15.

Item 16.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

b. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to theperformance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

The Government's right to use the data shall be governed by the pertinent provisions of the contract.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essentialdata item without conforming to Government requirements,and the administrative and other expenses related toreproducing and delivering such data item regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

MATERIAL INSPECTION

NA C NA NA

THE CONTRACTOR SHALL SUBMIT MATERIAL INSPECTION REPORT IN

ACCORDANCE WITH DLA NAVSUP PCO 00 01 00

THE 25 PERSON MK7 MOD 2 & 50 PERSON MK8 MOD2 INFLATABLE

LIFE RAFT EXTERNAL NAVSUP WSS N96 00 01 00

SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01, MARCH

2026 (SECTION 4). NSWCCD NORFOLK 00 01 00

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER

MATERIAL INSPECTION HAS

QUARTERLY CERTIFICATION

CERTIFICATION/DATA REPORT

DI-MISC-80678 SEE BLOCK 16 NSWCCD NORFOLK

SS QTRLY ASREQ

THE CONTRACTOR SHALL SUBMIT QUARTERLY LIFE RAFT

CERTIFICATION/DATA REPORTS DLA NAVSUP PCO 00 01 00

IN ACCORDANCE WITH THE MK7 MOD 2 & MK8 MOD2 INFLATABLE

LIFE RAFT EXTERNAL NAVSUP WSS N96 00 01 00

SPECIFICATION PDF Document NSWCCD-83-TM-2026/01, March

2026 (SECTION 3). NSWCCD NORFOLK 00 01 00

ON A QUARTERLY BASIS, AND WITHIN FIVE BUSINESS DAYS - UPON

REQUEST BY

THE CONTRACTING OFFICER OR NSWCCD NORFOLK.

EACH REPORT SHALL INCLUDE THE FOLLOWING INFORMATION - FOR

EACH NEW LIFE RAFT

IN TABULAR FORM/COLUMNS OR IN A SPREADSHEET FORMAT:

CONTRACT NUMBER

b. LIFE RAFT SERIAL NUMBER

c. DATE OF MANUFACTURE

d. DATE OF CERTIFICATION

E. MROD SERIAL NUMBER

F. PRIMARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

G. PRIMARY INFLATION VALVE MANUFACTURER AND SERIAL NUMBER

NUMBER

H. SECONDARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

I. SECONDARY INFLATION VALVE MANUFACTURER AND SERIAL

- CONTINUED - 00 04 00

2 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

CONTINUED

REPORTS SHALL BE ELECTRONICALLY SUBMITTED THE FOLLOWING

EMAIL ADDRESS:

CRDR_LC_NavyLifeRafts@us.navy.mil

NEW LIFE RAFT

CERTIFICATION DOCUMENTATION

DI-MISC-80878 SEE BLOCK 16 NSWCCD NORFOLK

NEW LIFE LIFE RAFT ACCOMPANYING CERTIFICATION

DOCUMENTATION: DLA NAVSUP PCO 00 01 00

CONTRACTOR SHALL ENSURE THAT EACH LIFE RAFT IS SHIPPED TO NAVSUP WSS N96 00 01 00

FINAL DESTINATION

WITH ITS ASSOCIATED CERTIFICATION DOCUMENTATION, IN NSWCCD NORFOLK 00 01 00

ACCORDANCE WITH THE

25 PERSON MK7 MOD 2 & 50 PERSON MK8 MOD2 INFLATABLE LIFE

RAFT EXTERNAL SPECIFICATION PDF DOCUMENT

NSWCCD-83-TM-2026/01, MARCH 2026. (SECTION 3).

DOCUMENTATION SHALL INCLUDE THE BELOW-LISTED INFORMATION

IN TABULAR

FORM/COLUMNS OR IN A SPREADSHEET FORMAT:

a. CONTRACT NUMBER

b. LIFE RAFT SERIAL NUMBER

c. DATE OF MANUFACTURE

d. DATE OF CERTIFICATION

e. MROD SERIAL NUMBER

f. PRIMARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

g. PRIMARY INFLATION VALVE MANUFACTURER AND SERIAL NUMBER

h. SECONDARY INFLATION CYLINDER MANUFACTURER AND SERIAL

i. SECONDARY INFLATION VALVE MANUFACTURER AND SERIAL

3 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

MAINTENANCE & SERVICE MANUALS

COMMERCIAL OFF-THE-SHELF (COTS) MANUALS

DI-TMSS-80527 SEE BLOCK 16 NSWCCD NORFOLK

SS ONE/R ASREQ

NA A NA NA

THE CONTRACTOR SHALL PROVIDE SERVICE MANUAL(S) (IN

ENGLISH), TO DLA NAVSUP PCO 00 01 00

INCLUDE INSTRUCTIONS FOR INFLATING, INSPECTING, TESTING,

REPAIRING NSWCCD NORFOLK 00 01 00

AND REPACKING THE MK-7 AND MK-E LIFERAFT - IN ADDITION TO

PARTS

LIST CONTAINIG ALL REPLACEABLE/REPAIRABLE COMPONENTS, IN

ACCORDANCE WITH THE LIFERAFT EXTERNAL TDP PACKAGE (SECTION

3).

HARD COPIES OF THE SERVICE MANUAL (S) SHALL BE SUBMITTED

TO

NSWCCD DETACHED NORFOLK PERSONNEL OR THE DCMA QAR, DURING

THE

FAT

ELECTRONIC COPIES OF THE SERVICE MANUAL (S) SHALL BE

EMAILED,

WITHIN FIVE BUSINESS DAYS AFTER THE FAT, TO THE

CONTRACTING

OFFICER , AND TO THE FOLLOWING EMAIL ADDRESS:

CRDR_LC_NAVYLIFERAFTS@US.NAVY.MIL

00 03 00

4 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative

NIIN: 014753185 VERSION: 022 PAGE 1

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

1. SCOPE

1.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01,

1.2 Government Furnished Material - Government furnished material is available. The material and quantities are as follows: <SURVIVAL INSTRUCTIONS S9008-EA-INS-010 (NSN 0910-LP-102-2272), QTY 1 (ONE). THE INSTRUCTIONS SHALL BE WATERPROOF, IN ENGLISH, BE PRINTED FROM A PDF FORMAT FILE, AND SUSPENDED IN A CLEAR FILM ENVELOPE FROM ONE OF THE

CANOPY ARCH TUBES.

MANUAL REVERSE OSMOSIS DESALINATOR (MROD) - NSN 4610-01-319-5337 - QTY 1 (ONE)

SHALL BE PACKED WITH THE SURVIVAL EQUIPMENT.

STAT T&E COE-Report-05-2013, No NSN, QTY 1 (ONE).> .

2. APPLICABLE DOCUMENTS

2.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01,

2.2 <Additional documents:

GFP document STAT T&E COE-Report-05-2013 GFP document TM S9008-EA-INS-010 Survival Instructions Aug 2023>

2.3 <This manufacture requirement has External PDF Documents.

These documents are required to perform the necessary requirements.

These documents should be attached to solicitations/awards.

If these documents do not attach to the solicitation/award, sources must contact NAVSUP WSS DLA Contracting Officer to obtain a copy.>

2.4

DRAWING NO. CAGE REV DOC TYPE DISTR CD SHEET NR REV TYPE SIZE

5106577 53711 A A 0001 A 49998 0172291 5106577 53711 A A 0002 A 49998 0132687

3. REQUIREMENTS

3.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, and 50-person (Mark-8) Mod2 Inflatable Lift Raft, associated drawings, technical publications, document references, and DD 1423 CDRL's.

3.2 Manufacturing and Design - The LIFE RAFT,INFLATABL furnished under this contract/purchase order shall meet the material and physical requirements as specified <IN ACCORDANCE WITH THE 25 PERSON MK7 AND 50 PERSON MK8 MOD 2

INFLATABLE LIFE

RAFT/EXTERNAL SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01, March 2026.> .

3.3 First Article Approval (Contractor Testing) - First Article Test (FAT) and approval is required.

3.4 Production Lot Approval (Contractor Testing) - Production Lot Test and approval is required.

3.4.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority.

Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788.

Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor.

NIIN: 014753185 VERSION: 022 PAGE 2

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

4. QUALITY ASSURANCE

4.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01,

4.2 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.4 First Article Test/Inspection (Contractor) - The Contractor shall conduct <NON DESTRUCTIVE

Performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 Person (Mark-7) and 50 person (Mark-8) mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's> First Article Test/Inspection on <Performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 Person (Mark-7) and 50 person (Mark-8) mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's> unit(s) in accordance with requirements <Performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 Person (Mark-7) and 50 person (Mark-8) mod 2 Inflatable Lift Raft, section 4 and 6 (Verification and Quality Assurance and Notes), and DD 1423's> .

4.5 Production Lot Test/Inspection Report - The Contractor shall prepare and submit a report in accordance with the Contract Data Requirements List (DD Form 1423).

4.6 Production Lot Test (Contractor) - The Contractor shall perform 100% production testing in accordance with <DETAIL SPECIFICATION: Will be performed in accordance with External Technical Data Package (PDF), NSWCCD-83-TM-2026/01, March 2026, Technical Data Package, for the United State Navy, 25 person (Mark 7) and 50 Person (Mark-8) Mod 2 Inflatable Lift Raft, section 4 (Verification and Quality Assurance), and DD 1423's CDRL's.> .

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

5.2 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01, March 2026, Specification for the United States Navy 50 Person (Mark-8) Mod 2 Inflatable Lift Raft./>

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES

6.1 <Perform in accordance with External PDF Document NSWCCD-83-TM-2026/01,

6.2 <This manufacture requirement has an External PDF Document/ NSWCCD-83-TM-2026/01,March 2026, Specification for the United States Navy 25/Person (Mark-7) Mod 2 and 50 Person (Mark-8) Mod 2 Inflatable Lift Raft. This document is required to perform the necessary requirements. This document should be attached to solicitations/awards. If this document does not attach to the solicitation/award, sources must contact NAVSUP WSS DLA Contracting Officer to obtain a copy./>

6.3 <All comments, suggestions, or questions about the details of this TDP, and

NIIN: 014753185 VERSION: 022 PAGE 3

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

associated external documents, shall be directed to the primary contracting officer via email, or by mailing correspondence to:

DLA Weapons Support - Mechanicsburg 5450 Carlisle Pike, Bldg. 203N Mechanicsburg, PA 17050-2411>

6.4 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings.

There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows:

A... approved for public release; distribution is unlimited.

B... distribution authorized to US Governments agencies only.

C... distribution authorized to US Government agencies and their contractors.

D... distribution authorized to DoD and DoD contractors only.

E... distribution authorized to DoD Components only.

F... further distribution only as directed by Commander, Naval Sea

Systems Command, code 09T.

X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161.

6.5 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/

A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

Code 87321 5450 Carlisle Pike

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue:

Code 009 5450 Carlisle Pike

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Code 1 Support Branch

NIIN: 014753185 VERSION: 022 PAGE 4

ITEM NAME: LIFE RAFT,INFLATABL APRIL 16, 2026

700 Robbins Avenue Philadelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to

NAVSUP-WSS.

regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

FIRST ARTICLE

DI-NDTI-80809A SEE BLOCK 16 NSWCCD NORFOLK

THE CONTRACTOR SHALL SUBMIT FIRST ARTICLE INSPECTION

RESULTS IN ACCORDANCE DLA NAVSUP PCO 00 01 00

WITH THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2 INFLATABLE

LIFE RAFT EXTERNAL NAVSUP WSS N96 00 01 00

SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01, MARCH

2026 (SECTION 4). NSWCCD NORFOLK 00 01 00

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER FIRST

ARTICLE

INSPECTION/TEST HAS BEEN COMPLETED.

QUALITY CONFORM/PRODUCTION LOT

THE CONTRACTOR SHALL SUBMIT A QUALITY CONFORMANCE

INSPECTION REPORT, IN DLA NAVSUP PCO 00 01 00

ACCORDANCE WITH THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2

INFLATABLE LIFE RAFT NAVSUP WSS N96 00 01 00

EXTERNAL SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01,

MARCH2026. NSWCDD NOFOLK 00 01 00

(SECTION 4)

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER

CONFORMANCE INSPECTION

HAS BEEN COMPLETED.

1 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

MATERIAL INSPECTION

THE CONTRACTOR SHALL SUBMIT MATERIAL INSPECTION REPORT IN

ACCORDANCE WITH DLA NAVSUP PCO 00 01 00

THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2 INFLATABLE LIFE

RAFT EXTERNAL NAVSUP WSS N96 00 01 00

SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01, MARCH

2026 (SECTION 4). NSWCCD NORFOLK 00 01 00

REPORT SHALL BE SUBMITTED FIVE BUSINESS DAYS AFTER

MATERIAL INSPECTION HAS

QUARTERLY CERTIFICATION

CERTIFICATION/DATA REPORT

DI-MISC-80678 SEE BLOCK 16 NSWCCD NORFOLK

SS QTRLY ASREQ

NA C NA ASREQ

THE CONTRACTOR SHALL SUBMIT QUARTERLY LIFE RAFT

CERTIFICATION/DATA REPORTS, DLA NAVSUP PCO 00 01 00

IN ACCORDANCE WITH THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2

INFLATABLE LIFE RAFT NAVSUP WSS N96 00 01 00

EXTERNAL SPECIFICATION PDF DOCUMENT NSWCCD-83-TM-2026/01

(SECTION 3) MARCH 2026 ON A QUARTERLY BASIS, AND WITHIN NSWCCD NORFOLK 00 01 00

FIVE BUSINESS DAYS - UPON REQUEST BY THE CONTRACTING

OFFICER OR NSWCCD NORFOLK.

EACH REPORT SHALL INCLUDE THE FOLLOWING INFORMATION - FOR

EACH NEW LIFE RAFT,

TABULAR FORM/COLUMNS OR IN A SPREADSHEET FORMAT:

a. CONTRACT NUMBER

b. LIFE RAFT SERIAL NUMBER

c. DATE OF MANUFACTURE

d. DATE OF CERTIFICATION

e. MROD SERIAL NUMBER

f. PRIMARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

g. PRIMARY INFLATION VALVE MANUFACTURER AND SERIAL NUMBER

h. SECONDARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

2 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

REPORTS SHALL BE ELECTRONICALLY SUBMITTED TO THE FOLLOWING

EMAIL ADDRESS:

CRDR_LC_NavyLifeRafts@us.navy.mil

NEW LIFE RAFT

CERTIFICATION DOCUMENTATION

DI-MISC-80878 SEE BLOCK 16 NSWCCD NORFOLK

NEW LIFE LIFE RAFT ACCOMPANYING CERTIFICATION

DOCUMENTATION: DLA NAVSUP PCO 00 01 00

CONTRACTOR SHALL ENSURE THAT EACH LIFE RAFT IS SHIPPED TO NAVSUP WSS N96 00 01 00

FINAL DESTINATION

WITH ITS ASSOCIATED CERTIFICATION DOCUMENTATION, IN NSWCCD NORFOLK 00 01 00

ACCORDANCE WITH THE 25 MAN MK7 MOD 2 & 50 MAN MK8 MOD2

INFLATABLE LIFE RAFT EXTERNAL SPECIFICATION PDF

DOCUMENT NSWCCD-83-TM-2026/01, MARCH 2026 (SECTION 3).

DOCUMENTATION SHALL INCLUDE THE BELOW-LISTED INFORMATION

IN TABULAR

FORM/COLUMNS OR IN A SPREADSHEET FORMAT:

a. CONTRACT NUMBER

b. LIFE RAFT SERIAL NUMBER

c. DATE OF MANUFACTURE

d. DATE OF CERTIFICATION

e. MROD SERIAL NUMBER

f. PRIMARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

g. PRIMARY INFLATION VALVE MANUFACTURER AND SERIAL NUMBER

h. SECONDARY INFLATION CYLINDER MANUFACTURER AND SERIAL

NUMBER

3 4

Clarification of submittal dates in Items 12 and 13; Explanation of conformance with Government requirements, and the administration and required to perform additional work to conform to Government and does not require any substantial change to conform to Government production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirements to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

without conforming to Government requirements,and the administrative regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

MAINTENANCE & SERVICE MANUALS

COMMERCIAL OFF-THE-SHELF (COTS) MANUALS

DI-TMSS-80527 SEE BLOCK 16 NSWCCD NORFOLK

SS ONE/R ASREQ

NA A NA NA

THE CONTRACTOR SHALL PROVIDE SERVICE MANUAL(S) (IN

ENGLISH), TO INCLUDE DLA NAVSUP PCO 00 01 00

INSTRUCTIONS FOR INFLATING, INSPECTING, TESTING, REPAIRING

AND REPACKING THE NSWCCD NORFOLK 00 01 00

MK-7 AND MK-E LIFERAFT - IN ADDITION TO PARTS LIST

CONTAINIG ALL

REPLACEABLE/REPAIRABLE COMPONENTS, IN ACCORDANCE WITH THE

25 PERSON MK7 & 50

PERSON MK8 MOD 2 INFLATABLE LIFE RAFT EXTERNAL

SPECIFICATION PDF DOCUMENT

NSWCCD-83-TM-2026/01, MARCH 2026 (SECTION 3).

HARD COPIES OF THE SERVICE MANUAL (S) SHALL BE SUBMITTED

TO NSWCCD DETACHED

NORFOLK PERSONNEL OR THE DCMA QAR, DURING THE FAT.

ELECTRONIC COPIES OF THE SER ICE MANUAL (S) SHALL BE

EMAILED, WITHIN FIVE

BUSINESS DAYS AFTER THE FAT, TO THE CONTRACTING OFFICER ,

AND TO THE FOLLOWING

EMAIL ADDRESS: CRDR_LC_NAVYLIFERAFTS@US.NAVY.MIL

00 03 00

4 4

Clarification of submittal dates in Items 12 and 13; Explanation of

See Dod FAR Supplement