4.01b Attachment 01 - Statement of Work.pdf

STATEMENT OF WORK (SOW)

HABITABILITY PROJECT FOR USS PORT ROYAL (CG 73)

UPGRADE FOR WARDROOM, CPO, WR & WC AND SHOWER,

MAIN BDS, MER P-WAY, CPO MESS, PILOT HOUSE

1. INTRODUCTION

USS PORT ROYAL intends to purchase materials and services to upgrade the Wardroom, CPO, WR and WC Shower, Main Beds, MER P-WAY, CPO Mess and Lounge, and Pilot House. The Government will not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor, which, in turn, is responsible to the Government for successful performance of all requirements in this contract. The services provided in this requirement are incidental to the supply/materials being procured to provide the USS Port Royal Ship Habitability Project.

2. DESRIPTION OF REQUIREMENT

The objective of this contract is for the Contractor to renovate and upgrade the Wardroom, CPO, WR and WC Shower, Main Beds, MER P-WAY, CPO Mess and Lounge, and Pilot House of the USS Port Royal using Military and Federal Specifications materials.

3. SCOPE

Requirement is being solicited with the intention of awarding a Firm Fixed Price (FFP) contract. The Contractor shall provide all personnel, equipment, supplies, transportation, tools, materials, supervision necessary to perform the ship habitability requirement as defined in this SOW. Contractor shall perform to the standards in this contract without exception. The Specific Tasks are specified under Section 4. The Contractor shall provide colors and patterns three (3) days after contract award to the Technical Point of Contact (TPOC) for design of spaces.

4. SPECIFIC TASKS

4.1 Contractor shall refurbished existing display case in the WARDROOM IAW MIL-PRF 32038 and MIL-

STD-1623; fully laminated with high pressure plastic laminate Type I in accordance with the MIL-P- 17171E with shelves. Doors made with poly carbonate per CID-A-A-59202, Type II with stainless steel metal corner caps. Size: 36” W x 40” Ht. x 15” Depth

4.2 Contractor shall refurbish the existing coffee mug holder in the WARDROOM fully laminated with high pressure plastic laminate Type I IAW MIL-P-17171E. Color: TBD

4.3 Contractor shall refurbished existing sink covering in the CPO, WR & WC AND SHOWER with new high-density plastic laminate, Type II IAW MIL-P-17171.

4.4 Contractor shall prep and resurface deck in the MAIN BDS and the P-Ways, and apply primer, then apply with 2/part Dark Navy epoxy flake with white paint chips, finish with clear coat with anti-skid beads IAW NAVSEA standard item 009 & GEN SPEC 634 (clear coat) MIL-D-24613 Type l & I. Size -182 sq. ft.

4.5 Contractor shall refurbished existing bench in the MAIN BDS waiting area, re-upholster existing seats with artificial leather per CID-A-A-59517, Class 4, Condition A with Neoprene foam padding IAW MIL-PRF- 20092, Condition C. Size: 36” L x 20” W x 20” H.

4.6 Contractor shall refurbished existing door in the MAIN BDS, cut it in half to make a double half-door IAW

MIL-PRF 32038; laminated with high density plastic laminate Type II IAW MIL-P-17171 Size: 22 1/2” W x 75” H.

4.7 Contractor shall provide and install a new patient privacy curtain made with fabrics inside medical covers per commercial item Description A-A- 59517, Class 4, Condition A in the MAIN BDS. Color will be determined by Ships Force.

4.8 Contractors shall resurface existing L-Shaped counter top, bulkhead and repair drawers in CPOMESS; fully laminated with high pressure plastic laminate Type I IAW MIL-P-17171E. Color: TBD. Dimensions and number of drawers - (7) 23” length x 8” W and (2) 12” length x 7” W

4.9 Contractor shall remove and dispose existing deck covering in the CPO MESS includes deck preparation.

Install IAW MIL SPEC ASTM E648 Class 1; ASTM E 662<450 IAW MILPRF-32170; underlayment: IAW MIL-3135 Type III or IV to be installed on. Size: 450 sq. ft. Pattern: TBD. The contractor will be responsible for removing any items as appropriate to accomplish task, and then return it to its original location. A temporary storage will be provided by Ships force.

4.10 Contractors shall provide 2 new table tops with 3 CPO anchors, replace 2 existing curtains by the main entrance CPO MESS, and provide 19 seats covers per commercial item Description A-A-59517, Class 4, Condition A. Anchor will be similar to current materials and designs with water resistant material for cleaning purposes Dimensions: Table covers - 121” length x 39” W x 4” Ht. (Need 2) Curtains - 36” W x 64” Ht. (Need 3) Chair covers – (seat) 13’ length x 17’W - bottom: 20” length x 17’ W (Need 23)

4.11 Contractor shall refurbish the existing coffee mug holder in the CPO MESS fully laminated with high pressure plastic laminate Type I IAW MIL-P-17171E. Color: TBD Dimension 130 length X 10 heights

4.12 Contractor shall resurface deck in the MAIN ENGINE ROOM #2 P-WAY with2/part Dark Navy epoxy flake paint and white paint chips; apply with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634(clear coat) MIL-D-24613 Type l & II. Fix damage and rusted areas then apply underlayment and primer VLW Lightweight Underlayment conforming to military specification MIL-PRF- 3135(H) Type III, Class 2, Grade B. Size: 210sq. ft.

4.13 Contractor shall resurface deck in the PILOT HOUSE (05-149-0-C) with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II.

4.14 Contractor shall resurface deck in the PILOT HOUSE PWAY(05-166-0-L) with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II.

4.15 Contractor shall resurface deck in the SIGNAL SHELTER (05-175-0-C) with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II.

4.16 Contractor shall resurface deck in the DECK OFFICE (1-38-0-Q) with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II. Deck is 8 Feet by 12 Feet.

(Approximately 96 SQFT)

4.17 Resurface deck in the DECK P-WAY (1-28-0-Q) with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II. Deck is 12 (at the widest) 7 (at the skinniest) Feet by 25 Feet. (Approximately 336sqft)

4.18 Resurface deck in the 03-174-0-L passageway with 2/part Dark Navy epoxy flake paint and white paint chips, then apply a USS Port Royal logo center of the forward most area of the 03-174-0-L passageway, a 2M-MTR symbol in front of door to space 03-188-2-Q, an ET rating badge in front of door to space 03-199- 0-C, a CTT rating badge in front of door to space 03-224-0-C, and a FC rating badge in front of door to space 03-234-0-Q with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II.

4.19 Resurface deck in the RADIO P-way with 2/part Dark Navy epoxy flake paint and white paint chips, then apply rating badge with clear coat and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D-24613 Type l & II. Placed in front of the phone boxes.

4.20 Resurface deck in the RADIO HEAD (02-228-2-L) with 2/part Dark Navy epoxy flake paint and white paint chips and anti-skid beads IAW NAVSEA standard item 009 &GEN SPEC 634 (clear coat) MIL-D- 24613 Type l & II.

5. WORK LOCATION

Coordinate renovation and installation schedule with USS PORT ROYAL’s Technical Point of Contact (TPOC) – LTJG Yoto Tetena. Work will be performed onboard USS PORT ROYAL, Pearl Harbor, HI. Base. Base access shall be coordinated USS PORT ROYAL's TPOC: LTJG Yoto Tetena

6. WORK HOURS/SCHEDULE

6.1 Regular working hours shall consist of an 8-hour period, between 0900 am and

1800 Monday - Friday, excluding Government holiday(s). No regular work on Saturday(s) and Sunday(s).

6.2 Work outside regular working hours requires USS PORT ROYAL's POC: LT Calvin Do

(USS PORT ROYAL's SUPPO) approval.

6.3 Specific work schedule and sequence of work will be coordinated closely with LT Calvin Do (USS PORT ROYAL's SUPPO)

6.4 Contractor can begin work upon agreed up schedule.

7. SECURITY REQUIREMENTS

7.1 USS PORT ROYAL's will provide a security briefing to all Contractors’ personnel prior to commencement of work. The Contractor shall provide pictured ID laminated cards for all Contractor personnel. All Contractors’ personnel will be required to posses visitor badges while on-site.

7.2 USS PORT ROYALs shall provide escorts for Contractors if escorts are required for personnel entering, departing, and working on restricted areas.

7.3 Contractor's employees performing services shall comply with all of USS PORT ROYAL's rules and regulations applicable to safety, security, and procedures governing site entry and exit USS PORT ROYAL’s Security point of contact is USS PORT ROYAL's POC: LT Calvin Do.

8. BASE ACCESS

Any new Contractor, vendor, or supplier requesting base access will be required to obtain a Defense Biometric Identification System (DBIDS) credential.

8.1 DBIDS increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and Force Protection Conditions (FPCONs). The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point.

8.2 The following is required to get a DBIDS credential:

8.2.1 Present a completed JB2 0-180 Form from the government sponsoring organization that provides the purpose for your access.

8.2.2 Present valid identification, such as a passport or Real ID Act-compliant state driver's license. The Visitor Control Center (VCC) will pull up your information in the computer, ensuring all information is current and correct.

8.2.3 Present a completed SECNAV 5512/1 form to obtain your background check.

8.2.4 Upon completion of the background check, the VCC representative will complete the DBIDS enrollment process, which includes your photo, fingerprints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

For more information see link provided: https://www.cnic.navy.mil/om/dbids.html

9. POINT OF CONTACT

9.1 POC: LT Calvin Do (USS PORT ROYAL's SUPPO) approval.\

Email: suppo@cg73.navy.mil

9.2 TPOC: LTJG Yoto Tetena

Email:

yoto.tetena@cg73.navy.mil Phone:

(808) 474-9298

10. PERIOD OF PERFORMANCE:

21 December 2021 through 31 December 2021