GARVEL_GRID_SYSTEM_RQMT_DEPARTMENT OF HOMELAND SECURITY UNITED STATES COAST GUARD (002).docx

DOCX document 17 KB Posted

Attached to
USCG Solicitation #: 37570PR240000015 Description: USCG GARVEL GRID SYSTEM
Solicitation number
37570PR240000015
Issued by

About this file

This document is a Scope of Work for a federal contract opportunity issued by the Department of Homeland Security United States Coast Guard. The requirements are for the contractor to supply 18 rolls of 4ft x 150ft injection-molded, nested-honeycomb, rolled-plastic-panel gravel pavers to cover a surface area of 10,800 square feet. Key specifications include the paver material, size, wall thickness, cell shape and size, and compressive strength. The delivery location is the USCG facility in Valdez, Alaska, and the required delivery date is 14 weeks from contract award. This is a lowest price, technically acceptable procurement under FAR 13 simplified acquisition procedures. The contractor will be responsible for all shipping costs to the delivery location, and any damages caused by fault or negligence. Proposals/quotes are due no later than 3:00 PM Alaska time on August 26, 2024.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF HOMELAND SECURITY UNITED STATES COAST GUARD

825 HANAGIA ST

VALDEZ, ALASKA 99686

SCOPE OF WORK: Contractor shall SUPPLY THE ATTACHED REQUIRMENT.

INCLUDE THE SHIPPING COST (FOB DESTINATION) IN ANY COST PROPOSAL

DELIVERY LOCATION

• USCG 825 HANAGRITA ST

ATTN: PO1, DANIEL ARMSTRONG

VALDEZ , AK 99686

• 14 weeks from date of RECEIPT OF CONTRACT AWARD IS REQUIRED DELIVERY DATE REQUIREMENT: Specifications for Garvel Grid System Requirement: 18 rolls that are 4Ft x 150Ft to cover a surface area of 10,800SqFt Specifications:

1.Injection-molded, nested-honeycomb, rolled-plastic-panel gravel pavers for permeable,gravel paved environments.

2. Load-transfer paving system.

3. Use full rigid base coarse to prevent pavers from being pressed into subbase.

4. Material: Polyolefin plastic with carbon black for UV stabilization.

a. Black Gravel Pavers: 100 percent recycled material.

b. Colored Gravel Pavers: Virgin material.

5. Recyclable Content: 100 percent.

6. Paver Size: Preassembled rolls comprised of 3.870ft x 150ft rolls by 1 inch high with integrated connecting cross links.

7. Wall Thickness: 0.12 inch.

8. Cells:

a. Number per Paver: 72.

b. Shape: Hexagon.

c. Size: 2-1/4-inches.

d. Form: Nested honeycomb.

9. Top Surface of Pavers: Smooth, without notches or grooves.

10. Connections:

a. Connecting Clips per Paver: 24.

b. Between Panels to Form Rolls: End-to-end clips snap-lock together.

c. Between Rolls: Side-to-side clips snap-lock together.

11. Bottom Open Area:

a. 100 percent geotextile filter fabric.

b. Total Area per Paver: 478 square inches

12. Paver Color: [Black] [Gray] [Tan] [Brick Red].

13. Paver Compressive Strength, Empty Cells: 57,888 psf.

14. Nominal Coverage Area per Paver: 4 square feet.

15. Weight per Paver: 2.32 pounds.

16. Chemical Resistance: Superior chemical resistance; totally inert.

17. Geotextile Filter Fabric:

a. Nonwoven, spunbonded, continuous-filament, polypropylene filter fabric.

b. Thermally bonded to gravel paver bottom surface.

c. Grab Tensile Strength: 110 lbs.

d. Puncture Resistance: 30 lbs.

e. Apparent Opening Size (AOS), US Sieve Number: 50.

f. Permeability: 0.05 cm/sec.

g. Water Flow Rate: 95 gal/min/sf.

h. UV

GOVERNMENT FURNISHED EQUIPMENT: N/A

7. Delivery Schedule The contractor shall deliver to location / FOB DESTINATION within [specified time frame] from the date of contract award.

NOTE: This requirement is lowest priced, Technically Acceptable (LPTA) in accordance with FAR 13 simplified Acquisition Procedures.

ANY SHIPPING COSTS TO REQUIRED DELIVERY ADDRESS SHALL BE INCLUDED IN FINAL CONTRACTORS PRICED QUOTE.

LIABILITY OF DAMAGES: The contractor shall be liable for all damages to Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur because of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers the public, and the property of others.

8. Payment Terms Payment terms will be as specified in subsequent purchase order/ contract award documentation.

9. Point of Contact For any questions or clarifications regarding this requirement, please contact one of the individuals at least 10 business days before closing date/time of this REQUEST FOR PROPSAL (RFP).

NOTE: ALL PROPOSALS/ QUOTES SHALL BE SUBMITTED ONLY VIA THE FED BIZZ MARKETPLACE APPLICATION.

Closing date & time: proposals/quotes and any supporting documentation SHALL BE RECEIVED NO LATER THAN 3:00 PM ALASKA TIME ZONE ON Monday, 26 AUGUST 2024.

Deno Stamos Senior Field Contracting officer (SFCO)

USCG KETCHIKAN

Deno.a.stamos@uscg.mil 907-228-0270

File details come from the government source that posted it. Updated .