P02 - Sources Sought Notice - Coatesville EHRM.pdf

Sources Sought Notice

SUBJECT* 542-22-700 | EHRM Construct Infrastructure Upgrade | Coatesville, PA

GENERAL INFORMATION

CONTRACTING OFFICE’S ZIP CODE* 44131

SOLICITATION NUMBER* 36C77626Q0138

RESPONSE DATE/TIME/ZONE 10-26-2026 2:00PM EASTERN TIME, NEW

YORK, USA

ARCHIVE 90 DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS N

SET-ASIDE SDVOSBC

PRODUCT SERVICE CODE* Z1DA

NAICS CODE* 236220

CONTRACTING OFFICE ADDRESS Department of Veterans Affairs

Program Contracting Activity Central

6100 Oak Tree Blvd, Suite 490

Independence OH 44131

POINT OF CONTACT*

Contract Specialist

Sadaya.Brittian@va.gov

Contracting Officer

Samantha.Mihaila@va.gov

PLACE OF PERFORMANCE

ADDRESS Coatesville VA Medical Center

1400 Blackhorse Hill Road

Coatesville PA

POSTAL CODE 19320-2096

COUNTRY USA

ADDITIONAL INFORMATION

AGENCY’S URL

URL DESCRIPTION

AGENCY CONTACT’S EMAIL ADDRESS

EMAIL DESCRIPTION

DESCRIPTION

SYNOPSIS:

INTRODUCTION:

This Sources Sought Notice is for market research and information purposes only at this time and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs (VA).

The Department of Veterans Affairs, Veterans Health Administration (VHA), Program Contracting Activity Central (PCAC) is conducting a market survey and is seeking potential sources for the EHRM Infrastructure Upgrades Construction project at the Coatesville VA Medical Center – located in Coatesville, PA.

PROJECT DESCRIPTION:

Contractors shall completely prepare site for building operations, including demolition and removal of existing structures, and furnish labor and materials and perform work for EHRM Infrastructure Upgrades - Coatesville as required by drawings and specifications.

All installed cables shall be terminated at each end and documentation, labeling, and (where applicable) test results provided. This applies to all permanently installed cable types. Building fiber will be plenum rated OM4 and OS2-10GB.In addition to replacing all of the communications cabling, an additional 20% capacity, in terms of cable count, shall be provided as shown on the drawings and specifications. All Copper replacement will be CAT 6A. CAT 6A Patch Cords shall be provided and installed for all locations, including patch cords at the End User Device and at the TR.

PROCUREMENT INFORMATION:

The proposed project will be a competitive, firm-fixed-price contract utilizing the design-bid-build approach (Final Specifications and Drawings will be provided). The anticipated solicitation will be issued either as a Request For Proposal (RFP) in accordance with FAR Part 15, considering Technical (ex. Project Experience) and Price Factors or as an Invitation for Bid (IFB) in accordance with FAR Part 14, considering Price only. The results and analysis of the market research will finalize the determination of the procurement method. The type of socio-economic set-aside, if any, will depend upon the responses to this notice and any other information gathered during the market research process.

This project is planned for advertising in late December 2026. In accordance with VAAR 836.204, the magnitude of construction is between $20,000,000.00 and $50,000,000.00 (Note that the VAAR magnitude of construction is closer to the lower end of this range). The North American Industry Classification System (NAICS) code 236220 (size standard $45.0 million) applies to this procurement. The duration of the project is currently estimated at 770 calendar days from the issuance of a Notice to Proceed. The services for this project will include providing all construction related services such as: providing labor, materials and equipment required to complete the project as per contract documents prepared by an independent Architect-Engineer firm.

CAPABILITY STATEMENT:

Respondents shall provide a general capabilities statement to include the following information:

Section 1: Provide company name, Unique Entity Identifier (UEI), company address, Point-of- Contact name, phone number and email.

Section 2: Provide company business size based on NAICS code 236220. Also, provide business type (i.e., Large Business, Small Business, Service-Disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-Owned Small Business, Hub Zone Small Business, etc.).

Section 3: Provide a Statement of Interest in the project.

Section 4: Provide the prime contractor’s available bonding capacity in the form of a letter of intent from your bonding company with this submission. *Please ensure that the individual bonding capacity is in line with the VAAR Magnitude of Construction listed above.

Section 5: Provide the type of work your company has performed in the past in support of the same or similar requirement. This section is IMPORTANT as it will help to determine the type of socio-economic set-aside, if any. Please provide the following in your response:

Offerors shall provide examples of prior experience on a minimum of two (2) and a maximum of five (5) relevant construction projects. To be deemed relevant projects shall be at least 75% complete within six (6) years preceding the RFP posting date. Projects must have been performed at an operational medical facility and, when viewed collectively, must demonstrate experience in all the technical areas listed below. (Note: The required technical elements may be distributed across the submitted projects, provided all elements are represented within the 2

- 5 project submission limit.)

• Performance on at least two (2) construction project that are at least $20M in value performed in an occupied medical facility [at least two (2) relevant examples required] NOTE: For purposes of Market Research, if you do not have projects of at least $20M, please submit the closest value that you have of projects performed in an occupied medical facility.

• Performance on a construction project requiring uninterrupted service lines, such as an emergency or surgical environment, with use of infection control permits and barriers. [at least one (1) relevant example required]

• Performance on a construction project that executed the specified phasing identified in a CD package. [at least one (1) relevant example required]

• Performance a construction project that primarily consisted of off-hours work. [at least one (1) relevant example required]

• Performance with mechanical, electrical, plumbing, and telecommunications infrastructure. [at least one (1) relevant example required]

• Performance dealing with work that would cause interruptions of facility utilities and/or tying-in to existing structures. [at least one (1) relevant example required]

• Performance with on-site work installing fiber optic cable in an occupied medical facility.

[at least one (1) relevant example required]

• Performance with phasing of telecommunication work resulting in seamless switch over from old to new system. [at least one (1) relevant example required]

Section 6: Project Labor Agreement (PLA) - A PLA is defined as a pre-hire Collective Bargaining Agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. 158(f). The PLA questionnaire must be filled out and returned with the Sources Sought response. The questionnaire can be found at the end of this document.

In accordance with Federal Acquisition Regulation (FAR) 22.5 - Labor Agreements for Federal Construction Projects, Policy:

(a) Project Labor Agreement (PLA) is a tool that agencies may use to promote economy and efficiency in Federal procurement. Pursuant to Executive Order (E.O.) 14063, Use of Project Labor Agreements for Federal Construction Projects, requires agencies to use project labor agreements in large-scale construction projects.

(b) An agency may, if appropriate, require that every contractor and subcontractor engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will-

(1) Advance the Federal Government's interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards, and other matters; and

(2) Be consistent with law.

(c) Agencies may also consider the following factors in deciding whether the use of a project labor agreement is appropriate for the construction project:

(1) The project will require multiple construction contractors and/or subcontractors employing workers in multiple crafts or trades.

(2) There is a shortage of skilled labor in the region in which the construction project will be sited.

(3) Completion of the project will require an extended period of time.

(4) Project labor agreements have been used on comparable projects undertaken by Federal, State, municipal, or private entities in the geographic area of the project.

(5) A project labor agreement will promote the agency’s long term program interests, such as facilitating the training of a skilled workforce to meet the agency’s future construction needs.

(6) Any other factors that the agency decides are appropriate.

See FAR Provision: 52.222-33 Notice of Requirement for Project Labor Agreement and FAR Clause 52.222-34 Project Labor Agreement for further details.

It is requested that interested contractors submit a response (electronic submission) of no more than twelve (12) single sided pages, single-spaced, 12-point font minimum that addresses the above information (this is inclusive of the PLA questionnaire). This response must be submitted as a single application-generated (not scanned) PDF document that is less than or equal to 4MB in size. Please note that hard copies will not be accepted. Please also include a cover page, which includes, at a minimum: the company’s name, address, Unique Entity Identifier (if available), socio-economic status, point-of-contact name, phone number, and e-mail address.

Responses must include the Sources Sought number and project title in the subject line of their e-mail response. Submissions (responses) shall be submitted via email to the primary point of contact listed below by October 26, 2026, at 2:00pm EDT. No phone calls will be accepted.

The Capabilities Statement submitted in response to this Sources Sought shall not be considered to be a bid or proposal. This notice is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. No evaluation letters and/or results will be issued to the respondents. After completing its analyses, the Government will determine whether to limit competition among the small business categories listed above or proceed with full and open competition as other than small business.

At this time no solicitation exists; therefore, please do not request a copy of the solicitation. If a solicitation is released it will be synopsized in Contract Opportunities at https://sam.gov/. It is the potential offeror's responsibility to monitor this site for the release of any solicitation or synopsis.

Contracting Office Address:

VHA Program Contracting Activity Central (VHA-PCAC) 6100 Oak Tree Blvd. Suite 300 Independence, OH 44131

Primary Point of Contact:

Sadaya Brittian Contract Specialist Sadaya.Brittian@va.gov

Secondary Point of Contact Samantha Mihaila Contracting officer Samantha.Mihaila@va.gov https://sam.gov/ mailto:Sadaya.Brittian@va.gov mailto:Samantha.Mihaila@va.gov