RFI Dental LED Curing Lights Cordless.pdf

PDF 164 KB Posted

Download PDF, 164 KB

Attached to
6515--Curing Lights
Solicitation number
36C26227Q0120
Issued by

About this file

Request for Information (RFI) / Sources Sought Notice Summary

This is a Request for Information (RFI) and Sources Sought Notice issued by the Department of Veterans Affairs (VA) Long Beach Healthcare System for cordless dental LED curing lights. The RFI is for information and planning purposes only and does not constitute a solicitation or binding contract. The VA is seeking 17 units of VALO XG (Part # 6383) or equal products from qualified sources to support dental restorative procedures at the facility. Responses must be submitted via email to wilbert.parks@va.gov no later than Monday, November 23, 2026 by 4:00 PM PST. The government will use responses solely for market research and acquisition planning; submission of responses does not place respondents on a prospective bidders list or guarantee receipt of future solicitations.

The salient characteristics require that curing lights be cordless with rechargeable batteries, capable of curing and setting permanent restorations in less than three seconds, accommodate a tooth-size lens with a minimum 12 mm diameter, and be sourced from recognized dental equipment manufacturers or supply vendors. The RFI includes 18 detailed questions addressing capabilities, business size status (including NAICS 339112 with 1,000 employee threshold), small business certifications, subcontracting compliance, Commercial-Off-The-Shelf (COTS) status, FDA clearance, Federal Supply Schedule contract availability, lead times, product lifespan, leasing options, and pricing. Additionally, respondents must address Buy American Act compliance, including country of origin, domestic content percentage, manufacturer location, and availability of domestic alternatives. Pricing information is encouraged for market research purposes only and will not be used for award evaluation.

View the file

On GovTribe

Work with this file

  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED

SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION.

SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND

CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR

PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e).

DISCLAIMER

This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly.

IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.

SOURCES SOUGHT/RFI DESCRIPTION

This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this

Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this Sources

Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published.

The Department of Veterans Affairs (VA) is seeking sources capable of providing Curing Lights that can address the attached list of DRAFT requirements the Long Beach Veterans Affairs Health Care System.

The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required.

BRAND NAME/PART#/QUANTITY

• VALO XG/ # 6383 /17 EA

EQUAL TO PRODUCT

Dental LED Curing Lights, Cordless

Salient Characteristics

1. System compatibility and indication for use

• Curing Lights must be intended for use in dental restorative procedures, including the curing and setting of composite fillings, crowns, and other permanent restorations.

• Curing lights must be sourced from a recognized dental equipment manufacturer or dental supply vendor.

• Equipment shall support clinical use at the VA Long Beach Healthcare System Dental

Service for providing restorative dental treatment to Veterans.

2. Performance requirements

• Curing lights must be capable of curing and setting permanent restorations in less than three (3) seconds to help minimize the risk of contamination.

• Curing lights must be cordless.

• Curing lights must be equipped with rechargeable batteries.

• Curing lights must accommodate a tooth-size lens measuring a minimum of 12 mm to provide broader coverage.

3. Vendor Requirements

• Curing lights must be sourced from a recognized dental equipment manufacturer or dental supply vendor.

4. Clinical Need

• The VA Long Beach Healthcare System requires curing lights to support the placement of fillings, crowns, and other permanent dental restorations for Veterans.

If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions:

(1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of

DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain.

For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement.

(2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A.

(3) Please indicate the size status and representations of your business, such as but not limited to:

Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business

(VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc.

(4) Is your company considered small under the NAICS code identified in this RFI?

(5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT

CHARACTERISTICS/SOW?

(6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available).

(7) If you’re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified.

(8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6?

(9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items?

(10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-

Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice?

(11) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate.

(12) What is estimated life span of your solution? What support/services does that entail?

(13) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained.

(14) Does your organization offer a leasing solution? Please elaborate.

(15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s).

(16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract.

(17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award.

(18) Please provide your SAM.gov Unique Entity ID/Cage Code number.

Buy America Compliance

Respondents shall provide sufficient detail to determine compliance with the Buy American Act, including country of origin, domestic content, and availability of domestic alternatives. Responses should be complete and supported with verifiable information.

1. Please identify the country of origin for the end product(s) being offered. Include the location of final assembly/manufacture.

2. Please provide the percentage of domestic content (by cost) for each product(s). Describe the origin of the major components.

3. Does your product qualify as a “domestic end product” in accordance with the Buy

American Act?

4. If the proposed product is not compliant, are you able to provide a BAA-compliant domestic alternative?

5. Please identify the manufacturer name and location for the product(s). Confirm whether the manufacturer is U.S.-based.

6. Identify the country of origin of each product and indicate whether the product qualifies as a U.S.-made or designated-country end product in accordance with the Trade Agreements

Act

Responses to this notice shall be submitted via email to wilbert.parks@va.gov. Telephone responses will not be accepted. Responses must be received no later than Monday, November 23, 2026 by 4:00 PM PST.

All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this

Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.

File details come from the government source that posted it. Updated .