Equipment Specifications.pdf

The GP-2000CS is a high performance, externally piloted reducing valve for large capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high Cv, the GP-2000CS is reliable and accurate (+/-1%

GP-2000CS CD2248

Stainless Steel

A

A

PP

LI

C

AT

IO

N S

FFEATURES

Tel: 910-735-0000 s Fax: 910-738-3848 s titan@titanfci.com s www.titanfci.com 290 Corporate Drive s PO Box 7408 s Lumberton, NC 28358

"Y" (WYE) STRAINER f FLANGED ENDS, RAISED FACE

ANSI CLASS 150 f CARBON AND STAINLESS STEEL

PRESSURE/ TEMPERATURE RATING

CS - ASTM A216 GR. WCB - CLASS 150

WOG (Non-shock): 285 PSI @ 100 °F

PRESSURE/ TEMPERATURE RATING

SS - ASTM A351 GR. CF8M - CLASS 150

WOG (Non-shock): 275 PSI @ 100 °F

C A R B O N S T E E L P RO P ERT I ES: C A R B O N S T E E L P E R F O R M S E XC EP T I O N A L LY W E L L I N H I G H T E M P E R AT U R E S , U P TO 800°F I N

C O N T IN UO U S S ERV I CE . I T P ROV I D E S H I G H R E S I S TAN CE TO SH O CK , V I B R AT I O N, P I P I N G S T R A I N S , A N D F I R E A N D F R E E Z I N G

H A Z A R D S . C A R B O N S T E E L S T R A I N E R S A R E O F T E N U S E D I N T H E O I L A N D P E T RO C H E M I C AL I N D U S T R IE S .

S TA I NL E S S S T E E L P RO P ERT I ES : S TA I N L E S S S T E E L I S CO M M O N LY S P E C I F I E D F O R H I G H T E M P E R AT U R E S ERV I CE , U P TO

1000°F I N C O N T IN U OU S S ERV I CE . S TA I N L E S S S T E E L S T R A I N ER S A R E C O M M ON LY F O U N D I N T H E CH E M I C A L , F O OD, A N D

P H A R M ACE U T I C A L I N D U ST R I E S .

TTECHNICAL

MODELS: YS 61-CS

(C A R BO N S TE E L )

YS 61-SS

( S TA I N L E S S S TE E L )

YS61-1215

s N E W D ES I G N W I T H G A UG E TA P S

T I TA N 'S YS 61 H A S C O N V E N I E N T G AU G E TA P S F U R N IS H E D W I T H A P L U G O N B OT H T H E

I N L E T A N D O U T L E T S I D E S OF S IZ E S 2" T H RO U G H 24". T H E SE TA P S A L L OW F O R E A S Y

I N S TAL L AT I ON O F P R E S SU R E G AU G E S TO M ON ITO R D I F F E R E N T I A L P R E S S U R E A N D

D E T E R M I N E W HE N S C R E E N C L E A N IN G I S N EC E S S A RY .

s L A R G E S T R A I N I N G C A PAC I T Y

W I T H I T S L A R G E B O DY A N D S I ZA B L E S T R A I N IN G E L E M E N T , T H E YS 61 P ROV I D E S E X C E L L E N T

O P E N A R E A R AT IO S T H AT A R E T Y P I C A L LY T WO-A N D-A-H A L F T I M E S L A R G E R T H A N T H E

C OR R E S P O N D I N G P I P E L I N E .

s P R E C I S I O N M AC H I NE D S E AT S

P R E C I S I ON M AC H I N ED S C R E E N S EAT S I N B OT H T H E B O DY A N D C A P H E L P TO E N S U R E

AC C U R AT E P O S IT I O N I N G O F T H E S CR E E N D U R I N G R E A S S E M B LY A F T E R C L E AN IN G. A L S O , T H E M AC H I N E D B O DY S EAT S E N A B L E F I N E R F I LT R AT IO N B Y P R E V E N T I N G D E B R I S B Y PA S S .

s S E L F-C L E A N I N G C A PA B I L I T Y

W I T H A TA P P E D N P T B L OW-O F F C O N N E CT I O N, T H I S U N I T C A N B E F I T T E D W I T H A B L OW- D OW N VA LV E W H I C H FAC I L I TAT ES C L E A N I N G O F T H E S T R A I N I N G E L E M E N T . P L EA S E

C ON TAC T FAC TO RY F O R M O R E I N F O R M AT I O N .

s E P OX Y PA I NT E D

C A R B ON S T E E L U N I T S A R E E P OXY PA IN T E D TO H E L P R E S I S T RU S T A N D C O R RO S I O N. T I TA N

F C I A L S O O F F E R S E P OX Y C OAT I N G A S A N O P T I O N F O R T H E YS 61.

s O P T I O N A L C OV E R D ES I G N S

T I TA N 'S YS 61 I S AVA IL A B L E W I T H D I F F E R E N T C OV E R O P T I ON S I N C L U D I N G S W IN G, C L A M P , A N D H I N G E T Y P E C OV E R S . P L EA S E C ON SU LT FAC TO RY F O R M O R E I N F O R M AT I ON O N T H E S E

O P T I O N S .

Gauge Taps

NEWLY DESIGNED...

STANDARD ON ALL

YS 61 MODELS IN

SIZES 2" ~ 24"

SIZE RANGE: 1/2" ~ 24"

290 Corporate Drive E-mail: titan@titanfci.com Lumberton, NC 28358 Web: www.titanfci.com Tel: 910.735.0000 Fax: 910.738.3848

ANSI Class

YS61-1215

PRESSURE - TEMPERATURE RATINGS

BILL OF MATERIALS (1)

No. PART YS 61-CS (6) YS 61-SS

1 Body (2) Carbon Steel A216 Gr. WCB

Stainless Steel A351 Gr. CF8M

2 Cover Carbon Steel A216 Gr. WCB

Stainless Steel A351 Gr. CF8M

Straining Element (3) Stainless Steel Stainless Steel

4 Gasket (3) (4) Stainless Steel Spiral Wound

Stainless Steel Spiral Wound

5 Studs Alloy Steel Stainless Steel

6 Nuts Alloy Steel Stainless Steel

NPT Plug Blow-off

Carbon Steel Stainless Steel

NPT Plug Gauge Taps (5) Carbon Steel Stainless Steel

1. Bill of Materials represents standard materials. Equivalent or better materials may be substituted at the manufacturer's discretion.

2. Available in additional body materials, such as LCB, WC6, WC9, 316L, Alloy 20, and Monel.

3. Denotes recommended spare parts.

4. A wide range of gasket materials are available; contact factory for more information.

5. Part number 8 (NPT Plug - Gauge Taps) only applies to sizes 2" through 24".

6. Carbon Steel bodies are epoxy painted.

WYE STRAINER

YS 61-CS - (Carbon Steel)

YS 61-SS - (Stainless Steel)

2. Face to face dimension includes raised face. These values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for sizes 12" and larger.

DIMENSIONS AND PERFORMANCE DATA (1)

SIZE

in ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 mm 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

A DIMENSION

FACE TO FACE (2)

in 6.50 7.37 7.37 7.00 7.12 7.87 9.75 10.06 12.12 15.62 18.50 21.37 26.00 29.87 36.00 41.75 46.00 49.50 58.37 mm 166 188 188 178 181 200 248 256 308 397 470 543 661 759 914 1060 1168 1257 1483

B DIMENSION

CENTER LINE TO BOTTOM

in 3.50 3.75 3.75 4.75 4.75 5.25 6.50 7.00 8.25 11.25 13.50 15.50 18.50 22.25 25.00 26.50 31.00 39.00 45.00 mm 89 96 96 121 121 134 166 178 210 286 343 394 470 566 625 673 787 991 1143

C DIMENSION

SCREEN REMOVAL

in 5.00 5.00 5.00 7.00 7.00 7.00 9.75 10.00 12.00 20.00 20.00 22.75 28.00 30.00 36.50 42.00 45.50 56.00 68.00 mm 127 127 127 178 178 178 248 254 305 508 508 578 712 762 927 1067 1156 1422 1727

D NPT Plug

BLOW-OFF

in 3/8 1/2 1/2 1/2 1/2 1/2 1 1 1 1/2 2 2 2 2 2 2 2 2 2 2 mm 10 15 15 15 15 15 25 25 40 50 50 50 50 50 50 50 50 50 50

E NPT Plug

GAUGE TAPS

in N/A N/A N/A N/A N/A 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 mm N/A N/A N/A N/A N/A 8 8 8 8 8 8 8 8 8 8 8 8 8 8

ASSEMBLED WEIGHT

APPROXIMATE

lb 5.5 10.3 10.3 12.0 12.5 21.0 32.0 35.0 55.0 90.0 140.0 220.0 356.0 644.0 1000 1090 2400 2700 3340 kg 2.5 4.6 4.6 5.4 5.7 9.5 14.5 15.9 24.9 40.8 63.5 99.7 161.5 292.1 453.6 494.4 1089 1225 1515 Cv C/F C/F C/F C/F 42 70 110 160 260 400 570 950 1600 2200 3300 4900 6100 8000 11000

Exploded View

PRESSURE - TEMPERATURE RATING

Body Material A216 Gr. WCB A351 Gr. CF8M

WOG (Non-shock): 285 PSI @ 100 °F 275 PSI @ 100 °F

STANDARD SCREEN SELECTIONS

Size Liquid Open Area Steam Open Area

1/2" - 4" 1/16 (.0625) 41% 1/32 (.033) 28%

5" - 8" 1/8 (.125) 40% 3/64 (.045) 36%

10" - 12" 1/8 (.125) 40% 30 Mesh Lined 44.8%

CODE DESCRIPTION

ASME/ANSI B16.5 Pipe Flanges and Flanged Fittings

ASME/ANSI B16.34 Flanged, Threaded, and Welding End

"Y" (WYE) STRAINER f THREADED AND SOCKET WELD

ASME CLASS 600 f CARBON AND STAINLESS STEEL

YS8182-0614

s B O LT E D A N D C A P C OV E R D ES I G N S

T I TA N † U N I T S YS 81B C AN D YS 82B C S I ZE S 2½" A N D 3" H AV E A B O LT E D C OV E R A S S TA N DA R D.

A N O P T I O N A L B O LT E D C OV E R I S A L S O AVA I L A B L E O N S IZ E 2" . C A P C OV E R S A R E

S TA N DA R D O N YS 81 A N D 82 S IZ ES ¼" - 1½" .

s RU G G ED - H I G H Q UA L I T Y D ES I G N

T H E YS 81 A N D YS 82 A R E I D E A L F O R P E T RO C H E M I C A L A N D OT HE R D E M A N D I N G I N D U S T R IA L A P P L I C AT I O N S T H AT H AV E H IG H ER P R E S SU R E A N D T E M P E R AT U R E R E Q UI R E M E N T S .

s L A R G E S T R A I N I N G C A PAC I T Y

W I T H I T S L A R G E B O DY A N D S I Z A B L E S T R A I N IN G E L E M E N T , T H E YS 81 A N D YS 82 P ROV I D E E X C E L L E N T O P E N A R EA R AT IO S T H AT A R E T Y P IC A L LY T WO-A N D-A-H A L F T I M E S L A R G E R

T H A N T H E C OR R E S P O N D I N G P I P E L I N E .

s P R E C I S I O N M AC H I NE D S E AT S

P R E C I S I ON M AC HI N E D S C R E E N S EAT S I N B OT H T H E B O DY A N D C A P H E L P TO E N S U R E

AC C U R AT E P O S IT I O N I N G O F T H E S CR E E N D U R I N G R E A S S E M B LY A F T E R C L E AN IN G. A L S O , T H E

M AC HI N E D B O DY S EAT S E N A B L E F I N E R F I LT R AT I O N B Y P R E V E N T I N G D E B R I S B Y PA SS .

s S E L F-C L E A N I N G C A PA B I L I T Y

W I T H T H E O P T I O N A L S O C K E T W E L D B L OW-O F F C ON N E C T I ON , T H I S U N I T C A N B E F I T T E D

W I T H A B L OW-D OW N VA LV E W H I C H FAC I L I TAT E S C L E A N I N G O F T H E S T R A I N I N G E L E M E N T .

P L E A S E C ON TAC T FAC TO RY F O R M O R E I N F O R M AT I ON .

s E P OX Y PA I NT E D

C A R B ON U N I T S A R E E P OX Y PA IN T E D TO H E L P R E S I S T RUS T A N D C OR ROS I ON. T I TA N F C I

A L S O O F F E R S E P OXY C OAT I N G. P L E A S E C ON TAC T FAC TO RY F O R M O R E I N F O R M AT I ON .

TTECHNICAL

A

A

PP

LI

C

AT

IO

N S

FFEATURES

C A R B O N S T E E L P RO P ERT I E S: C A R B ON S T E E L P E R F O R M S E XC E P T I O N A L LY W E L L I N H I G H T E M P ER AT U R E S , U P TO 800°F

I N C ON T I N U O US S E RV IC E . I T P ROV I D ES H I G H R E S I S TAN CE TO S H O C K , V I B R AT IO N , P I P I N G S T R A I N S , A N D F I R E A N D

F R E E Z I N G H AZ A R D S . C A R B ON S T E E L S T R A I N E R S A R E O F T E N U S E D I N T H E O IL A N D P E T RO C H E M IC A L I N D U S T R IE S

S TA I NL E S S S T E E L P RO P ERT I E S : S TA I N L E S S S T E E L I S C OM M O N LY S P E C I F I E D F O R H IG H T E M P ER AT U R E S ERV I C E , U P TO

1000°F I N C O N T I N U O U S S ERV I C E . S TA I N L E S S S T E E L S T R A I N ER S A R E C OM M O N LY F O U N D I N T H E C H E M I C A L , F O O D, A N D

P H A R M ACE U T I C A L I N D U ST R I E S .

The above da ta represen ts common market and ser v ice app l icat i ons . No represen tat i on o r guarantee , expressed or imp l ied , i s g iven due to the numerous va r i at i ons of concen tra t ions , temperatu res and f l ow condi t ions tha t may occur dur i ng actua l ser v ice .

PRESSURE/ TEMPERATURE RATING

CS - ASTM A216 GR. WCB - CLASS 600

WOG (Non-shock): 1480 PSI @ 100 °F

PRESSURE/ TEMPERATURE RATING

SS - ASTM A351 GR. CF8M - CLASS 600

WOG (Non-shock): 1440 PSI @ 100 °F

• The above listed temperatures are theoretical and may vary during actual operating conditions.

• Carbon Steel not recommended for prolonged use above 800 °F.

• Stainless Steel not recommended for prolonged use above 1000 °F.

2" YS 81BC-CS

WI T H B OLTE D C OV ER

2" YS 82-SS

WI T H C AP C OV ER

SIZE RANGE

CAP COVER: ¼ " ~ 2"

BOLTED COVER: 2" ~ 3"

MODELS: YS81-CS

(CARBON STEEL - THREADED)

YS82-CS

(CARBON STEEL - SOCKET WELD)

YS81-SS

(STAINLESS STEEL- THREADED)

YS82-SS

(STAINLESS STEEL - SOCKET WELD)

YS81/82BC

(BOLTED COVER DESIGN)

Tel: 910-735-0000 s Fax: 910-738-3848 s titan@titanfci.com s www.titanfci.com 290 Corporate Drive s PO Box 7408 s Lumberton, NC 28358

ASME Class

REFERENCED STANDARDS & CODES

CODE DESCRIPTION

ASME B1.20.1 National Pipe Thread Taper

ASME B16.11 Forged Steel Fittings, Socket-Welding & Threaded

ASME B16.34 Flanged, Threaded, and Welding End

YS8182-0614

PRESSURE - TEMPERATURE RATING

Body Material A216 Gr. WCB A351 Gr. CF8M

WOG (Non-shock): 1480 PSI @ 100 °F 1440 PSI @ 100 °F

DIMENSIONS AND PERFORMANCE DATA (1)

SIZE

in 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 (3) 2 1/2 (4) 3 (4) mm 8 10 15 20 25 32 40 50 65 80

A DIMENSION

THREADED COVER

in 2.93 2.93 2.93 3.68 4.56 4.93 5.56 6.93 n/a n/a mm 75 75 75 94 116 126 142 177 n/a n/a

A DIMENSION in

B O LT E D C O V E R N OT AVA I L A B L E I N S I Z E S ¼ " - 1 ½ "

7.50 12.00 12.00 BOLTED COVER mm 191 305 305

B DIMENSION

CENTER LINE TO BOTTOM

in 2.37 2.37 2.37 2.81 3.68 4.12 4.75 6.00 10.50 10.50 mm 61 61 61 72 94 105 121 153 267 267

C DIMENSION

SCREEN REMOVAL

in 2.62 2.62 2.62 3.37 4.75 5.25 6.00 7.25 16.00 16.00 mm 67 67 67 86 121 134 153 184 407 407

D NPT Plug

BLOW-OFF

in 1/4 1/4 1/4 3/8 3/8 3/4 3/4 1 1 1/4 1 1/4 mm 8 8 8 10 10 20 20 25 32 32

APPROXIMATE

ASSEMBLED WEIGHT

lb 1.5 1.5 1.5 2.5 5.0 5.5 9.0 13.0 46.0 43.0 kg 0.7 0.7 0.7 1.1 2.3 2.5 4.1 5.9 20.9 19.5 Cv 0.7 2 8 15 22 38 42 70 110 160

2. Face to face values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower.

3. Size 2" is available in either a cap or bolted cover; please specify when ordering. Weight given is for model with cap cover.

4. Sizes 2½" and 3" have bolted covers.

SCREEN SELECTION GUIDELINES

Size Liquid Open Area Steam Open Area

1/2" ~ 3" 1/16 (.0625) 41% 1/32 (.033) 28%

WYE STRAINER

Threaded Ends Socket Weld Ends

YS 81-CS (Carbon Steel) YS 82-CS (Carbon Steel)

YS 81-SS (Stainless Steel) YS 82-SS (Stainless Steel)

Illustrations are representative of different YS81/82 models. Exploded view is shown with bolted cover;

PRESSURE - TEMPERATURE RATINGS

-100 50 200 350 500 650 800 950 1100

SOURCE: ASME B16.1 Carbon Steel A216 Gr. WCB ASME Class 600 Carbon Steel not recommended for prolonged use above 800°F

Stainless Steel A351 Gr. CF8M ASME Class 600 Stainless Steel not recommended for prolonged use above 1000°F

Temperature (°F)

BILL OF MATERIALS (1)

No. PART YS 81/82-CS (6) YS 81/82-SS

1 Body (2) Carbon Steel A216 Gr. WCB

Stainless Steel A351 Gr. CF8M

2 Cover/Cap (5) Carbon Steel A216 Gr. WCB

Stainless Steel A351 Gr. CF8M

Straining Element (3) Stainless Steel Stainless Steel

4 Gasket (3)(4) Stainless Steel Spiral Wound

Stainless Steel Spiral Wound

5 Studs (5)

BC models only Alloy Steel Alloy Steel

6 Nuts (5)

BC models only Alloy Steel Alloy Steel

7 Plug Carbon Steel Stainless Steel

1. Bill of Materials represents standard materials. Equivalent or better materials may be substituted at the manufacturer's discretion.

2. Available in additional body materials, such as LCB, WC6, WC9, 316L, Alloy 20, and Monel.

3. Denotes recommended spare parts.

4. The cover gasket is encapsulated in a machined recessed seat. A wide range of gasket materials are available; contact factory.

5. Only bolted cover designs (2½", 3", and optional 2") have Parts 5 and 6 (Studs and Nuts).

Threaded cap covers are standard on Sizes ¼" through 1½". Size 2" is available with either a bolted or cap cover.

6. Carbon Steel bodies are epoxy painted.

Exploded View

3" YS 82BC

(Bolted Cover)

Front View

2" YS 81

(Cap Cover)

As † † †TITAN is a registered trademark of Titan Flow Control Incorporated.