RFI- 36C26225Q0727.docx

Sources Sought Notice Sources Sought Notice

GENERAL INFORMATION

SET-ASIDE

Network Contracting Office 22 4811 Airport Plaza Dr Suite 600 Long Beach, CA 90815

POINT OF CONTACT*

Contract Specialist Hayley Nuno Hayley.nuno@va.gov

PLACE OF PERFORMANCE

11201 Benton Street

Loma Linda CA

COUNTRY

RFI 36C26225Q0727

THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION.

SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e).

DISCLAIMER

This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.

SOURCES SOUGHT/RFI DESCRIPTION

This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published.

The Department of Veterans Affairs (VA) is seeking sources capable of providing Outer Tube Instruments.

The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required.

Outer Tube Instruments:

· Must have assorted sizes of tubular retractors to access Spine.

· Must have dilators to expand / retract soft tissue surgical site.

· Dilators must have length markings to determine size /depth of retractors needed.

· Must provide “minimally invasive” approaches that help lessen pain and recovery time.

· Must be stainless steel.

· Must be re-usable.

· Must be able to with stand exposure to high temp steam sterilization.

Parts: Brand Name or Equal To: Medtronic

· INST KIT 9735137 CANNULA 150 - 9735137

· HANDLE 9734410 RATCHETING EGG - 9734410

· HANDLE 9733734 RATCHETING QC SM STRGHT - 9733734

· TUBE 9565726 20MMX9CM COATED - 9565726

· TUBE 9565725 20MMX8CM COATED - 9565725

· TUBE 9565724 20MMX7CM COATED - 9565724

· TUBE 9565723 20MMX6CM COATED - 9565723

· TUBE 9565722 20MMX5CM COATED - 9565722

· TUBE 9565721 20MMX4CM COATED - 9565721

· TUBE 9565720 20MMX3CM COATED - 9565720

· TUBE 9565673 16MMX6CM COATED - 9565673

· TUBE 9565672 16MMX5CM COATED - 9565672

· TUBE 9565671 16MMX4CM COATED - 9565671

· TUBE 9565670 16MMX3CM COATED - 9565670

· TUBE 9565666 14MMX9CM COATED - 9565666

· TUBE 9565665 14MMX8CM COATED - 9565665

· TUBE 9565664 14MMX7CM COATED - 9565664

· TUBE 9565663 14MMX6CM COATED - 9565663

· TUBE 9565662 14MMX5CM COATED - 9565662

· TUBE 9565661 14MMX4CM COATED - 9565661

· TUBE 9565660 14MMX3CM COATED - 9565660

· TUBE 9569726 20MM X 9CM COATED/ANGLED - 9569726

· TUBE 9569725 20MM X 8CM COATED/ANGLED - 9569725

· TUBE 9569724 20MM X 7CM COATED/ANGLED - 9569724

· TUBE 9569723 20MM X 6CM COATED/ANGLED - 9569723

· TUBE 9569722 20MM X 5CM COATED/ANGLED - 9569722

· TUBE 9569721 20MM X 4CM COATED/ANGLED - 9569721

· TUBE 9569720 20MM X 3CM COATED/ANGLED - 9569720

· TUBE 9569686 COATED/ANGLED 18MMX9CM - 9569686

· TUBE 9569685 18MM X 8CM COATED/ANGLED - 9569685

· TUBE 9569683 COATED/ANGLED 18MMX6CM - 9569683

· TUBE 9569682 18MM X 5CM COATED/ANGLED - 9569682

· TUBE 9569681 18MM X 4CM COATED/ANGLED - 9569681

· INSTRUMENT 9561426 METRX DILATOR 12 8MM - 9561426

· INSTRUMENT 9560421 METRX DILATOR 9 4MM - 9560421

· INSTRUMENT 9560420 METRX DILATOR 5 3MM - 9560420

· CASE 9560693 STRT BI POLAR FORCEP SPOOL – 9560693

If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions:

(1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS requirement(s), please show how your company meets/exceeds each requirement.

(2) Please review the list of DRAFT/SALIENT CHARACTERISTICS requirements and provide any additional feedback or suggestions. If none, please reply as N/A.

(3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc.

(4) Is your company considered small under the NAICS code identified in this RFI?

(5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS?

(6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available).

(7) If you’re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified.

(8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6?

(9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items?

(10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice?

(11) Please indicate whether your product conforms to the requirements of the Buy American Act?

(12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate.

(13) What is estimated life span of your solution? What support/services does that entail?

(14) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained.

(15) Does your organization offer a leasing solution? Please elaborate.

(16) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s).

(17) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract.

(18) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award.

(19) Please provide your SAM.gov Unique Entity ID/Cage Code number.

Responses to this notice shall be submitted via email to hayley.nuno @va.gov. Telephone responses will not be accepted. Responses must be received no later than Thursday, April 03, 2025 by 4:00 PM PST.

All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.

Sources Sought Notice