36C26219Q0217-0002002.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

Unit Data Sheet www.temtrol.com

WF-DHRE45Model Number:

Serial Number:

8/29/2008Report Created: 10:41:52AM

Unit Tag:

T000677-006-00

AH-18

Submittal 1

[ SUPPLY FAN ] PF02-36 / CL II NYB 12 Blade Plenum

Adj. SP @ Alt:

SP @ Alt:

5.75 in. Wg.SP @ Sea Level:

5.75 in. Wg.

5.67 in. Wg.

PHYSICAL OPERATION

66.6% / 69.8%

2,680 / 2,104 FPM

913 FPMPlenum Outlet Velocity:

Inlet / Outlet Velocity:

Static / Mech. Efficiency:

Fan BHP / BHP with Belt Loss: 28.99 / 29.86

Mtr Max Inertial Load: 447 WR²

Steel / 126 WR²Wheel Material / Inertia:

Isolation / Deflection: SWERT-2

VAC/PH/HZ - RPM / Encl: 460/3/60 - 1750/TEFC Speed / Qty - Belts:

Motor / Frame / Eff: 40.0hp / 324T / NEMA Pre

MtrShv / Bushing / Shaft: 4B5V94 / B / 2.125 Fan RPM : 1,322 FanShv / Bushing / Shaft: 4B5V124 / B / 2 3/16

Fan CFM @ Alt: 21,356 @ Sea Level

Direct Drive: NO Max Fan Speed: 1450

1337 / (4) BX

STATIC FACTORS

Ducted Radial Discharge: 0.08 in. Wg. in. Wg.

///////// 10181889196981019697 A-Weighted

8000hz

4000hz

2000hz

1000hz

500hz

250hz

125hz

63hz

SOUND OCTAVE BANDS

Inlet / Discharge Air Monitor-TemFlo with Gage Comment: -

Temtrol, Inc. P.O. Box 409 Okarche, OK 73762 Phone: 405-263-7286 Fax: 405-263-4924

[ RETURN FAN ] PF02-30 / CL II NYB 12 Blade Plenum

1.00 in. Wg.SP @ Sea Level:

1.00 in. Wg.

0.89 in. Wg.

63.3% / 65.5%

1,005 / 751 FPM

871 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 1.31 / 1.38

Mtr Max Inertial Load: 52 WR²

Steel / 12 WR²Wheel Material / Inertia:

Motor / Frame / Eff: 5.0hp / 184T / NEMA Prem

MtrShv / Bushing / Shaft: 2VP50 / - / 1.125 Fan RPM : 648 FanShv / Bushing / Shaft: 2B5V110 / B / 1 15/16

Fan CFM @ Alt: 5,288 @ Sea Level

Max Fan Speed: 1805

588 - 743 / (2) BX

Unducted Axial Discharge: 0.11 in. Wg. in. Wg.

///////// 765359667172748471

1-1/8" / 0.035"Tube O.D. / Wall:

Sup.Conn - Qty / Size:

Ret.Conn - Qty / Size:

1Rows - FPI:

0.00Serpentine:

21,356 / 22,872 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

EDB :

LDB :6

1,234,935 Btu/HrSensible Heat:

0.10APD:

10.0Steam Press:

30.00 X 106.00Coil FH x FL:

0.010" / ALFin Thickness / Material:

Tube Material: CU Case Material: 16 GA 304 SS

(1) 1-1/2" MPT SCH40 Red Brass Per Coil

in. Wg.

44.2 / 483.5

34.9 °F

84.7 °F

1295.8 lbs/hr.Condensate:

psig

Coating: NONE

OPERATIONPHYSICAL

[ Coil # 1 ] Steam Heating Coil - (Qty. 2) 9NS - 30 x 106 x 1 - 6 AL - *

Hand: RIGHT

Comment:

1. ARI CERTIFIED 'Rated in Accordance with ARI Standard 410'

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

5/8" / 0.020"Tube O.D. / Wall:

6Rows - FPI:

1.50Serpentine:

21,356 / 19,827 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,347,160 Btu/HrTotal Heat:

1,001,132 Btu/HrSensible Heat:

0.66APD:

9.83FPD:

WaterFluid - %:

191.78GPM:

EFT / LFT:

0.008" / ALFin Thickness / Material:

Fluid Velocity: 3.55(1) 2-1/2" MPT SCH40 Red Brass Per Coil

(1) 2-1/2" MPT SCH40 Red Brass Per Coil ft/s

44.2 / 483.5 100 / 74 °F

54.2 / 53.4 °F

42 / 56 °F ft

EDB / EWB:

LDB / LWB:

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 30 x 106 x 6 - 9 AL - *

Drain Pan - 116W x 51L 16 GA 304 SS RIGHT HAND

(Qty) Size:

Type:

(6)12x24 & (8)24x24 Flat

[ Filter Bank # 1 ] Pre - 4" Pleated Flat - 30% / Final - 12" Cartridge w/Header - 45% Face LoadStainless SteelFrames:

Bank Size: 60 H x 108 W Face Area (ft²) / FV (fpm): 44.0 / 485

Service:

Filter Bank Gauge: Dwyer Model 2002 Clips:No MediaSupplied Sets:IIClass:Media - Pre Filter APD: 0.50

Media - Final Filter Class: Supplied Sets: Clips:II No MediaAPD: 0.75 Filter frames by Temtrol. Pre/Final Filter media and holding clips are furnished by others.

AFTER FILTER IS FARR CITYSORB CARBON

[ Filter Bank # 2 ] Final - 12" Cartridge w/Header - 95%

Face Area (ft²) / FV (fpm): 44.0 / 485

Media - Final Filter Class: Supplied Sets: Clips:II No MediaAPD: 1.00

Final Filter media and holding clips are furnished by others.

Openings FVCFMLocationSize (A x B)Description

R/A 60 x 18 Top - No Duct Flange 5288 705 S/A 114 x 30 Top - No Duct Flange 21356 913

Dampers Model # / Blade ActionFVCFMLocationSize (A x B)Description

R/A 60 x 18 Internal - Vertical 5288 809 AF6 / Opposed O/A 114 x 30 Top 21356 1034 AF6 / Opposed E/A 60 x 18 Top 5288 809 AF6 / Opposed

WF-DHRE42Model Number:

8/29/2008Report Created: 10:47:11AM

T000677-007-00

AH-19

Rep. Firm:

Rep. Contact:

KFMTemtrol Eng.:

LOMA LINDA VAMC PHASE II

Unit Weight:

Job Name:

12600 Lbs.

DENNIS CHRISTIE @ 858-391-7008

CLIMATEC, INC. - POWAY

Unit Type: INDOOR

Unit Notes

Sub Floor Material:

Floor Material:

20ga. Galvanized 16 ga. G-90 Galvanized 16 ga. G-90 Galvanized - PaintedExterior Casing:

Unit Details

Base Size: 2 x 5 x 1/8 in.

2 4 06 Access Doors: Windows T.O.S.L. P.K.S.Quantity Louvers

Static Pressure Summary

Supply Description Static

PF02-36 DUCTED RADIAL DISCHARGE 0.10

HEATING 9NS - 30 X 100 X 1 - 6 AL 0.11

COOLING 5WC - 6 - 30 X 100 X 6 - 8 AL 0.60

4" PLEATED FLAT 30% 0.50

12" CARTBON W/HEADER 0.31

12" CARTRIDGE W/HEADER 95% 1.00

O/A AF6 DAMPER 0.10

MISCELLANEOUS 0.08

Total Supply Static Pressure

Internal Static Pressure Avaliable External Static Pressure

2.80 2.95 5.75

-Comment:

Static Description Return

PF02-36 UNDUCTED AXIAL DISCHARGE 0.11

E/A AF6 DAMPER 0.09

R/A OPENING 0.05

MISCELLANEOUS 0.05

Total Return Static Pressure

Internal Static Pressure 0.30

0.75 1.05

Electrical VAC/PH/HZ: 460/3/60 Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

All lights controlled by a single 0 to 60 minute light timer switch. One outlet provided.

120 volt power for lighting and/or GFI outlets shall be provided by Others

5.65 in. Wg.

66.8% / 69.9%

2,608 / 2,048 FPM

1,039 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 28.14 / 28.98

Steel / 123 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 4B5V90 / B / 2.125 Fan RPM : 1,307

Fan CFM @ Alt: 20,788 @ Sea Level

1281 / (4) BX

Ducted Radial Discharge: 0.10 in. Wg. in. Wg.

///////// 10081889096981009697

[ RETURN FAN ] PF02-36 / CL II NYB 12 Blade Plenum

1.05 in. Wg.SP @ Sea Level:

1.05 in. Wg.

0.94 in. Wg.

60.5% / 65.9%

1,564 / 1,228 FPM

Fan BHP / BHP with Belt Loss: 3.40 / 3.53

Steel / 32 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 2VP50 / - / 1.125 Fan RPM : 666 FanShv / Bushing / Shaft: 2B5V110 / B / 2 3/16

Fan CFM @ Alt: 12,463 @ Sea Level

///////// 876269808383848984

20,788 / 21,507 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,063,655 Btu/HrSensible Heat:

0.11APD:

30.00 X 100.00Coil FH x FL:

41.7 / 498.9

52.3 °F

97.9 °F

1116.1 lbs/hr.Condensate:

[ Coil # 1 ] Steam Heating Coil - (Qty. 2) 9NS - 30 x 100 x 1 - 6 AL - *

Hand: LEFT

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

1.00Serpentine:

20,788 / 19,647 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,034,501 Btu/HrTotal Heat:

809,864 Btu/HrSensible Heat:

0.60APD:

11.66FPD:

147.26GPM:

Fluid Velocity: 4.08(1) 2-1/2" MPT SCH40 Red Brass Per Coil

41.7 / 498.9

91.4 / 69.7 °F

53.9 / 52.8 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 6 - 30 x 100 x 6 - 8 AL - *

Drain Pan - 110W x 51L 16 GA 304 SS LEFT HAND

Face Area (ft²) / FV (fpm): 44.0 / 472

Face Area (ft²) / FV (fpm): 44.0 / 472

R/A 84 x 24 Top - No Duct Flange 12463 890 S/A 96 x 30 Top - No Duct Flange 20788 1,039

R/A 84 x 24 Internal - Vertical 12463 1017 AF6 / Opposed O/A 108 x 30 Top 20788 1063 AF6 / Opposed E/A 84 x 24 Top 12463 1017 AF6 / Opposed

8/29/2008Report Created: 10:50:14AM

T000677-008-00

AH-27

PF02-36 DUCTED RADIAL DISCHARGE 0.10

HEATING 9NS - 30 X 100 X 1 - 6 AL 0.10

COOLING 5WC - 6 - 30 X 100 X 6 - 8 AL 0.59

4" PLEATED FLAT 30% 0.50

12" CARBON W/HEADER 0.31

12" CARTRIDGE W/HEADER 95% 1.00

MISCELLANEOUS 0.10

2.80 2.95

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

67.0% / 70.0%

2,592 / 2,035 FPM

1,032 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 27.91 / 28.75

Steel / 122 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 4B5V90 / B / 2.125 Fan RPM : 1,303

Fan CFM @ Alt: 20,656 @ Sea Level

///////// 10081889096981009697

59.3% / 65.1%

1,634 / 1,283 FPM

Fan BHP / BHP with Belt Loss: 3.62 / 3.77

Steel / 34 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 2VP50 / - / 1.125 Fan RPM : 684

Fan CFM @ Alt: 13,025 @ Sea Level

///////// 886370828484849085

20,656 / 21,312 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,051,027 Btu/HrSensible Heat:

41.7 / 495.7

53.7 °F

99.2 °F

1102.8 lbs/hr.Condensate:

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

20,656 / 19,552 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,006,408 Btu/HrTotal Heat:

793,556 Btu/HrSensible Heat:

0.59APD:

11.10FPD:

143.27GPM:

Fluid Velocity: 3.97(1) 2-1/2" MPT SCH40 Red Brass Per Coil

41.7 / 495.7

90.7 / 69.3 °F

53.8 / 52.7 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 6 - 30 x 100 x 6 - 8 AL - *

Face Area (ft²) / FV (fpm): 44.0 / 469

Face Area (ft²) / FV (fpm): 44.0 / 469

R/A 90 x 24 Top - No Duct Flange 13025 868 S/A 96 x 30 Top - No Duct Flange 20656 1,032

R/A 90 x 24 Internal - Vertical 13025 991 AF6 / Opposed O/A 108 x 30 Top 20656 1057 AF6 / Opposed E/A 90 x 24 Top 13025 991 AF6 / Opposed

8/29/2008Report Created: 11:29:55AM

T000677-009-00

AH-34

PF02-36 DUCTED RADIAL DISCHARGE 0.10

HEATING 9NS - 30 X 100 X 1 - 6 AL 0.10

COOLING 5WC - 4 - 30 X 100 X 6 - 10 AL 0.74

4" PLEATED FLAT 30% 0.50

12" CARBON W/HEADER 0.31

12" CARTRIDGE W/HEADER 95% 1.00

O/A AF6 DAMPER 0.11

MISCELLANEOUS 0.04

2.90 2.85

PF02-33 UNDUCTED AXIAL DISCHARGE 0.11

R/A OPENING 0.04

MISCELLANEOUS 0.06

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

67.1% / 69.9%

2,531 / 1,987 FPM

1,008 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 27.18 / 27.99

Steel / 120 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 4B5V90 / B / 2.125 Fan RPM : 1,290

Fan CFM @ Alt: 20,169 @ Sea Level

///////// 10080879095971009596

[ RETURN FAN ] PF02-33 / CL II NYB 12 Blade Plenum

65.7% / 69.0%

1,191 / 914 FPM

Fan BHP / BHP with Belt Loss: 1.90 / 1.99

Steel / 17 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 2VP50 / - / 1.125 Fan RPM : 629 FanShv / Bushing / Shaft: 2B5V124 / B / 1 15/16

Fan CFM @ Alt: 7,563 @ Sea Level

Max Fan Speed: 1650

524 - 661 / (2) BX

///////// 815763727779808477

20,169 / 21,354 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,126,728 Btu/HrSensible Heat:

41.7 / 484.1

40.6 °F

89.2 °F

1182.3 lbs/hr.Condensate:

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

20,169 / 18,803 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,229,338 Btu/HrTotal Heat:

935,081 Btu/HrSensible Heat:

0.74APD:

8.05FPD:

174.73GPM:

Fluid Velocity: 3.23(1) 2-1/2" MPT SCH40 Red Brass Per Coil

41.7 / 484.1

98.2 / 72.8 °F 53 / 52.5 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 30 x 100 x 6 - 10 AL - *

Drain Pan - 110W x 51L 16 GA 304 SS RIGHT HAND

Face Area (ft²) / FV (fpm): 44.0 / 458

Face Area (ft²) / FV (fpm): 44.0 / 458

R/A 54 x 24 Top - No Duct Flange 7563 840 S/A 96 x 30 Top - No Duct Flange 20169 1,008

R/A 54 x 24 Internal - Vertical 7563 967 AF6 / Opposed O/A 96 x 30 Top 20169 1150 AF6 / Opposed E/A 54 x 24 Top 7563 967 AF6 / Opposed

8/29/2008Report Created: 11:31:51AM

T000677-010-00

AH-35

PF02-36 DUCTED RADIAL DISCHARGE 0.11

HEATING 9NS - 30 X 100 X 1 - 6 AL 0.11

COOLING 5WC - 6 - 30 X 100 X 6 - 9 AL 0.71

4" PLEATED FLAT 30% 0.50

12" CARBON W/HEADER 0.31

12" CARTRIDGE W/HEADER 95% 1.00

2.90 2.85

E/A AF6 DAMPER 0.10

R/A OPENING 0.06

MISCELLANEOUS 0.03

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

5.64 in. Wg.

66.5% / 69.7%

2,687 / 2,110 FPM

1,070 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 29.11 / 29.98

Steel / 126 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 4B5V94 / B / 2.125 Fan RPM : 1,324

Fan CFM @ Alt: 21,413 @ Sea Level

1337 / (4) BX

Ducted Radial Discharge: 0.11 in. Wg. in. Wg.

///////// 10181889196981019697

58.6% / 64.6%

1,671 / 1,312 FPM

Fan BHP / BHP with Belt Loss: 3.75 / 3.90

Steel / 35 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 2VP50 / - / 1.125 Fan RPM : 694

Fan CFM @ Alt: 13,319 @ Sea Level

///////// 886471828484859185

21,413 / 22,106 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,071,388 Btu/HrSensible Heat:

0.11APD:

41.7 / 513.9

53.4 °F

98.1 °F

1124.2 lbs/hr.Condensate:

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

21,413 / 20,201 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,129,576 Btu/HrTotal Heat:

880,246 Btu/HrSensible Heat:

0.71APD:

13.68FPD:

160.76GPM:

Fluid Velocity: 4.46(1) 2-1/2" MPT SCH40 Red Brass Per Coil

41.7 / 513.9

92.4 / 70 °F

52.8 / 52 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 6 - 30 x 100 x 6 - 9 AL - *

Face Area (ft²) / FV (fpm): 44.0 / 487

Face Area (ft²) / FV (fpm): 44.0 / 487

R/A 84 x 24 Top - No Duct Flange 13319 951 S/A 96 x 30 Top - No Duct Flange 21413 1,070

R/A 84 x 24 Internal - Vertical 13319 1087 AF6 / Opposed O/A 108 x 30 Top 21413 1095 AF6 / Opposed E/A 84 x 24 Top 13319 1087 AF6 / Opposed

WF-DH50Model Number:

3/25/2004Report Created: 10:27:48AM

U101262-001-00

AH-20

JWPTemtrol Eng.:

VA LOMA LINDA GI EXPANSION

11300 Lbs.

G. BLACKFELNER @ 909-869-7975

AIR TREATMENT CORPORATION

20 ga. G-90 Galvanized

1 0 04

PF02-40 UNDUCTED AXIAL DISCHARGE 0.04

HEATING 9NS - 36 X 100 X 1 - 6 CU 0.09

COOLING 5WC - 4 - 36 X 100 X 6 - 8 CU 0.43

2" PLEATED FLAT 30% 0.50

12" CARTRIDGE 95% 1.00

HUMIDIFIER FURNISHED AND INSTALLED BY O 0.00

2.06 3.94 6.00

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

http://www.temtrol.com

[ SUPPLY FAN ] PF02-40 / CL II NYB 12 Blade Plenum

6.00 in. Wg.SP @ Sea Level:

6.00 in. Wg.

5.96 in. Wg.

71.4% / 74.1%

2,152 / 1,906 FPM

500 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 31.06 / 31.99

Steel / 133 WR²Wheel Material / Inertia:

VAC/PH/HZ - RPM / Encl: 460/3/60 - 1750/ODP Speed / Qty - Belts: 1121 / 4 - BX120

Motor / Frame / Eff: 40.0hp / 324T / Premium

MtrShv / Bushing / Shaft: 4B5V86 / B / 2.125 Fan RPM : 1,120

FanShv / Bushing / Shaft: 4B5V136 / B / 2 3/16

Fan CFM @ Alt: 23,500 @ Sea Level

Max Fan Speed: 1315

Unducted Axial Discharge: 0.04 in. Wg.

///////// 100 82 87 90 96 98 101 95 95

23,500 / 23,500 @ Sea LevelACFM / SCFM @ Alt.:Total Face Area / FV :

LDB : 6

1,585,760 Btu/HrSensible Heat:

0.09APD:

12.0Steam Press:

36.00 X 100.00Coil FH x FL:

0.010" / CUFin Thickness / Material:

50.0 / 470.0 29 °F

91.2 °F

1669.1 lbs/hr.Condensate:

[ Coil # 1 ] Steam Heating Coil - (Qty. 2) 9NS - 36 x 100 x 1 - 6 CU

2. Air Temperature Correction for CFM not active

3. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

5/8" / 0.025"Tube O.D. / Wall:

23,500 / 23,500 @ Sea LevelACFM / SCFM @ Alt.:Total Face Area / FV :

1,434,092 Btu/HrTotal Heat:

1,434,092 Btu/HrSensible Heat:

0.43APD:

11.58FPD:

285.50GPM:

36.00 X 100.00Coil FH x FL:

0.006" / CUFin Thickness / Material:

Fluid Velocity: 4.47(1) 3" MPT SCH40 Red Brass Per Coil

(1) 3" MPT SCH40 Red Brass Per Coil

50.0 / 470.0 105 / 68 °F

48.7 / 47.6 °F

42 / 52 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 36 x 100 x 6 - 8 CU

Drain Pan - 110W x 39L 16 GA 304 SS RIGHT HAND

1. (EDB) falls outside the range of Standard Rating Conditions specified in 'ARI Standard 410'.

2. Rated in Compliance with ARI Standard 410

3. Air Temperature Correction for CFM not active

(3)12x24 & (12)24x24

[ Filter Bank # 1 ] Pre - 2" Pleated Flat - 30%

Bank Size: 72 H x 108 W Face Area (ft²) / FV (fpm): 54.0 / 435

Filter frames by Temtrol. Pre Filter media and holding clips are furnished by others.

[ Filter Bank # 2 ] Final - 12" Cartridge - 95%

Face Area (ft²) / FV (fpm): 54.0 / 435

[ UDC # 1 ] Humidifier Furnished and Installed by OTHERS

P.O. NumberPure lbs./hr.

Elec. / Pneum.

See attached

Manufacturer Model Load - lbs./hr.

Inlet Pressure PSIG Operator (Elec / Pneum) Performance

Humidifier Furnished and Installed by OTHERSComment:

S/A 102 x 30 Top 23500 1105

O/A 102 x 30 Top 23500 1275 AF6 / Opposed

WF-DHRE49Model Number:

6/4/2007Report Created: 9:06:16AM

U103461-001-00

AH-21

Submittal 2

VA LOMA LINDA SCANNER SITE

17250 Lbs.

G.BLACKFELNER @ 909-869-7975

PF02-33 UNDUCTED AXIAL DISCHARGE 0.04

COOLING 5WC - 4 - 33 X 106 X 6 - 10 CU 0.71

4" PLEATED FLAT 30% 0.50

12" CARTRIDGE 95% 1.00

O/A AF6 DAMPER 0.10

S/A OPENING 0.05

MISCELLANEOUS 0.20

2.60 5.40 8.00

PF02-40 UNDUCTED AXIAL DISCHARGE 0.15

Internal Static Pressure 0.25

1.90 2.15

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

[ SUPPLY FAN ] PF02-33 / CL III NYB 12 Blade Plenum

8.00 in. Wg.SP @ Sea Level:

8.00 in. Wg.

7.96 in. Wg.

65.5% / 69.1%

3,465 / 2,657 FPM

Fan BHP / BHP with Belt Loss: 42.28 / 43.47

Mtr Max Inertial Load: 572 WR²

Steel / 191 WR²Wheel Material / Inertia:

Speed / Qty - Belts: 1750 / 4 - BX108

Motor / Frame / Eff: 50.0hp / 326T / NEMA Pre

MtrShv / Bushing / Shaft: 4B5V110 / B / 2.125 Fan RPM : 1,779 FanShv / Bushing / Shaft: 4B5V110 / B / 2 3/16

Fan CFM @ Alt: 22,000 @ Sea Level

Max Fan Speed: 2080

Unducted Axial Discharge: 0.04 in. Wg. in. Wg.

///////// 10888939810410610497104

[ RETURN FAN ] PF02-40 / CL II NYB 12 Blade Plenum

2.15 in. Wg.SP @ Sea Level:

2.15 in. Wg.

2.00 in. Wg.

61.1% / 66.7%

2,245 / 1,784 FPM

1,035 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 12.20 / 12.61

Mtr Max Inertial Load: 236 WR²

Steel / 82 WR²Wheel Material / Inertia:

Speed / Qty - Belts: 868 / 3 - BX105

Motor / Frame / Eff: 20.0hp / 256T / NEMA Pre

MtrShv / Bushing / Shaft: 3B5V60 / B / 1.625 Fan RPM : 880 FanShv / Bushing / Shaft: 3B5V124 / B / 2 3/16

Fan CFM @ Alt: 22,000 @ Sea Level

Unducted Axial Discharge: 0.15 in. Wg. in. Wg.

///////// 987782869297989892

22,000 / 21,323 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

835,253 Btu/HrTotal Heat:

611,205 Btu/HrSensible Heat:

0.69APD:

6.96FPD:

166.48GPM:

33.00 X 106.00Coil FH x FL:

Fluid Velocity: 2.80(1) 2-1/2" MPT SCH40 Red Brass Per Coil

48.6 / 452.8 78 / 65 °F

51.9 / 51.6 °F

45 / 55 °F

[ Coil # 1 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 33 x 106 x 6 - 10 CU - *

Drain Pan - 116W x 51L 16 GA 304 SS RIGHT HAND

(12)24x24

[ Filter Bank # 1 ] Pre - 4" Pleated Flat - 30%

Bank Size: 72 H x 96 W Face Area (ft²) / FV (fpm): 48.0 / 458

Filter Bank Gauge: Dwyer Model 2001

(12)24x24

Bank Size: 72 H x 96 W Face Area (ft²) / FV (fpm): 48.0 / 458

R/A 114 x 30 Top - No Duct Flange 22000 926 S/A 114 x 30 Top - No Duct Flange 22000 926

R/A 102 x 30 Internal - Vertical 22000 1193 AF6 / Opposed O/A 114 x 30 Top 22000 1065 AF6 / Opposed E/A 114 x 30 Top 22000 1065 AF6 / Opposed

WF-DHRE44Model Number:

6/14/2010Report Created: 1:22:21PM

T005235-002-00

AH-23 / J15629

VA LOMA LINDA PHASE III

14900 Lbs.

GREG BLACKFELNER @ 626-869-7975

AIR TREATMENT CORP.

Base Size: 5 in.

PF02-33 UNDUCTED AXIAL DISCHARGE 0.04

HEATING 9NS - 30 X 106 X 1 - 4 AL 0.07

COOLING 5WC - 4 - 30 X 106 X 6 - 10 AL 0.70

4" PLEATED FLAT 30% 0.50

12" CARTRIDGE W/HEADER 95% 1.00

O/A TD6 DAMPER 0.12

S/A OPENING 0.07

MISCELLANEOUS 0.10

2.60 4.40 7.00

PF02-36 UNDUCTED AXIAL DISCHARGE 0.15

E/A TD6 DAMPER 0.12

R/A OPENING 0.07

Internal Static Pressure 0.40

1.60 2.00

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

VFD(s) furnished to Temtrol for factory installation and wiring.

Input power wiring to VFD's are not wired together for single point connection. Interconnection to be performed in the field by Others.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

[ SUPPLY FAN ] PF02-33 / CL III NYB 12 Blade Plenum

7.00 in. Wg.SP @ Sea Level:

7.00 in. Wg.

6.96 in. Wg.

65.5% / 69.1%

3,237 / 2,483 FPM

Fan BHP / BHP with Belt Loss: 34.55 / 35.59

Aluminum / 167 WR²Wheel Material / Inertia:

MtrShv / Bushing / Shaft: 4B5V86 / B / 2.125 Fan RPM : 1,663 FanShv / Bushing / Shaft: 4B5V90 / B / 2 3/16

Fan CFM @ Alt: 20,556 @ Sea Level

Max Fan Speed: 2080

1675 / (4) BX

Unducted Axial Discharge: 0.04 in. Wg.

///////// 10686919610210310395102

Air Monitor-TemFlo without Gage Comment: Drill weep holes in all fan blades.

2.00 in. Wg.SP @ Sea Level:

2.00 in. Wg.

1.85 in. Wg.

55.1% / 62.2%

2,579 / 2,025 FPM

1,028 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 11.74 / 12.13

Mtr Max Inertial Load: 152 WR²

Steel / 76 WR²Wheel Material / Inertia:

Motor / Frame / Eff: 15.0hp / 254T / NEMA Pre

MtrShv / Bushing / Shaft: 3B5V50 / B / 1.625 Fan RPM : 1,030 FanShv / Bushing / Shaft: 3B5V86 / B / 2 3/16

Fan CFM @ Alt: 20,556 @ Sea Level

1042 / (3) BX

Unducted Axial Discharge: 0.15 in. Wg.

///////// 987684879395999294

Air Monitor-TemFlo without Gage

1-1/8" / 0.025"Tube O.D. / Wall:

20,556 / 21,225 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

LDB :4

723,698 Btu/HrSensible Heat:

0.07APD:

5.0Steam Press:

44.2 / 465.4

53.3 °F

84.7 °F

753.1 lbs/hr.Condensate:

[ Coil # 1 ] Steam Heating Coil - (Qty. 2) 9NS - 30 x 106 x 1 - 4 AL - *

1. AHRI CERTIFIED 'Rated in Accordance with AHRI Standard 410'

2. If EDB is less than or equal to 32°F, Temtrol recommends 5 psig minimum and NO modulating steam valve.

20,556 / 19,449 - Sea LevelACFM / SCFM - Alt.:Total Face Area / FV :

1,038,534 Btu/HrTotal Heat:

820,050 Btu/HrSensible Heat:

0.70APD:

11.32FPD:

206.99GPM:

Fluid Velocity: 3.83(1) 2-1/2" MPT SCH40 Red Brass Per Coil

44.2 / 465.4

90.9 / 69.4 °F

52.5 / 52.1 °F

45 / 55 °F

[ Coil # 2 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 30 x 106 x 6 - 10 AL - *

Drain Pan - 116W x 51L 16 GA 304 SS LEFT HAND

1. AHRI CERTIFIED 'Rated in Accordance with AHRI Standard 410'

[ Filter Bank # 1 ] Pre - 4" Pleated Flat - 30%

Face Area (ft²) / FV (fpm): 44.0 / 467

Face Area (ft²) / FV (fpm): 44.0 / 467

R/A 96 x 30 Top - No Duct Flange 20556 1,027 S/A 96 x 30 Top - No Duct Flange 20556 1,027

Model # / ActionFVCFMLocationDescription Size 1 Size 2 Size 3 Size 4 Size 5 Size 6

R/A 20556 1184 TD6 / OpposedInt - Vertical30x96 O/A 20556 1184 TD6 / OpposedTop30x96 E/A 20556 1184 TD6 / OpposedTop30x96

ABB Drive Dimensions.pdf

Submittal Schedule

Submittal Schedule Details for AH-36 SF

Submittal Schedule Details for AH-15 SF, AH-23 SF

Submittal Schedule Details for AH-31 SF

ACH550 Product Overview

Description

ACH550 Specifications

ACH550 Specifications (continued)

ACH550 Control Panel

Run Indication and Shaft Direction

Control Modes

Cable Connections

ACH550 Control Terminals - Main I/O Terminal X1

ACH550 with ABB E-Clipse bypass – Overview

ABB E-Clipse bypass Standard Features

Damper Control Circuit (Run Permissive)

Smoke Control and Override Modes

Serial communications

ABB E-Clipse bypass Operator Control

ACH550 Control Panel

Bypass Control Keypad

Control Modes

Drive mode

Bypass mode

Smoke Control mode

Bypass Override mode

Hand mode

Auto mode

Off Mode

Programmable Relay Contact Outputs

The ABB E-Clipse bypass has five programmable relay outputs as standard. The default programming descriptions for these relay outputs is described below.

Bypass Not Faulted

System Running

System Started

Bypass Selected

Bypass Auto

Cable Connections

Terminal Sizes

Protections

Internal Layout Drawings

Control Terminals

Dimension Drawing for AH-36 SF

Dimension Drawing for AH-15 SF, AH-23 SF, AH-31 SF

Power Drawing for AH-15 RF, AH-23 RF

Power Drawing for AH-36 SF

Power Drawing for AH-15 SF, AH-23 SF, AH-31 SF

WF-DHRE53Model Number:

1/9/2006Report Created: 8:50:42AM

U102626-001-00

AH-30

STATemtrol Eng.:

VA LOMA LINDA CATH LAB

16844 Lbs.

G.BLACKFELNER @ 909-869-7975

1" SS UNI-STRUT INSTALLED BY TEMTROL FOR FIELD INSTALLED, REP SUPPLIED HUMIDIFIER (SEE DRAWING)

304 SS WALLS AND FLOOR IN HUMIDIFIER SECTION

2 4 05

PF02-40 UNDUCTED RADIAL DISCHARGE 0.03

COOLING 5WC - 4 - 36 X 106 X 6 - 9 CU 0.62

2" PLEATED FLAT 30% 0.50

12" CARTRIDGE 95% 1.00

O/A AF6 DAMPER 0.09

S/A OPENING 0.07

2.31 3.00 5.31

R/A OPENING 0.07

PF02-44 UNDUCTED RADIAL DISCHARGE 0.12

Internal Static Pressure 0.28

2.00 2.28

Unless otherwise noted below all electrical and automatic control devices are furnished and installed by others in the field.

Fan motor wired to an exterior mounted junction box.

Guarded vapor-proof light fixture(s) with 100W incandescent light bulb(s). Fixture locations shown on unit drawings are approximate.

[ SUPPLY FAN ] PF02-40 / CL II NYB 12 Blade Plenum

5.31 in. Wg.SP @ Sea Level:

5.31 in. Wg.

5.28 in. Wg.

70.8% / 74.2%

2,289 / 2,028 FPM

461 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 29.48 / 30.36

Steel / 130 WR²Wheel Material / Inertia:

Speed / Qty - Belts: 1121 / 4 - BX120

Motor / Frame / Eff: 40.0hp / 324T / Premium

MtrShv / Bushing / Shaft: 4B5V86 / B / 2.125 Fan RPM : 1,105

FanShv / Bushing / Shaft: 4B5V136 / B / 2 3/16

Fan CFM @ Alt: 25,000 @ Sea Level

Unducted Radial Discharge: 0.03 in. Wg. in. Wg.

///////// 101 82 87 90 96 99 101 95 95

[ RETURN FAN ] PF02-44 / CL II NYB 12 Blade Plenum

2.28 in. Wg.SP @ Sea Level:

2.28 in. Wg.

2.16 in. Wg.

71.0% / 74.4%

1,481 / 1,329 FPM

968 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 10.10 / 10.43

Mtr Max Inertial Load: 152 WR²

Steel / 75 WR²Wheel Material / Inertia:

Speed / Qty - Belts: 642 / 3 - BX115

Motor / Frame / Eff: 15.0hp / 254T / Premium

MtrShv / Bushing / Shaft: 3B5V48 / B / 1.625 Fan RPM : 654

FanShv / Bushing / Shaft: 3B5V136 / B / 2 7/16

Fan CFM @ Alt: 20,000 @ Sea Level

Max Fan Speed: 1190

Unducted Radial Discharge: 0.12 in. Wg. in. Wg.

///////// 88 74 78 80 83 84 87 92 83

25,000 / 24,086 @ Sea LevelACFM / SCFM @ Alt.:Total Face Area / FV :

946,386 Btu/HrTotal Heat:

789,352 Btu/HrSensible Heat:

0.62APD:

9.29FPD:

200.50GPM:

36.00 X 106.00Coil FH x FL:

Fluid Velocity: 3.09(1) 2-1/2" MPT SCH40 Red Brass Per Coil

53.0 / 471.7 82 / 65 °F

52.1 / 51.5 °F

45 / 54.4 °F

[ Coil # 1 ] Chilled Water Coil - (Qty. 2) 5WC - 4 - 36 x 106 x 6 - 9 CU

Drain Pan - 116W x 39L 16 GA 304 SS RIGHT HAND

[ Filter Bank # 1 ] Pre - 2" Pleated Flat - 30%

Face Area (ft²) / FV (fpm): 54.0 / 463

[ Filter Bank # 2 ] Final - 12" Cartridge - 95%

Face Area (ft²) / FV (fpm): 54.0 / 463

R/A 114 x 24 Top - No Duct Flange 20000 1,052 S/A 114 x 30 Top - No Duct Flange 25000 1,052

R/A 96 x 42 Internal - Vertical 20000 814 AF6 / Opposed O/A 114 x 36 Top 25000 1008 AF6 / Opposed E/A 114 x 30 Top 20000 968 AF6 / Opposed

6/16/2009Report Created: 2:38:55PM

Job Tag:

P531401-001-00

AH-37

Job Name: VA LL Replace AH-37

2009.100

PF02-24 / CL II NYB 12 Blade Plenum

1.50 in. Wg.SP @ Sea Level:

1.50 in. Wg.

1.50 in. Wg.

62.6% / 64.4%

1,176 / 844 FPM

1,200 FPMPlenum Outlet Velocity:

Fan BHP / BHP with Belt Loss: 1.51 / 1.58

Mtr Max Inertial Load: 29 WR²

Steel / 12 WR²Wheel Material / Inertia:

Motor / Frame / Eff: 3.0hp / 182T / NEMA Prem

Fan Shaft :

Fan RPM : 963

Fan CFM @ Alt: 4,000 @ Sea Level

Max Fan Speed: 2335

1 11/16

///////// 826467747877828074

Temtrol 15 E. Oklahoma Ave. • Okarche, OK 73762 405-263-7286 • Fax: 405-263-4980