36C26124Q0353_1.docx

Sources Sought Notice Sources Sought Notice

GENERAL INFORMATION

SET-ASIDE

Network Contracting Office (NCO 21) VA Central California Health Care System 855 M Street, Suite 1020 Fresno CA 93721

POINT OF CONTACT*

Contracting Officer Mathew B. Czeshinski mathew.czeshinski@va.gov

PLACE OF PERFORMANCE

VA Sierra Pacific Network (VISN 21)

VA Sierra Nevada Healthcare System

975 Kirman Ave

Reno NV

COUNTRY

ADDITIONAL INFORMATION

AGENCY’S URL

URL DESCRIPTION

AGENCY CONTACT’S EMAIL ADDRESS

EMAIL DESCRIPTION

DESCRIPTION

Subject: Sources Sought, Micro Needle holder kit, Veterans Health Administration (VHA) VISN 21.

The purpose of this sources sought is to conduct market research to support the procurement of Micro Needle Holder Kits for VISN21. This notice serves to survey the market in an attempt to ascertain whether or not sources are capable of providing the requested services. This notice allows potential contractors/vendors to submit a non-binding statement of interest and documentation demonstrating their capability. The sources sought effort is intended to assess industry capabilities and develop/support the intended direction of acquisition planning. The Network Contracting Office (NCO 21) is requesting responses from qualified business concerns; the qualifying NAICS code for this effort is 339112– Surgical and Medical Instrument Manufacturing.

This sources sought is to gain knowledge of potential qualified sources and their size classifications (Service Disabled/Veteran Owned Small Business (SDVOSB/VOSB), Hub zone, 8(a), small, small disadvantaged, woman owned small business, or large business) relative to NAICS 339112. Responses to this notice, will be used by the Government to make appropriate acquisition decisions. After review of the responses to this notice, a solicitation announcement may be published. Responses to this notice are not considered adequate responses to any corresponding solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this notice.

Background: The Department of Veterans Affairs is seeking vendors who can provide the needed Micro Needle Holders per the attached draft Salients. The vendors must demonstrate the ability to meet all requirements for this notice. See below draft Salients.

INSTRUCTIONS:

Submit a brief description, two-three (2-3) pages (including cover letter) that demonstrates how your company can provide the requested services that are required in the attached draft salients. Include past experience in providing this requirement to the VA, other Government (Federal or State) agency, or for a private facility. Please specify your availability and your address. The attached salients is a draft, and is NOT finalized. If any portions seem unclear, prohibited, and/or you are unsure about the draft description of the requirement please list your comments and/or concerns in your response so they can be addressed. PLEASE INDICATE WHETHER YOU HOLD A GSA FEDERAL-SUPPLY SCHEDULE CONTRACT THAT COVERS THESE SERVICES AND, IF SO, THE CONTRACT NUMBER. Provide BUSINESS SIZE AND SOCIO-ECONOMIC STATUS; (a) Indicate whether your business is large or small (b) If small, indicate if your firm qualifies as a small, emerging business, or small disadvantages business (c) If disadvantages, specify under which disadvantaged group and if your firm is certified under Section 8(a) of the Small Business Act (d) Indicate if your firm is a certified Service-Disabled Veteran Owned Small Business (SDVOSB) or Veteran Owned Small Business (VOSB) (g) Include the DUNS number of your firm. (h) State whether your firm is registered with the System for Award Management (SAM) at http://www.sam.gov and/or the VetCert Registry at https://www.sba.gov. If not, please NOTE that any future solicitation could only be awarded to a contractor who is registered in SAM and to receive award based on VOSB or SDVOSB status you must be registered in the VetCert Registry (i) provide current commercial pricing for all items listed in the attached Salients and any applicable discounts. (j) link to the respondent’s General Services Administration (GSA) schedule, or attached file of same, if applicable (k) citation of any current or past customers (i.e., within the past two (2) years) to include contract number, point of contact telephone number or e-mail address; and (l) other material relevant to establishing core competencies of the firm.

Response is due by 15:00 EST Monday, February 12, 2024. Please submit e-mail responses to Mat Czeshinski, Contract Specialist, at email address: mathew.czeshinski@va.gov . Your response should include a STATEMENT OF CAPABLILITY, GSA SCHEDULE INFORMATION, DUNS#, BUSINESS SIZE, AND SOCIO-ECONOMIC STATUS information as explained above. Please place “SS RESPONSE - [YOUR FIRM NAME] – Needle Holder – VASNHCS” in the subject line of your email. This notice is to assist the VA in determining sources only.

NOTES: Issuance of this notice does not constitute any obligation whatsoever on the part of the Government to procure these services, or to issue a solicitation, nor to notify respondents of the results of this notice. No solicitation documents exists at this time; however, in the event the acquisition strategy demonstrates that GSA is a viable option for procuring a solution, the RFQ shall be posted to GSA eBuy where only those firms who currently hold a GSA Schedule with the applicable SIN will be able to respond. The Department of Veterans Affairs is neither seeking quotes nor accepting unsolicited quotes, and responses to this notice cannot be accepted as offers. Any information the vendor considers proprietary should be clearly marked as such. The U.S. Government will not pay for any information or administrative costs incurred in response to this RFI.

3003-381 SCANLANr LEGACY PuskasT Jacobson Micro Needle Holder, round handle, (extended knurling), with ratchet, straight DIAMOND DUSTT jaws, regular box lock, 8-1/4" / 21cm

3003-354 SCANLANr LEGACY Jacobson Micro Needle Holder, round handle, extended 10 mm diameter knurling, with ratchet, straight DIAMOND DUSTT jaws, streamline boxlock, 8" / 20 cm

Brand Name Item: Scanlan Legacy Jacobson Micro Needle Holder

1) Essential/significant physical, functional, or performance characteristics.

a) Compatibility – none

b) Dimensions – this is a kit with multiple items

c) Weight- this is a kit with multiple items

d) Industry/Government Standard – Needle Holders are used for holding surgical needles during suturing procedures. They are used to optimize the surgeon’s visualization in critical sutures. The use of micro needle holders optimizes the device’s grip on different types of needles.

e) Purpose – micro needle holders are hand-held manual surgical instrument designed to grasp a suture needle when pushing/pulling the needle and attached suture through tissue. Microneedle holders provide a secure grip, to optimize the surgeon’s visualization in critical sutures preventing the development of scar tissue.

f) Governing Body or Organization –This is regulated by the FDA

g) Other –

2) Complete generic identification – Scanlan International

3) Applicable model/make/catalog number – 3003-354

4) Manufacturer name – Scanlan International

Sources Sought Notice