36C26119Q0485-004.pdf

Multiple Custom Casework Furniture for Optic Shop and Resource Center--Woodtech (4611 Malat Street, Oakland, CA 94601) as a basis of design

a. General

Custom casework furniture, dispensing station, display cases, bookcase, privacy panel, and storage units.

See attached drawings for detail.

Note o VA Procurement furniture codes listed below as in bold print. For example: WD-1.

These codes needed for shipping identification and VA furniture installation plans.

o Overall dimensions noted below are maximums due to construction and space allowances o Required casework characteristics shall comply with below and also attached “Wood

Casework, Plastic Laminate Casework And Countertops Guide Specification”. Also casework furniture o Basis of design per Woodtech line item sheets

b. Vendoror/contractor Qualifications shall have:

Manufacturer must offer a minimum 5 year warranty that product is free from defects in materials and workmanship and Woodwork Institute accredited Millwork Company (WI AMC)

c. Warranty Requirements

Manufacturer must offer a minimum 5 year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

Manufacturer certifies that products meet or exceed applicable ANSI/BIFMA standards and testing

Manufacturer’s Work shall be in accordance with the grade or grades specified of the North American

Architectural Woodwork Standards

d. Environmental Features Product shall be constructed free of environmentally hazardous materials such as PVC, CFC, solvent-based adhesives, heavy metals (chrome, lead and mercury) and benzene Product shall be constructed free of environmentally hazardous processes such as those that produce

VOC’s and deplete ozone.

Product shall maximize recycled and recyclable materials.

Shipping packing materials shall be reusable and /or recyclable

e. Fabrication

Woodwork Institute (WI) Grade: NAAWS Premium Grade

f. Dimensions and Features shall have the following for custom cabinetry listed below:

Custom Fitting table / Dispensing Station WD-1 (Qty. 1) o Overall dimensions: 60”W x 20”D x 28” - 30”H o Table/ station shall contain a build in CPU holder cabinet with grommet at the bottom of exterior leg (Maximum 15” W) o Table/ station shall include a front skirt to conceal wire under table top o Table/ station shall include a wire/cable management, grommet solution to hide cables/wires from view under the work surface.

o Contractor shall provide a range of solid surface top and wood veneer options o Contractor shall provide a range of door handle and key core options o For additional required features see “Attachment 1- Typicals” sketches

Freestanding Illuminated Display Unit with Mirror Joiners SD-1.1 (Qty. 1) & SD-1.2 (Qty. 1) o Overall dimensions:

SD-1 – (1) 60”W x 15”D x 85”-86”H display with (2) 12”W x 15”D x 85”-86”H mirror Joiner SD-2 – (2) 48”W x 15”D x 85”-86”H display with (3) 12”W x 15”D x 85”-86”H mirror Joiner o Display unit shall include soffit with illuminated LED lighting.

o Display unit shell include cut out to access power outlets near specified locations o Display unit shall include lockable solid doors storage cabinet under countertop with a tow kick o Display unit shall include a minimum 90 frames holders per display o Display window shall include shadow reduction mirrored back with frame supports Hardware o Joiner shell include a full height mirror shall be mounted on the Joiner face o Contractor shall provide hardware to anchor display unit to the wall o Contractor shall provide a range of wood veneer options

Closed Storage Cabinet SS-2 (Qty. 1) o Overall Dimensions: 36”W x 15”D x 85”-86”H o Storage cabinet shall include (4) lockable solid doors o Storage cabinet shall include fixed and adjustable shelves o Contractor shall provide hardware to anchor storage unit to the wall o Contractor shall provide a range of wood veneer options

Closed Storage Cabinet SL-2 (Qty. 1) o Overall Dimensions: 84”W x 20” - 21”D x 28” - 30”H o Storage cabinet shall include (4) lockable solid lateral file drawers o Contractor shall provide a minimum (Grade 4) solid surface top and wood veneer options

Privacy Panel / Divider SP-2 (Qty. 1) o Overall Dimensions: 84”W x 3”D x 119” – 121”H o Wood veneer panel shall include magnetic glass dray erase board, Pegboard tool organizer, and

3Form o Contractor shall provide hardware to anchor panel to the wall and floor o Contractor shall provide a range of wood veneer, magnetic glass dray erase board, Pegboard tool organizer, and 3Form options. For additional required features see “Attachment 1- Typicals” sketches

Bookcase and Storage Cabinet SB-3 (Qty. 2) o Overall Dimensions: 72”W x 14” - 16”D x 46” - 48”H o Bookcase cabinet shall include (2) lockable doors and (1) adjustable shelves o Contractor shall provide a range of wood veneer options

g. Surface Materials

Plain sliced maple veneer –wood cabinetry and panel finish Brushed aluminum bar pulls Corian, grade D as basis of design or equal for Solid Surface 3Form Chroma paneling as a basis of design or equal Glass magnetic dry erase board – White back painted surface

Uline Metal Pegboard (model no. H-6450 96” x 48” cut to size, color grey) with starter kit (model no. H- 4292)

All finishes shall to be approved by VA interior designer before production

h. Miscellaneous

a. Vendor/contractor require to field verify dimensions of built out clinic space to ensure sizing of cabinetry and coordination with the associated data & electrical ports on site

b. Vendor/contractor shall submit shop drawings for final VA approval