36C26118Q9386-004.docx

Salient Characteristics & Specifications for Worship Chairs Department of Veterans Affairs VA Palo Alto Healthcare System 3801 Miranda Ave., Palo Alto, CA 94304

1. GENERAL

The Clinic A & B provide out-patient services for the veterans in Palo Alto. The waiting rooms are heavily used by the patients and their care takers. The carpet in both waiting rooms are heavily soiled and in need of replacement. Given the high traffic condition, heterogeneous sheet flooring is recommended as the replacement for ease of maintenance.

2. STATEMENT OF LINE REQUIREMENTS

Heterogeneous Sheet Flooring

· Withstand heavy traffic use.

· Provide the highest scratch, stain and scuff resistance in the industry.

· Dirt and stain resistant qualities for easy cleaning and maintenance.

· Wood-look flooring with dimensional edge detail for realistic bevels.

· Flooring color to be able to complement with existing furniture.

3. PRODUCT SPECIFICATION AND MEASUREMENTS

A. Armstrong Rejuvenations Timberline Diamond 10, color: Hickory Run Biscotti, or equal

· 2 meter (approx. 6’-7”) wide heterogeneous sheet flooring

· Gauge: Minimum overall thickness 2mm (0.08”)

· Wear layer: Minimum nominal 0.55mm (0.022”)

· Gloss (typical value): 60 degrees specular: approximately 2-15

· International Specifications: ASTM F 1303, Type I, Grade 1, Class B backing, ISO 10582, Type I

· Static Load Limit: 750 lbs./sq. in. (52.73 kg/cm2) ASTM F 970

· Flame Spread Fire Test Data ASTM E648- Class 1

· Smoke Evolution Fire Test Data: ASTM E662: 450 or less

· ADA Standards for Accessible Design- meet requirement for Chapter 3 Section 302.1: floor surfaces shall be stable, firm and slip-resistant

· Static Coefficient of Friction ASTM D2047/ UL410: greater or equal than 0.5

· Scratch resistance: no change on surface using an abrasive pad under a 12.5 lb load for 20 passes

· Installation method: Full Spread

· Heat welded seams to match flooring color B. Cove base and transition strips to match existing.

4. CONSTRUCTION AND FINISHING REQUIREMENTS

Heterogeneous sheet flooring

· Fiberglass-reinforced base for dimensional stability and impact/ indentation resistance

· The printed visual layer shall have realistic wood look with dimensional edge detail.

· The performance wear layer has textured surface for realistic visuals and is abrasion resistance

· The finish coating shall have the highest scratch, stain and scuff resistance in the industry

· The flooring to be maintained with a No Polish/No Buff maintenance system

· 6” cove base to match existing base.

· Transition strips to match existing. The installer shall install transition strip at any change in flooring materials.

5. ENVIRONMENTAL REQUIREMENTS

· Ortho-Phthalates Free and heavy-metal free

· ° Low VOC Emissions and FloorScore® certified

· ° Meets WELL Building Standards requirements for: Cleanable Environments, VOC Reduction, Toxic Material Reduction, Biophilia I, Qualitative and Material Transparency

· Third-party certified Environment Product Declaration (EPD)

· ° Meets requirements for LEED v4 Material Ingredient credit

· ° Recyclable through the On&On Sustainability Recycling Program

6. WARRANTY

· The warranty for the heterogeneous sheet flooring to be free from manufacturing defects for 10 years from the date of purchase.

· The warranty also covers the installation integrity of its commercial floor for five years from the date of purchase.

640-18-3-064-0190 B100 Clinic A & B Flooring Replacement Salient Feature Page 1 image1.jpeg