Boise Dental Prosthetics PWS .docx

DOCX document 26 KB Posted

Attached to
Boise VA Medical Center Dental Prosthetics
Solicitation number
36C260-27-AP-0965
Issued by

About this file

This is a Performance Work Statement (PWS) for dental prosthetics services at the Boise VA Medical Center (BVAMC). The contractor shall fabricate high-quality dental prosthetics including removable, fixed, and implant-supported prostheses, with integrated capability to simultaneously address combined treatment needs. The contractor must provide all transportation, shipping, delivery, labor, supplies, supervision, quality assurance, and materials required for fabrication. All dental prostheses must be designed, fabricated, and assembled in the United States using FDA-compliant materials meeting ANSI standards and Buy American Act requirements. Pickup and delivery occur Monday through Friday (excluding federal holidays) between 8:00 a.m. and 4:30 p.m. at 500 W Fort Street, Boise, ID 83702. Orders placed by 12:00 noon are picked up the same day; orders after noon are picked up the following business day. Standard turnaround time shall not exceed fourteen (14) business days unless mutually agreed upon in writing, with same-day repair services available for routine adjustments at no additional cost.

Product line items include fixed prosthetics (porcelain fused to metal crowns, all-ceramic crowns, metal crowns, resin-retained bridges, Captek crowns), removable prosthetics (full dentures, cast and acrylic partial dentures, flexible removable partial dentures, sleep apnea appliances, bruxism splints), implant prosthetics (crowns, bridges, removable and hybrid prostheses), and repairs and relines. All casework must be mounted on calibrated semi-adjustable articulators with compatible mounting plates, and dentures require permanently incorporated patient identification markings. The contractor must maintain a remake rate of no more than five percent per quarter and provide a written satisfaction guarantee and warranty policy. VA dental clinicians determine acceptability of all prostheses, and deficient work must be adjusted, repaired, or remade at no additional cost. The contractor shall submit invoices electronically through the Tungsten website (tungsten-network.com) no later than the 20th workday of the following month for services rendered. HIPAA compliance is required for all protected health information handling.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Performance Work Statement (PWS)

1. General:

The Contractor shall fabricate high quality dental prosthetics for the Boise VA Medical Center (BVAMC) Dental Service and provide transportation and delivery services directly to and from their Boise Idaho clinic. The Contractor shall provide dental laboratory support for the fabrication of removable, fixed, and implant prosthetics for the BVAMC Dental Service.

Pick-up and delivery location is listed below:

500 W Fort St.

Boise ID 83702 Dental Service

The Contractor shall provide all transportation, shipping, delivery, labor, supplies, supervision, quality assurance and materials required to fabricate dental prosthetics in accordance with dental laboratory prescription specifications. The Contractor shall provide all necessary shipping and packaging materials to ensure safe and secure transit.

The Contractor shall be a full-service dental laboratory that can integrate the combined treatment needs of the dental prosthetic patient requiring simultaneous fixed, removable, and implant supported prostheses.

2. Pickup and Delivery Timeliness:

The Contractor, at its own expense, shall pick up and deliver dental laboratory cases (dental laboratory prescriptions and dental laboratory case work), between the hours of 8:00am and 4:30pm, Monday – Friday, excluding federal holidays. Orders placed no later than 12:00 noon shall be picked up the same day. Orders placed after 12:00 noon shall be picked up the following business day. Deliveries are to be made Monday – Friday, excluding federal holidays, between the hours of 8:00am to 4:30pm local time, Freight On Board (FOB) destination. Dental clinic pick-up and delivery location shall be made to the appropriate BVAMC location listed in the paragraph above. The contractor shall deliver all finished orders in accordance with the laboratory’s established turnaround time. For same day repairs or relines pickup should be made by 9:30am and returned to the BVAMC Dental Clinic ready for insertion not later than 3:30pm on the same day.

Turn Around Time (TAT):

Turnaround time, or TAT is the length of elapsed time between pickup from the BVAMC Dental Clinic and delivery of the completed casework back to the appropriate BVAMC Dental Clinic. Total TAT, inclusive of any specialized outsourced services shall not exceed fourteen (14) business days unless mutually agreed upon in advance and in writing. At times an urgent need will require a faster TAT. In the event the BVAMC Dental Service desires expedited delivery, the ordering activity shall contact the Contractor and inquire into the feasibility of the expedited delivery. An expedited delivery date shall be mutually agreed upon at no extra cost to the BVAMC Dental Service. If, for any reason, the delivery time will exceed routine expected TAT or other mutually agreed upon delivery time, the Contractor shall notify the BVAMC Dental Service, in writing, as soon as possible.

3. Supplies/Services:

The Contractor shall use only materials that comply with applicable FDA requirements. All dental prostheses provided under this contract shall be designed, fabricated, and assembled in the United States.

a. All metal crowns/bridges shall be cast in high noble metal unless otherwise specified. Contractor shall specify brand and type of metal used for each case and include an Identalloy sticker for each case. All metal crowns and bridges shall be a flat fee per unit inclusive of design and metal.

b. All porcelain fused to metal crowns/bridges shall be cast in high noble metal unless otherwise specified. Contractor shall include an Identalloy sticker for each case. All porcelain fused to metal crowns and bridges shall be a flat fee per unit inclusive of design and metal.

c. The Contractor shall provide all-ceramic restorations at a flat fee per unit. Acceptable materials include Lava, Empress, EMax, or approved equivalents. The unit price shall include all design, fabrication, and material costs, including any required metal components.

d. Unless otherwise specified by the prescribing provider, the Contractor shall fabricate metal partial denture frameworks using Vitallium, Vitallium 2000, or an approved equivalent alloy. The unit price for each framework shall include design, metal, necessary wrought wire clasps, and modification spaces. The Contractor shall identify the brand and type of metal used for each case and include an Identalloy sticker with the completed framework.

e. Unless otherwise specified by the prescribing provider, the Contractor shall fabricate full and partial dentures using Portrait IPN teeth (or an approved equivalent) and Lucitone 199 acrylic. All dentures shall include permanently incorporated patient identification markings in accordance with the requirements of this PWS.

f. The Contractor shall mount all applicable cases on calibrated semi-adjustable articulators. Exceptions include crowns and fixed partial dentures submitted with a triple-tray impression, occlusal guards unless otherwise specified by the prescribing provider, and digitally submitted cases. The Contractor shall not use small plastic ("snake bite") articulators for VA cases.

g. The Contractor shall fabricate cases using mounting plates compatible with the Hanau semi-adjustable calibrated articulators utilized by the BVAMC Dental Service. All applicable cases shall be returned mounted on compatible mounting plates.

h. The Contractor shall use materials that comply with all applicable U.S. Food and Drug Administration (FDA) regulations, American National Standards Institute (ANSI) standards, and Buy American Act requirements. All dental prostheses provided under this contract shall be designed, fabricated, manufactured, and/or assembled in the United States using materials approved for dental prosthetic use within the United States.

i. Unless otherwise specified in the prescription, the Contractor shall permanently incorporate the patient’s last name into all full dentures and acrylic partial dentures. Identification markings shall be legible, durable, and cosmetically acceptable. The location and method of marking shall be determined by the prescribing dentist or fabricating dental laboratory. Identification markings may be omitted when clinically indicated or impractical.

j. The Contractor shall provide same-day pickup, repair, and return of dental prosthetic cases when clinically and technically feasible. The Contractor shall promptly notify the BVAMC Dental Service when a repair or reline cannot be completed the same day. Covered services include, but are not limited to, hard denture relines, denture repairs, tooth replacement, addition of teeth or wrought wire clasps, denture base repairs, and color matching.

k. The Contractor shall make same-day repair services available for defective prostheses at no additional cost to the Government. Covered repairs include, but are not limited to, open contact repairs, re-polishing, re-glazing, minor shade corrections, pontic reshaping, and porcelain chip repairs.

l. The Contractor shall accommodate Veterans who must physically visit the dental laboratory for custom shading, fitting, or other prosthetic procedures necessary to complete a prescribed dental prosthesis. When determined to be beneficial to the Veteran, the Government may direct the Veteran to the laboratory for such services. The Contractor shall provide these services at no additional cost to the Government.

Product Line Items

Fixed Prosthetics Porcelain fused to metal crown, retainer or pontic Full or partial coverage all ceramic and full metal crown, retainer or pontic Rest/guide plane of any design for any of above, per tooth Resin retained bridge Additional pontic for resin retained bridge Additional retainer for resin retained bridge.

Captek crown, retainer or pontic

Removable Prosthetics Full dentures Cast and acrylic partial dentures Flexible removable partial dentures Sleep Apnea appliance Bruxism splints Repairs and relines

Implant Prosthetics Crown and bridge prosthesis Removable prosthesis Hybrid prosthesis

4. Packaging:

The Contractor shall deliver each dental prosthesis or framework in a sealed, transparent envelope with an attached service ticket identifying the prescription, product/service, patient name, and case number. All items shall be disinfected in accordance with current dental laboratory standards. External packaging shall not display PHI or PII and shall adequately protect contents from damage during handling and shipment.

5. Sub-contracting:

Any secondary dental laboratory utilized by the Contractor as a subcontractor shall comply with all requirements, standards, and performance expectations set forth in this Performance Work Statement (PWS).

6. Quality Control:

The Contractor shall maintain a prosthesis remake rate of no more than 5 percent per quarter. The Government will assess performance through quarterly monitoring of remake rates conducted by the Dental Clinic POC. The Government may evaluate the quality and timeliness of supplies and services provided

7. Quality/Workmanship:

VA dental clinicians shall determine the acceptability of all prostheses. Prostheses deemed unacceptable due to deficiencies in fit, finish, esthetics, function, patient comfort, or patient satisfaction shall be adjusted, repaired, or remade by the Contractor at no additional cost to the Government. The Contractor shall provide a written satisfaction guarantee, warranty, adjustment/remake policy, warranty exclusions, and a description of its quality control program.

8. Qualifications:

The Contractor shall maintain and provide proof of all certifications and licenses required to perform the services in accordance with applicable laws, regulations, and industry standards. Certification by the National Board for Certification in Dental Laboratory Technology as a Certified Dental Laboratory (CDL) and Certified Dental Technician (CDT) is preferred but not required.

9. Confidentiality of Patient Records:

In accordance with 45 C.F.R. Parts 160, 162, and 164 (Health Insurance Portability and Accountability Act) and 38 U.S.C. 5701, 38 U.S.C. 7332, 5 U.S.C. 552a (Privacy Act), the Parties agree to hold all individually identifiable health information as that term is defined in the Health Insurance Portability and Accountability Act and regulations promulgated there under (collectively, “HIPAA”) shared with, transferred or transmitted to, or otherwise obtained by the contractor on or from or on behalf of the VA in the course of contractor providing the supplies/services under this Agreement (“Protected Health Information”) strictly confidential, and provide protections to prevent the unauthorized disclosure of such information, including, but not limited to the protection required by applicable federal, state and local laws and/or regulations regarding the security and the confidentiality of patient health care information including, but not limited to, HIPAA. Specifically, contractor agrees as follows: (1) to maintain safeguards as necessary to ensure that the Protected Health Information is not used or disclosed except as required to perform its obligations under the Agreement, as expressly permitted herein or as required or permitted by law; (2) to ensure that any subcontracts or agents to whom it provides Protected Health Information agree to the same restrictions and conditions that apply with respect to such information; (3) to make available its internal practices, books and records relating to the use and disclosure of Protected Health Information to the Department of Health and Human Services or its agents as required by HIPAA; (4) to incorporate any amendments or corrections to Protected Health Information when notified by the VA that the information is inaccurate or incomplete; (5) at termination of this Agreement, if feasible, to return or destroy all Protected Health Information in any form; (6) to ensure that, as to any Protected Health Information held by the contractor, policies are in place to allow access to that Protected Health Information by the subject of that information as required by HIPAA; and (7) to report to the VA any use or disclosure of Protected Health Information which is not allowed under the terms of the Agreement. If at any time after the effective date of this Agreement it is determined that either party is in breach of this Section, the other party, in its sole discretion, may immediately terminate this Agreement.

10. Contract Administration:

Invoices will be electronically submitted to the Tungsten website at https://www.tungsten-network.com/us/support/. Tungsten direct vendor support number is 877-489-6135 for VA contracts. The VA-FSC pays all associated transaction fees for VA orders. During Implementation (technical set-up) Tungsten will confirm your Taxpayer ID Number with the VA-FSC. This process can take up to 5 business days to complete to ensure your invoice is automatically routed to your Certifying Official for approval and payment. In order to successfully submit an invoice to VA-FSC please review “How to Create an Invoice” within the how to guides. All invoices submitted through Tungsten to the VA-FSC should mirror your current submission of Invoice, with the following items required. Clarification of additional requirements should be confirmed with your Certifying Official (your CO or buyer). The VA- FSC requires specific information in compliance with the Prompt Pay Act and Business Requirements. For additional information, please contact:

Tungsten Support: Phone: 1-877-489-6135 Website: Support | Tungsten Network (tungsten-network.com) Contractor shall submit invoices no later than the 20th workday of the following month in which services were rendered to the following addresses:

Address: 500 W Fort St., Boise ID, 83702 Copy to: Dental POC Name:

11. Place of Performance:

All contract dental lab services will be performed at the contract dental lab site or it’s specialized subcontractors. The contract dental lab will travel to the BVAMC Dental Clinics in Boise ID to pick-up and deliver lab cases. All cases shall be picked up/delivered in the Dental clinic location as defined in section 1, not in the facility mail room. These travel costs are to be considered by the contract dental lab in their fee schedule.

File details come from the government source that posted it. Updated .