36C26026Q0938.docx
DOCX document 16 KB Posted
- Attached to
- 6640--High Pressure Homogenizer
- Solicitation number
- 36C26026Q0938
About this file
This is a Sources Sought Notice issued by the Department of Veterans Affairs (VA), Network Contracting Office (NCO) 20, for market research purposes to identify qualified vendors for a potential future procurement. The VA is seeking information from interested vendors who can provide a bench top laboratory scale high pressure homogenizer with specific technical specifications. The equipment must feature a 316 stainless steel heat exchanger (HPE150 model), a diamond interaction chamber with cooling capability, a flow rate of approximately 60mL/min, maximum pressure of 45,000 psi, and accommodate sample sizes as small as 5mL with approximately 3mL recovery. Additional required specifications include dual voltage capability (110V/220V, single phase 50/60Hz), PLC touch screen display with dual speed and pressure mode, 500mL stainless steel feed reservoir with replaceable 100mL plastic syringe option, high pressure ceramic plunger, UHMWPE plunger seal, emergency stop switch, and sanitary material construction for all wetted parts.
Interested vendors must respond by August 25, 2026, at 9:00 AM Pacific Time via email to Contracting Officer Angela Williams (angela.williams3@va.gov) at the contracting office in Vancouver, Washington (ZIP 98661). Vendors must provide an authorized dealer letter and descriptive literature for products manufactured in the United States in accordance with FAR 52.225-1. Vendors with existing GSA contracts for this equipment should include the contract number and expiration date in their response. This notice is for market research only; no formal solicitation is currently available, and the government may or may not issue a future solicitation based on the results. The Product Service Code is 6640 and NAICS Code is 334517. Telephone inquiries will not be accepted, though negative responses are appreciated but not required.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sources Sought Notice Sources Sought Notice
| SUBJECT* |
| High Pressure Homogenizer |
GENERAL INFORMATION
| CONTRACTING OFFICE’S ZIP CODE* |
| 98661 |
| SOLICITATION NUMBER* |
| 36C26026Q0938 |
| RESPONSE DATE/TIME/ZONE |
| 08-25-2026 9:00 PACIFIC TIME, LOS ANGELES, USA |
| ARCHIVE |
| 30 DAYS AFTER THE RESPONSE DATE |
| RECOVERY ACT FUNDS |
| N |
SET-ASIDE
| PRODUCT SERVICE CODE* |
| 6640 |
| NAICS CODE* |
| 334517 |
| CONTRACTING OFFICE ADDRESS |
| NCO 20 Network Contracting O |
ATTN: V4CONT
1601 E. Fourth Plain Blvd Bldg.17, Suite B428 Vancouver WA 98661
POINT OF CONTACT*
Contracting Officer Angela Williams angela.williams3@va.gov
PLACE OF PERFORMANCE
ADDRESS
POSTAL CODE
COUNTRY
ADDITIONAL INFORMATION
AGENCY’S URL
URL DESCRIPTION
AGENCY CONTACT’S EMAIL ADDRESS
EMAIL DESCRIPTION
DESCRIPTION
This notice is issued solely for market research purposes. Its intent is to identify qualified and capable sources for a potential future requirement. The information received will assist the Government in determining an appropriate acquisition strategy.
This is not solicitation, and no solicitation is currently available. The Government may or may not issue a solicitation based on the results of this notice.
The Department of Veterans Affairs (VA), Network Contracting Office (NCO) 20, is seeking information from interested and qualified vendors who can provide the required equipment. Vendors must be able to furnish an authorized dealer letter and descriptive literature for products that are manufactured in the United States, in accordance with FAR 52.225‑1.
Bench Top Laboratory Scale High Pressure Homogenizer
1. 316 S/S heat exchanger for cooling, HPE150
2. Core part: Diamond Interaction Chamber with cooling option
3. Flow rate: ~60mL/min (water value)
4. Min. sample size: 5 mL, with ~3 mL recovery
5. Max pressure: 45,000 psi
6. Power requirement: 110V/220V, single phase 50/60Hz
7. Dimensions: 70×36 ×30 cm
8. Weight: ~40 kg
9. PLC touch screen display with: Dual speed and pressure mode - Pressure control and indication - Flow rate - Auto stop control by cycle passes and time, settable stroke volume as low as 5Ml – Overload protection
10. Feed reservoir: 500mL, stainless steel - the plastic syringe (100mL) can be replaced when sample volume is limited.
11. High pressure ceramic plunger
12. UHMWPE plunger seal
13. Emergency stop switch
14. Tool & Spare
15. CE & ROHS
16. All the wetting parts are sanitary material
If you are able to provide this, please reply via email to me by 9:00 AM Noon Pacific Time, August 25, 2026. If you have this on a GSA contract, please provide the contract number and the expiration date.
No telephone inquiries will be accepted. Negative responses are appreciated, but not necessary.
| *= Required Field |
| Sources Sought Notice |
Sources Sought Notice
File details come from the government source that posted it. Updated .